- 30 May, 2015 10 commits
-
-
Mauro Carvalho Chehab authored
Keeping everything altogether makes harder to reorganize the DocBook. So, move the FE_GET_INFO ioctl and the associated structures into a separate file. No functional changes. Signed-off-by:Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
The DVB part of the docbook has a completely different format than the V4L2 part, as it was written as a separate document. As the V4L2 documentation is on better shape, and its format allows adding more information, let's use it for FE_GET_INFO and gradually update the non-legacy DVB ioctls using the new format. Signed-off-by: -
Mauro Carvalho Chehab authored
Using typedefs is already bad enough, but doing it together with enum declaration is even worse. Also, it breaks the scripts at DocBook that would be generating reference pointers for the enums. Well, we can't get rid of typedef right now, but let's at least declare it on a separate line, and let the scripts to generate the cross-reference, as this is needed for the next DocBook patches. Signed-off-by: -
Mauro Carvalho Chehab authored
Although the recommended usage is the DVBv5 API calls, the documentation doesn't make it clear about what's the recommended calls and what's legacy. So, move the legacy API bits to a separate xml, putting them into a new section. Please notice that more changes are needed, since some of the bits there are cross-referenced elsewhere. Signed-off-by: -
Mauro Carvalho Chehab authored
The DVB frontend API got bitrotten. Update it. Signed-off-by: -
Mauro Carvalho Chehab authored
Currently, it is using 'role="tt"', but this is not defined at the DocBook 4.5 spec. The net result is that no emphasis happens. So, replace them to bold emphasis. Signed-off-by: -
Mauro Carvalho Chehab authored
An illustration of what's considered a typical media device may help people to better understand the contents of the media infrastructure API docbook. So, add it. Signed-off-by: -
Mauro Carvalho Chehab authored
The Docbook mistakenly makes to believe that all needed APIs for media devices are there. Add a note there pointing that some sub-devices are actually be controlled via ALSA API. Signed-off-by: -
Mauro Carvalho Chehab authored
The list of standards at the media docbook is incomplete, and it is mentioning that the DVB-S2 & friends is "currently being updated". That's wrong, as such update occurred back in 2008. So, provide a more complete list of supported standards and add a reference to the actual list. Signed-off-by: -
Jemma Denson authored
The ucblocks register is probably a counter and not a rate; assume it is so and change the calculations as required. Signed-off-by:
Jemma Denson <jdenson@gmail.com> Signed-off-by:
-
- 20 May, 2015 20 commits
-
-
Antti Palosaari authored
Frontend bandwidth calculation overflows on very high DVB-S/S2 symbol rates. Use mult_frac() macro in order to keep calculation correct. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/tuners/e4000.c:287:32: warning: constant 2208000000 is so big it is long long drivers/media/tuners/e4000.c:287:32: warning: decimal constant 2208000000 is between LONG_MAX and ULONG_MAX. For C99 that means long long, C90 compilers are very likely to produce unsigned long (and a warning) here drivers/media/tuners/e4000.c:287:3: warning: this decimal constant is unsigned only in ISO C90 .rangehigh = 2208000000, ^ Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: -
Antti Palosaari authored
Implement V4L2 subdevice tuner and core ops. After that this driver is hybrid driver implementing both V4L2 and DVB ops. Signed-off-by:
-
Antti Palosaari authored
* Rename device state from 's' to 'dev'. * Move single include to driver private header. * Change error handling type of each function to one I tend use nowadays. * Remove dummy register write from init. Even Windows driver does this multiple times remove it as I have never seen any I2C errors. * Define I2C client pointer for each function and use it. * Do not clean tuner ops during driver remove - not needed. * Disable sysfs device bind / unbind. We are not allowed manually bind / unbind device from the driver currently. * Rename some other variables. Signed-off-by:
-
Antti Palosaari authored
Update synthesizer calculation to model I prefer nowadays. It is mostly just renaming some variables to ones I think are most standard. Also add 'schematic' of synthesizer following my current understanding. Signed-off-by:
-
Dan Carpenter authored
This code works fine but static checkers complain. The test_bit() function takes the bit number and not a mask. Then the other issue is that we were using USB_STATE_URB_BUF which is BIT(0) instead of URB_BUF. Also we were open coding that instead of using the test/clear/set_bit() functions. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Hans Verkuil authored
The cobalt device is a PCIe card with 4 HDMI inputs (adv7604) and a connector that can be used to hook up an adv7511 transmitter or an adv7842 receiver daughterboard. This device is used within Cisco but is sadly not available outside of Cisco. Nevertheless it is a very interesting driver that can serve as an example of how to support HDMI hardware and how to use the popular adv devices. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
This makes it easier for the bridge driver to just passthrough such events to the corresponding device node. Signed-off-by:
-
jean-michel.hautbois@vodalys.com authored
All drivers use custom notifications, in particular when source changes. The bridge only has to map the subdev that sends it to whatever video node it is connected to. Signed-off-by:
Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com> Signed-off-by:
-
Hans Verkuil authored
vb2_buffer_done() already allows STATE_QUEUED, but currently only when not streaming. It is useful to allow it while streaming as well, as this makes it possible for drivers to requeue buffers while waiting for a stable video signal. Signed-off-by:
-
Hans Verkuil authored
Replace the dummy video format operations by pad format operations that configure the output format. Copied from the adv7604 driver. Note: while arch/blackfin/mach-bf609/boards/ezkit.c uses adv7842_platform_data this source has not been updated because it is broken since the very beginning. It depends on a struct adv7842_output_format that does not exist. And besides that gcc has no support for bf609 so nobody can compile it except by installing a toolchain from ADI. Signed-off-by:
-
Patrick Boettcher authored
Remove multiple blank likes. Signed-off-by:
Patrick Boettcher <patrick.boettcher@posteo.de> Signed-off-by:
-
Jemma Denson authored
These state vars are used for more than just ber calculation, also fix typo. Signed-off-by:
-
Jemma Denson authored
BER & UCB aren't available unless we're locked; don't update dvbv5 stats when not locked and mark these counters as unavailable. Signed-off-by:
-
Jemma Denson authored
DVBv3 is a legacy API. Drivers should use DVBv5, in order to support modern applications. So, implement UCB using dvbv5. Signed-off-by:
-
Jemma Denson authored
Instead of reading BER again for DVBv3 call, use the value from the cache. Signed-off-by:
-
Jemma Denson authored
DVBv3 is a legacy API. Drivers should use DVBv5, in order to support modern applications. So, implement BER using dvbv5. Signed-off-by:
-
Mauro Carvalho Chehab authored
Use const on the static data, as gcc may optimize better the code. Also, would prevent that some code would override the data there. Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/dvb-frontends/cx24120.c:1182:5: warning: no previous prototype for 'cx24120_init' [-Wmissing-prototypes] int cx24120_init(struct dvb_frontend *fe) ^ Signed-off-by: -
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/dvb-frontends/cx24120.c: In function 'cx24120_message_send': drivers/media/dvb-frontends/cx24120.c:368:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] int ret, ficus; ^ The values written by cx24120 are never checked. So, remove the check here too. That's said, the best would be to do the reverse, but globally: to properly handle the error codes. Signed-off-by:
-
- 19 May, 2015 1 commit
-
-
Jemma Denson authored
Add in all the likely values for setting fec on tuning. Some values yet to be tested but very likely to be correct. In the very unlikely event that these are wrong tuning with FEC_AUTO will still work. Signed-off-by:
-
- 18 May, 2015 9 commits
-
-
Jemma Denson authored
If set, all the other drivers reset no_base_addr on failure to attach - git commit for this being added to some of them seems to be eccd15aa This driver has been floating around outside the mainline for so long it hasn't had this fix, so add it in. Whilst here tidy surrounding code to fix style issues. Signed-off-by:
-
Jemma Denson authored
Remove reg1 by refactoring for loops Change ret into an int as it's only used for return values now, and remove reset_result by using ret instead. Signed-off-by:
-
Jemma Denson authored
Use reg instead of ret for all calls to readreg, remove ret_EA as it doesn't need to be a separate var anymore. Signed-off-by:
-
Jemma Denson authored
Probably a remnant of this driver being reverse engineered, cx24120_init assigned ret on each call to writereg - they're not used for anything so remove them to clear up the codebase. Signed-off-by:
-
Jemma Denson authored
Remove __func__ from calls to dev_dbg as dynamic debug can add in the function name anyway. Remove debug call in dvbv3 read_signal_strength as userspace has this value anyway. Reword some strings to make them simpler / more obvious. Signed-off-by:
-
Jemma Denson authored
Better to report CNR via DVBv5 stats, as scale can be used. Signed-off-by:
-
Jemma Denson authored
Previous version of this driver had a memset before every call to cmd. This meant the default value of cmd.arg[1] was zero unless burst is set. Make sure it remains zero. Also fe_sec_mini_cmd_t is an enum, so test against it. Signed-off-by:
-
Jemma Denson authored
Signed-off-by:
-
Jemma Denson authored
Algorithm copied from cx24117.c - it seems to work. Showing 95% on a signal I know to be somewhere around 74dBuV. [mchehab@osg.samsung.net: merged two patches, to avoid breaking compilation] Signed-off-by:
-
