- 12 Feb, 2014 6 commits
-
-
Fan Du authored
Clear checking when user try to use ESN through netlink keymgr for AH. As only ESP and AH support ESN feature according to RFC. Signed-off-by:
Fan Du <fan.du@windriver.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
Fan Du authored
This patch add esn support for AH input stage by attaching upper 32bits sequence number right after packet payload as specified by RFC 4302. Then the ICV value will guard upper 32bits sequence number as well when packet going in. Signed-off-by:
-
Fan Du authored
This patch add esn support for AH output stage by attaching upper 32bits sequence number right after packet payload as specified by RFC 4302. Then the ICV value will guard upper 32bits sequence number as well when packet going out. Signed-off-by:
-
Fan Du authored
This patch add esn support for AH input stage by attaching upper 32bits sequence number right after packet payload as specified by RFC 4302. Then the ICV value will guard upper 32bits sequence number as well when packet getting in. Signed-off-by:
-
Fan Du authored
This patch add esn support for AH output stage by attaching upper 32bits sequence number right after packet payload as specified by RFC 4302. Then the ICV value will guard upper 32bits sequence number as well when packet going out. Signed-off-by:
-
Fan Du authored
As compared with skb_to_sgvec, skb_to_sgvec_nomark only map skb to given sglist without mark the sg which contain last skb data as the end. So the caller can mannipulate sg list as will when padding new data after the first call without calling sg_unmark_end to expend sg list. Signed-off-by:
-
- 11 Feb, 2014 29 commits
-
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull microblaze fixes from Michal Simek: - Fix two compilation issues - HZ, readq/writeq - Fix stack protection support * tag 'microblaze-3.14-rc3' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix a typo when disabling stack protection microblaze: Define readq and writeq IO helper function microblaze: Fix missing HZ macro
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 bugfixes from Martin Schwidefsky: "A collection a bug fixes. Most of them are minor but two of them are more severe. The linkage stack bug can be used by user space to force an oops, with panic_on_oops this is a denial-of-service. And the dump memory detection issue can cause incomplete memory dumps" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cio: improve cio_commit_config s390: fix kernel crash due to linkage stack instructions s390/dump: Fix dump memory detection s390/appldata: restore missing init_virt_timer() s390/qdio: correct program-controlled interruption checking s390/qdio: for_each macro correctness
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking updates from David Miller: 1) Fix flexcan build on big endian, from Arnd Bergmann 2) Correctly attach cpsw to GPIO bitbang MDIO drive, from Stefan Roese 3) udp_add_offload has to use GFP_ATOMIC since it can be invoked from non-sleepable contexts. From Or Gerlitz 4) vxlan_gro_receive() does not iterate over all possible flows properly, fix also from Or Gerlitz 5) CAN core doesn't use a proper SKB destructor when it hooks up sockets to SKBs. Fix from Oliver Hartkopp 6) ip_tunnel_xmit() can use an uninitialized route pointer, fix from Eric Dumazet 7) Fix address family assignment in IPVS, from Michal Kubecek 8) Fix ath9k build on ARM, from Sujith Manoharan 9) Make sure fail_over_mac only applies for the correct bonding modes, from Ding Tianhong 10) The udp offload code doesn't use RCU correctly, from Shlomo Pongratz 11) Handle gigabit features properly in generic PHY code, from Florian Fainelli 12) Don't blindly invoke link operations in rtnl_link_get_slave_info_data_size, they are optional. Fix from Fernando Luis Vazquez Cao 13) Add USB IDs for Netgear Aircard 340U, from Bjørn Mork 14) Handle netlink packet padding properly in openvswitch, from Thomas Graf 15) Fix oops when deleting chains in nf_tables, from Patrick McHardy 16) Fix RX stalls in xen-netback driver, from Zoltan Kiss 17) Fix deadlock in mac80211 stack, from Emmanuel Grumbach 18) inet_nlmsg_size() forgets to consider ifa_cacheinfo, fix from Geert Uytterhoeven 19) tg3_change_mtu() can deadlock, fix from Nithin Sujir 20) Fix regression in setting SCTP local source addresses on accepted sockets, caused by some generic ipv6 socket changes. Fix from Matija Glavinic Pecotic 21) IPPROTO_* must be pure defines, otherwise module aliases don't get constructed properly. Fix from Jan Moskyto 22) IPV6 netconsole setup doesn't work properly unless an explicit source address is specified, fix from Sabrina Dubroca 23) Use __GFP_NORETRY for high order skb page allocations in sock_alloc_send_pskb and skb_page_frag_refill. From Eric Dumazet 24) Fix a regression added in netconsole over bridging, from Cong Wang 25) TCP uses an artificial offset of 1ms for SRTT, but this doesn't jive well with TCP pacing which needs the SRTT to be accurate. Fix from Eric Dumazet 26) Several cases of missing header file includes from Rashika Kheria 27) Add ZTE MF667 device ID to qmi_wwan driver, from Raymond Wanyoike 28) TCP Small Queues doesn't handle nonagle properly in some corner cases, fix from Eric Dumazet 29) Remove extraneous read_unlock in bond_enslave, whoops. From Ding Tianhong 30) Fix 9p trans_virtio handling of vmalloc buffers, from Richard Yao * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (136 commits) 6lowpan: fix lockdep splats alx: add missing stats_lock spinlock init 9p/trans_virtio.c: Fix broken zero-copy on vmalloc() buffers bonding: remove unwanted bond lock for enslave processing USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support tcp: tsq: fix nonagle handling bridge: Prevent possible race condition in br_fdb_change_mac_address bridge: Properly check if local fdb entry can be deleted when deleting vlan bridge: Properly check if local fdb entry can be deleted in br_fdb_delete_by_port bridge: Properly check if local fdb entry can be deleted in br_fdb_change_mac_address bridge: Fix the way to check if a local fdb entry can be deleted bridge: Change local fdb entries whenever mac address of bridge device changes bridge: Fix the way to find old local fdb entries in br_fdb_change_mac_address bridge: Fix the way to insert new local fdb entries in br_fdb_changeaddr bridge: Fix the way to find old local fdb entries in br_fdb_changeaddr tcp: correct code comment stating 3 min timeout for FIN_WAIT2, we only do 1 min net: vxge: Remove unused device pointer net: qmi_wwan: add ZTE MF667 3c59x: Remove unused pointer in vortex_eisa_cleanup() net: fix 'ip rule' iif/oif device rename ... -
Eric Dumazet authored
When a device ndo_start_xmit() calls again dev_queue_xmit(), lockdep can complain because dev_queue_xmit() is re-entered and the spinlocks protecting tx queues share a common lockdep class. Same issue was fixed for bonding/l2tp/ppp in commits 0daa2303 ("[PATCH] bonding: lockdep annotation") 49ee4920 ("bonding: set qdisc_tx_busylock to avoid LOCKDEP splat") 23d3b8bf ("net: qdisc busylock needs lockdep annotations ") 303c07db ("ppp: set qdisc_tx_busylock to avoid LOCKDEP splat ") Reported-by:
Alexander Aring <alex.aring@gmail.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Tested-by:
David S. Miller <davem@davemloft.net>
-
John Greene authored
Trivial fix for init time stack trace occuring in alx_get_stats64 upon start up. Should have been part of commit adding the spinlock: f1b6b106 alx: add alx_get_stats64 operation Signed-off-by:
John Greene <jogreene@redhat.com> Signed-off-by:
-
Richard Yao authored
The 9p-virtio transport does zero copy on things larger than 1024 bytes in size. It accomplishes this by returning the physical addresses of pages to the virtio-pci device. At present, the translation is usually a bit shift. That approach produces an invalid page address when we read/write to vmalloc buffers, such as those used for Linux kernel modules. Any attempt to load a Linux kernel module from 9p-virtio produces the following stack. [<ffffffff814878ce>] p9_virtio_zc_request+0x45e/0x510 [<ffffffff814814ed>] p9_client_zc_rpc.constprop.16+0xfd/0x4f0 [<ffffffff814839dd>] p9_client_read+0x15d/0x240 [<ffffffff811c8440>] v9fs_fid_readn+0x50/0xa0 [<ffffffff811c84a0>] v9fs_file_readn+0x10/0x20 [<ffffffff811c84e7>] v9fs_file_read+0x37/0x70 [<ffffffff8114e3fb>] vfs_read+0x9b/0x160 [<ffffffff81153571>] kernel_read+0x41/0x60 [<ffffffff810c83ab>] copy_module_from_fd.isra.34+0xfb/0x180 Subsequently, QEMU will die printing: qemu-system-x86_64: virtio: trying to map MMIO memory This patch enables 9p-virtio to correctly handle this case. This not only enables us to load Linux kernel modules off virtfs, but also enables ZFS file-based vdevs on virtfs to be used without killing QEMU. Special thanks to both Avi Kivity and Alexander Graf for their interpretation of QEMU backtraces. Without their guidence, tracking down this bug would have taken much longer. Also, special thanks to Linus Torvalds for his insightful explanation of why this should use is_vmalloc_addr() instead of is_vmalloc_or_module_addr(): https://lkml.org/lkml/2014/2/8/272Signed-off-by:
Richard Yao <ryao@gentoo.org> Signed-off-by:
-
dingtianhong authored
The bond enslave processing don't hold bond->lock anymore, so release an unlocked rw lock will cause warning message, remove the unwanted read_unlock(&bond->lock). Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Acked-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
-
Liu Junliang authored
Signed-off-by:
Liu Junliang <liujunliang_ljl@163.com> Signed-off-by:
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "A bunch of fixes" * emailed patches fron Andrew Morton <akpm@linux-foundation.org>: ocfs2: check existence of old dentry in ocfs2_link() ocfs2: update inode size after zeroing the hole ocfs2: fix issue that ocfs2_setattr() does not deal with new_i_size==i_size mm/memory-failure.c: move refcount only in !MF_COUNT_INCREASED smp.h: fix x86+cpu.c sparse warnings about arch nonboot CPU calls mm: fix page leak at nfs_symlink() slub: do not assert not having lock in removing freed partial gitignore: add all.config ocfs2: fix ocfs2_sync_file() if filesystem is readonly drivers/edac/edac_mc_sysfs.c: poll timeout cannot be zero fs/file.c:fdtable: avoid triggering OOMs from alloc_fdmem xen: properly account for _PAGE_NUMA during xen pte translations mm/slub.c: list_lock may not be held in some circumstances drivers/md/bcache/extents.c: use %zi to format size_t vmcore: prevent PT_NOTE p_memsz overflow during header update drivers/message/i2o/i2o_config.c: fix deadlock in compat_ioctl(I2OGETIOPS) Documentation/: update 00-INDEX files checkpatch: fix detection of git repository get_maintainer: fix detection of git repository drivers/misc/sgi-gru/grukdump.c: unlocking should be conditional in gru_dump_context()
-
Xue jiufei authored
System call linkat first calls user_path_at(), check the existence of old dentry, and then calls vfs_link()->ocfs2_link() to do the actual work. There may exist a race when Node A create a hard link for file while node B rm it. Node A Node B user_path_at() ->ocfs2_lookup(), find old dentry exist rm file, add inode say inodeA to orphan_dir call ocfs2_link(),create a hard link for inodeA. rm the link, add inodeA to orphan_dir again When orphan_scan work start, it calls ocfs2_queue_orphans() to do the main work. It first tranverses entrys in orphan_dir, linking all inodes in this orphan_dir to a list look like this: inodeA->inodeB->...->inodeA When tranvering this list, it will fall into loop, calling iput() again and again. And finally trigger BUG_ON(inode->i_state & I_CLEAR). Signed-off-by:joyce <xuejiufei@huawei.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Junxiao Bi authored
fs-writeback will release the dirty pages without page lock whose offset are over inode size, the release happens at block_write_full_page_endio(). If not update, dirty pages in file holes may be released before flushed to the disk, then file holes will contain some non-zero data, this will cause sparse file md5sum error. To reproduce the bug, find a big sparse file with many holes, like vm image file, its actual size should be bigger than available mem size to make writeback work more frequently, tar it with -S option, then keep untar it and check its md5sum again and again until you get a wrong md5sum. Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Younger Liu <younger.liu@huawei.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Younger Liu authored
The issue scenario is as following: - Create a small file and fallocate a large disk space for a file with FALLOC_FL_KEEP_SIZE option. - ftruncate the file back to the original size again. but the disk free space is not changed back. This is a real bug that be fixed in this patch. In order to solve the issue above, we modified ocfs2_setattr(), if attr->ia_size != i_size_read(inode), It calls ocfs2_truncate_file(), and truncate disk space to attr->ia_size. Signed-off-by:
Younger Liu <younger.liu@huawei.com> Reviewed-by:
Jie Liu <jeff.liu@oracle.com> Tested-by:
Jensen <shencanquan@huawei.com> Signed-off-by:
-
Naoya Horiguchi authored
mce-test detected a test failure when injecting error to a thp tail page. This is because we take page refcount of the tail page in madvise_hwpoison() while the fix in commit a3e0f9e4 ("mm/memory-failure.c: transfer page count from head page to tail page after split thp") assumes that we always take refcount on the head page. When a real memory error happens we take refcount on the head page where memory_failure() is called without MF_COUNT_INCREASED set, so it seems to me that testing memory error on thp tail page using madvise makes little sense. This patch cancels moving refcount in !MF_COUNT_INCREASED for valid testing. [akpm@linux-foundation.org: s/&&/&/] Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Chen Gong <gong.chen@linux.intel.com> Cc: <stable@vger.kernel.org> [3.9+: a3e0f9e4] Signed-off-by:
-
Paul Gortmaker authored
Use what we already do for arch_disable_smp_support() to fix these: arch/x86/kernel/smpboot.c:1155:6: warning: symbol 'arch_enable_nonboot_cpus_begin' was not declared. Should it be static? arch/x86/kernel/smpboot.c:1160:6: warning: symbol 'arch_enable_nonboot_cpus_end' was not declared. Should it be static? kernel/cpu.c:512:13: warning: symbol 'arch_enable_nonboot_cpus_begin' was not declared. Should it be static? kernel/cpu.c:516:13: warning: symbol 'arch_enable_nonboot_cpus_end' was not declared. Should it be static? Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Rafael Aquini authored
Changes in commit a0b8cab3 ("mm: remove lru parameter from __pagevec_lru_add and remove parts of pagevec API") have introduced a call to add_to_page_cache_lru() which causes a leak in nfs_symlink() as now the page gets an extra refcount that is not dropped. Jan Stancek observed and reported the leak effect while running test8 from Connectathon Testsuite. After several iterations over the test case, which creates several symlinks on a NFS mountpoint, the test system was quickly getting into an out-of-memory scenario. This patch fixes the page leak by dropping that extra refcount add_to_page_cache_lru() is grabbing. Signed-off-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
Rafael Aquini <aquini@redhat.com> Acked-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Rik van Riel <riel@redhat.com> Cc: Jeff Layton <jlayton@redhat.com> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Cc: <stable@vger.kernel.org> [3.11.x+] Signed-off-by:
-
Steven Rostedt authored
Vladimir reported the following issue: Commit c65c1877 ("slub: use lockdep_assert_held") requires remove_partial() to be called with n->list_lock held, but free_partial() called from kmem_cache_close() on cache destruction does not follow this rule, leading to a warning: WARNING: CPU: 0 PID: 2787 at mm/slub.c:1536 __kmem_cache_shutdown+0x1b2/0x1f0() Modules linked in: CPU: 0 PID: 2787 Comm: modprobe Tainted: G W 3.14.0-rc1-mm1+ #1 Hardware name: 0000000000000600 ffff88003ae1dde8 ffffffff816d9583 0000000000000600 0000000000000000 ffff88003ae1de28 ffffffff8107c107 0000000000000000 ffff880037ab2b00 ffff88007c240d30 ffffea0001ee5280 ffffea0001ee52a0 Call Trace: __kmem_cache_shutdown+0x1b2/0x1f0 kmem_cache_destroy+0x43/0xf0 xfs_destroy_zones+0x103/0x110 [xfs] exit_xfs_fs+0x38/0x4e4 [xfs] SyS_delete_module+0x19a/0x1f0 system_call_fastpath+0x16/0x1b His solution was to add a spinlock in order to quiet lockdep. Although there would be no contention to adding the lock, that lock also requires disabling of interrupts which will have a larger impact on the system. Instead of adding a spinlock to a location where it is not needed for lockdep, make a __remove_partial() function that does not test if the list_lock is held, as no one should have it due to it being freed. Also added a __add_partial() function that does not do the lock validation either, as it is not needed for the creation of the cache. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Reported-by:
Vladimir Davydov <vdavydov@parallels.com> Suggested-by:
David Rientjes <rientjes@google.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Borislav Petkov authored
This is used by kbuild to load preset Kconfig options. We need to ignore it, otherwise git clean kills it. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Younger Liu authored
If filesystem is readonly, there is no need to flush drive's caches or force any uncommitted transactions. [akpm@linux-foundation.org: return -EROFS, not 0] Signed-off-by:
Younger Liu <younger.liucn@gmail.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
-
Prarit Bhargava authored
If you do echo 0 > /sys/module/edac_core/parameters/edac_mc_poll_msec the following stack trace is output because the edac module is not designed to poll with a timeout of zero. WARNING: CPU: 12 PID: 0 at lib/list_debug.c:33 __list_add+0xac/0xc0() list_add corruption. prev->next should be next (ffff8808291dd1b8), but was (null). (prev=ffff8808286fe3f8). Modules linked in: sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cfg80211 rfkill x86_pkg_temp_thermal coretemp kvm_intel kvm ixgbe e1000e crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt ptp sb_edac iTCO_vendor_support pps_core mdio ipmi_devintf edac_core ioatdma microcode shpchp lpc_ich pcspkr i2c_i801 dca mfd_core ipmi_si wmi ipmi_msghandler nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sd_mod sr_mod cdrom crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt isci i2c_algo_bit drm_kms_helper ttm drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod CPU: 12 PID: 0 Comm: swapper/12 Not tainted 3.13.0+ #1 Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013 Call Trace: <IRQ> __list_add+0xac/0xc0 __internal_add_timer+0xab/0x130 internal_add_timer+0x17/0x40 mod_timer_pinned+0xca/0x170 intel_pstate_timer_func+0x28a/0x380 call_timer_fn+0x36/0x100 run_timer_softirq+0x1ff/0x2f0 __do_softirq+0xf5/0x2e0 irq_exit+0x10d/0x120 smp_apic_timer_interrupt+0x45/0x60 apic_timer_interrupt+0x6d/0x80 <EOI> cpuidle_idle_call+0xb9/0x1f0 arch_cpu_idle+0xe/0x30 cpu_startup_entry+0x9e/0x240 start_secondary+0x1e4/0x290 kernel BUG at kernel/timer.c:1084! invalid opcode: 0000 [#1] SMP Modules linked in: sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cfg80211 rfkill x86_pkg_temp_thermal coretemp kvm_intel kvm ixgbe e1000e crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt ptp sb_edac iTCO_vendor_support pps_core mdio ipmi_devintf edac_core ioatdma microcode shpchp lpc_ich pcspkr i2c_i801 dca mfd_core ipmi_si wmi ipmi_msghandler nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sd_mod sr_mod cdrom crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt isci i2c_algo_bit drm_kms_helper ttm drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod CPU: 12 PID: 0 Comm: swapper/12 Tainted: G W 3.13.0+ #1 Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013 Call Trace: <IRQ> run_timer_softirq+0x245/0x2f0 __do_softirq+0xf5/0x2e0 irq_exit+0x10d/0x120 smp_apic_timer_interrupt+0x45/0x60 apic_timer_interrupt+0x6d/0x80 <EOI> cpuidle_idle_call+0xb9/0x1f0 arch_cpu_idle+0xe/0x30 cpu_startup_entry+0x9e/0x240 start_secondary+0x1e4/0x290 RIP cascade+0x93/0xa0 WARNING: CPU: 36 PID: 1154 at kernel/workqueue.c:1461 __queue_delayed_work+0xed/0x1a0() Modules linked in: sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cfg80211 rfkill x86_pkg_temp_thermal coretemp kvm_intel kvm ixgbe e1000e crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt ptp sb_edac iTCO_vendor_support pps_core mdio ipmi_devintf edac_core ioatdma microcode shpchp lpc_ich pcspkr i2c_i801 dca mfd_core ipmi_si wmi ipmi_msghandler nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sd_mod sr_mod cdrom crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt isci i2c_algo_bit drm_kms_helper ttm drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod CPU: 36 PID: 1154 Comm: kworker/u481:3 Tainted: G W 3.13.0+ #1 Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013 Workqueue: edac-poller edac_mc_workq_function [edac_core] Call Trace: dump_stack+0x45/0x56 warn_slowpath_common+0x7d/0xa0 warn_slowpath_null+0x1a/0x20 __queue_delayed_work+0xed/0x1a0 queue_delayed_work_on+0x27/0x50 edac_mc_workq_function+0x72/0xa0 [edac_core] process_one_work+0x17b/0x460 worker_thread+0x11b/0x400 kthread+0xd2/0xf0 ret_from_fork+0x7c/0xb0 This patch adds a range check in the edac_mc_poll_msec code to check for 0. Signed-off-by:Prarit Bhargava <prarit@redhat.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by:
-
Eric W. Biederman authored
Recently due to a spike in connections per second memcached on 3 separate boxes triggered the OOM killer from accept. At the time the OOM killer was triggered there was 4GB out of 36GB free in zone 1. The problem was that alloc_fdtable was allocating an order 3 page (32KiB) to hold a bitmap, and there was sufficient fragmentation that the largest page available was 8KiB. I find the logic that PAGE_ALLOC_COSTLY_ORDER can't fail pretty dubious but I do agree that order 3 allocations are very likely to succeed. There are always pathologies where order > 0 allocations can fail when there are copious amounts of free memory available. Using the pigeon hole principle it is easy to show that it requires 1 page more than 50% of the pages being free to guarantee an order 1 (8KiB) allocation will succeed, 1 page more than 75% of the pages being free to guarantee an order 2 (16KiB) allocation will succeed and 1 page more than 87.5% of the pages being free to guarantee an order 3 allocate will succeed. A server churning memory with a lot of small requests and replies like memcached is a common case that if anything can will skew the odds against large pages being available. Therefore let's not give external applications a practical way to kill linux server applications, and specify __GFP_NORETRY to the kmalloc in alloc_fdmem. Unless I am misreading the code and by the time the code reaches should_alloc_retry in __alloc_pages_slowpath (where __GFP_NORETRY becomes signification). We have already tried everything reasonable to allocate a page and the only thing left to do is wait. So not waiting and falling back to vmalloc immediately seems like the reasonable thing to do even if there wasn't a chance of triggering the OOM killer. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
-
Mel Gorman authored
Steven Noonan forwarded a users report where they had a problem starting vsftpd on a Xen paravirtualized guest, with this in dmesg: BUG: Bad page map in process vsftpd pte:8000000493b88165 pmd:e9cc01067 page:ffffea00124ee200 count:0 mapcount:-1 mapping: (null) index:0x0 page flags: 0x2ffc0000000014(referenced|dirty) addr:00007f97eea74000 vm_flags:00100071 anon_vma:ffff880e98f80380 mapping: (null) index:7f97eea74 CPU: 4 PID: 587 Comm: vsftpd Not tainted 3.12.7-1-ec2 #1 Call Trace: dump_stack+0x45/0x56 print_bad_pte+0x22e/0x250 unmap_single_vma+0x583/0x890 unmap_vmas+0x65/0x90 exit_mmap+0xc5/0x170 mmput+0x65/0x100 do_exit+0x393/0x9e0 do_group_exit+0xcc/0x140 SyS_exit_group+0x14/0x20 system_call_fastpath+0x1a/0x1f Disabling lock debugging due to kernel taint BUG: Bad rss-counter state mm:ffff880e9ca60580 idx:0 val:-1 BUG: Bad rss-counter state mm:ffff880e9ca60580 idx:1 val:1 The issue could not be reproduced under an HVM instance with the same kernel, so it appears to be exclusive to paravirtual Xen guests. He bisected the problem to commit 1667918b ("mm: numa: clear numa hinting information on mprotect") that was also included in 3.12-stable. The problem was related to how xen translates ptes because it was not accounting for the _PAGE_NUMA bit. This patch splits pte_present to add a pteval_present helper for use by xen so both bare metal and xen use the same code when checking if a PTE is present. [mgorman@suse.de: wrote changelog, proposed minor modifications] [akpm@linux-foundation.org: fix typo in comment] Reported-by:Steven Noonan <steven@uplinklabs.net> Tested-by:
Elena Ufimtseva <ufimtseva@gmail.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by:
-
David Rientjes authored
Commit c65c1877 ("slub: use lockdep_assert_held") incorrectly required that add_full() and remove_full() hold n->list_lock. The lock is only taken when kmem_cache_debug(s), since that's the only time it actually does anything. Require that the lock only be taken under such a condition. Reported-by:
Larry Finger <Larry.Finger@lwfinger.net> Tested-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by:
-
Geert Uytterhoeven authored
drivers/md/bcache/extents.c: In function `btree_ptr_bad_expensive': drivers/md/bcache/extents.c:196: warning: format `%li' expects type `long int', but argument 4 has type `size_t' Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kent Overstreet <kmo@daterainc.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by:
-
Greg Pearson authored
Currently, update_note_header_size_elf64() and update_note_header_size_elf32() will add the size of a PT_NOTE entry to real_sz even if that causes real_sz to exceeds max_sz. This patch corrects the while loop logic in those routines to ensure that does not happen and prints a warning if a PT_NOTE entry is dropped. If zero PT_NOTE entries are found or this condition is encountered because the only entry was dropped, a warning is printed and an error is returned. One possible negative side effect of exceeding the max_sz limit is an allocation failure in merge_note_headers_elf64() or merge_note_headers_elf32() which would produce console output such as the following while booting the crash kernel. vmalloc: allocation failure: 14076997632 bytes swapper/0: page allocation failure: order:0, mode:0x80d2 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-gbp1 #7 Call Trace: dump_stack+0x19/0x1b warn_alloc_failed+0xf0/0x160 __vmalloc_node_range+0x19e/0x250 vmalloc_user+0x4c/0x70 merge_note_headers_elf64.constprop.9+0x116/0x24a vmcore_init+0x2d4/0x76c do_one_initcall+0xe2/0x190 kernel_init_freeable+0x17c/0x207 kernel_init+0xe/0x180 ret_from_fork+0x7c/0xb0 Kdump: vmcore not initialized kdump: dump target is /dev/sda4 kdump: saving to /sysroot//var/crash/127.0.0.1-2014.01.28-13:58:52/ kdump: saving vmcore-dmesg.txt Cannot open /proc/vmcore: No such file or directory kdump: saving vmcore-dmesg.txt failed kdump: saving vmcore kdump: saving vmcore failed This type of failure has been seen on a four socket prototype system with certain memory configurations. Most PT_NOTE sections have a single entry similar to: n_namesz = 0x5 n_descsz = 0x150 n_type = 0x1 Occasionally, a second entry is encountered with very large n_namesz and n_descsz sizes: n_namesz = 0x80000008 n_descsz = 0x510ae163 n_type = 0x80000008 Not yet sure of the source of these extra entries, they seem bogus, but they shouldn't cause crash dump to fail. Signed-off-by:Greg Pearson <greg.pearson@hp.com> Acked-by:
Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Alexey Khoroshilov authored
i2o_cfg_compat_ioctl(I2OGETIOPS) locks i2o_cfg_mutex and then calls i2o_cfg_ioctl(I2OGETIOPS) that locks i2o_cfg_mutex as well. A deadlock is guaranteed. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Henrik Austad authored
Some of the 00-INDEX files are somewhat outdated and some folders does not contain 00-INDEX at all. Only outdated (with the notably exception of spi) indexes are touched here, the 169 folders without 00-INDEX has not been touched. New 00-INDEX - spi/* was added in a series of commits dating back to 2006 Added files (missing in (*/)00-INDEX) - dmatest.txt was added by commit 851b7e16 ("dmatest: run test via debugfs") - this_cpu_ops.txt was added by commit a1b2a555 ("percpu: add documentation on this_cpu operations") - ww-mutex-design.txt was added by commit 040a0a37 ("mutex: Add support for wound/wait style locks") - bcache.txt was added by commit cafe5635 ("bcache: A block layer cache") - kernel-per-CPU-kthreads.txt was added by commit 49717cb4 ("kthread: Document ways of reducing OS jitter due to per-CPU kthreads") - phy.txt was added by commit ff764963 ("drivers: phy: add generic PHY framework") - block/null_blk was added by commit 12f8f4fc ("null_blk: documentation") - module-signing.txt was added by commit 3cafea30 ("Add Documentation/module-signing.txt file") - assoc_array.txt was added by commit 3cb98950 ("Add a generic associative array implementation.") - arm/IXP4xx was part of the initial repo - arm/cluster-pm-race-avoidance.txt was added by commit 7fe31d28 ("ARM: mcpm: introduce helpers for platform coherency exit/setup") - arm/firmware.txt was added by commit 7366b92a ("ARM: Add interface for registering and calling firmware-specific operations") - arm/kernel_mode_neon.txt was added by commit 2afd0a05 ("ARM: 7825/1: document the use of NEON in kernel mode") - arm/tcm.txt was added by commit bc581770 ("ARM: 5580/2: ARM TCM (Tightly-Coupled Memory) support v3") - arm/vlocks.txt was added by commit 9762f12d ("ARM: mcpm: Add baremetal voting mutexes") - blackfin/gptimers-example.c, Makefile was added by commit 4b60779d ("Blackfin: add an example showing how to use the gptimers API") - devicetree/usage-model.txt was added by commit 31134efc ("dt: Linux DT usage model documentation") - fb/api.txt was added by commit fb21c2f4 ("fbdev: Add FOURCC-based format configuration API") - fb/sm501.txt was added by commit e6a04980 ("video, sm501: add edid and commandline support") - fb/udlfb.txt was added by commit 96f8d864 ("fbdev: move udlfb out of staging.") - filesystems/Makefile was added by commit 1e0051ae ("Documentation/fs/: split txt and source files") - filesystems/nfs/nfsd-admin-interfaces.txt was added by commit 8a4c6e19 ("nfsd: document kernel interfaces for nfsd configuration") - ide/warm-plug-howto.txt was added by commit f74c9141 ("ide: add warm-plug support for IDE devices (take 2)") - laptops/Makefile was added by commit d49129ac ("Documentation/laptop/: split txt and source files") - leds/leds-blinkm.txt was added by commit b54cf35a ("LEDS: add BlinkM RGB LED driver, documentation and update MAINTAINERS") - leds/ledtrig-oneshot.txt was added by commit 5e417281 ("leds: add oneshot trigger") - leds/ledtrig-transient.txt was added by commit 44e1e9f8 ("leds: add new transient trigger for one shot timer activation") - m68k/README.buddha was part of the initial repo - networking/LICENSE.(qla3xxx|qlcnic|qlge) was added by commits 40839129, c4e84bde, 5a4faa87 - networking/Makefile was added by commit 3794f3e8 ("docsrc: build Documentation/ sources") - networking/i40evf.txt was added by commit 105bf2fe ("i40evf: add driver to kernel build system") - networking/ipsec.txt was added by commit b3c6efbc ("xfrm: Add file to document IPsec corner case") - networking/mac80211-auth-assoc-deauth.txt was added by commit 3cd7920a ("mac80211: add auth/assoc/deauth flow diagram") - networking/netlink_mmap.txt was added by commit 5683264c ("netlink: add documentation for memory mapped I/O") - networking/nf_conntrack-sysctl.txt was added by commit c9f9e0e1 ("netfilter: doc: add nf_conntrack sysctl api documentation") lan) - networking/team.txt was added by commit 3d249d4c ("net: introduce ethernet teaming device") - networking/vxlan.txt was added by commit d342894c ("vxlan: virtual extensible lan") - power/runtime_pm.txt was added by commit 5e928f77 ("PM: Introduce core framework for run-time PM of I/O devices (rev. 17)") - power/charger-manager.txt was added by commit 3bb3dbbd ("power_supply: Add initial Charger-Manager driver") - RCU/lockdep-splat.txt was added by commit d7bd2d68 ("rcu: Document interpretation of RCU-lockdep splats") - s390/kvm.txt was added by 5ecee4ba (KVM: s390: API documentation) - s390/qeth.txt was added by commit b4d72c08 ("qeth: bridgeport support - basic control") - scheduler/sched-bwc.txt was added by commit 88ebc08e ("sched: Add documentation for bandwidth control") - scsi/advansys.txt was added by commit 4bd6d7f3 ("[SCSI] advansys: Move documentation to Documentation/scsi") - scsi/bfa.txt was added by commit 1ec90174 ("[SCSI] bfa: add readme file") - scsi/bnx2fc.txt was added by commit 12b8fc10 ("[SCSI] bnx2fc: Add driver documentation") - scsi/cxgb3i.txt was added by commit c3673464 ("[SCSI] cxgb3i: Add cxgb3i iSCSI driver.") - scsi/hpsa.txt was added by commit 992ebcf1 ("[SCSI] hpsa: Add hpsa.txt to Documentation/scsi") - scsi/link_power_management_policy.txt was added by commit ca77329f ("[libata] Link power management infrastructure") - scsi/osd.txt was added by commit 78e0c621 ("[SCSI] osd: Documentation for OSD library") - scsi/scsi-parameter.txt was created/moved by commit 163475fb ("Documentation: move SCSI parameters to their own text file") - serial/driver was part of the initial repo - serial/n_gsm.txt was added by commit 323e8412 ("n_gsm: add a documentation") - timers/Makefile was added by commit 3794f3e8 ("docsrc: build Documentation/ sources") - virt/kvm/s390.txt was added by commit d9101fca ("KVM: s390: diagnose call documentation") - vm/split_page_table_lock was added by commit 49076ec2 ("mm: dynamically allocate page->ptl if it cannot be embedded to struct page") - w1/slaves/w1_ds28e04 was added by commit fbf7f7b4 ("w1: Add 1-wire slave device driver for DS28E04-100") - w1/masters/omap-hdq was added by commit e0a29382 ("hdq: documentation for OMAP HDQ") - x86/early-microcode.txt was added by commit 0d91ea86 ("x86, doc: Documentation for early microcode loading") - x86/earlyprintk.txt was added by commit a1aade47 ("x86/doc: mini-howto for using earlyprintk=dbgp") - x86/entry_64.txt was added by commit 8b4777a4 ("x86-64: Document some of entry_64.S") - x86/pat.txt was added by commit d27554d8 ("x86: PAT documentation") Moved files - arm/kernel_user_helpers.txt was moved out of arch/arm/kernel by commit 37b83046 ("ARM: kuser: move interface documentation out of the source code") - efi-stub.txt was moved out of x86/ and down into Documentation/ in commit 4172fe2f ("EFI stub documentation updates") - laptops/hpfall.c was moved out of hwmon/ and into laptops/ in commit efcfed9b ("Move hp_accel to drivers/platform/x86") - commit 5616c23a ("x86: doc: move x86-generic documentation from Doc/x86/i386"): * x86/usb-legacy-support.txt * x86/boot.txt * x86/zero_page.txt - power/video_extension.txt was moved to acpi in commit 70e66e4d ("ACPI / video: move video_extension.txt to Documentation/acpi") Removed files (left in 00-INDEX) - memory.txt was removed by commit 00ea8990 ("memory.txt: remove stray information") - gpio.txt was moved to gpio/ in commit fd8e198c ("Documentation: gpiolib: document new interface") - networking/DLINK.txt was removed by commit 168e06ae ("drivers/net: delete old parallel port de600/de620 drivers") - serial/hayes-esp.txt was removed by commit f53a2ade ("tty: esp: remove broken driver") - s390/TAPE was removed by commit 9e280f66 ("[S390] remove tape block docu") - vm/locking was removed by commit 57ea8171 ("mm: documentation: remove hopelessly out-of-date locking doc") - laptops/acer-wmi.txt was remvoed by commit 02003667 ("acer-wmi: Delete out-of-date documentation") Typos/misc issues - rpc-server-gss.txt was added as knfsd-rpcgss.txt in commit 030d794b ("SUNRPC: Use gssproxy upcall for server RPCGSS authentication.") - commit b88cf73d ("net: add missing entries to Documentation/networking/00-INDEX") * generic-hdlc.txt was added as generic_hdlc.txt * spider_net.txt was added as spider-net.txt - w1/master/mxc-w1 was added as mxc_w1 by commit a5fd9139 ("w1: add 1-wire master driver for i.MX27 / i.MX31") - s390/zfcpdump.txt was added as zfcpdump by commit 6920c12a ("[S390] Add Documentation/s390/00-INDEX.") Signed-off-by:
Henrik Austad <henrik@austad.us> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [rcu bits] Acked-by:
Rob Landley <rob@landley.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Mark Brown <broonie@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Gleb Natapov <gleb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Len Brown <len.brown@intel.com> Cc: James Bottomley <JBottomley@parallels.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Signed-off-by:
-
Richard Genoud authored
Since git v1.7.7, the .git directory can be a file when, for example, the kernel is a submodule of another git super project. So, the check "-d .git" is not working anymore in this case. Using a more generic check like "-e .git" corrects this behaviour. Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Richard Genoud authored
Since git v1.7.7, the .git directory can be a file when, for example, the kernel is a submodule of another git super project. So, the check "-d .git" is not working anymore in this case. Using a more generic check like "-e .git" corrects this behaviour. Signed-off-by:
-
Dan Carpenter authored
I was reviewing this and noticed that unlocking should be conditional on the error path. I've changed it to unlock and return directly since we only do it once and it seems unlikely to change in the near future. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Dimitri Sivanich <sivanich@sgi.com> Signed-off-by:
-
- 10 Feb, 2014 5 commits
-
-
John Ogness authored
Commit 46d3ceab ("tcp: TCP Small Queues") introduced a possible regression for applications using TCP_NODELAY. If TCP session is throttled because of tsq, we should consult tp->nonagle when TX completion is done and allow us to send additional segment, especially if this segment is not a full MSS. Otherwise this segment is sent after an RTO. [edumazet] : Cooked the changelog, added another fix about testing sk_wmem_alloc twice because TX completion can happen right before setting TSQ_THROTTLED bit. This problem is particularly visible with recent auto corking, but might also be triggered with low tcp_limit_output_bytes values or NIC drivers delaying TX completion by hundred of usec, and very low rtt. Thomas Glanzmann for example reported an iscsi regression, caused by tcp auto corking making this bug quite visible. Fixes: 46d3ceab ("tcp: TCP Small Queues") Signed-off-by:
John Ogness <john.ogness@linutronix.de> Signed-off-by:
Thomas Glanzmann <thomas@glanzmann.de> Signed-off-by:
-
David S. Miller authored
Toshiaki Makita says: ==================== bridge: Fix corner case problems around local fdb entries There are so many corner cases that are not handled properly around local fdb entries. - We might fail to delete the old entry and might delete an arbitrary local entry when changing mac address of a bridge port. - We always fail to delete the old entry when changing mac address of the bridge device. - We might incorrectly delete a necessary entry when detaching a bridge port. - We might incorrectly delete a necessary entry when deleting a vlan. and so on. This is a patch series to fix these issues. v3: - Handle NTF_USE case in patch 1/9, commented by Vlad Yasevich. - Tested port detach/attach and didn't find any problem with patch 5/9, suggested by Stephen Hemminger. - Add comments about possible inconsistent state in current implementation into commit log of patch 5/9, found by the above test. - Reword unintensive changelog of patch 7/9, commented by Vlad Yasevich. v2: - Change the way to find the old entry in br_fdb_changeaddr() from memorizing previous port address to introducing a new flag indicating whether a fdb entry is added by user or not, commented by Stephen Hemminger. - Add a fix for the way to insert a new address in br_fdb_changeaddr(). - Prevent creating an entry such that its dst is NULL in br_add_if() to preserve old behavior, commented by Vlad Yasevich. - Add more comments about slight behavior change, where the bridge device come to be able to receive traffic to an address it has during short window, to changelogs, commented by Vlad Yasevich. - Add a fix for possible race in br_fdb_change_mac_address(). ==================== Signed-off-by: -
Toshiaki Makita authored
br_fdb_change_mac_address() calls fdb_insert()/fdb_delete() without br->hash_lock. These hash list updates are racy with br_fdb_update()/br_fdb_cleanup(). Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by:
Vlad Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Toshiaki Makita authored
Vlan codes unconditionally delete local fdb entries. We should consider the possibility that other ports have the same address and vlan. Example of problematic case: ip link set eth0 address 12:34:56:78:90:ab ip link set eth1 address aa:bb:cc:dd:ee:ff brctl addif br0 eth0 brctl addif br0 eth1 # br0 will have mac address 12:34:56:78:90:ab bridge vlan add dev eth0 vid 10 bridge vlan add dev eth1 vid 10 bridge vlan add dev br0 vid 10 self We will have fdb entry such that f->dst == eth0, f->vlan_id == 10 and f->addr == 12:34:56:78:90:ab at this time. Next, delete eth0 vlan 10. bridge vlan del dev eth0 vid 10 In this case, we still need the entry for br0, but it will be deleted. Note that br0 needs the entry even though its mac address is not set manually. To delete the entry with proper condition checking, fdb_delete_local() is suitable to use. Signed-off-by:
-
Toshiaki Makita authored
br_fdb_delete_by_port() doesn't care about vlan and mac address of the bridge device. As the check is almost the same as mac address changing, slightly modify fdb_delete_local() and use it. Note that we can always set added_by_user to 0 in fdb_delete_local() because - br_fdb_delete_by_port() calls fdb_delete_local() for local entries regardless of its added_by_user. In this case, we have to check if another port has the same address and vlan, and if found, we have to create the entry (by changing dst). This is kernel-added entry, not user-added. - br_fdb_changeaddr() doesn't call fdb_delete_local() for user-added entry. Signed-off-by:
-
