- 20 Sep, 2012 4 commits
-
-
John Fastabend authored
In ixgbevf_reset_hw_vf() msleep is called while holding mbx_lock resulting in a schedule while atomic bug with trace below. This patch uses mdelay instead. BUG: scheduling while atomic: ip/6539/0x00000002 2 locks held by ip/6539: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81419cc3>] rtnl_lock+0x17/0x19 #1: (&(&adapter->mbx_lock)->rlock){+.+...}, at: [<ffffffffa0030855>] ixgbevf_reset+0x30/0xc1 [ixgbevf] Modules linked in: ixgbevf ixgbe mdio libfc scsi_transport_fc 8021q scsi_tgt garp stp llc cpufreq_ondemand acpi_cpufreq freq_table mperf ipv6 uinput igb coretemp hwmon crc32c_intel ioatdma i2c_i801 shpchp microcode lpc_ich mfd_core i2c_core joydev dca pcspkr serio_raw pata_acpi ata_generic usb_storage pata_jmicron Pid: 6539, comm: ip Not tainted 3.6.0-rc3jk-net-next+ #104 Call Trace: [<ffffffff81072202>] __schedule_bug+0x6a/0x79 [<ffffffff814bc7e0>] __schedule+0xa2/0x684 [<ffffffff8108f85f>] ? trace_hardirqs_off+0xd/0xf [<ffffffff814bd0c0>] schedule+0x64/0x66 [<ffffffff814bb5e2>] schedule_timeout+0xa6/0xca [<ffffffff810536b9>] ? lock_timer_base+0x52/0x52 [<ffffffff812629e0>] ? __udelay+0x15/0x17 [<ffffffff814bb624>] schedule_timeout_uninterruptible+0x1e/0x20 [<ffffffff810541c0>] msleep+0x1b/0x22 [<ffffffffa002e723>] ixgbevf_reset_hw_vf+0x90/0xe5 [ixgbevf] [<ffffffffa0030860>] ixgbevf_reset+0x3b/0xc1 [ixgbevf] [<ffffffffa0032fba>] ixgbevf_open+0x43/0x43e [ixgbevf] [<ffffffff81409610>] ? dev_set_rx_mode+0x2e/0x33 [<ffffffff8140b0f1>] __dev_open+0xa0/0xe5 [<ffffffff814097ed>] __dev_change_flags+0xbe/0x142 [<ffffffff8140b01c>] dev_change_flags+0x21/0x56 [<ffffffff8141a843>] do_setlink+0x2e2/0x7f4 [<ffffffff81016e36>] ? native_sched_clock+0x37/0x39 [<ffffffff8141b0ac>] rtnl_newlink+0x277/0x4bb [<ffffffff8141aee9>] ? rtnl_newlink+0xb4/0x4bb [<ffffffff812217d1>] ? selinux_capable+0x32/0x3a [<ffffffff8104fb17>] ? ns_capable+0x4f/0x67 [<ffffffff81419cc3>] ? rtnl_lock+0x17/0x19 [<ffffffff81419f28>] rtnetlink_rcv_msg+0x236/0x253 [<ffffffff81419cf2>] ? rtnetlink_rcv+0x2d/0x2d [<ffffffff8142fd42>] netlink_rcv_skb+0x43/0x94 [<ffffffff81419ceb>] rtnetlink_rcv+0x26/0x2d [<ffffffff8142faf1>] netlink_unicast+0xee/0x174 [<ffffffff81430327>] netlink_sendmsg+0x26a/0x288 [<ffffffff813fb04f>] ? rcu_read_unlock+0x56/0x67 [<ffffffff813f5e6d>] __sock_sendmsg_nosec+0x58/0x61 [<ffffffff813f81b7>] __sock_sendmsg+0x3d/0x48 [<ffffffff813f8339>] sock_sendmsg+0x6e/0x87 [<ffffffff81107c9f>] ? might_fault+0xa5/0xac [<ffffffff81402a72>] ? copy_from_user+0x2a/0x2c [<ffffffff81402e62>] ? verify_iovec+0x54/0xaa [<ffffffff813f9834>] __sys_sendmsg+0x206/0x288 [<ffffffff810694fa>] ? up_read+0x23/0x3d [<ffffffff811307e5>] ? fcheck_files+0xac/0xea [<ffffffff8113095e>] ? fget_light+0x3a/0xb9 [<ffffffff813f9a2e>] sys_sendmsg+0x42/0x60 [<ffffffff814c5ba9>] system_call_fastpath+0x16/0x1b CC: Eric Dumazet <edumazet@google.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-By: Robert Garrett <robertx.e.garrett@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This change makes it so that the VF can support the PF/VF API negotiation protocol. Specifically in this case we are adding support for API 1.0 which will mean that the VF is capable of cleaning up buffers that span multiple descriptors without triggering an error. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Akeem G. Abodunrin authored
Current implementation enables EEE on only i350 device. This patch enables EEE on all eee_supported devices. Also, configured LPI clock to keep running before EEE is enabled on i210 and i211 devices. Signed-off-by: Akeem G. Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
For some reason the reading of the RQDPC register was being artificially limited to 4K. Instead of limiting the value we should read the value and add the full amount. Otherwise this can lead to a misleading number of dropped packets when the actual value is in fact much higher. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 19 Sep, 2012 13 commits
-
-
Michal Schmidt authored
The r8169 driver currently limits the DMA burst for TX to 1024 bytes. I have a box where this prevents the interface from using the gigabit line to its full potential. This patch solves the problem by setting TX_DMA_BURST to unlimited. The box has an ASRock B75M motherboard with on-board RTL8168evl/8111evl (XID 0c900880). TSO is enabled. I used netperf (TCP_STREAM test) to measure the dependency of TX throughput on MTU. I did it for three different values of TX_DMA_BURST ('5'=512, '6'=1024, '7'=unlimited). This chart shows the results: http://michich.fedorapeople.org/r8169/r8169-effects-of-TX_DMA_BURST.png Interesting points: - With the current DMA burst limit (1024): - at the default MTU=1500 I get only 842 Mbit/s. - when going from small MTU, the performance rises monotonically with increasing MTU only up to a peak at MTU=1076 (908 MBit/s). Then there's a sudden drop to 762 MBit/s from which the throughput rises monotonically again with further MTU increases. - With a smaller DMA burst limit (512): - there's a similar peak at MTU=1076 and another one at MTU=564. - With unlimited DMA burst: - at the default MTU=1500 I get nice 940 Mbit/s. - the throughput rises monotonically with increasing MTU with no strange peaks. Notice that the peaks occur at MTU sizes that are multiples of the DMA burst limit plus 52. Why 52? Because: 20 (IP header) + 20 (TCP header) + 12 (TCP options) = 52 The Realtek-provided r8168 driver (v8.032.00) uses unlimited TX DMA burst too, except for CFG_METHOD_1 where the TX DMA burst is set to 512 bytes. CFG_METHOD_1 appears to be the oldest MAC version of "RTL8168B/8111B", i.e. RTL_GIGA_MAC_VER_11 in r8169. Not sure if this MAC version really needs the smaller burst limit, or if any other versions have similar requirements. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amerigo Wang authored
Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Michal Kubeček <mkubecek@suse.cz> Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amerigo Wang authored
Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Michal Kubeček <mkubecek@suse.cz> Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amerigo Wang authored
Two years ago, Shan Wei tried to fix this: http://patchwork.ozlabs.org/patch/43905/ The problem is that RFC2460 requires an ICMP Time Exceeded -- Fragment Reassembly Time Exceeded message should be sent to the source of that fragment, if the defragmentation times out. " If insufficient fragments are received to complete reassembly of a packet within 60 seconds of the reception of the first-arriving fragment of that packet, reassembly of that packet must be abandoned and all the fragments that have been received for that packet must be discarded. If the first fragment (i.e., the one with a Fragment Offset of zero) has been received, an ICMP Time Exceeded -- Fragment Reassembly Time Exceeded message should be sent to the source of that fragment. " As Herbert suggested, we could actually use the standard IPv6 reassembly code which follows RFC2460. With this patch applied, I can see ICMP Time Exceeded sent from the receiver when the sender sent out 3/4 fragmented IPv6 UDP packet. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Michal Kubeček <mkubecek@suse.cz> Cc: David Miller <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: netfilter-devel@vger.kernel.org Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amerigo Wang authored
As pointed by Michal, it is necessary to add a new namespace for nf_conntrack_reasm code, this prepares for the second patch. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Michal Kubeček <mkubecek@suse.cz> Cc: David Miller <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: netfilter-devel@vger.kernel.org Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amerigo Wang authored
In netpoll tx path, we miss the chance of calling ->ndo_select_queue(), thus could cause problems when bonding is involved. This patch makes dev_pick_tx() extern (and rename it to netdev_pick_tx()) to let netpoll call it in netpoll_send_skb_on_dev(). Reported-by: Sylvain Munaut <s.munaut@whatever-company.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <amwang@redhat.com> Tested-by: Sylvain Munaut <s.munaut@whatever-company.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
The internal functions for add/deleting addresses don't change their argument. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mika Westerberg authored
When building 64-bit kernel with this driver we get following warnings from the compiler: drivers/net/ethernet/i825xx/znet.c: In function ‘hardware_init’: drivers/net/ethernet/i825xx/znet.c:863:29: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/net/ethernet/i825xx/znet.c:870:29: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Fix these by calling isa_virt_to_bus() before passing the pointers to set_dma_addr(). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Add GSO support to GRE tunnels. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Instead of forcing device drivers to provide empty ethtool_ops or tweak net/core/ethtool.c again, we could provide a generic ethtool_ops. This occurred to me when I wanted to add GSO support to GRE tunnels. ethtool -k support should be generic for all drivers. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Maciej Żenczykowski <maze@google.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gao feng authored
When moving a nic from net namespace A to net namespace B, in dev_change_net_namesapce,we call __dev_get_by_name to decide if the netns B has the device has the same name. if the netns B already has the same named device,we call dev_get_valid_name to try to get a valid name for this nic in the netns B,but net_device->nd_net still point to netns A now. this patch fix it. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li RongQing authored
If dst cache dst_a copies from dst_b, and dst_b copies from dst_c, check if dst_a is expired or not, we should not end with dst_a->dst.from, dst_b, we should check dst_c. CC: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
dev_queue_xmit_nit() should be called right before ndo_start_xmit() calls or we might give wrong packet contents to taps users : Packet checksum can be changed, or packet can be linearized or segmented, and segments partially sent for the later case. Also a memory allocation can fail and packet never really hit the driver entry point. Reported-by: Jamie Gloudon <jamie.gloudon@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 18 Sep, 2012 3 commits
-
-
Peter Senna Tschudin authored
Found by http://coccinelle.lip6.fr/Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peter Senna Tschudin authored
Found by http://coccinelle.lip6.fr/Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peter Senna Tschudin authored
Found by http://coccinelle.lip6.fr/Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 17 Sep, 2012 16 commits
-
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
These arrays are accessed by iteration in llc_exec_station_trans_actions(). There must not be any zero-filled gaps in them, so the explicit indices are pointless. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
We only ever put one skb on the send queue, and then immediately send it. Remove the queue and call dev_queue_xmit() directly. This leaves struct llc_station empty, so remove that as well. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
We only ever put one skb on the event queue, and then immediately process it. Remove the queue and fold together the related functions, removing several blatantly false comments. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
The initial state is UP and there is no way to enter the other states as the required event type is never generated. Delete all states, event types, and other dead code. The only thing left is handling of the XID and TEST commands. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alan Cox authored
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matthew Vick authored
Previously I210/I211 followed the same code flow as 82580/I350 for 1588. However, since the register sets have changed, we must update the implementation to accommodate the register changes. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Matthew Vick authored
In rare circumstances, it's possible a descriptor writeback will occur before a timestamped Tx packet will go out on the wire, leading to the driver believing the hardware failed to timestamp the packet. Schedule a work item for 82576 and use the available time sync interrupt registers on 82580 and above to account for this. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Matthew Vick authored
Change the name of the adapter in the PTP struct to enable easier correlation between interface and PTP device. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Matthew Vick authored
Update ethtool_get_ts_info to not report any supported functionality on 82575 and add support for V2 Sync and V2 Delay packets. In the case where CONFIG_IGB_PTP is not defined, we should be reporting default values. v2: Correct the function to return EOPNOTSUPP when there is no PTP support or the device does not support PTP. Also fix minor whitespace issue. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Cc: Richard Cochran <richardcochran@gmail.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Matthew Vick authored
Where possible, move PTP-related functions into igb_ptp.c and update the names of functions and variables to match the established coding style in the files and specify that they are PTP-specific. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Matthew Vick authored
For users without CONFIG_IGB_PTP=y, we should not be compiling any PTP code into the driver. Tidy up the wrapping in igb to support this. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-nextDavid S. Miller authored
John W. Linville says: ==================== This is another batch of updates intended for the 3.7 stream. There are not a lot of large items, but iwlwifi, mwifiex, rt2x00, ath9k, and brcmfmac all get some attention. Wei Yongjun also provides a series of small maintenance fixes. This also includes a pull of the wireless tree in order to satisfy some prerequisites for later patches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jerr Kirsher says: > This series contains updates to igb (specifically PTP code). Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 16 Sep, 2012 1 commit
-
-
Mark Rustad authored
Noticed that the byte and packet count statistics are under- counting traffic handled by the DDP offload when there is more than one DDP completion processed in a single call to ixgbe_clean_rx_irq. This patch fixes that. I tried to optimize the setting of the rss value so that it only would have to be computed once, and only when there is a DDP completion present. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 15 Sep, 2012 3 commits
-
-
Catherine Sullivan authored
Added the reg_ops file to debugfs with commands to read and write a register to give users the ability to read and write individual registers on the fly. Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Catherine Sullivan authored
Added the netdev_ops file to debugfs with a command to call the ndo_tx_timeout function to give users the ability to simulate a tx_timeout call made by the kernel. Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Catherine Sullivan authored
This patch adds debugfs support to the ixgbe driver to give users the ability to access kernel information and to simulate kernel events. The filesystem is set up in the following driver/PCI-instance hierarchy: <debugfs> |-- ixgbe |-- PCI instance | |-- attribute files Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-