Currently sja1105_compose_gating_subschedule is not prepared to be
called for the case where we want to recompute the global tc-gate
configuration after we've deleted those actions on a port.

After deleting the tc-gate actions on the last port, max_cycle_time
would become zero, and that would incorrectly prevent
sja1105_free_gating_config from getting called.

So move the freeing function above the check for the need to apply a new
configuration.

Fixes: 834f8933 ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It turns out that sja1105_compose_gating_subschedule must also be called
from sja1105_vl_delete, to recalculate the overall tc-gate
configuration. Currently this is not possible without introducing a
forward declaration. So move the function at the top of the file, along
with its dependencies.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

DMA buffers were not freed on failure path of at91ether_open().
Along with changes for freeing the DMA buffers the enable/disable
interrupt instructions were moved to at91ether_start()/at91ether_stop()
functions and the operations on at91ether_stop() were done in
their reverse order (compared with how is done in at91ether_start()):
before this patch the operation order on interface open path
was as follows:
1/ alloc DMA buffers
2/ enable tx, rx
3/ enable interrupts
and the order on interface close path was as follows:
1/ disable tx, rx
2/ disable interrupts
3/ free dma buffers.

Fixes: 7897b071 ("net: macb: convert to phylink")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Call pm_runtime_put_sync() on failure path of at91ether_open.

Fixes: e6a41c23 ("net: macb: ensure interface is not suspended on at91rm9200")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net, they are:

1) Unaligned atomic access in ipset, from Russell King.

2) Missing module description, from Rob Gill.

3) Patches to fix a module unload causing NULL pointer dereference in
   xtables, from David Wilder. For the record, I posting here his cover
   letter explaining the problem:

    A crash happened on ppc64le when running ltp network tests triggered by
    "rmmod iptable_mangle".

    See previous discussion in this thread:
    https://lists.openwall.net/netdev/2020/06/03/161 .

    In the crash I found in iptable_mangle_hook() that
    state->net->ipv4.iptable_mangle=NULL causing a NULL pointer dereference.
    net->ipv4.iptable_mangle is set to NULL in +iptable_mangle_net_exit() and
    called when ip_mangle modules is unloaded. A rmmod task was found running
    in the crash dump.  A 2nd crash showed the same problem when running
    "rmmod iptable_filter" (net->ipv4.iptable_filter=NULL).

    To fix this I added .pre_exit hook in all iptable_foo.c. The pre_exit will
    un-register the underlying hook and exit would do the table freeing. The
    netns core does an unconditional +synchronize_rcu after the pre_exit hooks
    insuring no packets are in flight that have picked up the pointer before
    completing the un-register.

    These patches include changes for both iptables and ip6tables.

    We tested this fix with ltp running iptables01.sh and iptables01.sh -6 a
    loop for 72 hours.

4) Add a selftest for conntrack helper assignment, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The eth_addr member is passed to ether_addr functions that require
2-byte alignment, therefore the member must be properly aligned
to avoid unaligned accesses.

The problem is in place since the initial merge of multicast to unicast:
commit 6db6f0ea bridge: multicast to unicast

Fixes: 6db6f0ea ("bridge: multicast to unicast")
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Thomas Martitz <t.martitz@avm.de>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

there is a problem with the CWR flag set in an incoming ACK segment
and it leads to the situation when the ECE flag is latched forever

the following packetdrill script shows what happens:

// Stack receives incoming segments with CE set
+0.1 <[ect0]  . 11001:12001(1000) ack 1001 win 65535
+0.0 <[ce]    . 12001:13001(1000) ack 1001 win 65535
+0.0 <[ect0] P. 13001:14001(1000) ack 1001 win 65535

// Stack repsonds with ECN ECHO
+0.0 >[noecn]  . 1001:1001(0) ack 12001
+0.0 >[noecn] E. 1001:1001(0) ack 13001
+0.0 >[noecn] E. 1001:1001(0) ack 14001

// Write a packet
+0.1 write(3, ..., 1000) = 1000
+0.0 >[ect0] PE. 1001:2001(1000) ack 14001

// Pure ACK received
+0.01 <[noecn] W. 14001:14001(0) ack 2001 win 65535

// Since CWR was sent, this packet should NOT have ECE set

+0.1 write(3, ..., 1000) = 1000
+0.0 >[ect0]  P. 2001:3001(1000) ack 14001
// but Linux will still keep ECE latched here, with packetdrill
// flagging a missing ECE flag, expecting
// >[ect0] PE. 2001:3001(1000) ack 14001
// in the script

In the situation above we will continue to send ECN ECHO packets
and trigger the peer to reduce the congestion window. To avoid that
we can check CWR on pure ACKs received.

v3:
- Add a sequence check to avoid sending an ACK to an ACK

v2:
- Adjusted the comment
- move CWR check before checking for unacknowledged packets
Signed-off-by: Denis Kirjanov <denis.kirjanov@suse.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The skcipher API dynamically instantiates the transformation object
on request that implements the requested algorithm optimally on the
given platform. This notion of optimality only matters for cases like
bulk network or disk encryption, where performance can be a bottleneck,
or in cases where the algorithm itself is not known at compile time.

In the mscc case, we are dealing with AES encryption of a single
block, and so neither concern applies, and we are better off using
the AES library interface, which is lightweight and safe for this
kind of use.

Note that the scatterlist API does not permit references to buffers
that are located on the stack, so the existing code is incorrect in
any case, but avoiding the skcipher and scatterlist APIs entirely is
the most straight-forward approach to fixing this.

Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Fixes: 28c5107a ("net: phy: mscc: macsec support")
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Doug Berger says:

====================
net: bcmgenet: use hardware padding of runt frames

Now that scatter-gather and tx-checksumming are enabled by default
it revealed a packet corruption issue that can occur for very short
fragmented packets.

When padding these frames to the minimum length it is possible for
the non-linear (fragment) data to be added to the end of the linear
header in an SKB. Since the number of fragments is read before the
padding and used afterward without reloading, the fragment that
should have been consumed can be tacked on in place of part of the
padding.

The third commit in this set corrects this by removing the software
padding and allowing the hardware to add the pad bytes if necessary.

The first two commits resolve warnings observed by the kbuild test
robot and are included here for simplicity of application.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When commit 474ea9ca ("net: bcmgenet: correctly pad short
packets") added the call to skb_padto() it should have been
located before the nr_frags parameter was read since that value
could be changed when padding packets with lengths between 55
and 59 bytes (inclusive).

The use of a stale nr_frags value can cause corruption of the
pad data when tx-scatter-gather is enabled. This corruption of
the pad can cause invalid checksum computation when hardware
offload of tx-checksum is also enabled.

Since the original reason for the padding was corrected by
commit 7dd39913 ("net: bcmgenet: fix skb_len in
bcmgenet_xmit_single()") we can remove the software padding all
together and make use of hardware padding of short frames as
long as the hardware also always appends the FCS value to the
frame.

Fixes: 474ea9ca ("net: bcmgenet: correctly pad short packets")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 16-bit value that holds a short in network byte order should
be declared as a restricted big endian type to allow type checks
to succeed during assignment.

Fixes: 3e370952 ("net: bcmgenet: add support for ethtool rxnfc flows")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function was originally removed by Baoyou Xie in
commit e2072600 ("net: bcmgenet: remove unused function in
bcmgenet.c") to prevent a build warning.

Some of the functions removed by Baoyou Xie are now used for
WAKE_FILTER support so his commit was reverted, but this function
is still unused and the kbuild test robot dutifully reported the
warning.

This commit once again removes the remaining unused hfb functions.

Fixes: 14da1510 ("Revert "net: bcmgenet: remove unused function in bcmgenet.c"")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

check that 'nft ... ct helper set <foo>' works:
 1. configure ftp helper via nft and assign it to
    connections on port 2121
 2. check with 'conntrack -L' that the next connection
    has the ftp helper attached to it.

Also add a test for auto-assign (old behaviour).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Using new helpers ip6t_unregister_table_pre_exit() and
ip6t_unregister_table_exit().

Fixes: b9e69e12 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The pre_exit will un-register the underlying hook and .exit will do
the table freeing. The netns core does an unconditional synchronize_rcu
after the pre_exit hooks insuring no packets are in flight that have
picked up the pointer before completing the un-register.

Fixes: b9e69e12 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Using new helpers ipt_unregister_table_pre_exit() and
ipt_unregister_table_exit().

Fixes: b9e69e12 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The pre_exit will un-register the underlying hook and .exit will do the
table freeing. The netns core does an unconditional synchronize_rcu after
the pre_exit hooks insuring no packets are in flight that have picked up
the pointer before completing the un-register.

Fixes: b9e69e12 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The user tool modinfo is used to get information on kernel modules, including a
description where it is available.

This patch adds a brief MODULE_DESCRIPTION to netfilter kernel modules
(descriptions taken from Kconfig file or code comments)
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

When using ip_set with counters and comment, traffic causes the kernel
to panic on 32-bit ARM:

Alignment trap: not handling instruction e1b82f9f at [<bf01b0dc>]
Unhandled fault: alignment exception (0x221) at 0xea08133c
PC is at ip_set_match_extensions+0xe0/0x224 [ip_set]

The problem occurs when we try to update the 64-bit counters - the
faulting address above is not 64-bit aligned.  The problem occurs
due to the way elements are allocated, for example:

	set->dsize = ip_set_elem_len(set, tb, 0, 0);
	map = ip_set_alloc(sizeof(*map) + elements * set->dsize);

If the element has a requirement for a member to be 64-bit aligned,
and set->dsize is not a multiple of 8, but is a multiple of four,
then every odd numbered elements will be misaligned - and hitting
an atomic64_add() on that element will cause the kernel to panic.

ip_set_elem_len() must return a size that is rounded to the maximum
alignment of any extension field stored in the element.  This change
ensures that is the case.

Fixes: 95ad1f4a ("netfilter: ipset: Fix extension alignment")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The error DBG_STATUS_NO_MATCHING_FRAMING_MODE was added to the enum
enum dbg_status however there is a missing corresponding entry for
this in the array s_status_str. This causes an out-of-bounds read when
indexing into the last entry of s_status_str.  Fix this by adding in
the missing entry.

Addresses-Coverity: ("Out-of-bounds read").
Fixes: 2d22bc83 ("qed: FW 8.42.2.0 debug features")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jisheng Zhang says:

====================
net: phy: call phy_disable_interrupts() in phy_init_hw()

We face an issue with rtl8211f, a pin is shared between INTB and PMEB,
and the PHY Register Accessible Interrupt is enabled by default, so
the INTB/PMEB pin is always active in polling mode case.

As Heiner pointed out "I was thinking about calling
phy_disable_interrupts() in phy_init_hw(), to have a defined init
state as we don't know in which state the PHY is if the PHY driver is
loaded. We shouldn't assume that it's the chip power-on defaults, BIOS
or boot loader could have changed this. Or in case of dual-boot
systems the other OS could leave the PHY in whatever state."

patch1 makes phy_disable_interrupts() non-static so that it could be used
in phy_init_hw() to have a defined init state.

patch2 calls phy_disable_interrupts() in phy_init_hw() to have a
defined init state.

Since v3:
  - call phy_disable_interrupts() have interrupts disabled first then
    config_init, thank Florian

Since v2:
  - Don't export phy_disable_interrupts() but just make it non-static

Since v1:
  - EXPORT the correct symbol
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Call phy_disable_interrupts() in phy_init_hw() to "have a defined init
state as we don't know in which state the PHY is if the PHY driver is
loaded. We shouldn't assume that it's the chip power-on defaults, BIOS
or boot loader could have changed this. Or in case of dual-boot
systems the other OS could leave the PHY in whatever state." as pointed
out by Heiner.
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We face an issue with rtl8211f, a pin is shared between INTB and PMEB,
and the PHY Register Accessible Interrupt is enabled by default, so
the INTB/PMEB pin is always active in polling mode case.

As Heiner pointed out "I was thinking about calling
phy_disable_interrupts() in phy_init_hw(), to have a defined init
state as we don't know in which state the PHY is if the PHY driver is
loaded. We shouldn't assume that it's the chip power-on defaults, BIOS
or boot loader could have changed this. Or in case of dual-boot
systems the other OS could leave the PHY in whatever state."

Make phy_disable_interrupts() non-static so that it could be used in
phy_init_hw() to have a defined init state.
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When writing the serdes configuration register was moved to
mvneta_config_interface() the whole code block was removed from
mvneta_port_power_up() in the assumption that its only purpose was to
write the serdes configuration register. As mentioned by Russell King
its purpose was also to check for valid interface modes early so that
later in the driver we do not have to care for unexpected interface
modes.
Add back the test to let the driver bail out early on unhandled
interface modes.

Fixes: b4748553 ("net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

In mvneta_config_interface() the RGMII modes are catched by the default
case which is an error return. The RGMII modes are valid modes for the
driver, so instead of returning an error add a break statement to return
successfully.

This avoids this warning for non comphy SoCs which use RGMII, like
SolidRun Clearfog:

WARNING: CPU: 0 PID: 268 at drivers/net/ethernet/marvell/mvneta.c:3512 mvneta_start_dev+0x220/0x23c

Fixes: b4748553 ("net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver for Marvell switches puts all ports in IGMP snooping mode
which results in all IGMP/MLD frames that ingress on the ports to be
forwarded to the CPU only.

The bridge code in the kernel can then interpret these frames and act
upon them, for instance by updating the mdb in the switch to reflect
multicast memberships of stations connected to the ports. However,
the IGMP/MLD frames must then also be forwarded to other ports of the
bridge so external IGMP queriers can track membership reports, and
external multicast clients can receive query reports from foreign IGMP
queriers.

Currently, this is impossible as the EDSA tagger sets offload_fwd_mark
on the skb when it unwraps the tagged frames, and that will make the
switchdev layer prevent the skb from egressing on any other port of
the same switch.

To fix that, look at the To_CPU code in the DSA header and make
forwarding of the frame possible for trapped IGMP packets.

Introduce some #defines for the frame types to make the code a bit more
comprehensive.

This was tested on a Marvell 88E6352 variant.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

ovs connection tracking module performs de-fragmentation on incoming
fragmented traffic. Take info account if traffic has been de-fragmented
in execute_check_pkt_len action otherwise we will perform the wrong
nested action considering the original packet size. This issue typically
occurs if ovs-vswitchd adds a rule in the pipeline that requires connection
tracking (e.g. OVN stateful ACLs) before execute_check_pkt_len action.
Moreover take into account GSO fragment size for GSO packet in
execute_check_pkt_len routine

Fixes: 4d5ec89f ("net: openvswitch: Add a new action check_pkt_len")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Russell King says:

====================
Two phylink pause fixes

While testing, I discovered two issues with ethtool -A with phylink.
First, if there is a PHY bound to the network device, we hit a
deadlock when phylib tries to notify us of the link changing as a
result of triggering a renegotiation.

Second, when we are manually forcing the pause settings, and there
is no renegotiation triggered, we do not update the MAC via the new
mac_link_up approach.

These two patches solve both problems, and will need to be backported
to v5.7; they do not apply cleanly there due to the introduction of
PCS in the v5.8 merge window.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We have been relying on link events and mac_config() when the manual
pause modes are changed.  With recent developments, such as moving
the programming of link state to mac_link_up(), this no longer works.

To ensure that we update the MAC, we must generate a link-down followed
by a link-up event; we can do that by setting mac_link_dropped and
triggering a resolve.

Fixes: 91a208f2 ("net: phylink: propagate resolved link config via mac_link_up()")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a phylink's ethtool set_pauseparam support deadlock caused by phylib
interacting with phylink: we must not hold the state lock while calling
phylib functions that may call into phylink_phy_change().

Fixes: f904f15e ("net: phylink: allow ethtool -A to change flow control advertisement")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clearing the sock TX queue in sk_set_socket() might cause unexpected
out-of-order transmit when called from sock_orphan(), as outstanding
packets can pick a different TX queue and bypass the ones already queued.

This is undesired in general. More specifically, it breaks the in-order
scheduling property guarantee for device-offloaded TLS sockets.

Remove the call to sk_tx_queue_clear() in sk_set_socket(), and add it
explicitly only where needed.

Fixes: e022f0b4 ("net: Introduce sk_tx_queue_mapping")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A last minute change put the TDR cable test parameters into a nest.
The validation is not sufficient, resulting in an oops if the nest is
missing. Set default values first, then update them if the nest is
provided.

Fixes: f2bc8ad3 ("net: ethtool: Allow PHY cable test TDR data to configured")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Bug fixes.

The first patch stores the firmware version code which is needed by the
next 2 patches to determine some worarounds based on the firmware version.
The workarounds are to disable legacy TX push mode and to clear the
hardware statistics during ifdown.  The last patch checks that it is
a PF before reading the VPD.

Please also queue these for -stable.  Thanks.
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Virtual functions does not have VPD information. This patch modifies
calling bnxt_read_vpd_info() only for PFs and avoids an unnecessary
error log.

Fixes: a0d0fd70 ("bnxt_en: Read partno and serialno of the board from VPD")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On older firmware, the hardware statistics are not cleared when the
driver frees the hardware stats contexts during ifdown.  The driver
expects these stats to be cleared and saves a copy before freeing
the stats contexts.  During the next ifup, the driver will likely
allocate the same hardware stats contexts and this will cause a big
increase in the counters as the old counters are added back to the
saved counters.

We fix it by making an additional firmware call to clear the counters
before freeing the hw stats contexts when the firmware is the older
20.x firmware.

Fixes: b8875ca3 ("bnxt_en: Save ring statistics before reset.")
Reported-by: Jakub Kicinski <kicinski@fb.com>
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Tested-by: Jakub Kicinski <kicinski@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Older firmware may not support legacy TX push properly and may not
be disabling it.  So we check certain firmware versions that may
have this problem and disable legacy TX push unconditionally.

Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We currently only store the firmware version as a string for ethtool
and devlink info.  Store it also as a version code.  The next 2
patches will need to check the firmware major version to determine
some workarounds.

We also use the 16-bit firmware version fields if the firmware is newer
and provides the 16-bit fields.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rahul Lakkireddy says:

====================
cxgb4/cxgb4vf: fix warnings reported by sparse

This series of patches fix various warnings reported by the sparse
tool.

Patches 1 and 2 fix lock context imbalance warnings.

Patch 3 fixes cast to restricted __be64 warning when fetching
timestamp in PTP path.

Patch 4 fixes several cast to restricted __be32 warnings in TC-U32
offload parser.

Patch 5 fixes several cast from restricted __be16 warnings in parsing
L4 ports for filters.

Patch 6 fixes several restricted __be32 degrades to integer warnings
when comparing IP address masks for exact-match filters.

Patch 7 fixes cast to restricted __be64 warning when fetching SGE
queue contexts in device dump collection.

Patch 8 fixes cast from restricted __sum16 warning when saving IPv4
partial checksum.

Patch 9 fixes issue with string array scope in DCB path.

Patch 10 fixes a set but unused variable warning when DCB is disabled.

Patch 11 fixes several kernel-doc comment warnings in cxgb4 driver.

Patch 12 fixes several kernel-doc comment warnings in cxgb4vf driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Update several kernel-doc line comments to fix warnings reported by
make W=1.

Fixes following class of warnings reported by make W=1 in several
places:
cxgb4vf_main.c:275: warning: Function parameter or member 'persistent'
not described in 'cxgb4vf_change_mac'
cxgb4vf_main.c:275: warning: Excess function parameter 'persist'
description in 'cxgb4vf_change_mac'

Fixes: 16f8bd4b ("cxgb4vf: Add core T4 PCI-E SR-IOV Virtual Function hardware definitions and device communication code")
Fixes: c6e0d914 ("cxgb4vf: Add T4 Virtual Function Scatter-Gather Engine DMA code")
Fixes: e0a8b34a ("cxgb4vf: Add and initialize some sge params for VF driver")
Fixes: c3168cab ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities")
Fixes: 0e23daeb ("drivers/net: chelsio/cxgb*: Convert timers to use timer_setup()")
Fixes: 3f8cfd0d ("cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update several kernel-doc line comments to fix warnings reported by
make W=1.

Fixes following class of warnings reported by make W=1 in several
places:
l2t.c:616: warning: Cannot understand  * @dev: net_device pointer
t4_hw.c:3175: warning: Function parameter or member 'adap' not
described in 't4_get_exprom_version'
t4_hw.c:3175: warning: Excess function parameter 'adapter' description
in 't4_get_exprom_version'

Fixes: 56d36be4 ("cxgb4: Add HW and FW support code")
Fixes: fd3a4790 ("cxgb4: Add packet queues and packet DMA code")
Fixes: 26f7cbc0 ("cxgb4: Don't attempt to upgrade T4 firmware when cxgb4 will end up as a slave")
Fixes: 793dad94 ("RDMA/cxgb4: Fix bug for active and passive LE hash collision path")
Fixes: ba3f8cd5 ("cxgb4: Add support in cxgb4 to get expansion rom version via ethtool")
Fixes: f7502659 ("cxgb4: Add API to alloc l2t entry; also update existing ones")
Fixes: ddc7740d ("cxgb4: Decode link down reason code obtained from firmware")
Fixes: 193c4c28 ("cxgb4: Update T6 Buffer Group and Channel Mappings")
Fixes: 8f46d467 ("cxgb4: Use Firmware params to get buffer-group map")
Fixes: a4569504 ("cxgb4: time stamping interface for PTP")
Fixes: 9c33e420 ("cxgb4: Add PTP Hardware Clock (PHC) support")
Fixes: c3168cab ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities")
Fixes: 5ccf9d04 ("cxgb4: update API for TP indirect register access")
Fixes: 3bdb376e ("cxgb4: introduce SMT ops to prepare for SMAC rewrite support")
Fixes: 736c3b94 ("cxgb4: collect egress and ingress SGE queue contexts")
Fixes: f56ec676 ("cxgb4: Add support for ethtool i2c dump")
Fixes: 9d5fd927 ("cxgb4/cxgb4vf: add support for ndo_set_vf_vlan")
Fixes: 98f3697f ("cxgb4: add tc flower match support for tunnel VNI")
Fixes: 02d805dc ("cxgb4: use new fw interface to get the VIN and smt index")
Fixes: 3f8cfd0d ("cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()")
Fixes: d429005f ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer")
Fixes: 0e395b3c ("cxgb4: add FLOWC based QoS offload")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>