Skip to content

L
linux
Switch branch/tag
  1. 20 Oct, 2017 15 commits
  3. 19 Oct, 2017 3 commits
    • Phil Reid's avatar
      gpio: mcp23s08: add support for mcp23018 · ff0f2ce7
      Phil Reid authored 
      This adds the required definitions for the mcp23018 which is the i2c
variant of the mcp23s18.
Signed-off-by: default avatarPhil Reid <preid@electromag.com.au>
Reviewed-by: default avatarSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      ff0f2ce7
    • Linus Walleij's avatar
      blackfin: Fix local <asm/gpio.h> includes · 350bdb84
      Linus Walleij authored 
      When making the pin control submenu globally visible, all kinds
of oddities appear, in blackfin a few files were #including
<linux/gpio.h> and relying on that to pull in <asm/gpio.h>.

This was not working when pin control but not GPIOLIB was
selected resulting in a breakage in allmodconfig. The code these
files were using was still there and defined in <asm/gpio.h>
just not pulle in from just including <linux/gpio.h>

Simply add the required includes explicitly in the blackfin
kernel core and everything compiles fine.

Delete the use of the incorrect <linux/gpio.h> where possible.

Add stubs to <asm/gpio.h> for the functions called from PM:
these should probably also depend on !PINCTRL but since the
global CONFIG_PM symbol is used to compile PM support,
we need some more intrusive thing here, to be tested by
Blackfin maintainers.

Cc: Steven Miao <realmz6@gmail.com>
Cc: Huanhuan Feng <huanhuan.feng@analog.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      350bdb84
    • Linus Walleij's avatar
      pinctrl: adi2: Fix Kconfig build problem · 1c363531
      Linus Walleij authored 
      The build robot is complaining on Blackfin:

drivers/pinctrl/pinctrl-adi2.c: In function 'port_setup':
>> drivers/pinctrl/pinctrl-adi2.c:221:21: error: dereferencing
   pointer to incomplete type 'struct gpio_port_t'
      writew(readw(&regs->port_fer) & ~BIT(offset),
                        ^~
drivers/pinctrl/pinctrl-adi2.c: In function 'adi_gpio_ack_irq':
>> drivers/pinctrl/pinctrl-adi2.c:266:18: error: dereferencing
pointer to incomplete type 'struct bfin_pint_regs'
      if (readl(&regs->invert_set) & pintbit)
                     ^~
It seems the driver need to include <asm/gpio.h> and <asm/irq.h>
to compile.

The Blackfin architecture was re-defining the Kconfig
PINCTRL symbol which is not OK, so replaced this with
PINCTRL_BLACKFIN_ADI2 which selects PINCTRL and PINCTRL_ADI2
just like most arches do.

Further, the old GPIO driver symbol GPIO_ADI was possible to
select at the same time as selecting PINCTRL. This was not
working because the arch-local <asm/gpio.h> header contains
an explicit #ifndef PINCTRL clause making compilation break
if you combine them. The same is true for DEBUG_MMRS.

Make sure the ADI2 pinctrl driver is not selected at the same
time as the old GPIO implementation. (This should be converted
to use gpiolib or pincontrol and move to drivers/...) Also make
sure the old GPIO_ADI driver or DEBUG_MMRS is not selected at
the same time as the new PINCTRL implementation, and only make
PINCTRL_ADI2 selectable for the Blackfin families that actually
have it.

This way it is still possible to add e.g. I2C-based pin
control expanders on the Blackfin.

Cc: Steven Miao <realmz6@gmail.com>
Cc: Huanhuan Feng <huanhuan.feng@analog.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      1c363531
  5. 17 Oct, 2017 1 commit
  7. 16 Oct, 2017 5 commits
  9. 14 Oct, 2017 1 commit
  11. 12 Oct, 2017 1 commit
  13. 11 Oct, 2017 14 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7