Merge tag 'pinctrl-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "It is pretty calm and chill in pin control for the moment. Just
  incremental development.

  There is an odd patch to the Super-H architecture, it's coming from
  the maintainers so should be fine.

  Summary:

  New drivers:
   - Bitmain BM1880 pin controller
   - Mediatek MT8516
   - Cirrus Logich Lochnagar PMIC pins

  Updates:
   - Incremental development on Renesas SH-PFC
   - Incremental development on Intel pin controller and some particular
     updates for Cedarfork.
   - Pin configuration support in Allwinner SunXi drivers
   - Suspend/resume support in the NXP/Freescale i.MX8MQ driver
   - Support for more packaging of the ST Micro STM32"

* tag 'pinctrl-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
  pinctrl: mcp23s08: Do not complain about unsupported params
  pinctrl: Rework Kconfig dependency for BM1880 pinctrl driver
  MAINTAINERS: Add entry for BM1880 pinctrl
  pinctrl: Add pinctrl support for BM1880 SoC
  dt-bindings: pinctrl: Add BM1880 pinctrl binding
  pinctrl: stm32: check irq controller availability at probe
  pinctrl: mediatek: Add MT8516 Pinctrl driver
  pinctrl: zte: fix leaked of_node references
  pinctrl: intel: Increase readability of intel_gpio_update_pad_mode()
  pinctrl: intel: Retain HOSTSW_OWN for requested gpio pin
  pinctrl: pistachio: fix leaked of_node references
  pinctrl: sunxi: Support I/O bias voltage setting on H6
  pinctrl: sunxi: Prepare for alternative bias voltage setting methods
  pinctrl: st: fix leaked of_node references
  pinctrl: samsung: fix leaked of_node references
  pinctrl: stm32: align stm32mp157 pin names
  pinctrl: stm32: add package information for stm32mp157c
  pinctrl: stm32: introduce package support
  dt-bindings: pinctrl: stm32: add new entry for package information
  pinctrl: imx8mq: Add suspend/resume ops
  ...

Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt

+Bitmain BM1880 Pin Controller
+
+This binding describes the pin controller found in the BM1880 SoC.
+
+Required Properties:
+
+- compatible:   Should be "bitmain,bm1880-pinctrl"
+- reg:          Offset and length of pinctrl space in SCTRL.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration for BM1880 SoC
+includes only pinmux as there is no pinconf support available in SoC.
+
+Each configuration node can consist of multiple nodes describing the pinmux
+options. The name of each subnode is not important; all subnodes should be
+enumerated and processed purely based on their content.
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pinmux subnode:
+
+Required Properties:
+
+- pins:           An array of strings, each string containing the name of a pin.
+                  Valid values for pins are:
+
+                  MIO0 - MIO111
+
+- groups:         An array of strings, each string containing the name of a pin
+                  group. Valid values for groups are:
+
+                  nand_grp, spi_grp, emmc_grp, sdio_grp, eth0_grp, pwm0_grp,
+                  pwm1_grp, pwm2_grp, pwm3_grp, pwm4_grp, pwm5_grp, pwm6_grp,
+                  pwm7_grp, pwm8_grp, pwm9_grp, pwm10_grp, pwm11_grp, pwm12_grp,
+                  pwm13_grp, pwm14_grp, pwm15_grp, pwm16_grp, pwm17_grp,
+                  pwm18_grp, pwm19_grp, pwm20_grp, pwm21_grp, pwm22_grp,
+                  pwm23_grp, pwm24_grp, pwm25_grp, pwm26_grp, pwm27_grp,
+                  pwm28_grp, pwm29_grp, pwm30_grp, pwm31_grp, pwm32_grp,
+                  pwm33_grp, pwm34_grp, pwm35_grp, pwm36_grp, i2c0_grp,
+                  i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, uart0_grp, uart1_grp,
+                  uart2_grp, uart3_grp, uart4_grp, uart5_grp, uart6_grp,
+                  uart7_grp, uart8_grp, uart9_grp, uart10_grp, uart11_grp,
+                  uart12_grp, uart13_grp, uart14_grp, uart15_grp, gpio0_grp,
+                  gpio1_grp, gpio2_grp, gpio3_grp, gpio4_grp, gpio5_grp,
+                  gpio6_grp, gpio7_grp, gpio8_grp, gpio9_grp, gpio10_grp,
+                  gpio11_grp, gpio12_grp, gpio13_grp, gpio14_grp, gpio15_grp,
+                  gpio16_grp, gpio17_grp, gpio18_grp, gpio19_grp, gpio20_grp,
+                  gpio21_grp, gpio22_grp, gpio23_grp, gpio24_grp, gpio25_grp,
+                  gpio26_grp, gpio27_grp, gpio28_grp, gpio29_grp, gpio30_grp,
+                  gpio31_grp, gpio32_grp, gpio33_grp, gpio34_grp, gpio35_grp,
+                  gpio36_grp, gpio37_grp, gpio38_grp, gpio39_grp, gpio40_grp,
+                  gpio41_grp, gpio42_grp, gpio43_grp, gpio44_grp, gpio45_grp,
+                  gpio46_grp, gpio47_grp, gpio48_grp, gpio49_grp, gpio50_grp,
+                  gpio51_grp, gpio52_grp, gpio53_grp, gpio54_grp, gpio55_grp,
+                  gpio56_grp, gpio57_grp, gpio58_grp, gpio59_grp, gpio60_grp,
+                  gpio61_grp, gpio62_grp, gpio63_grp, gpio64_grp, gpio65_grp,
+                  gpio66_grp, gpio67_grp, eth1_grp, i2s0_grp, i2s0_mclkin_grp,
+                  i2s1_grp, i2s1_mclkin_grp, spi0_grp
+
+- function:       An array of strings, each string containing the name of the
+                  pinmux functions. The following are the list of pinmux
+                  functions available:
+
+                  nand, spi, emmc, sdio, eth0, pwm0, pwm1, pwm2, pwm3, pwm4,
+                  pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, pwm12, pwm13,
+                  pwm14, pwm15, pwm16, pwm17, pwm18, pwm19, pwm20, pwm21, pwm22,
+                  pwm23, pwm24, pwm25, pwm26, pwm27, pwm28, pwm29, pwm30, pwm31,
+                  pwm32, pwm33, pwm34, pwm35, pwm36, i2c0, i2c1, i2c2, i2c3,
+                  i2c4, uart0, uart1, uart2, uart3, uart4, uart5, uart6, uart7,
+                  uart8, uart9, uart10, uart11, uart12, uart13, uart14, uart15,
+                  gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, gpio8,
+                  gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, gpio15, gpio16,
+                  gpio17, gpio18, gpio19, gpio20, gpio21, gpio22, gpio23,
+                  gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30,
+                  gpio31, gpio32, gpio33, gpio34, gpio35, gpio36, gpio37,
+                  gpio38, gpio39, gpio40, gpio41, gpio42, gpio43, gpio44,
+                  gpio45, gpio46, gpio47, gpio48, gpio49, gpio50, gpio51,
+                  gpio52, gpio53, gpio54, gpio55, gpio56, gpio57, gpio58,
+                  gpio59, gpio60, gpio61, gpio62, gpio63, gpio64, gpio65,
+                  gpio66, gpio67, eth1, i2s0, i2s0_mclkin, i2s1, i2s1_mclkin,
+                  spi0
+
+Example:
+        pinctrl: pinctrl@50 {
+                compatible = "bitmain,bm1880-pinctrl";
+                reg = <0x50 0x4B0>;
+
+                pinctrl_uart0_default: uart0-default {
+                        pinmux {
+                                groups = "uart0_grp";
+                                function = "uart0";
+                        };
+                };
+        };

Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt

+Cirrus Logic Lochnagar Audio Development Board
+
+Lochnagar is an evaluation and development board for Cirrus Logic
+Smart CODEC and Amp devices. It allows the connection of most Cirrus
+Logic devices on mini-cards, as well as allowing connection of
+various application processor systems to provide a full evaluation
+platform.  Audio system topology, clocking and power can all be
+controlled through the Lochnagar, allowing the device under test
+to be used in a variety of possible use cases.
+
+This binding document describes the binding for the pinctrl portion
+of the driver.
+
+Also see these documents for generic binding information:
+  [1] GPIO : ../gpio/gpio.txt
+  [2] Pinctrl: ../pinctrl/pinctrl-bindings.txt
+
+And these for relevant defines:
+  [3] include/dt-bindings/pinctrl/lochnagar.h
+
+This binding must be part of the Lochnagar MFD binding:
+  [4] ../mfd/cirrus,lochnagar.txt
+
+Required properties:
+
+  - compatible : One of the following strings:
+                 "cirrus,lochnagar-pinctrl"
+
+  - gpio-controller : Indicates this device is a GPIO controller.
+  - #gpio-cells : Must be 2. The first cell is the pin number, see
+    [3] for available pins and the second cell is used to specify
+    optional parameters, see [1].
+  - gpio-ranges : Range of pins managed by the GPIO controller, see
+    [1]. Both the GPIO and Pinctrl base should be set to zero and the
+    count to the appropriate of the LOCHNAGARx_PIN_NUM_GPIOS define,
+    see [3].
+
+  - pinctrl-names : A pinctrl state named "default" must be defined.
+  - pinctrl-0 : A phandle to the default pinctrl state.
+
+Required sub-nodes:
+
+The pin configurations are defined as a child of the pinctrl states
+node, see [2]. Each sub-node can have the following properties:
+  - groups : A list of groups to select (either this or "pins" must be
+    specified), available groups:
+      codec-aif1, codec-aif2, codec-aif3, dsp-aif1, dsp-aif2, psia1,
+      psia2, gf-aif1, gf-aif2, gf-aif3, gf-aif4, spdif-aif, usb-aif1,
+      usb-aif2, adat-aif, soundcard-aif
+  - pins : A list of pin names to select (either this or "groups" must
+    be specified), available pins:
+      fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4, fpga-gpio5,
+      fpga-gpio6, codec-gpio1, codec-gpio2, codec-gpio3, codec-gpio4,
+      codec-gpio5, codec-gpio6, codec-gpio7, codec-gpio8, dsp-gpio1,
+      dsp-gpio2, dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6, gf-gpio2,
+      gf-gpio3, gf-gpio7, codec-aif1-bclk, codec-aif1-rxdat,
+      codec-aif1-lrclk, codec-aif1-txdat, codec-aif2-bclk,
+      codec-aif2-rxdat, codec-aif2-lrclk, codec-aif2-txdat,
+      codec-aif3-bclk, codec-aif3-rxdat, codec-aif3-lrclk,
+      codec-aif3-txdat, dsp-aif1-bclk, dsp-aif1-rxdat, dsp-aif1-lrclk,
+      dsp-aif1-txdat, dsp-aif2-bclk, dsp-aif2-rxdat,
+      dsp-aif2-lrclk, dsp-aif2-txdat, psia1-bclk, psia1-rxdat,
+      psia1-lrclk, psia1-txdat, psia2-bclk, psia2-rxdat, psia2-lrclk,
+      psia2-txdat, gf-aif3-bclk, gf-aif3-rxdat, gf-aif3-lrclk,
+      gf-aif3-txdat, gf-aif4-bclk, gf-aif4-rxdat, gf-aif4-lrclk,
+      gf-aif4-txdat, gf-aif1-bclk, gf-aif1-rxdat, gf-aif1-lrclk,
+      gf-aif1-txdat, gf-aif2-bclk, gf-aif2-rxdat, gf-aif2-lrclk,
+      gf-aif2-txdat, dsp-uart1-rx, dsp-uart1-tx, dsp-uart2-rx,
+      dsp-uart2-tx, gf-uart2-rx, gf-uart2-tx, usb-uart-rx,
+      codec-pdmclk1, codec-pdmdat1, codec-pdmclk2, codec-pdmdat2,
+      codec-dmicclk1, codec-dmicdat1, codec-dmicclk2, codec-dmicdat2,
+      codec-dmicclk3, codec-dmicdat3, codec-dmicclk4, codec-dmicdat4,
+      dsp-dmicclk1, dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, i2c2-scl,
+      i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda, dsp-standby,
+      codec-mclk1, codec-mclk2, dsp-clkin, psia1-mclk, psia2-mclk,
+      gf-gpio1, gf-gpio5, dsp-gpio20, led1, led2
+  - function : The mux function to select, available functions:
+      aif, fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4, fpga-gpio5,
+      fpga-gpio6, codec-gpio1, codec-gpio2, codec-gpio3, codec-gpio4,
+      codec-gpio5, codec-gpio6, codec-gpio7, codec-gpio8, dsp-gpio1,
+      dsp-gpio2, dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6, gf-gpio2,
+      gf-gpio3, gf-gpio7, gf-gpio1, gf-gpio5, dsp-gpio20, codec-clkout,
+      dsp-clkout, pmic-32k, spdif-clkout, clk-12m288, clk-11m2986,
+      clk-24m576, clk-22m5792, xmos-mclk, gf-clkout1, gf-mclk1,
+      gf-mclk3, gf-mclk2, gf-clkout2, codec-mclk1, codec-mclk2,
+      dsp-clkin, psia1-mclk, psia2-mclk, spdif-mclk, codec-irq,
+      codec-reset, dsp-reset, dsp-irq, dsp-standby, codec-pdmclk1,
+      codec-pdmdat1, codec-pdmclk2, codec-pdmdat2, codec-dmicclk1,
+      codec-dmicdat1, codec-dmicclk2, codec-dmicdat2, codec-dmicclk3,
+      codec-dmicdat3, codec-dmicclk4, codec-dmicdat4, dsp-dmicclk1,
+      dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, dsp-uart1-rx,
+      dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx, gf-uart2-rx,
+      gf-uart2-tx, usb-uart-rx, usb-uart-tx, i2c2-scl, i2c2-sda,
+      i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda, spdif-aif, psia1,
+      psia1-bclk, psia1-lrclk, psia1-rxdat, psia1-txdat, psia2,
+      psia2-bclk, psia2-lrclk, psia2-rxdat, psia2-txdat, codec-aif1,
+      codec-aif1-bclk, codec-aif1-lrclk, codec-aif1-rxdat,
+      codec-aif1-txdat, codec-aif2, codec-aif2-bclk, codec-aif2-lrclk,
+      codec-aif2-rxdat, codec-aif2-txdat, codec-aif3, codec-aif3-bclk,
+      codec-aif3-lrclk, codec-aif3-rxdat, codec-aif3-txdat, dsp-aif1,
+      dsp-aif1-bclk, dsp-aif1-lrclk, dsp-aif1-rxdat, dsp-aif1-txdat,
+      dsp-aif2, dsp-aif2-bclk, dsp-aif2-lrclk, dsp-aif2-rxdat,
+      dsp-aif2-txdat, gf-aif3, gf-aif3-bclk, gf-aif3-lrclk,
+      gf-aif3-rxdat, gf-aif3-txdat, gf-aif4, gf-aif4-bclk,
+      gf-aif4-lrclk, gf-aif4-rxdat, gf-aif4-txdat, gf-aif1,
+      gf-aif1-bclk, gf-aif1-lrclk, gf-aif1-rxdat, gf-aif1-txdat,
+      gf-aif2, gf-aif2-bclk, gf-aif2-lrclk, gf-aif2-rxdat,
+      gf-aif2-txdat, usb-aif1, usb-aif2, adat-aif, soundcard-aif,
+
+  - output-enable : Specifies that an AIF group will be used as a master
+    interface (either this or input-enable is required if a group is
+    being muxed to an AIF)
+  - input-enable : Specifies that an AIF group will be used as a slave
+    interface (either this or output-enable is required if a group is
+    being muxed to an AIF)
+
+Example:
+
+lochnagar-pinctrl {
+	compatible = "cirrus,lochnagar-pinctrl";
+
+	gpio-controller;
+	#gpio-cells = <2>;
+	gpio-ranges = <&lochnagar 0 0 LOCHNAGAR2_PIN_NUM_GPIOS>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pin-settings>;
+
+	pin-settings: pin-settings {
+		ap-aif {
+			input-enable;
+			groups = "gf-aif1";
+			function = "codec-aif3";
+		};
+		codec-aif {
+			output-enable;
+			groups = "codec-aif3";
+			function = "gf-aif1";
+		};
+	};
+};

Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt

@@ -48,9 +48,9 @@ PAD_CTL_HYS                     (1 << 3)
 PAD_CTL_SRE_SLOW                (1 << 2)
 PAD_CTL_SRE_FAST                (0 << 2)
 PAD_CTL_DSE_X1                  (0 << 0)
-PAD_CTL_DSE_X2                  (1 << 0)
-PAD_CTL_DSE_X3                  (2 << 0)
-PAD_CTL_DSE_X4                  (3 << 0)
+PAD_CTL_DSE_X4                  (1 << 0)
+PAD_CTL_DSE_X2                  (2 << 0)
+PAD_CTL_DSE_X6                  (3 << 0)
 
 Examples:
 While iomuxc-lpsr is intended to be used by dedicated peripherals to take

Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt

@@ -11,6 +11,7 @@ Required properties:
 	"mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl.
 	"mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl.
 	"mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl.
+	"mediatek,mt8516-pinctrl", compatible with mt8516 pinctrl.
 - pins-are-numbered: Specify the subnodes are using numbered pinmux to
   specify pins.
 - gpio-controller : Marks the device node as a gpio controller.

Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt

+* Mediatek MT8183 Pin Controller
+
+The Mediatek's Pin controller is used to control SoC pins.
+
+Required properties:
+- compatible: value should be one of the following.
+	"mediatek,mt8183-pinctrl", compatible with mt8183 pinctrl.
+- gpio-controller : Marks the device node as a gpio controller.
+- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
+  binding is used, the amount of cells must be specified as 2. See the below
+  mentioned gpio binding representation for description of particular cells.
+- gpio-ranges : gpio valid number range.
+- reg: physical address base for gpio base registers. There are 10 GPIO
+  physical address base in mt8183.
+
+Optional properties:
+- reg-names: gpio base register names. There are 10 gpio base register
+  names in mt8183. They are "iocfg0", "iocfg1", "iocfg2", "iocfg3", "iocfg4",
+  "iocfg5", "iocfg6", "iocfg7", "iocfg8", "eint".
+- interrupt-controller: Marks the device node as an interrupt controller
+- #interrupt-cells: Should be two.
+- interrupts : The interrupt outputs to sysirq.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices.
+
+Subnode format
+A pinctrl node should contain at least one subnodes representing the
+pinctrl groups available on the machine. Each subnode will list the
+pins it needs, and how they should be configured, with regard to muxer
+configuration, pullups, drive strength, input enable/disable and input schmitt.
+
+    node {
+	pinmux = <PIN_NUMBER_PINMUX>;
+	GENERIC_PINCONFIG;
+    };
+
+Required properties:
+- pinmux: integer array, represents gpio pin number and mux setting.
+    Supported pin number and mux varies for different SoCs, and are defined
+    as macros in boot/dts/<soc>-pinfunc.h directly.
+
+Optional properties:
+- GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable,
+    bias-pull-down, bias-pull-up, input-enable, input-disable, output-low,
+    output-high, input-schmitt-enable, input-schmitt-disable
+    and drive-strength are valid.
+
+    Some special pins have extra pull up strength, there are R0 and R1 pull-up
+    resistors available, but for user, it's only need to set R1R0 as 00, 01,
+    10 or 11. So It needs config "mediatek,pull-up-adv" or
+    "mediatek,pull-down-adv" to support arguments for those special pins.
+    Valid arguments are from 0 to 3.
+
+    mediatek,tdsel: An integer describing the steps for output level shifter
+      duty cycle when asserted (high pulse width adjustment). Valid arguments
+      are from 0 to 15.
+    mediatek,rdsel: An integer describing the steps for input level shifter
+      duty cycle when asserted (high pulse width adjustment). Valid arguments
+      are from 0 to 63.
+
+    When config drive-strength, it can support some arguments, such as
+    MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h.
+    It can only support 2/4/6/8/10/12/14/16mA in mt8183.
+    For I2C pins, there are existing generic driving setup and the specific
+    driving setup. I2C pins can only support 2/4/6/8/10/12/14/16mA driving
+    adjustment in generic driving setup. But in specific driving setup,
+    they can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
+    driving setup for I2C pins, the existing generic driving setup will be
+    disabled. For some special features, we need the I2C pins specific
+    driving setup. The specific driving setup is controlled by E1E0EN.
+    So we need add extra vendor driving preperty instead of
+    the generic driving property.
+    We can add "mediatek,drive-strength-adv = <XXX>;" to describe the specific
+    driving setup property. "XXX" means the value of E1E0EN. EN is 0 or 1.
+    It is used to enable or disable the specific driving setup.
+    E1E0 is used to describe the detail strength specification of the I2C pin.
+    When E1=0/E0=0, the strength is 0.125mA.
+    When E1=0/E0=1, the strength is 0.25mA.
+    When E1=1/E0=0, the strength is 0.5mA.
+    When E1=1/E0=1, the strength is 1mA.
+    So the valid arguments of "mediatek,drive-strength-adv" are from 0 to 7.
+
+Examples:
+
+#include "mt8183-pinfunc.h"
+
+...
+{
+	pio: pinctrl@10005000 {
+		compatible = "mediatek,mt8183-pinctrl";
+		reg = <0 0x10005000 0 0x1000>,
+		      <0 0x11f20000 0 0x1000>,
+		      <0 0x11e80000 0 0x1000>,
+		      <0 0x11e70000 0 0x1000>,
+		      <0 0x11e90000 0 0x1000>,
+		      <0 0x11d30000 0 0x1000>,
+		      <0 0x11d20000 0 0x1000>,
+		      <0 0x11c50000 0 0x1000>,
+		      <0 0x11f30000 0 0x1000>,
+		      <0 0x1000b000 0 0x1000>;
+		reg-names = "iocfg0", "iocfg1", "iocfg2",
+			    "iocfg3", "iocfg4", "iocfg5",
+			    "iocfg6", "iocfg7", "iocfg8",
+			    "eint";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pio 0 0 192>;
+		interrupt-controller;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+
+		i2c0_pins_a: i2c0 {
+			pins1 {
+				pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
+					 <PINMUX_GPIO49__FUNC_SDA5>;
+				mediatek,pull-up-adv = <3>;
+				mediatek,drive-strength-adv = <7>;
+			};
+		};
+
+		i2c1_pins_a: i2c1 {
+			pins {
+				pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
+					 <PINMUX_GPIO51__FUNC_SDA3>;
+				mediatek,pull-down-adv = <2>;
+				mediatek,drive-strength-adv = <4>;
+			};
+		};
+		...
+	};
+};

Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt

@@ -57,6 +57,8 @@ Optional properties:
  - st,bank-ioport: should correspond to the EXTI IOport selection (EXTI line
    used to select GPIOs as interrupts).
  - hwlocks: reference to a phandle of a hardware spinlock provider node.
+ - st,package: Indicates the SOC package used.
+   More details in include/dt-bindings/pinctrl/stm32-pinfunc.h
 
 Example 1:
 #include <dt-bindings/pinctrl/stm32f429-pinfunc.h>

MAINTAINERS

@@ -1418,7 +1418,9 @@ M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm64/boot/dts/bitmain/
+F:	drivers/pinctrl/pinctrl-bm1880.c
 F:	Documentation/devicetree/bindings/arm/bitmain.yaml
+F:	Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt
 
 ARM/CALXEDA HIGHBANK ARCHITECTURE
 M:	Rob Herring <robh@kernel.org>

arch/sh/include/cpu-sh4/cpu/sh7786.h

@@ -132,7 +132,7 @@ enum {
 
 static inline u32 sh7786_mm_sel(void)
 {
-	return __raw_readl(0xFC400020) & 0x7;
+	return __raw_readl((const volatile void __iomem *)0xFC400020) & 0x7;
 }
 
 #endif /* __CPU_SH7786_H__ */

drivers/gpio/gpiolib-devprop.c

@@ -10,6 +10,7 @@
 #include <linux/slab.h>
 #include <linux/gpio/consumer.h>
 #include <linux/gpio/driver.h>
+#include <linux/export.h>
 
 #include "gpiolib.h"
 
@@ -56,3 +57,4 @@ void devprop_gpiochip_set_names(struct gpio_chip *chip,
 
 	kfree(names);
 }
+EXPORT_SYMBOL_GPL(devprop_gpiochip_set_names);

drivers/gpio/gpiolib.h

@@ -243,9 +243,6 @@ static inline int gpio_chip_hwgpio(const struct gpio_desc *desc)
 	return desc - &desc->gdev->descs[0];
 }
 
-void devprop_gpiochip_set_names(struct gpio_chip *chip,
-				const struct fwnode_handle *fwnode);
-
 /* With descriptor prefix */
 
 #define gpiod_emerg(desc, fmt, ...)					       \

drivers/pinctrl/Kconfig

@@ -108,6 +108,14 @@ config PINCTRL_AMD
 	  Requires ACPI/FDT device enumeration code to set up a platform
 	  device.
 
+config PINCTRL_BM1880
+	bool "Bitmain BM1880 Pinctrl driver"
+	depends on OF && (ARCH_BITMAIN || COMPILE_TEST)
+	default ARCH_BITMAIN
+	select PINMUX
+	help
+	  Pinctrl driver for Bitmain BM1880 SoC.
+
 config PINCTRL_DA850_PUPD
 	tristate "TI DA850/OMAP-L138/AM18XX pullup/pulldown groups"
 	depends on OF && (ARCH_DAVINCI_DA850 || COMPILE_TEST)

drivers/pinctrl/Makefile

@@ -14,6 +14,7 @@ obj-$(CONFIG_PINCTRL_AXP209)	+= pinctrl-axp209.o
 obj-$(CONFIG_PINCTRL_AT91)	+= pinctrl-at91.o
 obj-$(CONFIG_PINCTRL_AT91PIO4)	+= pinctrl-at91-pio4.o
 obj-$(CONFIG_PINCTRL_AMD)	+= pinctrl-amd.o
+obj-$(CONFIG_PINCTRL_BM1880)	+= pinctrl-bm1880.o
 obj-$(CONFIG_PINCTRL_DA850_PUPD) += pinctrl-da850-pupd.o
 obj-$(CONFIG_PINCTRL_DIGICOLOR)	+= pinctrl-digicolor.o
 obj-$(CONFIG_PINCTRL_FALCON)	+= pinctrl-falcon.o

drivers/pinctrl/cirrus/Kconfig

+config PINCTRL_LOCHNAGAR
+	tristate "Cirrus Logic Lochnagar pinctrl driver"
+	depends on MFD_LOCHNAGAR
+	select PINMUX
+	select PINCONF
+	select GENERIC_PINCONF
+	help
+	  This driver supports configuring the GPIO and other pin configuration
+	  of the Cirrus Logic Lochnagar audio development board.
+
 # This is all selected by the Madera MFD driver Kconfig options
 config PINCTRL_MADERA
 	tristate

drivers/pinctrl/cirrus/Makefile

 # Cirrus Logic pinctrl drivers
+obj-$(CONFIG_PINCTRL_LOCHNAGAR)	+= pinctrl-lochnagar.o
+
 pinctrl-madera-objs		:= pinctrl-madera-core.o
 ifeq ($(CONFIG_PINCTRL_CS47L35),y)
 pinctrl-madera-objs		+= pinctrl-cs47l35.o

drivers/pinctrl/freescale/pinctrl-imx.c

@@ -449,7 +449,7 @@ static void imx_pinconf_dbg_show(struct pinctrl_dev *pctldev,
 		}
 	} else {
 		pin_reg = &ipctl->pin_regs[pin_id];
-		if (!pin_reg || pin_reg->conf_reg == -1) {
+		if (pin_reg->conf_reg == -1) {
 			seq_puts(s, "N/A");
 			return;
 		}
@@ -785,7 +785,6 @@ int imx_pinctrl_probe(struct platform_device *pdev,
 	struct pinctrl_desc *imx_pinctrl_desc;
 	struct device_node *np;
 	struct imx_pinctrl *ipctl;
-	struct resource *res;
 	struct regmap *gpr;
 	int ret, i;
 
@@ -817,8 +816,7 @@ int imx_pinctrl_probe(struct platform_device *pdev,
 			ipctl->pin_regs[i].conf_reg = -1;
 		}
 
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-		ipctl->base = devm_ioremap_resource(&pdev->dev, res);
+		ipctl->base = devm_platform_ioremap_resource(pdev, 0);
 		if (IS_ERR(ipctl->base))
 			return PTR_ERR(ipctl->base);
 
@@ -887,3 +885,22 @@ int imx_pinctrl_probe(struct platform_device *pdev,
 
 	return ret;
 }
+
+static int __maybe_unused imx_pinctrl_suspend(struct device *dev)
+{
+	struct imx_pinctrl *ipctl = dev_get_drvdata(dev);
+
+	return pinctrl_force_sleep(ipctl->pctl);
+}
+
+static int __maybe_unused imx_pinctrl_resume(struct device *dev)
+{
+	struct imx_pinctrl *ipctl = dev_get_drvdata(dev);
+
+	return pinctrl_force_default(ipctl->pctl);
+}
+
+const struct dev_pm_ops imx_pinctrl_pm_ops = {
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(imx_pinctrl_suspend,
+					imx_pinctrl_resume)
+};

drivers/pinctrl/freescale/pinctrl-imx.h

@@ -17,6 +17,7 @@
 struct platform_device;
 
 extern struct pinmux_ops imx_pmx_ops;
+extern const struct dev_pm_ops imx_pinctrl_pm_ops;
 
 /**
  * struct imx_pin_mmio - MMIO pin configurations

drivers/pinctrl/freescale/pinctrl-imx8mq.c

@@ -339,6 +339,7 @@ static struct platform_driver imx8mq_pinctrl_driver = {
 	.driver = {
 		.name = "imx8mq-pinctrl",
 		.of_match_table = of_match_ptr(imx8mq_pinctrl_of_match),
+		.pm = &imx_pinctrl_pm_ops,
 		.suppress_bind_attrs = true,
 	},
 	.probe = imx8mq_pinctrl_probe,

drivers/pinctrl/freescale/pinctrl-scu.c

@@ -35,7 +35,7 @@ struct imx_sc_msg_resp_pad_get {
 	u32 val;
 } __packed;
 
-struct imx_sc_ipc *pinctrl_ipc_handle;
+static struct imx_sc_ipc *pinctrl_ipc_handle;
 
 int imx_pinctrl_sc_ipc_init(struct platform_device *pdev)
 {

drivers/pinctrl/intel/pinctrl-baytrail.c

@@ -1710,6 +1710,8 @@ static int byt_gpio_probe(struct byt_gpio *vg)
 #ifdef CONFIG_PM_SLEEP
 	vg->saved_context = devm_kcalloc(&vg->pdev->dev, gc->ngpio,
 				       sizeof(*vg->saved_context), GFP_KERNEL);
+	if (!vg->saved_context)
+		return -ENOMEM;
 #endif
 	ret = devm_gpiochip_add_data(&vg->pdev->dev, gc, vg);
 	if (ret) {

drivers/pinctrl/intel/pinctrl-cedarfork.c

@@ -91,13 +91,13 @@ static const struct pinctrl_pin_desc cdf_pins[] = {
 	PINCTRL_PIN(43, "MEMTRIP_N"),
 	PINCTRL_PIN(44, "UART0_RXD"),
 	PINCTRL_PIN(45, "UART0_TXD"),
-	PINCTRL_PIN(46, "UART1_RXD"),
-	PINCTRL_PIN(47, "UART1_TXD"),
+	PINCTRL_PIN(46, "GBE_UART_RXD"),
+	PINCTRL_PIN(47, "GBE_UART_TXD"),
 	/* WEST01 */
 	PINCTRL_PIN(48, "GBE_GPIO13"),
 	PINCTRL_PIN(49, "AUX_PWR"),
-	PINCTRL_PIN(50, "CPU_GP_2"),
-	PINCTRL_PIN(51, "CPU_GP_3"),
+	PINCTRL_PIN(50, "UART0_RTS"),
+	PINCTRL_PIN(51, "UART0_CTS"),
 	PINCTRL_PIN(52, "FAN_PWM_0"),
 	PINCTRL_PIN(53, "FAN_PWM_1"),
 	PINCTRL_PIN(54, "FAN_PWM_2"),
@@ -201,8 +201,8 @@ static const struct pinctrl_pin_desc cdf_pins[] = {
 	/* WESTF */
 	PINCTRL_PIN(145, "NAC_RMII_CLK"),
 	PINCTRL_PIN(146, "NAC_RGMII_CLK"),
-	PINCTRL_PIN(147, "NAC_SPARE0"),
-	PINCTRL_PIN(148, "NAC_SPARE1"),
+	PINCTRL_PIN(147, "NAC_GBE_SMB_CLK_TX_N2S"),
+	PINCTRL_PIN(148, "NAC_GBE_SMB_DATA_TX_N2S"),
 	PINCTRL_PIN(149, "NAC_SPARE2"),
 	PINCTRL_PIN(150, "NAC_INIT_SX_WAKE_N"),
 	PINCTRL_PIN(151, "NAC_GBE_GPIO0_S2N"),
@@ -219,8 +219,8 @@ static const struct pinctrl_pin_desc cdf_pins[] = {
 	PINCTRL_PIN(162, "NAC_NCSI_TXD1"),
 	PINCTRL_PIN(163, "NAC_NCSI_ARB_OUT"),
 	PINCTRL_PIN(164, "NAC_NCSI_OE_N"),
-	PINCTRL_PIN(165, "NAC_GBE_SMB_CLK"),
-	PINCTRL_PIN(166, "NAC_GBE_SMB_DATA"),
+	PINCTRL_PIN(165, "NAC_GBE_SMB_CLK_RX_S2N"),
+	PINCTRL_PIN(166, "NAC_GBE_SMB_DATA_RX_S2N"),
 	PINCTRL_PIN(167, "NAC_GBE_SMB_ALRT_N"),
 	/* EAST2 */
 	PINCTRL_PIN(168, "USB_OC0_N"),
@@ -232,7 +232,7 @@ static const struct pinctrl_pin_desc cdf_pins[] = {
 	PINCTRL_PIN(174, "GBE_GPIO5"),
 	PINCTRL_PIN(175, "GBE_GPIO6"),
 	PINCTRL_PIN(176, "GBE_GPIO7"),
-	PINCTRL_PIN(177, "GBE_GPIO8"),
+	PINCTRL_PIN(177, "SPI_TPM_CS_N"),
 	PINCTRL_PIN(178, "GBE_GPIO9"),
 	PINCTRL_PIN(179, "GBE_GPIO10"),
 	PINCTRL_PIN(180, "GBE_GPIO11"),

drivers/pinctrl/intel/pinctrl-intel.c

@@ -81,6 +81,7 @@ struct intel_pad_context {
 
 struct intel_community_context {
 	u32 *intmask;
+	u32 *hostown;
 };
 
 struct intel_pinctrl_context {
@@ -1284,7 +1285,7 @@ static int intel_pinctrl_pm_init(struct intel_pinctrl *pctrl)
 
 	for (i = 0; i < pctrl->ncommunities; i++) {
 		struct intel_community *community = &pctrl->communities[i];
-		u32 *intmask;
+		u32 *intmask, *hostown;
 
 		intmask = devm_kcalloc(pctrl->dev, community->ngpps,
 				       sizeof(*intmask), GFP_KERNEL);
@@ -1292,6 +1293,13 @@ static int intel_pinctrl_pm_init(struct intel_pinctrl *pctrl)
 			return -ENOMEM;
 
 		communities[i].intmask = intmask;
+
+		hostown = devm_kcalloc(pctrl->dev, community->ngpps,
+				       sizeof(*hostown), GFP_KERNEL);
+		if (!hostown)
+			return -ENOMEM;
+
+		communities[i].hostown = hostown;
 	}
 
 	pctrl->context.pads = pads;
@@ -1466,7 +1474,7 @@ static bool intel_pinctrl_should_save(struct intel_pinctrl *pctrl, unsigned int
 	return false;
 }
 
-int intel_pinctrl_suspend(struct device *dev)
+int intel_pinctrl_suspend_noirq(struct device *dev)
 {
 	struct intel_pinctrl *pctrl = dev_get_drvdata(dev);
 	struct intel_community_context *communities;
@@ -1501,11 +1509,15 @@ int intel_pinctrl_suspend(struct device *dev)
 		base = community->regs + community->ie_offset;
 		for (gpp = 0; gpp < community->ngpps; gpp++)
 			communities[i].intmask[gpp] = readl(base + gpp * 4);
+
+		base = community->regs + community->hostown_offset;
+		for (gpp = 0; gpp < community->ngpps; gpp++)
+			communities[i].hostown[gpp] = readl(base + gpp * 4);
 	}
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(intel_pinctrl_suspend);
+EXPORT_SYMBOL_GPL(intel_pinctrl_suspend_noirq);
 
 static void intel_gpio_irq_init(struct intel_pinctrl *pctrl)
 {
@@ -1527,7 +1539,32 @@ static void intel_gpio_irq_init(struct intel_pinctrl *pctrl)
 	}
 }
 
-int intel_pinctrl_resume(struct device *dev)
+static u32
+intel_gpio_is_requested(struct gpio_chip *chip, int base, unsigned int size)
+{
+	u32 requested = 0;
+	unsigned int i;
+
+	for (i = 0; i < size; i++)
+		if (gpiochip_is_requested(chip, base + i))
+			requested |= BIT(i);
+
+	return requested;
+}
+
+static u32
+intel_gpio_update_pad_mode(void __iomem *hostown, u32 mask, u32 value)
+{
+	u32 curr, updated;
+
+	curr = readl(hostown);
+	updated = (curr & ~mask) | (value & mask);
+	writel(updated, hostown);
+
+	return curr;
+}
+
+int intel_pinctrl_resume_noirq(struct device *dev)
 {
 	struct intel_pinctrl *pctrl = dev_get_drvdata(dev);
 	const struct intel_community_context *communities;
@@ -1585,11 +1622,30 @@ int intel_pinctrl_resume(struct device *dev)
 			dev_dbg(dev, "restored mask %d/%u %#08x\n", i, gpp,
 				readl(base + gpp * 4));
 		}
+
+		base = community->regs + community->hostown_offset;
+		for (gpp = 0; gpp < community->ngpps; gpp++) {
+			const struct intel_padgroup *padgrp = &community->gpps[gpp];
+			u32 requested = 0, value = 0;
+			u32 saved = communities[i].hostown[gpp];
+
+			if (padgrp->gpio_base < 0)
+				continue;
+
+			requested = intel_gpio_is_requested(&pctrl->chip,
+					padgrp->gpio_base, padgrp->size);
+			value = intel_gpio_update_pad_mode(base + gpp * 4,
+					requested, saved);
+			if ((value ^ saved) & requested) {
+				dev_warn(dev, "restore hostown %d/%u %#8x->%#8x\n",
+					i, gpp, value, saved);
+			}
+		}
 	}
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(intel_pinctrl_resume);
+EXPORT_SYMBOL_GPL(intel_pinctrl_resume_noirq);
 #endif
 
 MODULE_AUTHOR("Mathias Nyman <mathias.nyman@linux.intel.com>");

drivers/pinctrl/intel/pinctrl-intel.h

@@ -177,13 +177,14 @@ int intel_pinctrl_probe_by_hid(struct platform_device *pdev);
 int intel_pinctrl_probe_by_uid(struct platform_device *pdev);
 
 #ifdef CONFIG_PM_SLEEP
-int intel_pinctrl_suspend(struct device *dev);
-int intel_pinctrl_resume(struct device *dev);
+int intel_pinctrl_suspend_noirq(struct device *dev);
+int intel_pinctrl_resume_noirq(struct device *dev);
 #endif
 
 #define INTEL_PINCTRL_PM_OPS(_name)					\
 const struct dev_pm_ops _name = {					\
-	SET_LATE_SYSTEM_SLEEP_PM_OPS(intel_pinctrl_suspend, intel_pinctrl_resume) \
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(intel_pinctrl_suspend_noirq,	\
+				      intel_pinctrl_resume_noirq)	\
 }
 
 #endif /* PINCTRL_INTEL_H */

drivers/pinctrl/mediatek/Kconfig

@@ -113,6 +113,13 @@ config PINCTRL_MT8183
 	default ARM64 && ARCH_MEDIATEK
 	select PINCTRL_MTK_PARIS
 
+config PINCTRL_MT8516
+	bool "Mediatek MT8516 pin control"
+	depends on OF
+	depends on ARM64 || COMPILE_TEST
+	default ARM64 && ARCH_MEDIATEK
+	select PINCTRL_MTK
+
 # For PMIC
 config PINCTRL_MT6397
 	bool "Mediatek MT6397 pin control"

drivers/pinctrl/mediatek/Makefile

@@ -17,4 +17,5 @@ obj-$(CONFIG_PINCTRL_MT7623)	+= pinctrl-mt7623.o
 obj-$(CONFIG_PINCTRL_MT7629)	+= pinctrl-mt7629.o
 obj-$(CONFIG_PINCTRL_MT8173)	+= pinctrl-mt8173.o
 obj-$(CONFIG_PINCTRL_MT8183)	+= pinctrl-mt8183.o
+obj-$(CONFIG_PINCTRL_MT8516)	+= pinctrl-mt8516.o
 obj-$(CONFIG_PINCTRL_MT6397)	+= pinctrl-mt6397.o

drivers/pinctrl/mediatek/pinctrl-mt8183.c

@@ -472,6 +472,51 @@ static const struct mtk_pin_field_calc mt8183_pin_r1_range[] = {
 	PIN_FIELD_BASE(133, 133, 8, 0x0D0, 0x10, 13, 1),
 };
 
+static const struct mtk_pin_field_calc mt8183_pin_e1e0en_range[] = {
+	PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 20, 1),
+	PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 15, 1),
+	PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 12, 1),
+	PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 7, 1),
+	PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 12, 1),
+	PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 9, 1),
+	PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 19, 1),
+	PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 22, 1),
+	PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 24, 1),
+	PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 14, 1),
+	PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 27, 1),
+	PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 17, 1),
+};
+
+static const struct mtk_pin_field_calc mt8183_pin_e0_range[] = {
+	PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 21, 1),
+	PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 16, 1),
+	PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 13, 1),
+	PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 8, 1),
+	PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 13, 1),
+	PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 10, 1),
+	PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 20, 1),
+	PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 23, 1),
+	PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 25, 1),
+	PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 15, 1),
+	PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 28, 1),
+	PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 18, 1),
+};
+
+static const struct mtk_pin_field_calc mt8183_pin_e1_range[] = {
+	PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 22, 1),
+	PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 17, 1),
+	PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 14, 1),
+	PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 9, 1),
+	PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 14, 1),
+	PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 11, 1),
+	PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 21, 1),
+	PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 24, 1),
+	PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 26, 1),
+	PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 16, 1),
+	PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 29, 1),
+	PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 19, 1),
+};
+
 static const struct mtk_pin_reg_calc mt8183_reg_cals[PINCTRL_PIN_REG_MAX] = {
 	[PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt8183_pin_mode_range),
 	[PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt8183_pin_dir_range),
@@ -485,6 +530,9 @@ static const struct mtk_pin_reg_calc mt8183_reg_cals[PINCTRL_PIN_REG_MAX] = {
 	[PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt8183_pin_pupd_range),
 	[PINCTRL_PIN_REG_R0] = MTK_RANGE(mt8183_pin_r0_range),
 	[PINCTRL_PIN_REG_R1] = MTK_RANGE(mt8183_pin_r1_range),
+	[PINCTRL_PIN_REG_DRV_EN] = MTK_RANGE(mt8183_pin_e1e0en_range),
+	[PINCTRL_PIN_REG_DRV_E0] = MTK_RANGE(mt8183_pin_e0_range),
+	[PINCTRL_PIN_REG_DRV_E1] = MTK_RANGE(mt8183_pin_e1_range),
 };
 
 static const char * const mt8183_pinctrl_register_base_names[] = {
@@ -517,6 +565,8 @@ static const struct mtk_pin_soc mt8183_data = {
 	.drive_get = mtk_pinconf_drive_get_rev1,
 	.adv_pull_get = mtk_pinconf_adv_pull_get,
 	.adv_pull_set = mtk_pinconf_adv_pull_set,
+	.adv_drive_get = mtk_pinconf_adv_drive_get,
+	.adv_drive_set = mtk_pinconf_adv_drive_set,
 };
 
 static const struct of_device_id mt8183_pinctrl_of_match[] = {

drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c

@@ -674,3 +674,52 @@ int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
 
 	return 0;
 }
+
+int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
+			      const struct mtk_pin_desc *desc, u32 arg)
+{
+	int err;
+	int en = arg & 1;
+	int e0 = !!(arg & 2);
+	int e1 = !!(arg & 4);
+
+	err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_EN, en);
+	if (err)
+		return err;
+
+	if (!en)
+		return err;
+
+	err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E0, e0);
+	if (err)
+		return err;
+
+	err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E1, e1);
+	if (err)
+		return err;
+
+	return err;
+}
+
+int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
+			      const struct mtk_pin_desc *desc, u32 *val)
+{
+	u32 en, e0, e1;
+	int err;
+
+	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_EN, &en);
+	if (err)
+		return err;
+
+	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E0, &e0);
+	if (err)
+		return err;
+
+	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E1, &e1);
+	if (err)
+		return err;
+
+	*val = (en | e0 << 1 | e1 << 2) & 0x7;
+
+	return 0;
+}

drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h

@@ -63,6 +63,9 @@ enum {
 	PINCTRL_PIN_REG_IES,
 	PINCTRL_PIN_REG_PULLEN,
 	PINCTRL_PIN_REG_PULLSEL,
+	PINCTRL_PIN_REG_DRV_EN,
+	PINCTRL_PIN_REG_DRV_E0,
+	PINCTRL_PIN_REG_DRV_E1,
 	PINCTRL_PIN_REG_MAX,
 };
 
@@ -224,6 +227,10 @@ struct mtk_pin_soc {
 	int (*adv_pull_get)(struct mtk_pinctrl *hw,
 			    const struct mtk_pin_desc *desc, bool pullup,
 			    u32 *val);
+	int (*adv_drive_set)(struct mtk_pinctrl *hw,
+			     const struct mtk_pin_desc *desc, u32 arg);
+	int (*adv_drive_get)(struct mtk_pinctrl *hw,
+			     const struct mtk_pin_desc *desc, u32 *val);
 
 	/* Specific driver data */
 	void				*driver_data;
@@ -287,5 +294,9 @@ int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
 int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
 			     const struct mtk_pin_desc *desc, bool pullup,
 			     u32 *val);
+int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
+			      const struct mtk_pin_desc *desc, u32 arg);
+int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
+			      const struct mtk_pin_desc *desc, u32 *val);
 
 #endif /* __PINCTRL_MTK_COMMON_V2_H */

drivers/pinctrl/mediatek/pinctrl-paris.c

@@ -20,12 +20,14 @@
 #define MTK_PIN_CONFIG_RDSEL	(PIN_CONFIG_END + 2)
 #define MTK_PIN_CONFIG_PU_ADV	(PIN_CONFIG_END + 3)
 #define MTK_PIN_CONFIG_PD_ADV	(PIN_CONFIG_END + 4)
+#define MTK_PIN_CONFIG_DRV_ADV	(PIN_CONFIG_END + 5)
 
 static const struct pinconf_generic_params mtk_custom_bindings[] = {
 	{"mediatek,tdsel",	MTK_PIN_CONFIG_TDSEL,		0},
 	{"mediatek,rdsel",	MTK_PIN_CONFIG_RDSEL,		0},
 	{"mediatek,pull-up-adv", MTK_PIN_CONFIG_PU_ADV,		1},
 	{"mediatek,pull-down-adv", MTK_PIN_CONFIG_PD_ADV,	1},
+	{"mediatek,drive-strength-adv", MTK_PIN_CONFIG_DRV_ADV,	2},
 };
 
 #ifdef CONFIG_DEBUG_FS
@@ -34,6 +36,7 @@ static const struct pin_config_item mtk_conf_items[] = {
 	PCONFDUMP(MTK_PIN_CONFIG_RDSEL, "rdsel", NULL, true),
 	PCONFDUMP(MTK_PIN_CONFIG_PU_ADV, "pu-adv", NULL, true),
 	PCONFDUMP(MTK_PIN_CONFIG_PD_ADV, "pd-adv", NULL, true),
+	PCONFDUMP(MTK_PIN_CONFIG_DRV_ADV, "drive-strength-adv", NULL, true),
 };
 #endif
 
@@ -176,6 +179,15 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
 			return -ENOTSUPP;
 		}
 		break;
+	case MTK_PIN_CONFIG_DRV_ADV:
+		if (hw->soc->adv_drive_get) {
+			err = hw->soc->adv_drive_get(hw, desc, &ret);
+			if (err)
+				return err;
+		} else {
+			return -ENOTSUPP;
+		}
+		break;
 	default:
 		return -ENOTSUPP;
 	}
@@ -311,6 +323,15 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 			return -ENOTSUPP;
 		}
 		break;
+	case MTK_PIN_CONFIG_DRV_ADV:
+		if (hw->soc->adv_drive_set) {
+			err = hw->soc->adv_drive_set(hw, desc, arg);
+			if (err)
+				return err;
+		} else {
+			return -ENOTSUPP;
+		}
+		break;
 	default:
 		err = -ENOTSUPP;
 	}

drivers/pinctrl/pinctrl-amd.c

@@ -930,8 +930,8 @@ static int amd_gpio_probe(struct platform_device *pdev)
 		goto out2;
 	}
 
-	ret = devm_request_irq(&pdev->dev, irq_base, amd_gpio_irq_handler, 0,
-			       KBUILD_MODNAME, gpio_dev);
+	ret = devm_request_irq(&pdev->dev, irq_base, amd_gpio_irq_handler,
+			       IRQF_SHARED, KBUILD_MODNAME, gpio_dev);
 	if (ret)
 		goto out2;
 

drivers/pinctrl/pinctrl-artpec6.c

@@ -688,7 +688,8 @@ static void artpec6_pmx_select_func(struct pinctrl_dev *pctldev,
 	}
 }
 
-int artpec6_pmx_enable(struct pinctrl_dev *pctldev, unsigned int function,
+static int artpec6_pmx_set(struct pinctrl_dev *pctldev,
+			   unsigned int function,
 			   unsigned int group)
 {
 	struct artpec6_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
@@ -702,18 +703,6 @@ int artpec6_pmx_enable(struct pinctrl_dev *pctldev, unsigned int function,
 	return 0;
 }
 
-void artpec6_pmx_disable(struct pinctrl_dev *pctldev, unsigned int function,
-			 unsigned int group)
-{
-	struct artpec6_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
-
-	dev_dbg(pmx->dev, "disabling %s function for pin group %s\n",
-		artpec6_pmx_get_fname(pctldev, function),
-		artpec6_get_group_name(pctldev, group));
-
-	artpec6_pmx_select_func(pctldev, function, group, false);
-}
-
 static int artpec6_pmx_request_gpio(struct pinctrl_dev *pctldev,
 				    struct pinctrl_gpio_range *range,
 				    unsigned int pin)
@@ -737,7 +726,7 @@ static const struct pinmux_ops artpec6_pmx_ops = {
 	.get_functions_count	= artpec6_pmx_get_functions_count,
 	.get_function_name	= artpec6_pmx_get_fname,
 	.get_function_groups	= artpec6_pmx_get_fgroups,
-	.set_mux		= artpec6_pmx_enable,
+	.set_mux		= artpec6_pmx_set,
 	.gpio_request_enable = artpec6_pmx_request_gpio,
 };
 

drivers/pinctrl/pinctrl-axp209.c

@@ -366,6 +366,8 @@ static int axp20x_build_funcs_groups(struct platform_device *pdev)
 		pctl->funcs[i].groups = devm_kcalloc(&pdev->dev,
 						     npins, sizeof(char *),
 						     GFP_KERNEL);
+		if (!pctl->funcs[i].groups)
+			return -ENOMEM;
 		for (pin = 0; pin < npins; pin++)
 			pctl->funcs[i].groups[pin] = pctl->desc->pins[pin].name;
 	}

drivers/pinctrl/pinctrl-mcp23s08.c

@@ -266,7 +266,6 @@ static int mcp_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
 		status = (data & BIT(pin)) ? 1 : 0;
 		break;
 	default:
-		dev_err(mcp->dev, "Invalid config param %04x\n", param);
 		return -ENOTSUPP;
 	}
 
@@ -293,7 +292,7 @@ static int mcp_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 			ret = mcp_set_bit(mcp, MCP_GPPU, pin, arg);
 			break;
 		default:
-			dev_err(mcp->dev, "Invalid config param %04x\n", param);
+			dev_dbg(mcp->dev, "Invalid config param %04x\n", param);
 			return -ENOTSUPP;
 		}
 	}

drivers/pinctrl/pinctrl-pistachio.c

@@ -1367,6 +1367,7 @@ static int pistachio_gpio_register(struct pistachio_pinctrl *pctl)
 		if (!of_find_property(child, "gpio-controller", NULL)) {
 			dev_err(pctl->dev,
 				"No gpio-controller property for bank %u\n", i);
+			of_node_put(child);
 			ret = -ENODEV;
 			goto err;
 		}
@@ -1374,6 +1375,7 @@ static int pistachio_gpio_register(struct pistachio_pinctrl *pctl)
 		irq = irq_of_parse_and_map(child, 0);
 		if (irq < 0) {
 			dev_err(pctl->dev, "No IRQ for bank %u: %d\n", i, irq);
+			of_node_put(child);
 			ret = irq;
 			goto err;
 		}

drivers/pinctrl/pinctrl-rza1.c

@@ -620,14 +620,7 @@ static void rza1_pin_reset(struct rza1_port *port, unsigned int pin)
 static inline int rza1_pin_get_direction(struct rza1_port *port,
 					 unsigned int pin)
 {
-	unsigned long irqflags;
-	int input;
-
-	spin_lock_irqsave(&port->lock, irqflags);
-	input = rza1_get_bit(port, RZA1_PM_REG, pin);
-	spin_unlock_irqrestore(&port->lock, irqflags);
-
-	return !!input;
+	return !!rza1_get_bit(port, RZA1_PM_REG, pin);
 }
 
 /**
@@ -671,14 +664,7 @@ static inline void rza1_pin_set(struct rza1_port *port, unsigned int pin,
 
 static inline int rza1_pin_get(struct rza1_port *port, unsigned int pin)
 {
-	unsigned long irqflags;
-	int val;
-
-	spin_lock_irqsave(&port->lock, irqflags);
-	val = rza1_get_bit(port, RZA1_PPR_REG, pin);
-	spin_unlock_irqrestore(&port->lock, irqflags);
-
-	return val;
+	return rza1_get_bit(port, RZA1_PPR_REG, pin);
 }
 
 /**

drivers/pinctrl/pinctrl-st.c

@@ -1170,7 +1170,7 @@ static int st_pctl_dt_parse_groups(struct device_node *np,
 	struct property *pp;
 	struct st_pinconf *conf;
 	struct device_node *pins;
-	int i = 0, npins = 0, nr_props;
+	int i = 0, npins = 0, nr_props, ret = 0;
 
 	pins = of_get_child_by_name(np, "st,pins");
 	if (!pins)
@@ -1185,7 +1185,8 @@ static int st_pctl_dt_parse_groups(struct device_node *np,
 			npins++;
 		} else {
 			pr_warn("Invalid st,pins in %pOFn node\n", np);
-			return -EINVAL;
+			ret = -EINVAL;
+			goto out_put_node;
 		}
 	}
 
@@ -1195,8 +1196,10 @@ static int st_pctl_dt_parse_groups(struct device_node *np,
 	grp->pin_conf = devm_kcalloc(info->dev,
 					npins, sizeof(*conf), GFP_KERNEL);
 
-	if (!grp->pins || !grp->pin_conf)
-		return -ENOMEM;
+	if (!grp->pins || !grp->pin_conf) {
+		ret = -ENOMEM;
+		goto out_put_node;
+	}
 
 	/* <bank offset mux direction rt_type rt_delay rt_clk> */
 	for_each_property_of_node(pins, pp) {
@@ -1229,9 +1232,11 @@ static int st_pctl_dt_parse_groups(struct device_node *np,
 		}
 		i++;
 	}
+
+out_put_node:
 	of_node_put(pins);
 
-	return 0;
+	return ret;
 }
 
 static int st_pctl_parse_functions(struct device_node *np,

drivers/pinctrl/samsung/pinctrl-exynos-arm.c

@@ -71,6 +71,7 @@ s5pv210_retention_init(struct samsung_pinctrl_drv_data *drvdata,
 	}
 
 	clk_base = of_iomap(np, 0);
+	of_node_put(np);
 	if (!clk_base) {
 		pr_err("%s: failed to map clock registers\n", __func__);
 		return ERR_PTR(-EINVAL);

drivers/pinctrl/sh-pfc/Makefile

@@ -38,3 +38,18 @@ obj-$(CONFIG_PINCTRL_PFC_SH7757)	+= pfc-sh7757.o
 obj-$(CONFIG_PINCTRL_PFC_SH7785)	+= pfc-sh7785.o
 obj-$(CONFIG_PINCTRL_PFC_SH7786)	+= pfc-sh7786.o
 obj-$(CONFIG_PINCTRL_PFC_SHX3)		+= pfc-shx3.o
+
+ifeq ($(CONFIG_COMPILE_TEST),y)
+CFLAGS_pfc-sh7203.o	+= -I$(srctree)/arch/sh/include/cpu-sh2a
+CFLAGS_pfc-sh7264.o	+= -I$(srctree)/arch/sh/include/cpu-sh2a
+CFLAGS_pfc-sh7269.o	+= -I$(srctree)/arch/sh/include/cpu-sh2a
+CFLAGS_pfc-sh7720.o	+= -I$(srctree)/arch/sh/include/cpu-sh3
+CFLAGS_pfc-sh7722.o	+= -I$(srctree)/arch/sh/include/cpu-sh4
+CFLAGS_pfc-sh7723.o	+= -I$(srctree)/arch/sh/include/cpu-sh4
+CFLAGS_pfc-sh7724.o	+= -I$(srctree)/arch/sh/include/cpu-sh4
+CFLAGS_pfc-sh7734.o	+= -I$(srctree)/arch/sh/include/cpu-sh4
+CFLAGS_pfc-sh7757.o	+= -I$(srctree)/arch/sh/include/cpu-sh4
+CFLAGS_pfc-sh7785.o	+= -I$(srctree)/arch/sh/include/cpu-sh4
+CFLAGS_pfc-sh7786.o	+= -I$(srctree)/arch/sh/include/cpu-sh4
+CFLAGS_pfc-shx3.o	+= -I$(srctree)/arch/sh/include/cpu-sh4
+endif

drivers/pinctrl/sh-pfc/gpio.c

@@ -252,7 +252,7 @@ static int gpio_pin_setup(struct sh_pfc_chip *chip)
  * Function GPIOs
  */
 
-#ifdef CONFIG_SUPERH
+#ifdef CONFIG_PINCTRL_SH_FUNC_GPIO
 static int gpio_function_request(struct gpio_chip *gc, unsigned offset)
 {
 	static bool __print_once;
@@ -292,7 +292,7 @@ static int gpio_function_setup(struct sh_pfc_chip *chip)
 
 	return 0;
 }
-#endif
+#endif /* CONFIG_PINCTRL_SH_FUNC_GPIO */
 
 /* -----------------------------------------------------------------------------
  * Register/unregister
@@ -369,7 +369,7 @@ int sh_pfc_register_gpiochip(struct sh_pfc *pfc)
 	if (IS_ENABLED(CONFIG_OF) && pfc->dev->of_node)
 		return 0;
 
-#ifdef CONFIG_SUPERH
+#ifdef CONFIG_PINCTRL_SH_FUNC_GPIO
 	/*
 	 * Register the GPIO to pin mappings. As pins with GPIO ports
 	 * must come first in the ranges, skip the pins without GPIO
@@ -397,7 +397,7 @@ int sh_pfc_register_gpiochip(struct sh_pfc *pfc)
 	chip = sh_pfc_add_gpiochip(pfc, gpio_function_setup, NULL);
 	if (IS_ERR(chip))
 		return PTR_ERR(chip);
-#endif /* CONFIG_SUPERH */
+#endif /* CONFIG_PINCTRL_SH_FUNC_GPIO */
 
 	return 0;
 }

drivers/pinctrl/sh-pfc/pfc-shx3.c

@@ -431,7 +431,7 @@ static const struct pinmux_func pinmux_func_gpios[] = {
 };
 
 static const struct pinmux_cfg_reg pinmux_config_regs[] = {
-	{ PINMUX_CFG_REG("PABCR", 0xffc70000, 32, 2) {
+	{ PINMUX_CFG_REG("PABCR", 0xffc70000, 32, 2, GROUP(
 		PA7_FN, PA7_OUT, PA7_IN, 0,
 		PA6_FN, PA6_OUT, PA6_IN, 0,
 		PA5_FN, PA5_OUT, PA5_IN, 0,
@@ -447,9 +447,9 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 		PB3_FN, PB3_OUT, PB3_IN, 0,
 		PB2_FN, PB2_OUT, PB2_IN, 0,
 		PB1_FN, PB1_OUT, PB1_IN, 0,
-		PB0_FN, PB0_OUT, PB0_IN, 0, },
+		PB0_FN, PB0_OUT, PB0_IN, 0, ))
 	},
-	{ PINMUX_CFG_REG("PCDCR", 0xffc70004, 32, 2) {
+	{ PINMUX_CFG_REG("PCDCR", 0xffc70004, 32, 2, GROUP(
 		PC7_FN, PC7_OUT, PC7_IN, 0,
 		PC6_FN, PC6_OUT, PC6_IN, 0,
 		PC5_FN, PC5_OUT, PC5_IN, 0,
@@ -465,9 +465,9 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 		PD3_FN, PD3_OUT, PD3_IN, 0,
 		PD2_FN, PD2_OUT, PD2_IN, 0,
 		PD1_FN, PD1_OUT, PD1_IN, 0,
-		PD0_FN, PD0_OUT, PD0_IN, 0, },
+		PD0_FN, PD0_OUT, PD0_IN, 0, ))
 	},
-	{ PINMUX_CFG_REG("PEFCR", 0xffc70008, 32, 2) {
+	{ PINMUX_CFG_REG("PEFCR", 0xffc70008, 32, 2, GROUP(
 		PE7_FN, PE7_OUT, PE7_IN, 0,
 		PE6_FN, PE6_OUT, PE6_IN, 0,
 		PE5_FN, PE5_OUT, PE5_IN, 0,
@@ -483,9 +483,9 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 		PF3_FN, PF3_OUT, PF3_IN, 0,
 		PF2_FN, PF2_OUT, PF2_IN, 0,
 		PF1_FN, PF1_OUT, PF1_IN, 0,
-		PF0_FN, PF0_OUT, PF0_IN, 0, },
+		PF0_FN, PF0_OUT, PF0_IN, 0, ))
 	},
-	{ PINMUX_CFG_REG("PGHCR", 0xffc7000c, 32, 2) {
+	{ PINMUX_CFG_REG("PGHCR", 0xffc7000c, 32, 2, GROUP(
 		PG7_FN, PG7_OUT, PG7_IN, 0,
 		PG6_FN, PG6_OUT, PG6_IN, 0,
 		PG5_FN, PG5_OUT, PG5_IN, 0,
@@ -501,43 +501,43 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 		PH3_FN, PH3_OUT, PH3_IN, 0,
 		PH2_FN, PH2_OUT, PH2_IN, 0,
 		PH1_FN, PH1_OUT, PH1_IN, 0,
-		PH0_FN, PH0_OUT, PH0_IN, 0, },
+		PH0_FN, PH0_OUT, PH0_IN, 0, ))
 	},
 	{ },
 };
 
 static const struct pinmux_data_reg pinmux_data_regs[] = {
-	{ PINMUX_DATA_REG("PABDR", 0xffc70010, 32) {
+	{ PINMUX_DATA_REG("PABDR", 0xffc70010, 32, GROUP(
 		0, 0, 0, 0, 0, 0, 0, 0,
 		PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
 		PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
 		0, 0, 0, 0, 0, 0, 0, 0,
 		PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
-		PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA, },
+		PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA, ))
 	},
-	{ PINMUX_DATA_REG("PCDDR", 0xffc70014, 32) {
+	{ PINMUX_DATA_REG("PCDDR", 0xffc70014, 32, GROUP(
 		0, 0, 0, 0, 0, 0, 0, 0,
 		PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
 		PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
 		0, 0, 0, 0, 0, 0, 0, 0,
 		PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
-		PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA, },
+		PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA, ))
 	},
-	{ PINMUX_DATA_REG("PEFDR", 0xffc70018, 32) {
+	{ PINMUX_DATA_REG("PEFDR", 0xffc70018, 32, GROUP(
 		0, 0, 0, 0, 0, 0, 0, 0,
 		PE7_DATA, PE6_DATA, PE5_DATA, PE4_DATA,
 		PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA,
 		0, 0, 0, 0, 0, 0, 0, 0,
 		PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
-		PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA, },
+		PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA, ))
 	},
-	{ PINMUX_DATA_REG("PGHDR", 0xffc7001c, 32) {
+	{ PINMUX_DATA_REG("PGHDR", 0xffc7001c, 32, GROUP(
 		0, 0, 0, 0, 0, 0, 0, 0,
 		PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA,
 		PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA,
 		0, 0, 0, 0, 0, 0, 0, 0,
 		0, 0, PH5_DATA, PH4_DATA,
-		PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA, },
+		PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA, ))
 	},
 	{ },
 };

drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c

@@ -591,6 +591,7 @@ static const struct sunxi_pinctrl_desc h6_pinctrl_data = {
 	.irq_banks = 4,
 	.irq_bank_map = h6_irq_bank_map,
 	.irq_read_needs_mux = true,
+	.io_bias_cfg_variant = BIAS_VOLTAGE_PIO_POW_MODE_SEL,
 };
 
 static int h6_pinctrl_probe(struct platform_device *pdev)