Commit ffa3a37a authored by Michael Turquette's avatar Michael Turquette

Merge tag 'ib-mfd-regulator-clk-v3.19' of...

Merge tag 'ib-mfd-regulator-clk-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into clk-next

Immutable branch between MFD, Regulator and Clk, due for v3.19
parents b572b5f8 159a5e92
* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator
* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator
The Samsung S2MPS11 is a multi-function device which includes voltage and
current regulators, RTC, charger controller and other sub-blocks. It is
......@@ -7,8 +7,8 @@ interfaced to the host controller using an I2C interface. Each sub-block is
addressed by the host system using different I2C slave addresses.
Required properties:
- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic"
or "samsung,s2mpu02-pmic".
- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic"
or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic".
- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
Optional properties:
......@@ -17,8 +17,8 @@ Optional properties:
- interrupts: Interrupt specifiers for interrupt sources.
Optional nodes:
- clocks: s2mps11 and s5m8767 provide three(AP/CP/BT) buffered 32.768 KHz
outputs, so to register these as clocks with common clock framework
- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768
KHz outputs, so to register these as clocks with common clock framework
instantiate a sub-node named "clocks". It uses the common clock binding
documented in :
[Documentation/devicetree/bindings/clock/clock-bindings.txt]
......@@ -30,12 +30,12 @@ Optional nodes:
the clock which they consume.
Clock ID Devices
----------------------------------------------------------
32KhzAP 0 S2MPS11, S2MPS14, S5M8767
32KhzCP 1 S2MPS11, S5M8767
32KhzBT 2 S2MPS11, S2MPS14, S5M8767
32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S5M8767
32KhzCP 1 S2MPS11, S2MPS13, S5M8767
32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S5M8767
- compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps14-clk",
"samsung,s5m8767-clk"
- compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
"samsung,s2mps14-clk", "samsung,s5m8767-clk"
- regulators: The regulators of s2mps11 that have to be instantiated should be
included in a sub-node named 'regulators'. Regulator nodes included in this
......@@ -81,12 +81,14 @@ as per the datasheet of s2mps11.
- LDOn
- valid values for n are:
- S2MPS11: 1 to 38
- S2MPS13: 1 to 40
- S2MPS14: 1 to 25
- S2MPU02: 1 to 28
- Example: LDO1, LDO2, LDO28
- BUCKn
- valid values for n are:
- S2MPS11: 1 to 10
- S2MPS13: 1 to 10
- S2MPS14: 1 to 5
- S2MPU02: 1 to 7
- Example: BUCK1, BUCK2, BUCK9
......
......@@ -23,6 +23,7 @@
#include <linux/clk-provider.h>
#include <linux/platform_device.h>
#include <linux/mfd/samsung/s2mps11.h>
#include <linux/mfd/samsung/s2mps13.h>
#include <linux/mfd/samsung/s2mps14.h>
#include <linux/mfd/samsung/s5m8767.h>
#include <linux/mfd/samsung/core.h>
......@@ -120,6 +121,24 @@ static struct clk_init_data s2mps11_clks_init[S2MPS11_CLKS_NUM] = {
},
};
static struct clk_init_data s2mps13_clks_init[S2MPS11_CLKS_NUM] = {
[S2MPS11_CLK_AP] = {
.name = "s2mps13_ap",
.ops = &s2mps11_clk_ops,
.flags = CLK_IS_ROOT,
},
[S2MPS11_CLK_CP] = {
.name = "s2mps13_cp",
.ops = &s2mps11_clk_ops,
.flags = CLK_IS_ROOT,
},
[S2MPS11_CLK_BT] = {
.name = "s2mps13_bt",
.ops = &s2mps11_clk_ops,
.flags = CLK_IS_ROOT,
},
};
static struct clk_init_data s2mps14_clks_init[S2MPS11_CLKS_NUM] = {
[S2MPS11_CLK_AP] = {
.name = "s2mps14_ap",
......@@ -184,6 +203,10 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
s2mps11_reg = S2MPS11_REG_RTC_CTRL;
clks_init = s2mps11_clks_init;
break;
case S2MPS13X:
s2mps11_reg = S2MPS13_REG_RTCCTRL;
clks_init = s2mps13_clks_init;
break;
case S2MPS14X:
s2mps11_reg = S2MPS14_REG_RTCCTRL;
clks_init = s2mps14_clks_init;
......@@ -279,6 +302,7 @@ static int s2mps11_clk_remove(struct platform_device *pdev)
static const struct platform_device_id s2mps11_clk_id[] = {
{ "s2mps11-clk", S2MPS11X},
{ "s2mps13-clk", S2MPS13X},
{ "s2mps14-clk", S2MPS14X},
{ "s5m8767-clk", S5M8767X},
{ },
......
......@@ -27,6 +27,7 @@
#include <linux/mfd/samsung/irq.h>
#include <linux/mfd/samsung/s2mpa01.h>
#include <linux/mfd/samsung/s2mps11.h>
#include <linux/mfd/samsung/s2mps13.h>
#include <linux/mfd/samsung/s2mps14.h>
#include <linux/mfd/samsung/s2mpu02.h>
#include <linux/mfd/samsung/s5m8763.h>
......@@ -74,6 +75,15 @@ static const struct mfd_cell s2mps11_devs[] = {
}
};
static const struct mfd_cell s2mps13_devs[] = {
{ .name = "s2mps13-pmic", },
{ .name = "s2mps13-rtc", },
{
.name = "s2mps13-clk",
.of_compatible = "samsung,s2mps13-clk",
},
};
static const struct mfd_cell s2mps14_devs[] = {
{
.name = "s2mps14-pmic",
......@@ -107,6 +117,9 @@ static const struct of_device_id sec_dt_match[] = {
}, {
.compatible = "samsung,s2mps11-pmic",
.data = (void *)S2MPS11X,
}, {
.compatible = "samsung,s2mps13-pmic",
.data = (void *)S2MPS13X,
}, {
.compatible = "samsung,s2mps14-pmic",
.data = (void *)S2MPS14X,
......@@ -194,6 +207,15 @@ static const struct regmap_config s2mps11_regmap_config = {
.cache_type = REGCACHE_FLAT,
};
static const struct regmap_config s2mps13_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = S2MPS13_REG_LDODSCH5,
.volatile_reg = s2mps11_volatile,
.cache_type = REGCACHE_FLAT,
};
static const struct regmap_config s2mps14_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
......@@ -325,6 +347,9 @@ static int sec_pmic_probe(struct i2c_client *i2c,
case S2MPS11X:
regmap = &s2mps11_regmap_config;
break;
case S2MPS13X:
regmap = &s2mps13_regmap_config;
break;
case S2MPS14X:
regmap = &s2mps14_regmap_config;
break;
......@@ -378,6 +403,10 @@ static int sec_pmic_probe(struct i2c_client *i2c,
sec_devs = s2mps11_devs;
num_sec_devs = ARRAY_SIZE(s2mps11_devs);
break;
case S2MPS13X:
sec_devs = s2mps13_devs;
num_sec_devs = ARRAY_SIZE(s2mps13_devs);
break;
case S2MPS14X:
sec_devs = s2mps14_devs;
num_sec_devs = ARRAY_SIZE(s2mps14_devs);
......
......@@ -389,14 +389,22 @@ static const struct regmap_irq_chip s2mps11_irq_chip = {
.ack_base = S2MPS11_REG_INT1,
};
#define S2MPS1X_IRQ_CHIP_COMMON_DATA \
.irqs = s2mps14_irqs, \
.num_irqs = ARRAY_SIZE(s2mps14_irqs), \
.num_regs = 3, \
.status_base = S2MPS14_REG_INT1, \
.mask_base = S2MPS14_REG_INT1M, \
.ack_base = S2MPS14_REG_INT1 \
static const struct regmap_irq_chip s2mps13_irq_chip = {
.name = "s2mps13",
S2MPS1X_IRQ_CHIP_COMMON_DATA,
};
static const struct regmap_irq_chip s2mps14_irq_chip = {
.name = "s2mps14",
.irqs = s2mps14_irqs,
.num_irqs = ARRAY_SIZE(s2mps14_irqs),
.num_regs = 3,
.status_base = S2MPS14_REG_INT1,
.mask_base = S2MPS14_REG_INT1M,
.ack_base = S2MPS14_REG_INT1,
S2MPS1X_IRQ_CHIP_COMMON_DATA,
};
static const struct regmap_irq_chip s2mpu02_irq_chip = {
......@@ -452,6 +460,9 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
case S2MPS11X:
sec_irq_chip = &s2mps11_irq_chip;
break;
case S2MPS13X:
sec_irq_chip = &s2mps13_irq_chip;
break;
case S2MPS14X:
sec_irq_chip = &s2mps14_irq_chip;
break;
......
......@@ -529,13 +529,13 @@ config REGULATOR_S2MPA01
via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
config REGULATOR_S2MPS11
tristate "Samsung S2MPS11/S2MPS14/S2MPU02 voltage regulator"
tristate "Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage regulator"
depends on MFD_SEC_CORE
help
This driver supports a Samsung S2MPS11/S2MPS14/S2MPU02 voltage output
regulator via I2C bus. The chip is comprised of high efficient Buck
converters including Dual-Phase Buck converter, Buck-Boost converter,
various LDOs.
This driver supports a Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage
output regulator via I2C bus. The chip is comprised of high efficient
Buck converters including Dual-Phase Buck converter, Buck-Boost
converter, various LDOs.
config REGULATOR_S5M8767
tristate "Samsung S5M8767A voltage regulator"
......
......@@ -30,6 +30,7 @@
#include <linux/of_gpio.h>
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/s2mps11.h>
#include <linux/mfd/samsung/s2mps13.h>
#include <linux/mfd/samsung/s2mps14.h>
#include <linux/mfd/samsung/s2mpu02.h>
......@@ -45,10 +46,10 @@ struct s2mps11_info {
enum sec_device_type dev_type;
/*
* One bit for each S2MPS14/S2MPU02 regulator whether the suspend mode
* was enabled.
* One bit for each S2MPS13/S2MPS14/S2MPU02 regulator whether
* the suspend mode was enabled.
*/
unsigned long long s2mps14_suspend_state:35;
unsigned long long s2mps14_suspend_state:50;
/* Array of size rdev_num with GPIO-s for external sleep control */
int *ext_control_gpio;
......@@ -369,12 +370,101 @@ static const struct regulator_desc s2mps11_regulators[] = {
regulator_desc_s2mps11_buck6_10(10, MIN_750_MV, STEP_12_5_MV),
};
static struct regulator_ops s2mps14_reg_ops;
#define regulator_desc_s2mps13_ldo(num, min, step, min_sel) { \
.name = "LDO"#num, \
.id = S2MPS13_LDO##num, \
.ops = &s2mps14_reg_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = min, \
.uV_step = step, \
.linear_min_sel = min_sel, \
.n_voltages = S2MPS14_LDO_N_VOLTAGES, \
.vsel_reg = S2MPS13_REG_L1CTRL + num - 1, \
.vsel_mask = S2MPS14_LDO_VSEL_MASK, \
.enable_reg = S2MPS13_REG_L1CTRL + num - 1, \
.enable_mask = S2MPS14_ENABLE_MASK \
}
#define regulator_desc_s2mps13_buck(num, min, step, min_sel) { \
.name = "BUCK"#num, \
.id = S2MPS13_BUCK##num, \
.ops = &s2mps14_reg_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = min, \
.uV_step = step, \
.linear_min_sel = min_sel, \
.n_voltages = S2MPS14_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPS13_BUCK_RAMP_DELAY, \
.vsel_reg = S2MPS13_REG_B1OUT + (num - 1) * 2, \
.vsel_mask = S2MPS14_BUCK_VSEL_MASK, \
.enable_reg = S2MPS13_REG_B1CTRL + (num - 1) * 2, \
.enable_mask = S2MPS14_ENABLE_MASK \
}
static const struct regulator_desc s2mps13_regulators[] = {
regulator_desc_s2mps13_ldo(1, MIN_800_MV, STEP_12_5_MV, 0x00),
regulator_desc_s2mps13_ldo(2, MIN_1400_MV, STEP_50_MV, 0x0C),
regulator_desc_s2mps13_ldo(3, MIN_1000_MV, STEP_25_MV, 0x08),
regulator_desc_s2mps13_ldo(4, MIN_800_MV, STEP_12_5_MV, 0x00),
regulator_desc_s2mps13_ldo(5, MIN_800_MV, STEP_12_5_MV, 0x00),
regulator_desc_s2mps13_ldo(6, MIN_800_MV, STEP_12_5_MV, 0x00),
regulator_desc_s2mps13_ldo(7, MIN_1000_MV, STEP_25_MV, 0x08),
regulator_desc_s2mps13_ldo(8, MIN_1000_MV, STEP_25_MV, 0x08),
regulator_desc_s2mps13_ldo(9, MIN_1000_MV, STEP_25_MV, 0x08),
regulator_desc_s2mps13_ldo(10, MIN_1400_MV, STEP_50_MV, 0x0C),
regulator_desc_s2mps13_ldo(11, MIN_800_MV, STEP_25_MV, 0x10),
regulator_desc_s2mps13_ldo(12, MIN_800_MV, STEP_25_MV, 0x10),
regulator_desc_s2mps13_ldo(13, MIN_800_MV, STEP_25_MV, 0x10),
regulator_desc_s2mps13_ldo(14, MIN_800_MV, STEP_12_5_MV, 0x00),
regulator_desc_s2mps13_ldo(15, MIN_800_MV, STEP_12_5_MV, 0x00),
regulator_desc_s2mps13_ldo(16, MIN_1400_MV, STEP_50_MV, 0x0C),
regulator_desc_s2mps13_ldo(17, MIN_1400_MV, STEP_50_MV, 0x0C),
regulator_desc_s2mps13_ldo(18, MIN_1000_MV, STEP_25_MV, 0x08),
regulator_desc_s2mps13_ldo(19, MIN_1000_MV, STEP_25_MV, 0x08),
regulator_desc_s2mps13_ldo(20, MIN_1400_MV, STEP_50_MV, 0x0C),
regulator_desc_s2mps13_ldo(21, MIN_1000_MV, STEP_25_MV, 0x08),
regulator_desc_s2mps13_ldo(22, MIN_1000_MV, STEP_25_MV, 0x08),
regulator_desc_s2mps13_ldo(23, MIN_800_MV, STEP_12_5_MV, 0x00),
regulator_desc_s2mps13_ldo(24, MIN_800_MV, STEP_12_5_MV, 0x00),
regulator_desc_s2mps13_ldo(25, MIN_1400_MV, STEP_50_MV, 0x0C),
regulator_desc_s2mps13_ldo(26, MIN_1400_MV, STEP_50_MV, 0x0C),
regulator_desc_s2mps13_ldo(27, MIN_1400_MV, STEP_50_MV, 0x0C),
regulator_desc_s2mps13_ldo(28, MIN_1000_MV, STEP_25_MV, 0x08),
regulator_desc_s2mps13_ldo(29, MIN_1400_MV, STEP_50_MV, 0x0C),
regulator_desc_s2mps13_ldo(30, MIN_1400_MV, STEP_50_MV, 0x0C),
regulator_desc_s2mps13_ldo(31, MIN_1000_MV, STEP_25_MV, 0x08),
regulator_desc_s2mps13_ldo(32, MIN_1000_MV, STEP_25_MV, 0x08),
regulator_desc_s2mps13_ldo(33, MIN_1400_MV, STEP_50_MV, 0x0C),
regulator_desc_s2mps13_ldo(34, MIN_1000_MV, STEP_25_MV, 0x08),
regulator_desc_s2mps13_ldo(35, MIN_1400_MV, STEP_50_MV, 0x0C),
regulator_desc_s2mps13_ldo(36, MIN_800_MV, STEP_12_5_MV, 0x00),
regulator_desc_s2mps13_ldo(37, MIN_1000_MV, STEP_25_MV, 0x08),
regulator_desc_s2mps13_ldo(38, MIN_1400_MV, STEP_50_MV, 0x0C),
regulator_desc_s2mps13_ldo(39, MIN_1000_MV, STEP_25_MV, 0x08),
regulator_desc_s2mps13_ldo(40, MIN_1400_MV, STEP_50_MV, 0x0C),
regulator_desc_s2mps13_buck(1, MIN_500_MV, STEP_6_25_MV, 0x10),
regulator_desc_s2mps13_buck(2, MIN_500_MV, STEP_6_25_MV, 0x10),
regulator_desc_s2mps13_buck(3, MIN_500_MV, STEP_6_25_MV, 0x10),
regulator_desc_s2mps13_buck(4, MIN_500_MV, STEP_6_25_MV, 0x10),
regulator_desc_s2mps13_buck(5, MIN_500_MV, STEP_6_25_MV, 0x10),
regulator_desc_s2mps13_buck(6, MIN_500_MV, STEP_6_25_MV, 0x10),
regulator_desc_s2mps13_buck(7, MIN_500_MV, STEP_6_25_MV, 0x10),
regulator_desc_s2mps13_buck(8, MIN_1000_MV, STEP_12_5_MV, 0x20),
regulator_desc_s2mps13_buck(9, MIN_1000_MV, STEP_12_5_MV, 0x20),
regulator_desc_s2mps13_buck(10, MIN_500_MV, STEP_6_25_MV, 0x10),
};
static int s2mps14_regulator_enable(struct regulator_dev *rdev)
{
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
unsigned int val;
switch (s2mps11->dev_type) {
case S2MPS13X:
case S2MPS14X:
if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
val = S2MPS14_ENABLE_SUSPEND;
......@@ -406,6 +496,7 @@ static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev)
/* Below LDO should be always on or does not support suspend mode. */
switch (s2mps11->dev_type) {
case S2MPS13X:
case S2MPS14X:
switch (rdev_id) {
case S2MPS14_LDO3:
......@@ -831,6 +922,10 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
s2mps11->rdev_num = ARRAY_SIZE(s2mps11_regulators);
regulators = s2mps11_regulators;
break;
case S2MPS13X:
s2mps11->rdev_num = ARRAY_SIZE(s2mps13_regulators);
regulators = s2mps13_regulators;
break;
case S2MPS14X:
s2mps11->rdev_num = ARRAY_SIZE(s2mps14_regulators);
regulators = s2mps14_regulators;
......@@ -927,6 +1022,7 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
static const struct platform_device_id s2mps11_pmic_id[] = {
{ "s2mps11-pmic", S2MPS11X},
{ "s2mps13-pmic", S2MPS13X},
{ "s2mps14-pmic", S2MPS14X},
{ "s2mpu02-pmic", S2MPU02},
{ },
......
......@@ -28,6 +28,7 @@
#define MIN_800_MV 800000
#define MIN_750_MV 750000
#define MIN_600_MV 600000
#define MIN_500_MV 500000
/* Macros to represent steps for LDO/BUCK */
#define STEP_50_MV 50000
......@@ -41,6 +42,7 @@ enum sec_device_type {
S5M8767X,
S2MPA01,
S2MPS11X,
S2MPS13X,
S2MPS14X,
S2MPU02,
};
......
/*
* s2mps13.h
*
* Copyright (c) 2014 Samsung Electronics Co., Ltd
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __LINUX_MFD_S2MPS13_H
#define __LINUX_MFD_S2MPS13_H
/* S2MPS13 registers */
enum s2mps13_reg {
S2MPS13_REG_ID,
S2MPS13_REG_INT1,
S2MPS13_REG_INT2,
S2MPS13_REG_INT3,
S2MPS13_REG_INT1M,
S2MPS13_REG_INT2M,
S2MPS13_REG_INT3M,
S2MPS13_REG_ST1,
S2MPS13_REG_ST2,
S2MPS13_REG_PWRONSRC,
S2MPS13_REG_OFFSRC,
S2MPS13_REG_BU_CHG,
S2MPS13_REG_RTCCTRL,
S2MPS13_REG_CTRL1,
S2MPS13_REG_CTRL2,
S2MPS13_REG_RSVD1,
S2MPS13_REG_RSVD2,
S2MPS13_REG_RSVD3,
S2MPS13_REG_RSVD4,
S2MPS13_REG_RSVD5,
S2MPS13_REG_RSVD6,
S2MPS13_REG_CTRL3,
S2MPS13_REG_RSVD7,
S2MPS13_REG_RSVD8,
S2MPS13_REG_WRSTBI,
S2MPS13_REG_B1CTRL,
S2MPS13_REG_B1OUT,
S2MPS13_REG_B2CTRL,
S2MPS13_REG_B2OUT,
S2MPS13_REG_B3CTRL,
S2MPS13_REG_B3OUT,
S2MPS13_REG_B4CTRL,
S2MPS13_REG_B4OUT,
S2MPS13_REG_B5CTRL,
S2MPS13_REG_B5OUT,
S2MPS13_REG_B6CTRL,
S2MPS13_REG_B6OUT,
S2MPS13_REG_B7CTRL,
S2MPS13_REG_B7OUT,
S2MPS13_REG_B8CTRL,
S2MPS13_REG_B8OUT,
S2MPS13_REG_B9CTRL,
S2MPS13_REG_B9OUT,
S2MPS13_REG_B10CTRL,
S2MPS13_REG_B10OUT,
S2MPS13_REG_BB1CTRL,
S2MPS13_REG_BB1OUT,
S2MPS13_REG_BUCK_RAMP1,
S2MPS13_REG_BUCK_RAMP2,
S2MPS13_REG_LDO_DVS1,
S2MPS13_REG_LDO_DVS2,
S2MPS13_REG_LDO_DVS3,
S2MPS13_REG_B6OUT2,
S2MPS13_REG_L1CTRL,
S2MPS13_REG_L2CTRL,
S2MPS13_REG_L3CTRL,
S2MPS13_REG_L4CTRL,
S2MPS13_REG_L5CTRL,
S2MPS13_REG_L6CTRL,
S2MPS13_REG_L7CTRL,
S2MPS13_REG_L8CTRL,
S2MPS13_REG_L9CTRL,
S2MPS13_REG_L10CTRL,
S2MPS13_REG_L11CTRL,
S2MPS13_REG_L12CTRL,
S2MPS13_REG_L13CTRL,
S2MPS13_REG_L14CTRL,
S2MPS13_REG_L15CTRL,
S2MPS13_REG_L16CTRL,
S2MPS13_REG_L17CTRL,
S2MPS13_REG_L18CTRL,
S2MPS13_REG_L19CTRL,
S2MPS13_REG_L20CTRL,
S2MPS13_REG_L21CTRL,
S2MPS13_REG_L22CTRL,
S2MPS13_REG_L23CTRL,
S2MPS13_REG_L24CTRL,
S2MPS13_REG_L25CTRL,
S2MPS13_REG_L26CTRL,
S2MPS13_REG_L27CTRL,
S2MPS13_REG_L28CTRL,
S2MPS13_REG_L30CTRL,
S2MPS13_REG_L31CTRL,
S2MPS13_REG_L32CTRL,
S2MPS13_REG_L33CTRL,
S2MPS13_REG_L34CTRL,
S2MPS13_REG_L35CTRL,
S2MPS13_REG_L36CTRL,
S2MPS13_REG_L37CTRL,
S2MPS13_REG_L38CTRL,
S2MPS13_REG_L39CTRL,
S2MPS13_REG_L40CTRL,
S2MPS13_REG_LDODSCH1,
S2MPS13_REG_LDODSCH2,
S2MPS13_REG_LDODSCH3,
S2MPS13_REG_LDODSCH4,
S2MPS13_REG_LDODSCH5,
};
/* regulator ids */
enum s2mps13_regulators {
S2MPS13_LDO1,
S2MPS13_LDO2,
S2MPS13_LDO3,
S2MPS13_LDO4,
S2MPS13_LDO5,
S2MPS13_LDO6,
S2MPS13_LDO7,
S2MPS13_LDO8,
S2MPS13_LDO9,
S2MPS13_LDO10,
S2MPS13_LDO11,
S2MPS13_LDO12,
S2MPS13_LDO13,
S2MPS13_LDO14,
S2MPS13_LDO15,
S2MPS13_LDO16,
S2MPS13_LDO17,
S2MPS13_LDO18,
S2MPS13_LDO19,
S2MPS13_LDO20,
S2MPS13_LDO21,
S2MPS13_LDO22,
S2MPS13_LDO23,
S2MPS13_LDO24,
S2MPS13_LDO25,
S2MPS13_LDO26,
S2MPS13_LDO27,
S2MPS13_LDO28,
S2MPS13_LDO29,
S2MPS13_LDO30,
S2MPS13_LDO31,
S2MPS13_LDO32,
S2MPS13_LDO33,
S2MPS13_LDO34,
S2MPS13_LDO35,
S2MPS13_LDO36,
S2MPS13_LDO37,
S2MPS13_LDO38,
S2MPS13_LDO39,
S2MPS13_LDO40,
S2MPS13_BUCK1,
S2MPS13_BUCK2,
S2MPS13_BUCK3,
S2MPS13_BUCK4,
S2MPS13_BUCK5,
S2MPS13_BUCK6,
S2MPS13_BUCK7,
S2MPS13_BUCK8,
S2MPS13_BUCK9,
S2MPS13_BUCK10,
S2MPS13_REGULATOR_MAX,
};
/*
* Default ramp delay in uv/us. Datasheet says that ramp delay can be
* controlled however it does not specify which register is used for that.
* Let's assume that default value will be set.
*/
#define S2MPS13_BUCK_RAMP_DELAY 12500
#endif /* __LINUX_MFD_S2MPS13_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment