Merge tag 'fixes-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull ARM SoC low-priority fixes from Olof Johansson:
 "A small selection of fixes coming in late during the release cycle and
  not being critical enough for 3.15 inclusion"

* tag 'fixes-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: shmobile: armadillo800eva: fixup HDMI sound flags setting
  ARM: msm: Silence readb/writeb warnings due to missing IOMEM()
  ARM: dts: am43xx: fix starting offset of NAND.filesystem MTD partition
  ARM: dts: am335x-boneblack: remove use of ti,vcc-aux-disable-is-sleep
  ARM: OMAP2+: free use_gptimer_clksrc variable after boot
  ARM: OMAP5: Redo THUMB mode switch on secondary CPU
  ARM: dts: AM4372: add l3-noc information
  ARM: dts: DRA7: Use dra7-l3-noc instead of omap4-l3-noc
  reset: Add of_reset_control_get to reset.h

arch/arm/boot/dts/am335x-boneblack.dts

@@ -26,7 +26,6 @@ &mmc2 {
 	pinctrl-0 = <&emmc_pins>;
 	bus-width = <8>;
 	status = "okay";
-	ti,vcc-aux-disable-is-sleep;
 };
 
 &am33xx_pinmux {

arch/arm/boot/dts/am4372.dtsi

@@ -67,11 +67,15 @@ am43xx_pinmux: pinmux@44e10800 {
 	};
 
 	ocp {
-		compatible = "simple-bus";
+		compatible = "ti,am4372-l3-noc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 		ti,hwmods = "l3_main";
+		reg = <0x44000000 0x400000
+		       0x44800000 0x400000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
 		prcm: prcm@44df0000 {
 			compatible = "ti,am4-prcm";

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -341,7 +341,7 @@ partition@8 {
 		};
 		partition@9 {
 			label = "NAND.file-system";
-			reg = <0x00800000 0x1F600000>;
+			reg = <0x00a00000 0x1f600000>;
 		};
 	};
 };

arch/arm/boot/dts/dra7.dtsi

@@ -99,13 +99,13 @@ mpu {
 	 * hierarchy.
 	 */
 	ocp {
-		compatible = "ti,omap4-l3-noc", "simple-bus";
+		compatible = "ti,dra7-l3-noc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 		ti,hwmods = "l3_main_1", "l3_main_2";
-		reg = <0x44000000 0x2000>,
-		      <0x44800000 0x3000>;
+		reg = <0x44000000 0x1000000>,
+		      <0x45000000 0x1000>;
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 

arch/arm/mach-msm/board-trout-gpio.c

@@ -89,7 +89,7 @@ static int trout_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 			.base		  = base_gpio,			\
 			.ngpio		  = 8,				\
 		},							\
-		.reg = (void *) reg_num + TROUT_CPLD_BASE,		\
+		.reg = reg_num + TROUT_CPLD_BASE,			\
 		.shadow = shadow_val,					\
 	}
 

arch/arm/mach-msm/board-trout.c

@@ -78,7 +78,7 @@ static void __init trout_init(void)
 
 static struct map_desc trout_io_desc[] __initdata = {
 	{
-		.virtual = TROUT_CPLD_BASE,
+		.virtual = (unsigned long)TROUT_CPLD_BASE,
 		.pfn     = __phys_to_pfn(TROUT_CPLD_START),
 		.length  = TROUT_CPLD_SIZE,
 		.type    = MT_DEVICE_NONSHARED

arch/arm/mach-msm/board-trout.h

@@ -58,7 +58,7 @@
 #define TROUT_4_TP_LS_EN    19
 #define TROUT_5_TP_LS_EN    1
 
-#define TROUT_CPLD_BASE   0xE8100000
+#define TROUT_CPLD_BASE   IOMEM(0xE8100000)
 #define TROUT_CPLD_START  0x98000000
 #define TROUT_CPLD_SIZE   SZ_4K
 

arch/arm/mach-omap2/omap-headsmp.S

@@ -31,10 +31,6 @@
  * register AuxCoreBoot0.
  */
 ENTRY(omap5_secondary_startup)
-.arm
-THUMB( adr     r9, BSYM(wait)  )       @ CPU may be entered in ARM mode.
-THUMB( bx      r9              )       @ If this is a Thumb-2 kernel,
-THUMB( .thumb                  )       @ switch to Thumb now.
 wait:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
 	ldr	r0, [r2]
 	mov	r0, r0, lsr #5
@@ -43,7 +39,7 @@ wait:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
 	cmp	r0, r4
 	bne	wait
 	b	secondary_startup
-END(omap5_secondary_startup)
+ENDPROC(omap5_secondary_startup)
 /*
  * OMAP4 specific entry point for secondary CPU to jump from ROM
  * code.  This routine also provides a holding flag into which

arch/arm/mach-omap2/timer.c

@@ -361,7 +361,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
 
 /* Clocksource code */
 static struct omap_dm_timer clksrc;
-static bool use_gptimer_clksrc;
+static bool use_gptimer_clksrc __initdata;
 
 /*
  * clocksource

arch/arm/mach-shmobile/board-armadillo800eva.c

@@ -1017,7 +1017,7 @@ static struct asoc_simple_card_info fsi2_hdmi_info = {
 	.platform	= "sh_fsi2",
 	.cpu_dai = {
 		.name	= "fsib-dai",
-		.fmt	= SND_SOC_DAIFMT_CBM_CFM,
+		.fmt	= SND_SOC_DAIFMT_CBS_CFS,
 	},
 	.codec_dai = {
 		.name = "sh_mobile_hdmi-hifi",

include/linux/reset.h

@@ -2,6 +2,7 @@
 #define _LINUX_RESET_H_
 
 struct device;
+struct device_node;
 struct reset_control;
 
 #ifdef CONFIG_RESET_CONTROLLER
@@ -33,6 +34,9 @@ static inline struct reset_control *devm_reset_control_get_optional(
 	return devm_reset_control_get(dev, id);
 }
 
+struct reset_control *of_reset_control_get(struct device_node *node,
+					   const char *id);
+
 #else
 
 static inline int reset_control_reset(struct reset_control *rstc)
@@ -75,6 +79,12 @@ static inline struct reset_control *devm_reset_control_get_optional(
 	return ERR_PTR(-ENOSYS);
 }
 
+static inline struct reset_control *of_reset_control_get(
+				struct device_node *node, const char *id)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
 #endif /* CONFIG_RESET_CONTROLLER */
 
 #endif