Commit fea0fe60 authored by Jeffy Chen's avatar Jeffy Chen Committed by Linus Walleij

pinctrl: rockchip: add support for the rk3228

The pinctrl of rk3228 is much the same as rk3288's, but
without pmu.
Signed-off-by: default avatarJeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: default avatarHeiko Stuebner <heiko@sntech.de>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent e87623cb
......@@ -21,7 +21,8 @@ defined as gpio sub-nodes of the pinmux controller.
Required properties for iomux controller:
- compatible: one of "rockchip,rk2928-pinctrl", "rockchip,rk3066a-pinctrl"
"rockchip,rk3066b-pinctrl", "rockchip,rk3188-pinctrl"
"rockchip,rk3288-pinctrl", "rockchip,rk3368-pinctrl"
"rockchip,rk3228-pinctrl", "rockchip,rk3288-pinctrl"
"rockchip,rk3368-pinctrl"
- rockchip,grf: phandle referencing a syscon providing the
"general register files"
......
......@@ -614,6 +614,40 @@ static void rk3288_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
}
}
#define RK3228_PULL_OFFSET 0x100
static void rk3228_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
*regmap = info->regmap_base;
*reg = RK3228_PULL_OFFSET;
*reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
*bit = (pin_num % RK3188_PULL_PINS_PER_REG);
*bit *= RK3188_PULL_BITS_PER_PIN;
}
#define RK3228_DRV_GRF_OFFSET 0x200
static void rk3228_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl *info = bank->drvdata;
*regmap = info->regmap_base;
*reg = RK3228_DRV_GRF_OFFSET;
*reg += bank->bank_num * RK3288_DRV_BANK_STRIDE;
*reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4);
*bit = (pin_num % RK3288_DRV_PINS_PER_REG);
*bit *= RK3288_DRV_BITS_PER_PIN;
}
#define RK3368_PULL_GRF_OFFSET 0x100
#define RK3368_PULL_PMU_OFFSET 0x10
......@@ -2143,6 +2177,23 @@ static struct rockchip_pin_ctrl rk3188_pin_ctrl = {
.pull_calc_reg = rk3188_calc_pull_reg_and_bit,
};
static struct rockchip_pin_bank rk3228_pin_banks[] = {
PIN_BANK(0, 32, "gpio0"),
PIN_BANK(1, 32, "gpio1"),
PIN_BANK(2, 32, "gpio2"),
PIN_BANK(3, 32, "gpio3"),
};
static struct rockchip_pin_ctrl rk3228_pin_ctrl = {
.pin_banks = rk3228_pin_banks,
.nr_banks = ARRAY_SIZE(rk3228_pin_banks),
.label = "RK3228-GPIO",
.type = RK3288,
.grf_mux_offset = 0x0,
.pull_calc_reg = rk3228_calc_pull_reg_and_bit,
.drv_calc_reg = rk3228_calc_drv_reg_and_bit,
};
static struct rockchip_pin_bank rk3288_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(0, 24, "gpio0", IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
......@@ -2220,6 +2271,8 @@ static const struct of_device_id rockchip_pinctrl_dt_match[] = {
.data = (void *)&rk3066b_pin_ctrl },
{ .compatible = "rockchip,rk3188-pinctrl",
.data = (void *)&rk3188_pin_ctrl },
{ .compatible = "rockchip,rk3228-pinctrl",
.data = (void *)&rk3228_pin_ctrl },
{ .compatible = "rockchip,rk3288-pinctrl",
.data = (void *)&rk3288_pin_ctrl },
{ .compatible = "rockchip,rk3368-pinctrl",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment