Skip to content

L
linux
Commit fe4d2755 authored by David Kilroy's avatar David Kilroy Committed by Greg Kroah-Hartman
Browse files
Options

staging: wlags49_h2: Reindent hcfdef.h 

Untabified with tab-width set to 4. Reindented with linux style.

Also remove BITN macros.
Signed-off-by: default avatarDavid Kilroy <kilroyd@googlemail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent ada4f4f8
Hide whitespace changes
Inline Side-by-side
Showing with 390 additions and 427 deletions
drivers/staging/wlags49_h2/hcfdef.h
View file @ fe4d2755
// vim:tw=110:ts=4:
#ifndef HCFDEFC_H
#define HCFDEFC_H 1
/*************************************************************************************************
*
* FILE : HCFDEF.H
*
* DATE : $Date: 2004/08/05 11:47:10 $ $Revision: 1.8 $
* Original: 2004/05/28 14:05:35 Revision: 1.59 Tag: hcf7_t20040602_01
* Original: 2004/05/13 15:31:45 Revision: 1.53 Tag: hcf7_t7_20040513_01
* Original: 2004/04/15 09:24:42 Revision: 1.44 Tag: hcf7_t7_20040415_01
* Original: 2004/04/13 14:22:45 Revision: 1.43 Tag: t7_20040413_01
* Original: 2004/04/01 15:32:55 Revision: 1.40 Tag: t7_20040401_01
* Original: 2004/03/10 15:39:28 Revision: 1.36 Tag: t20040310_01
* Original: 2004/03/03 14:10:12 Revision: 1.34 Tag: t20040304_01
* Original: 2004/03/02 09:27:12 Revision: 1.32 Tag: t20040302_03
* Original: 2004/02/24 13:00:29 Revision: 1.29 Tag: t20040224_01
* Original: 2004/02/18 17:13:57 Revision: 1.26 Tag: t20040219_01
*
* AUTHOR : Nico Valster
*
* SPECIFICATION: ...........
*
* DESC : Definitions and Prototypes for HCF only
*
**************************************************************************************************
*
*
* SOFTWARE LICENSE
*
* This software is provided subject to the following terms and conditions,
* which you should read carefully before using the software. Using this
* software indicates your acceptance of these terms and conditions. If you do
* not agree with these terms and conditions, do not use the software.
*
* COPYRIGHT 1994 - 1995 by AT&T. All Rights Reserved
* COPYRIGHT 1996 - 2000 by Lucent Technologies. All Rights Reserved
* COPYRIGHT 2001 - 2004 by Agere Systems Inc. All Rights Reserved
* All rights reserved.
*
* Redistribution and use in source or binary forms, with or without
* modifications, are permitted provided that the following conditions are met:
*
* . Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following Disclaimer as comments in the code as
* well as in the documentation and/or other materials provided with the
* distribution.
*
* . Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following Disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* . Neither the name of Agere Systems Inc. nor the names of the contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* Disclaimer
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
* USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
* RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*
*
*************************************************************************************************/
*
* FILE : HCFDEF.H
*
* DATE : $Date: 2004/08/05 11:47:10 $ $Revision: 1.8 $
* Original: 2004/05/28 14:05:35 Revision: 1.59 Tag: hcf7_t20040602_01
* Original: 2004/05/13 15:31:45 Revision: 1.53 Tag: hcf7_t7_20040513_01
* Original: 2004/04/15 09:24:42 Revision: 1.44 Tag: hcf7_t7_20040415_01
* Original: 2004/04/13 14:22:45 Revision: 1.43 Tag: t7_20040413_01
* Original: 2004/04/01 15:32:55 Revision: 1.40 Tag: t7_20040401_01
* Original: 2004/03/10 15:39:28 Revision: 1.36 Tag: t20040310_01
* Original: 2004/03/03 14:10:12 Revision: 1.34 Tag: t20040304_01
* Original: 2004/03/02 09:27:12 Revision: 1.32 Tag: t20040302_03
* Original: 2004/02/24 13:00:29 Revision: 1.29 Tag: t20040224_01
* Original: 2004/02/18 17:13:57 Revision: 1.26 Tag: t20040219_01
*
* AUTHOR : Nico Valster
*
* SPECIFICATION: ...........
*
* DESC : Definitions and Prototypes for HCF only
*
**************************************************************************************************
*
*
* SOFTWARE LICENSE
*
* This software is provided subject to the following terms and conditions,
* which you should read carefully before using the software. Using this
* software indicates your acceptance of these terms and conditions. If you do
* not agree with these terms and conditions, do not use the software.
*
* COPYRIGHT © 1994 - 1995 by AT&T. All Rights Reserved
* COPYRIGHT © 1996 - 2000 by Lucent Technologies. All Rights Reserved
* COPYRIGHT © 2001 - 2004 by Agere Systems Inc. All Rights Reserved
* All rights reserved.
*
* Redistribution and use in source or binary forms, with or without
* modifications, are permitted provided that the following conditions are met:
*
* . Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following Disclaimer as comments in the code as
* well as in the documentation and/or other materials provided with the
* distribution.
*
* . Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following Disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* . Neither the name of Agere Systems Inc. nor the names of the contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* Disclaimer
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
* USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
* RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*
*
*************************************************************************************************/
/************************************************************************************************/
/********************************* P R E F I X E S ********************************************/
/************************************************************************************************/
//IFB_ Interface Block
//HCMD_ Hermes Command
//HFS_ Hermes (Transmit/Receive) Frame Structure
//HREG_ Hermes Register
//IFB_ Interface Block
//HCMD_ Hermes Command
//HFS_ Hermes (Transmit/Receive) Frame Structure
//HREG_ Hermes Register
/*************************************************************************************************/
#if 0 //
#define BIT0 0x0001
#define BIT1 0x0002
#define BIT2 0x0004
#define BIT3 0x0008
#define BIT4 0x0010
#define BIT5 0x0020
#define BIT6 0x0040
#define BIT7 0x0080
#define BIT8 0x0100
#define BIT9 0x0200
#define BIT10 0x0400
#define BIT11 0x0800
#define BIT12 0x1000
#define BIT13 0x2000
#define BIT14 0x4000
#define BIT15 0x8000
#define BIT16 0x00010000
#define BIT17 0x00020000
#define BIT18 0x00040000
#define BIT19 0x00080000
#define BIT20 0x00100000
#define BIT21 0x00200000
#define BIT22 0x00400000
#define BIT23 0x00800000
#define BIT24 0x01000000
#define BIT25 0x02000000
#define BIT26 0x04000000
#define BIT27 0x08000000
#define BIT28 0x10000000
#define BIT29 0x20000000
#define BIT30 0x40000000
#define BIT31 0x80000000
#endif // 0
/************************************************************************************************/
/********************************* GENERAL EQUATES **********************************************/
/************************************************************************************************/
#define HCF_MAGIC 0x7D37 // "}7" Handle validation
#define HCF_MAGIC 0x7D37 // "}7" Handle validation
#define PLUG_DATA_OFFSET 0x00000800 //needed by some test tool on top of H-II NDIS driver
#define PLUG_DATA_OFFSET 0x00000800 //needed by some test tool on top of H-II NDIS driver
#define INI_TICK_INI 0x00040000L
#define INI_TICK_INI 0x00040000L
#define IO_IN 0 //hcfio_in_string
#define IO_OUT 1 //hcfio_out_string
#define IO_IN 0 //hcfio_in_string
#define IO_OUT 1 //hcfio_out_string
//DO_ASSERT, create an artificial FALSE to force an ASSERT without the nasty compiler warning
#define DO_ASSERT ( assert_ifbp->IFB_Magic != HCF_MAGIC && assert_ifbp->IFB_Magic == HCF_MAGIC )
#define NT_ASSERT 0x0000 //, NEVER_TESTED
#define NEVER_TESTED MERGE_2( 0xEFFE, 0xFEEF )
#define SE_ASSERT 0x5EFF /* Side Effect, HCFASSERT invokation which are only called for the
* side effect and which should never trigger */
#define DHF_FILE_NAME_OFFSET 10000 //to distinguish DHF from HCF asserts by means of line number
#define MMD_FILE_NAME_OFFSET 20000 //to distinguish MMD from HCF asserts by means of line number
#define DO_ASSERT ( assert_ifbp->IFB_Magic != HCF_MAGIC && assert_ifbp->IFB_Magic == HCF_MAGIC )
#define NT_ASSERT 0x0000 //, NEVER_TESTED
#define NEVER_TESTED MERGE_2( 0xEFFE, 0xFEEF )
#define SE_ASSERT 0x5EFF /* Side Effect, HCFASSERT invokation which are only called for the
* side effect and which should never trigger */
#define DHF_FILE_NAME_OFFSET 10000 //to distinguish DHF from HCF asserts by means of line number
#define MMD_FILE_NAME_OFFSET 20000 //to distinguish MMD from HCF asserts by means of line number
// trace codes used to
// 1: profile execution times via HCF_TRACE and HCF_TRACE_VALUE
// 2: hierarchical flow information via HCFLOGENTRY / HCFLOGEXIT
//#define HCF_TRACE_CONNECT useless
//#define HCF_TRACE_DISCONNECT useless
#define HCF_TRACE_ACTION 0x0000 // 0x0001
#define HCF_TRACE_CNTL 0x0001 // 0x0002
#define HCF_TRACE_DMA_RX_GET 0x0002 // 0x0004
#define HCF_TRACE_DMA_RX_PUT 0x0003 // 0x0008
#define HCF_TRACE_DMA_TX_GET 0x0004 // 0x0010
#define HCF_TRACE_DMA_TX_PUT 0x0005 // 0x0020
#define HCF_TRACE_GET_INFO 0x0006 // 0x0040
#define HCF_TRACE_PUT_INFO 0x0007 // 0x0080
#define HCF_TRACE_RCV_MSG 0x0008 // 0x0100
#define HCF_TRACE_SEND_MSG 0x0009 // 0x0200
#define HCF_TRACE_SERVICE_NIC 0x000A // 0x0400
//#define HCF_TRACE_CONNECT useless
//#define HCF_TRACE_DISCONNECT useless
#define HCF_TRACE_ACTION 0x0000 // 0x0001
#define HCF_TRACE_CNTL 0x0001 // 0x0002
#define HCF_TRACE_DMA_RX_GET 0x0002 // 0x0004
#define HCF_TRACE_DMA_RX_PUT 0x0003 // 0x0008
#define HCF_TRACE_DMA_TX_GET 0x0004 // 0x0010
#define HCF_TRACE_DMA_TX_PUT 0x0005 // 0x0020
#define HCF_TRACE_GET_INFO 0x0006 // 0x0040
#define HCF_TRACE_PUT_INFO 0x0007 // 0x0080
#define HCF_TRACE_RCV_MSG 0x0008 // 0x0100
#define HCF_TRACE_SEND_MSG 0x0009 // 0x0200
#define HCF_TRACE_SERVICE_NIC 0x000A // 0x0400
// #define HCF_TRACE_ 0x000C // 0x1000
// #define HCF_TRACE_ 0x000D // 0x2000
// #define HCF_TRACE_ 0x000E // 0x4000
// #define HCF_TRACE_ 0x000F // 0x8000
// ============================================ HCF_TRACE_... codes below 0x0010 are asserted on re-entry
#define HCF_TRACE_ACTION_KLUDGE 0x0010 /* once you start introducing kludges there is no end to it
* this is an escape to do not assert on re-entrancy problem caused
* by HCF_ACT_INT_FORCE_ON used to get Microsofts NDIS drivers going
*/
#define HCF_TRACE_STRIO 0x0020
#define HCF_TRACE_ALLOC 0X0021
#define HCF_TRACE_DL 0X0023
#define HCF_TRACE_ISR_INFO 0X0024
#define HCF_TRACE_CALIBRATE 0x0026
#define HCF_TRACE_CMD_CPL 0x0040
#define HCF_TRACE_CMD_EXE 0x0041
#define HCF_TRACE_GET_FID 0x0042
#define HCF_TRACE_GET_FRAG 0x0043
#define HCF_TRACE_INIT 0x0044
#define HCF_TRACE_PUT_FRAG 0x0045
#define HCF_TRACE_SETUP_BAP 0x0046
#define HCF_TRACE_EXIT 0x8000 // Keil C warns "long constant truncated to int"
//#define BAP_0 HREG_DATA_0 //Used by DMA controller to access NIC RAM
#define BAP_1 HREG_DATA_1 //Used by HCF to access NIC RAM
// ============================================ HCF_TRACE_... codes below 0x0010 are asserted on re-entry
#define HCF_TRACE_ACTION_KLUDGE 0x0010 /* once you start introducing kludges there is no end to it
* this is an escape to do not assert on re-entrancy problem caused
* by HCF_ACT_INT_FORCE_ON used to get Microsofts NDIS drivers going
*/
#define HCF_TRACE_STRIO 0x0020
#define HCF_TRACE_ALLOC 0X0021
#define HCF_TRACE_DL 0X0023
#define HCF_TRACE_ISR_INFO 0X0024
#define HCF_TRACE_CALIBRATE 0x0026
#define HCF_TRACE_CMD_CPL 0x0040
#define HCF_TRACE_CMD_EXE 0x0041
#define HCF_TRACE_GET_FID 0x0042
#define HCF_TRACE_GET_FRAG 0x0043
#define HCF_TRACE_INIT 0x0044
#define HCF_TRACE_PUT_FRAG 0x0045
#define HCF_TRACE_SETUP_BAP 0x0046
#define HCF_TRACE_EXIT 0x8000 // Keil C warns "long constant truncated to int"
//#define BAP_0 HREG_DATA_0 //Used by DMA controller to access NIC RAM
#define BAP_1 HREG_DATA_1 //Used by HCF to access NIC RAM
//************************* Hermes Receive/Transmit Frame Structures
//HFS_STAT
//see MMD.H for HFS_STAT_ERR
#define HFS_STAT_MSG_TYPE 0xE000 //Hermes reported Message Type
#define HFS_STAT_MIC_KEY_ID 0x1800 //MIC key used (if any)
#define HFS_STAT_1042 0x2000 //RFC1042 Encoded
#define HFS_STAT_TUNNEL 0x4000 //Bridge-Tunnel Encoded
#define HFS_STAT_WMP_MSG 0x6000 //WaveLAN-II Management Protocol Frame
#define HFS_STAT_MSG_TYPE 0xE000 //Hermes reported Message Type
#define HFS_STAT_MIC_KEY_ID 0x1800 //MIC key used (if any)
#define HFS_STAT_1042 0x2000 //RFC1042 Encoded
#define HFS_STAT_TUNNEL 0x4000 //Bridge-Tunnel Encoded
#define HFS_STAT_WMP_MSG 0x6000 //WaveLAN-II Management Protocol Frame
#if (HCF_TYPE) & HCF_TYPE_WPA
#define HFS_STAT_MIC 0x0010 //Frame contains MIC //;? re-instate when F/W ready
#define HFS_STAT_MIC 0x0010 //Frame contains MIC //;? re-instate when F/W ready
#endif
//************************* Hermes Register Offsets and Command bits
#define HREG_IO_RANGE 0x80 //I/O Range used by Hermes
#define HREG_IO_RANGE 0x80 //I/O Range used by Hermes
//************************* Command/Status
#define HREG_CMD 0x00 //
#define HCMD_CMD_CODE 0x3F
#define HREG_PARAM_0 0x02 //
#define HREG_PARAM_1 0x04 //
#define HREG_PARAM_2 0x06 //
#define HREG_STAT 0x08 //
#define HREG_STAT_CMD_CODE 0x003F //
#define HREG_STAT_DIAG_ERR 0x0100
#define HREG_STAT_INQUIRE_ERR 0x0500
#define HREG_STAT_CMD_RESULT 0x7F00 //
#define HREG_RESP_0 0x0A //
#define HREG_RESP_1 0x0C //
#define HREG_RESP_2 0x0E //
#define HREG_CMD 0x00 //
#define HCMD_CMD_CODE 0x3F
#define HREG_PARAM_0 0x02 //
#define HREG_PARAM_1 0x04 //
#define HREG_PARAM_2 0x06 //
#define HREG_STAT 0x08 //
#define HREG_STAT_CMD_CODE 0x003F //
#define HREG_STAT_DIAG_ERR 0x0100
#define HREG_STAT_INQUIRE_ERR 0x0500
#define HREG_STAT_CMD_RESULT 0x7F00 //
#define HREG_RESP_0 0x0A //
#define HREG_RESP_1 0x0C //
#define HREG_RESP_2 0x0E //
//************************* FID Management
#define HREG_INFO_FID 0x10 //
#define HREG_RX_FID 0x20 //
#define HREG_ALLOC_FID 0x22 //
#define HREG_TX_COMPL_FID 0x24 //
#define HREG_INFO_FID 0x10 //
#define HREG_RX_FID 0x20 //
#define HREG_ALLOC_FID 0x22 //
#define HREG_TX_COMPL_FID 0x24 //
//************************* BAP
//20031030 HWi Inserted this again because the dongle code uses this (GPIF.C)
//#define HREG_SELECT_0 0x18 //
//#define HREG_OFFSET_0 0x1C //
//#define HREG_DATA_0 0x36 //
//#define HREG_SELECT_0 0x18 //
//#define HREG_OFFSET_0 0x1C //
//#define HREG_DATA_0 0x36 //
//#define HREG_OFFSET_BUSY 0x8000 // use HCMD_BUSY
#define HREG_OFFSET_ERR 0x4000 //
//rsrvd #define HREG_OFFSET_DATA_OFFSET 0x0FFF //
//#define HREG_OFFSET_BUSY 0x8000 // use HCMD_BUSY
#define HREG_OFFSET_ERR 0x4000 //
//rsrvd #define HREG_OFFSET_DATA_OFFSET 0x0FFF //
#define HREG_SELECT_1 0x1A //
#define HREG_OFFSET_1 0x1E //
#define HREG_DATA_1 0x38 //
#define HREG_SELECT_1 0x1A //
#define HREG_OFFSET_1 0x1E //
#define HREG_DATA_1 0x38 //
//************************* Event
#define HREG_EV_STAT 0x30 //
#define HREG_INT_EN 0x32 //
#define HREG_EV_ACK 0x34 //
#define HREG_EV_STAT 0x30 //
#define HREG_INT_EN 0x32 //
#define HREG_EV_ACK 0x34 //
#define HREG_EV_TICK 0x8000 //Auxiliary Timer Tick
//#define HREG_EV_RES 0x4000 //H-I only: H/W error (Wait Time-out)
#define HREG_EV_INFO_DROP 0x2000 //WMAC did not have sufficient RAM to build Unsollicited Frame
#define HREG_EV_TICK 0x8000 //Auxiliary Timer Tick
//#define HREG_EV_RES 0x4000 //H-I only: H/W error (Wait Time-out)
#define HREG_EV_INFO_DROP 0x2000 //WMAC did not have sufficient RAM to build Unsollicited Frame
#if (HCF_TYPE) & HCF_TYPE_HII5
#define HREG_EV_ACK_REG_READY 0x0000
#define HREG_EV_ACK_REG_READY 0x0000
#else
#define HREG_EV_ACK_REG_READY 0x1000 //Workaround Kludge bit for H-II (not H-II.5)
#define HREG_EV_ACK_REG_READY 0x1000 //Workaround Kludge bit for H-II (not H-II.5)
#endif // HCF_TYPE_HII5
#if (HCF_SLEEP) & ( HCF_CDS | HCF_DDS )
#define HREG_EV_SLEEP_REQ 0x0800
#define HREG_EV_SLEEP_REQ 0x0800
#else
#define HREG_EV_SLEEP_REQ 0x0000
#define HREG_EV_SLEEP_REQ 0x0000
#endif // HCF_CDS / HCF_DDS
#if HCF_DMA
//#define HREG_EV_LPESC 0x0400 // firmware sets this bit and clears it, not for host usage.
#define HREG_EV_RDMAD 0x0200 // rx frame in host memory
#define HREG_EV_TDMAD 0x0100 // tx frame in host memory processed
//#define HREG_EV_RXDMA 0x0040 // firmware kicks off DMA engine (bit is not for host usage)
//#define HREG_EV_TXDMA 0x0020 // firmware kicks off DMA engine (bit is not for host usage)
#define HREG_EV_FW_DMA 0x0460 // firmware / DMA engine I/F (bits are not for host usage)
//#define HREG_EV_LPESC 0x0400 // firmware sets this bit and clears it, not for host usage.
#define HREG_EV_RDMAD 0x0200 // rx frame in host memory
#define HREG_EV_TDMAD 0x0100 // tx frame in host memory processed
//#define HREG_EV_RXDMA 0x0040 // firmware kicks off DMA engine (bit is not for host usage)
//#define HREG_EV_TXDMA 0x0020 // firmware kicks off DMA engine (bit is not for host usage)
#define HREG_EV_FW_DMA 0x0460 // firmware / DMA engine I/F (bits are not for host usage)
#else
#define HREG_EV_FW_DMA 0x0000
#define HREG_EV_FW_DMA 0x0000
#endif // HCF_DMA
#define HREG_EV_INFO 0x0080 // Asynchronous Information Frame
#define HREG_EV_CMD 0x0010 // Command completed, Status and Response available
#define HREG_EV_ALLOC 0x0008 // Asynchronous part of Allocation/Reclaim completed
#define HREG_EV_TX_EXC 0x0004 // Asynchronous Transmission unsuccessful completed
#define HREG_EV_TX 0x0002 // Asynchronous Transmission successful completed
#define HREG_EV_RX 0x0001 // Asynchronous Receive Frame
#define HREG_EV_TX_EXT ( (HCF_EXT) & (HCF_EXT_INT_TX_EX | HCF_EXT_INT_TICK ) )
/* HREG_EV_TX_EXT := 0x0000 or HREG_EV_TX_EXC and/or HREG_EV_TICK
* could be extended with HREG_EV_TX */
#define HREG_EV_INFO 0x0080 // Asynchronous Information Frame
#define HREG_EV_CMD 0x0010 // Command completed, Status and Response available
#define HREG_EV_ALLOC 0x0008 // Asynchronous part of Allocation/Reclaim completed
#define HREG_EV_TX_EXC 0x0004 // Asynchronous Transmission unsuccessful completed
#define HREG_EV_TX 0x0002 // Asynchronous Transmission successful completed
#define HREG_EV_RX 0x0001 // Asynchronous Receive Frame
#define HREG_EV_TX_EXT ( (HCF_EXT) & (HCF_EXT_INT_TX_EX | HCF_EXT_INT_TICK ) )
/* HREG_EV_TX_EXT := 0x0000 or HREG_EV_TX_EXC and/or HREG_EV_TICK
* could be extended with HREG_EV_TX */
#if HCF_EXT_INT_TX_EX != HREG_EV_TX_EXC
err: these values should match;
#endif // HCF_EXT_INT_TX_EX / HREG_EV_TX_EXC
......@@ -290,97 +253,97 @@ err: these values should match;
#endif // HCF_EXT_INT_TICK / HREG_EV_TICK
//************************* Host Software
#define HREG_SW_0 0x28 //
#define HREG_SW_1 0x2A //
#define HREG_SW_2 0x2C //
//rsrvd #define HREG_SW_3 0x2E //
#define HREG_SW_0 0x28 //
#define HREG_SW_1 0x2A //
#define HREG_SW_2 0x2C //
//rsrvd #define HREG_SW_3 0x2E //
//************************* Control and Auxiliary Port
#define HREG_IO 0x12
#define HREG_IO_SRESET 0x0001
#define HREG_IO_WAKEUP_ASYNC 0x0002
#define HREG_IO_WOKEN_UP 0x0004
#define HREG_CNTL 0x14 //
//#define HREG_CNTL_WAKEUP_SYNC 0x0001
#define HREG_CNTL_AUX_ENA_STAT 0xC000
#define HREG_CNTL_AUX_DIS_STAT 0x0000
#define HREG_CNTL_AUX_ENA_CNTL 0x8000
#define HREG_CNTL_AUX_DIS_CNTL 0x4000
#define HREG_CNTL_AUX_DSD 0x2000
#define HREG_CNTL_AUX_ENA (HREG_CNTL_AUX_ENA_CNTL | HREG_CNTL_AUX_DIS_CNTL )
#define HREG_SPARE 0x16 //
#define HREG_AUX_PAGE 0x3A //
#define HREG_AUX_OFFSET 0x3C //
#define HREG_AUX_DATA 0x3E //
#define HREG_IO 0x12
#define HREG_IO_SRESET 0x0001
#define HREG_IO_WAKEUP_ASYNC 0x0002
#define HREG_IO_WOKEN_UP 0x0004
#define HREG_CNTL 0x14 //
//#define HREG_CNTL_WAKEUP_SYNC 0x0001
#define HREG_CNTL_AUX_ENA_STAT 0xC000
#define HREG_CNTL_AUX_DIS_STAT 0x0000
#define HREG_CNTL_AUX_ENA_CNTL 0x8000
#define HREG_CNTL_AUX_DIS_CNTL 0x4000
#define HREG_CNTL_AUX_DSD 0x2000
#define HREG_CNTL_AUX_ENA (HREG_CNTL_AUX_ENA_CNTL | HREG_CNTL_AUX_DIS_CNTL )
#define HREG_SPARE 0x16 //
#define HREG_AUX_PAGE 0x3A //
#define HREG_AUX_OFFSET 0x3C //
#define HREG_AUX_DATA 0x3E //
#if HCF_DMA
//************************* DMA (bus mastering)
// Be careful to use these registers only at a genuine 32 bits NIC
// On 16 bits NICs, these addresses are mapped into the range 0x00 through 0x3F with all consequences
// thereof, e.g. HREG_DMA_CTRL register maps to HREG_CMD.
#define HREG_DMA_CTRL 0x0040
#define HREG_TXDMA_PTR32 0x0044
#define HREG_TXDMA_PRIO_PTR32 0x0048
#define HREG_TXDMA_HIPRIO_PTR32 0x004C
#define HREG_RXDMA_PTR32 0x0050
#define HREG_CARDDETECT_1 0x007C // contains 7D37
#define HREG_CARDDETECT_2 0x007E // contains 7DE7
#define HREG_FREETIMER 0x0058
#define HREG_DMA_RX_CNT 0x0026
// Be careful to use these registers only at a genuine 32 bits NIC
// On 16 bits NICs, these addresses are mapped into the range 0x00 through 0x3F with all consequences
// thereof, e.g. HREG_DMA_CTRL register maps to HREG_CMD.
#define HREG_DMA_CTRL 0x0040
#define HREG_TXDMA_PTR32 0x0044
#define HREG_TXDMA_PRIO_PTR32 0x0048
#define HREG_TXDMA_HIPRIO_PTR32 0x004C
#define HREG_RXDMA_PTR32 0x0050
#define HREG_CARDDETECT_1 0x007C // contains 7D37
#define HREG_CARDDETECT_2 0x007E // contains 7DE7
#define HREG_FREETIMER 0x0058
#define HREG_DMA_RX_CNT 0x0026
/******************************************************************************
* Defines for the bits in the DmaControl register (@40h)
******************************************************************************/
#define HREG_DMA_CTRL_RXHWEN 0x80000000 // high word enable bit
#define HREG_DMA_CTRL_RXRESET 0x40000000 // tx dma init bit
#define HREG_DMA_CTRL_RXBAP1 BIT29
#define HREG_DMA_CTRL_RX_STALLED BIT28
#define HREG_DMA_CTRL_RXAUTOACK_DMADONE BIT27 // no host involvement req. for TDMADONE event
#define HREG_DMA_CTRL_RXAUTOACK_INFO BIT26 // no host involvement req. for alloc event
#define HREG_DMA_CTRL_RXAUTOACK_DMAEN 0x02000000 // no host involvement req. for TxDMAen event
#define HREG_DMA_CTRL_RXAUTOACK_RX 0x01000000 // no host involvement req. for tx event
#define HREG_DMA_CTRL_RX_BUSY BIT23 // read only bit
//#define HREG_DMA_CTRL_RX_RBUFCONT_PLAIN 0 // bits 21..20
//#define HREG_DMA_CTRL_RX_MODE_PLAIN_DMA 0 // mode 0
#define HREG_DMA_CTRL_RX_MODE_SINGLE_PACKET 0x00010000 // mode 1
#define HREG_DMA_CTRL_RX_MODE_MULTI_PACKET 0x00020000 // mode 2
//#define HREG_DMA_CTRL_RX_MODE_DISABLE (0x00020000|0x00010000) // disable tx dma engine
#define HREG_DMA_CTRL_TXHWEN 0x8000 // low word enable bit
#define HREG_DMA_CTRL_TXRESET 0x4000 // rx dma init bit
#define HREG_DMA_CTRL_TXBAP1 BIT13
#define HREG_DMA_CTRL_TXAUTOACK_DMADONE BIT11 // no host involvement req. for RxDMADONE event
#define HREG_DMA_CTRL_TXAUTOACK_DMAEN 0x00000400 // no host involvement req. for RxDMAen event
#define HREG_DMA_CTRL_TXAUTOACK_DMAALLOC 0x00000200 // no host involvement req. for info event
#define HREG_DMA_CTRL_TXAUTOACK_TX 0x00000100 // no host involvement req. for rx event
#define HREG_DMA_CTRL_TX_BUSY BIT7 // read only bit
//#define HREG_DMA_CTRL_TX_TBUFCONT_PLAIN 0 // bits 6..5
//#define HREG_DMA_CTRL_TX_MODE_PLAIN_DMA 0 // mode 0
#define HREG_DMA_CTRL_TX_MODE_SINGLE_PACKET BIT0 // mode 1
#define HREG_DMA_CTRL_TX_MODE_MULTI_PACKET 0x00000002 // mode 2
//#define HREG_DMA_CTRL_TX_MODE_DISABLE (0x00000001|0x00000002) // disable tx dma engine
* Defines for the bits in the DmaControl register (@40h)
******************************************************************************/
#define HREG_DMA_CTRL_RXHWEN 0x80000000 // high word enable bit
#define HREG_DMA_CTRL_RXRESET 0x40000000 // tx dma init bit
#define HREG_DMA_CTRL_RXBAP1 BIT29
#define HREG_DMA_CTRL_RX_STALLED BIT28
#define HREG_DMA_CTRL_RXAUTOACK_DMADONE BIT27 // no host involvement req. for TDMADONE event
#define HREG_DMA_CTRL_RXAUTOACK_INFO BIT26 // no host involvement req. for alloc event
#define HREG_DMA_CTRL_RXAUTOACK_DMAEN 0x02000000 // no host involvement req. for TxDMAen event
#define HREG_DMA_CTRL_RXAUTOACK_RX 0x01000000 // no host involvement req. for tx event
#define HREG_DMA_CTRL_RX_BUSY BIT23 // read only bit
//#define HREG_DMA_CTRL_RX_RBUFCONT_PLAIN 0 // bits 21..20
//#define HREG_DMA_CTRL_RX_MODE_PLAIN_DMA 0 // mode 0
#define HREG_DMA_CTRL_RX_MODE_SINGLE_PACKET 0x00010000 // mode 1
#define HREG_DMA_CTRL_RX_MODE_MULTI_PACKET 0x00020000 // mode 2
//#define HREG_DMA_CTRL_RX_MODE_DISABLE (0x00020000|0x00010000) // disable tx dma engine
#define HREG_DMA_CTRL_TXHWEN 0x8000 // low word enable bit
#define HREG_DMA_CTRL_TXRESET 0x4000 // rx dma init bit
#define HREG_DMA_CTRL_TXBAP1 BIT13
#define HREG_DMA_CTRL_TXAUTOACK_DMADONE BIT11 // no host involvement req. for RxDMADONE event
#define HREG_DMA_CTRL_TXAUTOACK_DMAEN 0x00000400 // no host involvement req. for RxDMAen event
#define HREG_DMA_CTRL_TXAUTOACK_DMAALLOC 0x00000200 // no host involvement req. for info event
#define HREG_DMA_CTRL_TXAUTOACK_TX 0x00000100 // no host involvement req. for rx event
#define HREG_DMA_CTRL_TX_BUSY BIT7 // read only bit
//#define HREG_DMA_CTRL_TX_TBUFCONT_PLAIN 0 // bits 6..5
//#define HREG_DMA_CTRL_TX_MODE_PLAIN_DMA 0 // mode 0
#define HREG_DMA_CTRL_TX_MODE_SINGLE_PACKET BIT0 // mode 1
#define HREG_DMA_CTRL_TX_MODE_MULTI_PACKET 0x00000002 // mode 2
//#define HREG_DMA_CTRL_TX_MODE_DISABLE (0x00000001|0x00000002) // disable tx dma engine
//configuration DWORD to configure DMA for mode2 operation, using BAP0 as the DMA BAP.
#define DMA_CTRLSTAT_GO (HREG_DMA_CTRL_RXHWEN | HREG_DMA_CTRL_RX_MODE_MULTI_PACKET | \
HREG_DMA_CTRL_RXAUTOACK_DMAEN | HREG_DMA_CTRL_RXAUTOACK_RX | \
HREG_DMA_CTRL_TXHWEN | /*;?HREG_DMA_CTRL_TX_TBUFCONT_PLAIN |*/ \
HREG_DMA_CTRL_TX_MODE_MULTI_PACKET | HREG_DMA_CTRL_TXAUTOACK_DMAEN |\
HREG_DMA_CTRL_TX_MODE_MULTI_PACKET | HREG_DMA_CTRL_TXAUTOACK_DMAEN | \
HREG_DMA_CTRL_TXAUTOACK_DMAALLOC)
//configuration DWORD to reset both the Tx and Rx DMA engines
#define DMA_CTRLSTAT_RESET (HREG_DMA_CTRL_RXHWEN | HREG_DMA_CTRL_RXRESET | HREG_DMA_CTRL_TXHWEN | HREG_DMA_CTRL_TXRESET)
//#define DESC_DMA_OWNED 0x80000000 // BIT31
#define DESC_DMA_OWNED 0x8000 // BIT31
#define DESC_SOP 0x8000 // BIT15
#define DESC_EOP 0x4000 // BIT14
//#define DESC_DMA_OWNED 0x80000000 // BIT31
#define DESC_DMA_OWNED 0x8000 // BIT31
#define DESC_SOP 0x8000 // BIT15
#define DESC_EOP 0x4000 // BIT14
#define DMA_RX 0
#define DMA_TX 1
#define DMA_RX 0
#define DMA_TX 1
// #define IFB_RxFirstDesc IFB_FirstDesc[DMA_RX]
// #define IFB_TxFirstDesc IFB_FirstDesc[DMA_TX]
// #define IFB_RxLastDesc IFB_LastDesc[DMA_RX]
// #define IFB_TxLastDesc IFB_LastDesc[DMA_TX]
// #define IFB_RxFirstDesc IFB_FirstDesc[DMA_RX]
// #define IFB_TxFirstDesc IFB_FirstDesc[DMA_TX]
// #define IFB_RxLastDesc IFB_LastDesc[DMA_RX]
// #define IFB_TxLastDesc IFB_LastDesc[DMA_TX]
#endif // HCF_DMA
//
......@@ -390,96 +353,96 @@ err: these values should match;
// Hermes Command Codes and Qualifier bits
#define HCMD_BUSY 0x8000 // Busy bit, applicable for all commands
#define HCMD_INI 0x0000 //
#define HCMD_ENABLE HCF_CNTL_ENABLE // 0x0001
#define HCMD_DISABLE HCF_CNTL_DISABLE // 0x0002
#define HCMD_CONNECT HCF_CNTL_CONNECT // 0x0003
#define HCMD_EXECUTE 0x0004 //
#define HCMD_DISCONNECT HCF_CNTL_DISCONNECT // 0x0005
#define HCMD_SLEEP 0x0006 //
#define HCMD_CONTINUE HCF_CNTL_CONTINUE // 0x0007
#define HCMD_RETRY 0x0100 // Retry bit
#define HCMD_ALLOC 0x000A //
#define HCMD_TX 0x000B //
#define HCMD_RECL 0x0100 // Reclaim bit, applicable for Tx and Inquire
#define HCMD_INQUIRE 0x0011 //
#define HCMD_ACCESS 0x0021 //
#define HCMD_ACCESS_WRITE 0x0100 // Write bit
#define HCMD_PROGRAM 0x0022 //
#define HCMD_READ_MIF 0x0030
#define HCMD_WRITE_MIF 0x0031
#define HCMD_THESEUS 0x0038
#define HCMD_STARTPREAMBLE 0x0E00 // Start continuous preamble Tx
#define HCMD_STOP 0x0F00 // Stop Theseus test mode
#define HCMD_BUSY 0x8000 // Busy bit, applicable for all commands
#define HCMD_INI 0x0000 //
#define HCMD_ENABLE HCF_CNTL_ENABLE // 0x0001
#define HCMD_DISABLE HCF_CNTL_DISABLE // 0x0002
#define HCMD_CONNECT HCF_CNTL_CONNECT // 0x0003
#define HCMD_EXECUTE 0x0004 //
#define HCMD_DISCONNECT HCF_CNTL_DISCONNECT // 0x0005
#define HCMD_SLEEP 0x0006 //
#define HCMD_CONTINUE HCF_CNTL_CONTINUE // 0x0007
#define HCMD_RETRY 0x0100 // Retry bit
#define HCMD_ALLOC 0x000A //
#define HCMD_TX 0x000B //
#define HCMD_RECL 0x0100 // Reclaim bit, applicable for Tx and Inquire
#define HCMD_INQUIRE 0x0011 //
#define HCMD_ACCESS 0x0021 //
#define HCMD_ACCESS_WRITE 0x0100 // Write bit
#define HCMD_PROGRAM 0x0022 //
#define HCMD_READ_MIF 0x0030
#define HCMD_WRITE_MIF 0x0031
#define HCMD_THESEUS 0x0038
#define HCMD_STARTPREAMBLE 0x0E00 // Start continuous preamble Tx
#define HCMD_STOP 0x0F00 // Stop Theseus test mode
//Configuration Management
//
#define CFG_DRV_ACT_RANGES_PRI_3_BOTTOM 1 // Default Bottom Compatibility for Primary Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_PRI_3_TOP 1 // Default Top Compatibility for Primary Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_PRI_3_BOTTOM 1 // Default Bottom Compatibility for Primary Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_PRI_3_TOP 1 // Default Top Compatibility for Primary Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_HSI_4_BOTTOM 1 // Default Bottom Compatibility for H/W - driver I/F
#define CFG_DRV_ACT_RANGES_HSI_4_TOP 1 // Default Top Compatibility for H/W - driver I/F
#define CFG_DRV_ACT_RANGES_HSI_4_BOTTOM 1 // Default Bottom Compatibility for H/W - driver I/F
#define CFG_DRV_ACT_RANGES_HSI_4_TOP 1 // Default Top Compatibility for H/W - driver I/F
#define CFG_DRV_ACT_RANGES_HSI_5_BOTTOM 1 // Default Bottom Compatibility for H/W - driver I/F
#define CFG_DRV_ACT_RANGES_HSI_5_TOP 1 // Default Top Compatibility for H/W - driver I/F
#define CFG_DRV_ACT_RANGES_HSI_5_BOTTOM 1 // Default Bottom Compatibility for H/W - driver I/F
#define CFG_DRV_ACT_RANGES_HSI_5_TOP 1 // Default Top Compatibility for H/W - driver I/F
#if (HCF_TYPE) & HCF_TYPE_WPA
#define CFG_DRV_ACT_RANGES_APF_1_BOTTOM 16 // Default Bottom Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_1_TOP 16 // Default Top Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_1_BOTTOM 16 // Default Bottom Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_1_TOP 16 // Default Top Compatibility for AP Firmware - driver I/F
#else //;? is this REALLY O.K.
#define CFG_DRV_ACT_RANGES_APF_1_BOTTOM 1 // Default Bottom Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_1_TOP 1 // Default Top Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_1_BOTTOM 1 // Default Bottom Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_1_TOP 1 // Default Top Compatibility for AP Firmware - driver I/F
#endif // HCF_TYPE_WPA
#define CFG_DRV_ACT_RANGES_APF_2_BOTTOM 2 // Default Bottom Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_2_TOP 2 // Default Top Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_2_BOTTOM 2 // Default Bottom Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_2_TOP 2 // Default Top Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_3_BOTTOM 1 // Default Bottom Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_3_TOP 1 // Default Top Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_3_BOTTOM 1 // Default Bottom Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_3_TOP 1 // Default Top Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_4_BOTTOM 1 // Default Bottom Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_4_TOP 1 // Default Top Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_4_BOTTOM 1 // Default Bottom Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_4_TOP 1 // Default Top Compatibility for AP Firmware - driver I/F
#if (HCF_TYPE) & HCF_TYPE_HII5
#define CFG_DRV_ACT_RANGES_STA_2_BOTTOM 6 // Default Bottom Compatibility for Station Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_STA_2_TOP 6 // Default Top Compatibility for Station Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_STA_2_BOTTOM 6 // Default Bottom Compatibility for Station Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_STA_2_TOP 6 // Default Top Compatibility for Station Firmware - driver I/F
#else // (HCF_TYPE) & HCF_TYPE_HII5
#define CFG_DRV_ACT_RANGES_STA_2_BOTTOM 1 // Default Bottom Compatibility for Station Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_STA_2_TOP 2 // Default Top Compatibility for Station Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_STA_2_BOTTOM 1 // Default Bottom Compatibility for Station Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_STA_2_TOP 2 // Default Top Compatibility for Station Firmware - driver I/F
#endif // (HCF_TYPE) & HCF_TYPE_HII5
#define CFG_DRV_ACT_RANGES_STA_3_BOTTOM 1 // Default Bottom Compatibility for Station Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_STA_3_TOP 1 // Default Top Compatibility for Station Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_STA_3_BOTTOM 1 // Default Bottom Compatibility for Station Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_STA_3_TOP 1 // Default Top Compatibility for Station Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_STA_4_BOTTOM 1 // Default Bottom Compatibility for Station Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_STA_4_TOP 1 // Default Top Compatibility for Station Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_STA_4_BOTTOM 1 // Default Bottom Compatibility for Station Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_STA_4_TOP 1 // Default Top Compatibility for Station Firmware - driver I/F
//---------------------------------------------------------------------------------------------------------------------
#if defined HCF_CFG_PRI_1_TOP || defined HCF_CFG_PRI_1_BOTTOM
err: PRI_1 not supported for H-I; // Compatibility for Primary Firmware - driver I/F
err: PRI_1 not supported for H-I; // Compatibility for Primary Firmware - driver I/F
#endif // HCF_CFG_PRI_1_TOP / HCF_CFG_PRI_1_BOTTOM
#if defined HCF_CFG_PRI_2_TOP || defined HCF_CFG_PRI_2_BOTTOM
err: PRI_2 not supported for H-I; // Compatibility for Primary Firmware - driver I/F
err: PRI_2 not supported for H-I; // Compatibility for Primary Firmware - driver I/F
#endif // HCF_CFG_PRI_2_TOP / HCF_CFG_PRI_2_BOTTOM
#ifdef HCF_CFG_PRI_3_TOP // Top Compatibility for Primary Firmware - driver I/F
#if HCF_CFG_PRI_3_TOP == 0 || \
#ifdef HCF_CFG_PRI_3_TOP // Top Compatibility for Primary Firmware - driver I/F
#if HCF_CFG_PRI_3_TOP == 0 || \
CFG_DRV_ACT_RANGES_PRI_3_BOTTOM <= HCF_CFG_PRI_3_TOP && HCF_CFG_PRI_3_TOP <= CFG_DRV_ACT_RANGES_PRI_3_TOP
#undef CFG_DRV_ACT_RANGES_PRI_3_TOP
#define CFG_DRV_ACT_RANGES_PRI_3_TOP HCF_CFG_PRI_3_TOP
#define CFG_DRV_ACT_RANGES_PRI_3_TOP HCF_CFG_PRI_3_TOP
#else
err: ;
#endif
#endif // HCF_CFG_PRI_3_TOP
#ifdef HCF_CFG_PRI_3_BOTTOM // Bottom Compatibility for Primary Firmware - driver I/F
#ifdef HCF_CFG_PRI_3_BOTTOM // Bottom Compatibility for Primary Firmware - driver I/F
#if CFG_DRV_ACT_RANGES_PRI_3_BOTTOM <= HCF_CFG_PRI_3_BOTTOM && HCF_CFG_PRI_3_BOTTOM <= CFG_DRV_ACT_RANGES_PRI_3_TOP
#undef CFG_DRV_ACT_RANGES_PRI_3_BOTTOM
#define CFG_DRV_ACT_RANGES_PRI_3_BOTTOM HCF_CFG_PRI_3_BOTTOM
#define CFG_DRV_ACT_RANGES_PRI_3_BOTTOM HCF_CFG_PRI_3_BOTTOM
#else
err: ;
#endif
......@@ -488,77 +451,77 @@ err: ;
//---------------------------------------------------------------------------------------------------------------------
#if defined HCF_CFG_HSI_0_TOP || defined HCF_CFG_HSI_0_BOTTOM
err: HSI_0 not supported for H-I; // Compatibility for HSI I/F
err: HSI_0 not supported for H-I; // Compatibility for HSI I/F
#endif // HCF_CFG_HSI_0_TOP / HCF_CFG_HSI_0_BOTTOM
#if defined HCF_CFG_HSI_1_TOP || defined HCF_CFG_HSI_1_BOTTOM
err: HSI_1 not supported for H-I; // Compatibility for HSI I/F
err: HSI_1 not supported for H-I; // Compatibility for HSI I/F
#endif // HCF_CFG_HSI_1_TOP / HCF_CFG_HSI_1_BOTTOM
#if defined HCF_CFG_HSI_2_TOP || defined HCF_CFG_HSI_2_BOTTOM
err: HSI_2 not supported for H-I; // Compatibility for HSI I/F
err: HSI_2 not supported for H-I; // Compatibility for HSI I/F
#endif // HCF_CFG_HSI_2_TOP / HCF_CFG_HSI_2_BOTTOM
#if defined HCF_CFG_HSI_3_TOP || defined HCF_CFG_HSI_3_BOTTOM
err: HSI_3 not supported for H-I; // Compatibility for HSI I/F
err: HSI_3 not supported for H-I; // Compatibility for HSI I/F
#endif // HCF_CFG_HSI_3_TOP / HCF_CFG_HSI_3_BOTTOM
#ifdef HCF_CFG_HSI_4_TOP // Top Compatibility for HSI I/F
#if HCF_CFG_HSI_4_TOP == 0 || \
#ifdef HCF_CFG_HSI_4_TOP // Top Compatibility for HSI I/F
#if HCF_CFG_HSI_4_TOP == 0 || \
CFG_DRV_ACT_RANGES_HSI_4_BOTTOM <= CF_CFG_HSI_4_TOP && HCF_CFG_HSI_4_TOP <= CFG_DRV_ACT_RANGES_HSI_4_TOP
#undef CFG_DRV_ACT_RANGES_HSI_4_TOP
#define CFG_DRV_ACT_RANGES_HSI_4_TOP HCF_CFG_HSI_4_TOP
#define CFG_DRV_ACT_RANGES_HSI_4_TOP HCF_CFG_HSI_4_TOP
#else
err: ;
#endif
#endif // HCF_CFG_HSI_4_TOP
#ifdef HCF_CFG_HSI_4_BOTTOM // Bottom Compatibility for HSI I/F
#ifdef HCF_CFG_HSI_4_BOTTOM // Bottom Compatibility for HSI I/F
#if CFG_DRV_ACT_RANGES_HSI_4_BOTTOM <= HCF_CFG_HSI_4_BOTTOM && HCF_CFG_HSI_4_BOTTOM <= CFG_DRV_ACT_RANGES_HSI_4_TOP
#undef CFG_DRV_ACT_RANGES_HSI_4_BOTTOM
#define CFG_DRV_ACT_RANGES_HSI_4_BOTTOM HCF_CFG_HSI_4_BOTTOM
#define CFG_DRV_ACT_RANGES_HSI_4_BOTTOM HCF_CFG_HSI_4_BOTTOM
#else
err: ;
#endif
#endif // HCF_CFG_HSI_4_BOTTOM
#ifdef HCF_CFG_HSI_5_TOP // Top Compatibility for HSI I/F
#if HCF_CFG_HSI_5_TOP == 0 || \
#ifdef HCF_CFG_HSI_5_TOP // Top Compatibility for HSI I/F
#if HCF_CFG_HSI_5_TOP == 0 || \
CFG_DRV_ACT_RANGES_HSI_5_BOTTOM <= CF_CFG_HSI_5_TOP && HCF_CFG_HSI_5_TOP <= CFG_DRV_ACT_RANGES_HSI_5_TOP
#undef CFG_DRV_ACT_RANGES_HSI_5_TOP
#define CFG_DRV_ACT_RANGES_HSI_5_TOP HCF_CFG_HSI_5_TOP
#define CFG_DRV_ACT_RANGES_HSI_5_TOP HCF_CFG_HSI_5_TOP
#else
err: ;
#endif
#endif // HCF_CFG_HSI_5_TOP
#ifdef HCF_CFG_HSI_5_BOTTOM // Bottom Compatibility for HSI I/F
#ifdef HCF_CFG_HSI_5_BOTTOM // Bottom Compatibility for HSI I/F
#if CFG_DRV_ACT_RANGES_HSI_5_BOTTOM <= HCF_CFG_HSI_5_BOTTOM && HCF_CFG_HSI_5_BOTTOM <= CFG_DRV_ACT_RANGES_HSI_5_TOP
#undef CFG_DRV_ACT_RANGES_HSI_5_BOTTOM
#define CFG_DRV_ACT_RANGES_HSI_5_BOTTOM HCF_CFG_HSI_5_BOTTOM
#define CFG_DRV_ACT_RANGES_HSI_5_BOTTOM HCF_CFG_HSI_5_BOTTOM
#else
err: ;
#endif
#endif // HCF_CFG_HSI_5_BOTTOM
//---------------------------------------------------------------------------------------------------------------------
#if defined HCF_CFG_APF_1_TOP || defined HCF_CFG_APF_1_BOTTOM
err: APF_1 not supported for H-I; // Compatibility for AP Firmware - driver I/F
err: APF_1 not supported for H-I; // Compatibility for AP Firmware - driver I/F
#endif // HCF_CFG_APF_1_TOP / HCF_CFG_APF_1_BOTTOM
#ifdef HCF_CFG_APF_2_TOP // Top Compatibility for AP Firmware - driver I/F
#if HCF_CFG_APF_2_TOP == 0 || \
#ifdef HCF_CFG_APF_2_TOP // Top Compatibility for AP Firmware - driver I/F
#if HCF_CFG_APF_2_TOP == 0 || \
CFG_DRV_ACT_RANGES_APF_2_BOTTOM <= HCF_CFG_APF_2_TOP && HCF_CFG_APF_2_TOP <= CFG_DRV_ACT_RANGES_APF_2_TOP
#undef CFG_DRV_ACT_RANGES_APF_2_TOP
#define CFG_DRV_ACT_RANGES_APF_2_TOP HCF_CFG_APF_2_TOP
#define CFG_DRV_ACT_RANGES_APF_2_TOP HCF_CFG_APF_2_TOP
#else
err: ;
#endif
#endif // HCF_CFG_APF_TOP
#ifdef HCF_CFG_APF_2_BOTTOM // Bottom Compatibility for AP Firmware - driver I/F
#ifdef HCF_CFG_APF_2_BOTTOM // Bottom Compatibility for AP Firmware - driver I/F
#if CFG_DRV_ACT_RANGES_APF_2_BOTTOM <= HCF_CFG_APF_2_BOTTOM && HCF_CFG_APF_2_BOTTOM <= CFG_DRV_ACT_RANGES_APF_2_TOP
#undef CFG_DRV_ACT_RANGES_APF_2_BOTTOM
#define CFG_DRV_ACT_RANGES_APF_2_BOTTOM HCF_CFG_APF_2_BOTTOM
#define CFG_DRV_ACT_RANGES_APF_2_BOTTOM HCF_CFG_APF_2_BOTTOM
#else
err: ;
#endif
......@@ -566,23 +529,23 @@ err: ;
//---------------------------------------------------------------------------------------------------------------------
#if defined HCF_CFG_STA_1_TOP || defined HCF_CFG_STA_1_BOTTOM
err: STA_1 not supported for H-I; // Compatibility for Station Firmware - driver I/F
err: STA_1 not supported for H-I; // Compatibility for Station Firmware - driver I/F
#endif // HCF_CFG_STA_1_TOP / HCF_CFG_STA_1_BOTTOM
#ifdef HCF_CFG_STA_2_TOP // Top Compatibility for Station Firmware - driver I/F
#if HCF_CFG_STA_2_TOP == 0 || \
#ifdef HCF_CFG_STA_2_TOP // Top Compatibility for Station Firmware - driver I/F
#if HCF_CFG_STA_2_TOP == 0 || \
CFG_DRV_ACT_RANGES_STA_2_BOTTOM <= HCF_CFG_STA_2_TOP && HCF_CFG_STA_2_TOP <= CFG_DRV_ACT_RANGES_STA_2_TOP
#undef CFG_DRV_ACT_RANGES_STA_2_TOP
#define CFG_DRV_ACT_RANGES_STA_2_TOP HCF_CFG_STA_2_TOP
#define CFG_DRV_ACT_RANGES_STA_2_TOP HCF_CFG_STA_2_TOP
#else
err: ;
#endif
#endif // HCF_CFG_STA_TOP
#ifdef HCF_CFG_STA_2_BOTTOM // Bottom Compatibility for Station Firmware - driver I/F
#ifdef HCF_CFG_STA_2_BOTTOM // Bottom Compatibility for Station Firmware - driver I/F
#if CFG_DRV_ACT_RANGES_STA_2_BOTTOM <= HCF_CFG_STA_2_BOTTOM && HCF_CFG_STA_2_BOTTOM <= CFG_DRV_ACT_RANGES_STA_2_TOP
#undef CFG_DRV_ACT_RANGES_STA_2_BOTTOM
#define CFG_DRV_ACT_RANGES_STA_2_BOTTOM HCF_CFG_STA_2_BOTTOM
#define CFG_DRV_ACT_RANGES_STA_2_BOTTOM HCF_CFG_STA_2_BOTTOM
#else
err: ;
#endif
......@@ -597,32 +560,32 @@ err: ;
#if defined MSF_WAIT
err: MSF should no longer supply this macro;
#else
#define MSF_WAIT(x) \
{ PROT_CNT_INI \
HCF_WAIT_WHILE( ( IPW( HREG_IO ) & HREG_IO_WOKEN_UP ) == 0 ); \
HCFASSERT( prot_cnt, IPW( HREG_IO ) ) \
}
#define MSF_WAIT(x) \
{ PROT_CNT_INI \
HCF_WAIT_WHILE( ( IPW( HREG_IO ) & HREG_IO_WOKEN_UP ) == 0 ); \
HCFASSERT( prot_cnt, IPW( HREG_IO ) ) \
}
#endif // MSF_WAIT
#else
#define MSF_WAIT(x) /*NOP*/
#define MSF_WAIT(x) /*NOP*/
#endif // HCF_SLEEP
#define LOF(x) (sizeof(x)/sizeof(hcf_16)-1)
#define LOF(x) (sizeof(x)/sizeof(hcf_16)-1)
#define MUL_BY_2( x ) ( (x) << 1 ) //used to multiply by 2
#define DIV_BY_2( x ) ( (x) >> 1 ) //used to divide by 2
#define MUL_BY_2( x ) ( (x) << 1 ) //used to multiply by 2
#define DIV_BY_2( x ) ( (x) >> 1 ) //used to divide by 2
//resolve problems on for some 16 bits compilers to create 32 bit values
#define MERGE_2( hw, lw ) ( ( ((hcf_32)(hw)) << 16 ) | ((hcf_16)(lw)) )
#define MERGE_2( hw, lw ) ( ( ((hcf_32)(hw)) << 16 ) | ((hcf_16)(lw)) )
#if ! defined HCF_STATIC
#define HCF_STATIC static
#endif // HCF_STATIC
#define HCF_STATIC static
#endif // HCF_STATIC
#if ( (HCF_TYPE) & HCF_TYPE_HII5 ) == 0
#define DAWA_ACK( mask) { \
OPW( HREG_EV_ACK, mask | HREG_EV_ACK_REG_READY ); \
OPW( HREG_EV_ACK, (mask & ~HREG_EV_ALLOC) | HREG_EV_ACK_REG_READY ); }
#define DAWA_ACK( mask) { \
OPW( HREG_EV_ACK, mask | HREG_EV_ACK_REG_READY ); \
OPW( HREG_EV_ACK, (mask & ~HREG_EV_ALLOC) | HREG_EV_ACK_REG_READY ); }
#define DAWA_ZERO_FID(reg) OPW( reg, 0 );
#else
#define DAWA_ACK( mask) OPW( HREG_EV_ACK, mask );
......@@ -630,20 +593,20 @@ err: MSF should no longer supply this macro;
#endif // HCF_TYPE_HII5
#if (HCF_TYPE) & HCF_TYPE_WPA
#define CALC_RX_MIC( p, len ) calc_mic_rx_frag( ifbp, p, len )
#define CALC_TX_MIC( p, len ) calc_mic_tx_frag( ifbp, p, len )
#define CALC_RX_MIC( p, len ) calc_mic_rx_frag( ifbp, p, len )
#define CALC_TX_MIC( p, len ) calc_mic_tx_frag( ifbp, p, len )
#define IF_SSN(x) x
#define IF_NOT_SSN(x)
#else
#define CALC_RX_MIC( p, len )
#define CALC_TX_MIC( p, len )
#define CALC_RX_MIC( p, len )
#define CALC_TX_MIC( p, len )
#define MIC_RX_RTN( mic, dw )
#define MIC_TX_RTN( mic, dw )
#define IF_SSN(x)
#define IF_NOT_SSN(x) x
#endif // HCF_TYPE_WPA
#if HCF_TALLIES & HCF_TALLIES_HCF //HCF tally support
#if HCF_TALLIES & HCF_TALLIES_HCF //HCF tally support
#define IF_TALLY(x) x
#else
#define IF_TALLY(x)
......@@ -651,23 +614,23 @@ err: MSF should no longer supply this macro;
#if HCF_DMA
#define IF_DMA(x) x
#define IF_DMA(x) x
#define IF_NOT_DMA(x)
#define IF_USE_DMA(x) if ( ifbp->IFB_CntlOpt & USE_DMA ) x
#define IF_NOT_USE_DMA(x) if ( !(ifbp->IFB_CntlOpt & USE_DMA) ) x
#define IF_USE_DMA(x) if ( ifbp->IFB_CntlOpt & USE_DMA ) x
#define IF_NOT_USE_DMA(x) if ( !(ifbp->IFB_CntlOpt & USE_DMA) ) x
#else
#define IF_DMA(x)
#define IF_NOT_DMA(x) x
#define IF_NOT_DMA(x) x
#define IF_USE_DMA(x)
#define IF_NOT_USE_DMA(x) x
#define IF_NOT_USE_DMA(x) x
#endif // HCF_DMA
#define IPW(x) ((hcf_16)IN_PORT_WORD( ifbp->IFB_IOBase + (x) ) )
#define OPW(x, y) OUT_PORT_WORD( ifbp->IFB_IOBase + (x), y )
/* make sure the implementation of HCF_WAIT_WHILE is such that there may be multiple HCF_WAIT_WHILE calls
* in a row and that when one fails all subsequent fail immediately without reinitialization of prot_cnt
*/
/* make sure the implementation of HCF_WAIT_WHILE is such that there may be multiple HCF_WAIT_WHILE calls
* in a row and that when one fails all subsequent fail immediately without reinitialization of prot_cnt
*/
#if HCF_PROT_TIME == 0
#define PROT_CNT_INI
#define IF_PROT_TIME(x)
......@@ -677,8 +640,8 @@ err: MSF should no longer supply this macro;
#define HCF_WAIT_WHILE( x ) while ( x ) /*NOP*/;
#endif // HCF_YIELD
#else
#define PROT_CNT_INI hcf_32 prot_cnt = ifbp->IFB_TickIni;
#define IF_PROT_TIME(x) x
#define PROT_CNT_INI hcf_32 prot_cnt = ifbp->IFB_TickIni;
#define IF_PROT_TIME(x) x
#if defined HCF_YIELD
#define HCF_WAIT_WHILE( x ) while ( prot_cnt && (x) && (HCF_YIELD) ) prot_cnt--;
#else
......@@ -697,7 +660,7 @@ err: you used an invalid bitmask;
#endif // HCF_EX_INT
#if 0 //get compiler going
#if HCF_EX_INT_TICK != HREG_EV_TICK
#if HCF_EX_INT_TICK != HREG_EV_TICK
;? out dated checking
err: someone redefined these macros while the implemenation assumes they are equal;
#endif
......@@ -724,36 +687,36 @@ err: someone redefined these macros while the implemenation assumes they are equ
#define HCFASSERT(x,q) {if (!(x)) {mdd_assert( ifbp, __LINE__ , q );}}
#define MMDASSERT(x,q) {if (!(x)) {mdd_assert( assert_ifbp, __LINE__ + FILE_NAME_OFFSET, q );}}
#define HCFLOGENTRY( where, what ) \
{if ( (ifbp->IFB_AssertWhere = where) <= 15 ) { \
HCF_ENTRY( ifbp ); \
HCFASSERT( (ifbp->IFB_AssertTrace & 1<<((where)&0xF)) == 0, ifbp->IFB_AssertTrace ); \
ifbp->IFB_AssertTrace |= 1<<((where)&0xF); \
} \
HCFTRACE(ifbp, where ) \
HCFTRACEVALUE(ifbp, what ) \
}
#define HCFLOGEXIT( where ) \
{if ( (ifbp->IFB_AssertWhere = where) <= 15 ) { \
HCF_EXIT( ifbp ); \
ifbp->IFB_AssertTrace &= ~(1<<((where)&0xF)); \
} \
HCFTRACE(ifbp, (where)|HCF_TRACE_EXIT ) \
}
#define HCFLOGENTRY( where, what ) \
{if ( (ifbp->IFB_AssertWhere = where) <= 15 ) { \
HCF_ENTRY( ifbp ); \
HCFASSERT( (ifbp->IFB_AssertTrace & 1<<((where)&0xF)) == 0, ifbp->IFB_AssertTrace ); \
ifbp->IFB_AssertTrace |= 1<<((where)&0xF); \
} \
HCFTRACE(ifbp, where ) \
HCFTRACEVALUE(ifbp, what ) \
}
#define HCFLOGEXIT( where ) \
{if ( (ifbp->IFB_AssertWhere = where) <= 15 ) { \
HCF_EXIT( ifbp ); \
ifbp->IFB_AssertTrace &= ~(1<<((where)&0xF)); \
} \
HCFTRACE(ifbp, (where)|HCF_TRACE_EXIT ) \
}
#else // HCF_ASSERT
#define HCFASSERT( x, q )
#define MMDASSERT( x, q )
#define HCFLOGENTRY( where, what ) {HCF_ENTRY( ifbp );}
#define HCFLOGEXIT( where ) {HCF_EXIT( ifbp );}
#define HCFLOGENTRY( where, what ) {HCF_ENTRY( ifbp );}
#define HCFLOGEXIT( where ) {HCF_EXIT( ifbp );}
#endif // HCF_ASSERT
#if HCF_INT_ON
/* ;? HCFASSERT_INT
* #if (HCF_SLEEP) & HCF_DDS
* #define HCFASSERT_INT HCFASSERT( ifbp->IFB_IntOffCnt != 0xFFFF && ifbp->IFB_IntOffCnt != 0xFFFE, \
* ifbp->IFB_IntOffCnt )
* ifbp->IFB_IntOffCnt )
* #else
*/
#define HCFASSERT_INT HCFASSERT( ifbp->IFB_IntOffCnt != 0xFFFF, ifbp->IFB_IntOffCnt )
......@@ -764,8 +727,8 @@ HCFTRACE(ifbp, (where)|HCF_TRACE_EXIT ) \
#if defined HCF_TRACE
#define HCFTRACE(ifbp, where ) {OPW( HREG_SW_1, where );}
//#define HCFTRACE(ifbp, where ) {HCFASSERT( DO_ASSERT, where );}
#define HCFTRACE(ifbp, where ) {OPW( HREG_SW_1, where );}
//#define HCFTRACE(ifbp, where ) {HCFASSERT( DO_ASSERT, where );}
#define HCFTRACEVALUE(ifbp, what ) {OPW( HREG_SW_2, what );}
//#define HCFTRACEVALUE(ifbp, what ) {HCFASSERT( DO_ASSERT, what );}
#else
......@@ -775,7 +738,7 @@ HCFTRACE(ifbp, (where)|HCF_TRACE_EXIT ) \
#if HCF_BIG_ENDIAN
#define BE_PAR(x) ,x
#define BE_PAR(x) ,x
#else
#define BE_PAR(x)
#endif // HCF_BIG_ENDIAN
......@@ -789,13 +752,13 @@ HCFTRACE(ifbp, (where)|HCF_TRACE_EXIT ) \
/************************************************************************************************/
#if HCF_ASSERT
extern IFBP BASED assert_ifbp; //to make asserts easily work under MMD and DHF
EXTERN_C void mdd_assert (IFBP ifbp, unsigned int line_number, hcf_32 q );
extern IFBP BASED assert_ifbp; //to make asserts easily work under MMD and DHF
EXTERN_C void mdd_assert (IFBP ifbp, unsigned int line_number, hcf_32 q );
#endif //HCF_ASSERT
#if ! ( (HCF_IO) & HCF_IO_32BITS ) // defined 16 bits only
#if ! ( (HCF_IO) & HCF_IO_32BITS ) // defined 16 bits only
#undef OUT_PORT_STRING_32
#undef IN_PORT_STRING_32
#endif // HCF_IO
#endif //HCFDEFC_H
#endif //HCFDEFC_H
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7