Merge bk://bk.arm.linux.org.uk/linux-2.6-pcmcia

into ppc970.osdl.org:/home/torvalds/v2.6/linux

drivers/pcmcia/pxa2xx_base.c

@@ -22,7 +22,6 @@
 #include <linux/cpufreq.h>
 #include <linux/ioport.h>
 #include <linux/kernel.h>
-#include <linux/notifier.h>
 #include <linux/spinlock.h>
 
 #include <asm/hardware.h>
@@ -133,6 +132,39 @@ static int pxa2xx_pcmcia_set_timing(struct soc_pcmcia_socket *skt)
 	return pxa2xx_pcmcia_set_mcxx(skt, clk);
 }
 
+#ifdef CONFIG_CPU_FREQ
+
+static int
+pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
+			       unsigned long val,
+			       struct cpufreq_freqs *freqs)
+{
+#warning "it's not clear if this is right since the core CPU (N) clock has no effect on the memory (L) clock"
+	switch (val) {
+	case CPUFREQ_PRECHANGE:
+		if (freqs->new > freqs->old) {
+			debug(skt, 2, "new frequency %u.%uMHz > %u.%uMHz, "
+			       "pre-updating\n",
+			       freqs->new / 1000, (freqs->new / 100) % 10,
+			       freqs->old / 1000, (freqs->old / 100) % 10);
+			pxa2xx_pcmcia_set_mcxx(skt, freqs->new);
+		}
+		break;
+
+	case CPUFREQ_POSTCHANGE:
+		if (freqs->new < freqs->old) {
+			debug(skt, 2, "new frequency %u.%uMHz < %u.%uMHz, "
+			       "post-updating\n",
+			       freqs->new / 1000, (freqs->new / 100) % 10,
+			       freqs->old / 1000, (freqs->old / 100) % 10);
+			pxa2xx_pcmcia_set_mcxx(skt, freqs->new);
+		}
+		break;
+	}
+	return 0;
+}
+#endif
+
 int pxa2xx_drv_pcmcia_probe(struct device *dev)
 {
 	int ret;
@@ -181,6 +213,9 @@ int pxa2xx_drv_pcmcia_probe(struct device *dev)
 
 	/* Provide our PXA2xx specific timing routines. */
 	ops->set_timing  = pxa2xx_pcmcia_set_timing;
+#ifdef CONFIG_CPU_FREQ
+	ops->frequency_change = pxa2xx_pcmcia_frequency_change;
+#endif
 
 	ret = soc_common_drv_pcmcia_probe(dev, ops, first, nr);
 
@@ -227,101 +262,13 @@ static struct device_driver pxa2xx_pcmcia_driver = {
 	.bus		= &platform_bus_type,
 };
 
-#ifdef CONFIG_CPU_FREQ
-
-/*
- * When pxa2xx_pcmcia_notifier() decides that a MC{IO,MEM,ATT} adjustment (due
- * to a core clock frequency change) is needed, this routine establishes
- * new values consistent with the clock speed `clock'.
- */
-static void pxa2xx_pcmcia_update_mcxx(unsigned int clock)
-{
-	struct soc_pcmcia_socket *skt;
-
-	down(&soc_sockets_lock);
-	list_for_each_entry(skt, &soc_sockets, node) {
-		pxa2xx_pcmcia_set_mcxx(skt, clock);
-	}
-	up(&soc_sockets_lock);
-}
-
-/*
- * When changing the processor L clock frequency, it is necessary
- * to adjust the MCXX timings accordingly. We've recorded the timings
- * requested by Card Services, so this is just a matter of finding
- * out what our current speed is, and then recomputing the new MCXX
- * values.
- *
- * Returns: 0 on success, -1 on error
- */
-static int
-pxa2xx_pcmcia_notifier(struct notifier_block *nb, unsigned long val, void *data)
-{
-	struct cpufreq_freqs *freqs = data;
-
-#warning "it's not clear if this is right since the core CPU (N) clock has no effect on the memory (L) clock"
-	switch (val) {
-		case CPUFREQ_PRECHANGE:
-			if (freqs->new > freqs->old) {
-				debug( 2, "new frequency %u.%uMHz > %u.%uMHz, "
-						"pre-updating\n",
-						freqs->new / 1000, (freqs->new / 100) % 10,
-						freqs->old / 1000, (freqs->old / 100) % 10);
-				pxa2xx_pcmcia_update_mcxx(freqs->new);
-			}
-			break;
-
-		case CPUFREQ_POSTCHANGE:
-			if (freqs->new < freqs->old) {
-				debug( 2, "new frequency %u.%uMHz < %u.%uMHz, "
-						"post-updating\n",
-						freqs->new / 1000, (freqs->new / 100) % 10,
-						freqs->old / 1000, (freqs->old / 100) % 10);
-				pxa2xx_pcmcia_update_mcxx(freqs->new);
-			}
-			break;
-	}
-
-	return 0;
-}
-
-static struct notifier_block pxa2xx_pcmcia_notifier_block = {
-	.notifier_call	= pxa2xx_pcmcia_notifier
-};
-
-static int __init pxa2xx_pcmcia_cpufreq_init(void)
-{
-	int ret;
-
-	ret = cpufreq_register_notifier(&pxa2xx_pcmcia_notifier_block,
-					CPUFREQ_TRANSITION_NOTIFIER);
-	if (ret < 0)
-		printk(KERN_ERR "Unable to register CPU frequency change "
-				"notifier for PCMCIA (%d)\n", ret);
-	return ret;
-}
-
-static void __exit pxa2xx_pcmcia_cpufreq_exit(void)
-{
-	cpufreq_unregister_notifier(&pxa2xx_pcmcia_notifier_block, CPUFREQ_TRANSITION_NOTIFIER);
-}
-
-#else
-#define pxa2xx_pcmcia_cpufreq_init()
-#define pxa2xx_pcmcia_cpufreq_exit()
-#endif
-
 static int __init pxa2xx_pcmcia_init(void)
 {
-	int ret = driver_register(&pxa2xx_pcmcia_driver);
-	if (ret == 0)
-		pxa2xx_pcmcia_cpufreq_init();
-	return ret;
+	return driver_register(&pxa2xx_pcmcia_driver);
 }
 
 static void __exit pxa2xx_pcmcia_exit(void)
 {
-	pxa2xx_pcmcia_cpufreq_exit();
 	driver_unregister(&pxa2xx_pcmcia_driver);
 }
 

drivers/pcmcia/sa11xx_base.c

@@ -36,7 +36,6 @@
 #include <linux/cpufreq.h>
 #include <linux/ioport.h>
 #include <linux/kernel.h>
-#include <linux/notifier.h>
 #include <linux/spinlock.h>
 
 #include <asm/hardware.h>
@@ -111,6 +110,32 @@ sa1100_pcmcia_set_mecr(struct soc_pcmcia_socket *skt, unsigned int cpu_clock)
 	return 0;
 }
 
+#ifdef CONFIG_CPU_FREQ
+static int
+sa1100_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
+			       unsigned long val,
+			       struct cpufreq_freqs *freqs)
+{
+	switch (val) {
+	case CPUFREQ_PRECHANGE:
+		if (freqs->new > freqs->old)
+			sa1100_pcmcia_set_mecr(skt, freqs->new);
+		break;
+
+	case CPUFREQ_POSTCHANGE:
+		if (freqs->new < freqs->old)
+			sa1100_pcmcia_set_mecr(skt, freqs->new);
+		break;
+	case CPUFREQ_RESUMECHANGE:
+		sa1100_pcmcia_set_mecr(skt, freqs->new);
+		break;
+	}
+
+	return 0;
+}
+
+#endif
+
 static int
 sa1100_pcmcia_set_timing(struct soc_pcmcia_socket *skt)
 {
@@ -152,90 +177,23 @@ int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
 	/* Provide our SA11x0 specific timing routines. */
 	ops->set_timing  = sa1100_pcmcia_set_timing;
 	ops->show_timing = sa1100_pcmcia_show_timing;
+#ifdef CONFIG_CPU_FREQ
+	ops->frequency_change = sa1100_pcmcia_frequency_change;
+#endif
 
 	return soc_common_drv_pcmcia_probe(dev, ops, first, nr);
 }
 EXPORT_SYMBOL(sa11xx_drv_pcmcia_probe);
 
-#ifdef CONFIG_CPU_FREQ
-
-/* sa1100_pcmcia_update_mecr()
- * ^^^^^^^^^^^^^^^^^^^^^^^^^^^
- * When sa1100_pcmcia_notifier() decides that a MECR adjustment (due
- * to a core clock frequency change) is needed, this routine establishes
- * new BS_xx values consistent with the clock speed `clock'.
- */
-static void sa1100_pcmcia_update_mecr(unsigned int clock)
-{
-	struct soc_pcmcia_socket *skt;
-
-	down(&soc_pcmcia_sockets_lock);
-	list_for_each_entry(skt, &soc_pcmcia_sockets, node)
-		sa1100_pcmcia_set_mecr(skt, clock);
-	up(&soc_pcmcia_sockets_lock);
-}
-
-/* sa1100_pcmcia_notifier()
- * ^^^^^^^^^^^^^^^^^^^^^^^^
- * When changing the processor core clock frequency, it is necessary
- * to adjust the MECR timings accordingly. We've recorded the timings
- * requested by Card Services, so this is just a matter of finding
- * out what our current speed is, and then recomputing the new MECR
- * values.
- *
- * Returns: 0 on success, -1 on error
- */
-static int
-sa1100_pcmcia_notifier(struct notifier_block *nb, unsigned long val,
-		       void *data)
-{
-	struct cpufreq_freqs *freqs = data;
-
-	switch (val) {
-	case CPUFREQ_PRECHANGE:
-		if (freqs->new > freqs->old)
-			sa1100_pcmcia_update_mecr(freqs->new);
-		break;
-
-	case CPUFREQ_POSTCHANGE:
-		if (freqs->new < freqs->old)
-			sa1100_pcmcia_update_mecr(freqs->new);
-		break;
-	case CPUFREQ_RESUMECHANGE:
-		sa1100_pcmcia_update_mecr(freqs->new);
-		break;
-	}
-
-	return 0;
-}
-
-static struct notifier_block sa1100_pcmcia_notifier_block = {
-	.notifier_call	= sa1100_pcmcia_notifier
-};
-
 static int __init sa11xx_pcmcia_init(void)
 {
-	int ret;
-
-	printk(KERN_INFO "SA11xx PCMCIA\n");
-
-	ret = cpufreq_register_notifier(&sa1100_pcmcia_notifier_block,
-					CPUFREQ_TRANSITION_NOTIFIER);
-	if (ret < 0)
-		printk(KERN_ERR "Unable to register CPU frequency change "
-			"notifier (%d)\n", ret);
-
-	return ret;
+	return 0;
 }
 module_init(sa11xx_pcmcia_init);
 
-static void __exit sa11xx_pcmcia_exit(void)
-{
-	cpufreq_unregister_notifier(&sa1100_pcmcia_notifier_block, CPUFREQ_TRANSITION_NOTIFIER);
-}
+static void __exit sa11xx_pcmcia_exit(void) {}
 
 module_exit(sa11xx_pcmcia_exit);
-#endif
 
 MODULE_AUTHOR("John Dorsey <john+@cs.cmu.edu>");
 MODULE_DESCRIPTION("Linux PCMCIA Card Services: SA-11xx core socket driver");

drivers/pcmcia/soc_common.c

@@ -31,6 +31,7 @@
 ======================================================================*/
 
 
+#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/init.h>
@@ -39,6 +40,7 @@
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
+#include <linux/cpufreq.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
@@ -614,6 +616,49 @@ struct skt_dev_info {
 #define SKT_DEV_INFO_SIZE(n) \
 	(sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket))
 
+#ifdef CONFIG_CPU_FREQ
+static int
+soc_pcmcia_notifier(struct notifier_block *nb, unsigned long val, void *data)
+{
+	struct soc_pcmcia_socket *skt;
+	struct cpufreq_freqs *freqs = data;
+	int ret = 0;
+
+	down(&soc_pcmcia_sockets_lock);
+	list_for_each_entry(skt, &soc_pcmcia_sockets, node)
+		if ( skt->ops->frequency_change )
+			ret += skt->ops->frequency_change(skt, val, freqs);
+	up(&soc_pcmcia_sockets_lock);
+
+	return ret;
+}
+
+static struct notifier_block soc_pcmcia_notifier_block = {
+	.notifier_call	= soc_pcmcia_notifier
+};
+
+static int soc_pcmcia_cpufreq_register(void)
+{
+	int ret;
+
+	ret = cpufreq_register_notifier(&soc_pcmcia_notifier_block,
+					CPUFREQ_TRANSITION_NOTIFIER);
+	if (ret < 0)
+		printk(KERN_ERR "Unable to register CPU frequency change "
+				"notifier for PCMCIA (%d)\n", ret);
+	return ret;
+}
+
+static void soc_pcmcia_cpufreq_unregister(void)
+{
+	cpufreq_unregister_notifier(&soc_pcmcia_notifier_block, CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+#define soc_pcmcia_cpufreq_register()
+#define soc_pcmcia_cpufreq_unregister()
+#endif
+
 int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr)
 {
 	struct skt_dev_info *sinfo;
@@ -692,6 +737,9 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops
 			goto out_err_5;
 		}
 
+		if ( list_empty(&soc_pcmcia_sockets) )
+			soc_pcmcia_cpufreq_register();
+
 		list_add(&skt->node, &soc_pcmcia_sockets);
 
 		/*
@@ -789,6 +837,9 @@ int soc_common_drv_pcmcia_remove(struct device *dev)
 		release_resource(&skt->res_io);
 		release_resource(&skt->res_skt);
 	}
+	if ( list_empty(&soc_pcmcia_sockets) )
+		soc_pcmcia_cpufreq_unregister();
+
 	up(&soc_pcmcia_sockets_lock);
 
 	kfree(sinfo);

drivers/pcmcia/soc_common.h

@@ -10,6 +10,7 @@
 #define _ASM_ARCH_PCMCIA
 
 /* include the world */
+#include <linux/cpufreq.h>
 #include <pcmcia/version.h>
 #include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
@@ -103,6 +104,13 @@ struct pcmcia_low_level {
 	unsigned int (*get_timing)(struct soc_pcmcia_socket *, unsigned int, unsigned int);
 	int (*set_timing)(struct soc_pcmcia_socket *);
 	int (*show_timing)(struct soc_pcmcia_socket *, char *);
+
+#ifdef CONFIG_CPU_FREQ
+	/*
+	 * CPUFREQ support.
+	 */
+	int (*frequency_change)(struct soc_pcmcia_socket *, unsigned long, struct cpufreq_freqs *);
+#endif
 };