- 06 Feb, 2017 2 commits
-
-
Johannes Berg authored
Instead of setting the tx_cmd length in the mvm code, which is complicated by the fact that DQA may want to temporarily store the SKB on the side, adjust the length in the PCIe code which also knows about this since it's responsible for duplicating all those headers that are account for in this code. As the PCIe code already relies on the tx_cmd->len field, this doesn't really introduce any new dependencies. To make this possible we need to move the memcpy() of the TX command until after it was updated. This does even simplify the code though, since the PCIe code already does a lot of manipulations to build A-MSDUs correctly and changing the length becomes a simple operation to see how much was added/removed, rather than predicting it. Fixes: 24afba76 ("iwlwifi: mvm: support bss dynamic alloc/dealloc of queues") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Johannes Berg authored
We don't really need clear the skb's status area nor store the dev_cmd into it until we really commit to the frame by handing it to the transport - defer those operations until just before we do that. This doesn't entirely fix the bug with frames not getting sent out after having been deferred due to DQA, because it doesn't restore the info->driver_data[0] place that was already set to zero (or another value) by the A-MSDU logic. Fixes: 24afba76 ("iwlwifi: mvm: support bss dynamic alloc/dealloc of queues") Signed-off-by:
-
- 03 Feb, 2017 13 commits
-
-
Johannes Berg authored
The firmware will soon actually look at the AID field, and when it does that it'll try to ensure that the AID is never changing. Due to the way the station is added, it may start with an invalid AID before it's associated, so to ensure a constant AID (once it becomes non-zero), track the station state and set the AID only when the station is associated and when it disassociates. Signed-off-by:
-
Johannes Berg authored
This fixes a long-standing bug that was introduced when this code was introduced: cfg80211 passes a pointer, but we treat it as if it was passing a value. The result is that we pass the pointer to the firmware, instead of the value. It's not clear how this could ever have worked, unless the firmware is ignoring this value. Signed-off-by:
-
Sara Sharon authored
When driver needs to access the contents of a streaming DMA buffer without unmapping it it should call dma_sync_single_for_cpu(). Once the call has been made, the CPU "owns" the DMA buffer and can work with it as needed. Before the device accesses the buffer, however, ownership should be transferred back to it with dma_sync_single_for_device(). Both calls weren't performed by the driver, resulting with odd paging errors on some platforms. Fix it. Fixes: a6c4fb44 ("iwlwifi: mvm: Add FW paging mechanism for the UMAC on PCI") Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
-
Sara Sharon authored
Support getting alive from two LMACs and dumping debug data from both. Deprecate older alive notifications no one is using. Signed-off-by:
-
Johannes Berg authored
There's already a variable with the result in scope, use that. Signed-off-by:
-
Sara Sharon authored
If iwl_mvm_find_free_queue() doesn't find a free queue, it will return an inactive one. However, not all the call paths free this queue before reassigning it, which is a bug. Check it in other paths and act accordingly. Fixes: 9794c64f ("iwlwifi: mvm: support dqa queue inactivation upon timeout") Signed-off-by:
-
Sara Sharon authored
For CDB devices we will want to configure scan parameters per band. Support the new scan API for now. Logic per band will be added in the future. Signed-off-by:
-
Sara Sharon authored
For CDB arch there is another auxiliary mac. Support statistics APIs that were changed to reflect that. Signed-off-by:
-
Sara Sharon authored
Currently we have up to 3 phy contexts - defined by NUM_PHY_CTX. However - some code paths validate the ID by using MAX_PHYS define which is set to 4. While there is no harm it is incorrect - since the maximum is 3. Remove the define and use the correct one. Cleanup the code a bit while at it. Signed-off-by:
-
Beni Lev authored
Since offchannel activity doesn't always require a BSS, e.g. ANQP sessions, offchannel frames should not use the BSS queue, because it might not be initialized. Use the auxilary queue instead Fixes: e3118ad7 ("iwlwifi: mvm: support tdls in dqa mode") Signed-off-by:
Beni Lev <beni.lev@intel.com> Signed-off-by:
-
Golan Ben-Ami authored
Add to the v1 of the mfuart loading notification, the size of the mfuart image, and write it to dmesg once the notification is received. Signed-off-by:
Golan Ben-Ami <golan.ben.ami@intel.com> Signed-off-by:
-
Sara Sharon authored
For a000 devices the INIT and RT images are unified to one image. The changes in the flow are the following: * Driver load only RT firmware - meaning that the nvm access command will be done in the RT image load flow. * A new command (NVM_ACCESS_COMPLETE) now signals to the FW that the driver is done accessing the NVM and FW can proceed with phy calibrations. * Phy DB is no longer sent from INIT FW to be restored by driver for the RT FW - all the phy DB is now internal to the FW. INIT complete will now follow the NVM access command, without phy DB calls before. * Paging command is sent earlier in the flow before NVM access to enable a complete load of FW. * caution must be care when restart is called since we may have not completed init flow even though we are in RT firmware. Signed-off-by:
-
Emmanuel Grumbach authored
We added the uAPSD enabled ACs and that made the firmware choose to pull frames with uAPSD trigger frames instead of PS-Poll. Fix that. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
- 02 Feb, 2017 2 commits
-
-
Rafał Miłecki authored
It's important to inform user so he knows things went wrong. He may also want to get memory dump for further debugging purposes. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Acked-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Rafał Miłecki authored
This method may be unsupported (see: USB bus) or may just fail (see: SDIO bus). While at it rework logic in brcmf_sdio_bus_get_memdump function to avoid too many conditional code nesting levels. Signed-off-by:
-
- 01 Feb, 2017 15 commits
-
-
Rafał Miłecki authored
This extra BCM54612E code in PHY driver isn't really aneg specific. Even without it aneg works OK but the problem is no packets pass through PHY. Moreover putting this code inside config_aneg callback didn't allow resuming PHY correctly. When driver called phy_stop and phy_start it was putting PHY machine into RESUMING state. After that machine was switching into AN and NOLINK without ever calling phy_start_aneg. This prevented this extra setup from being called and PHY didn't work. This change has been verified to fix network on BCM47186B0 SoC device with BCM54612E. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Yotam Gigi says: ==================== net/sched: act_sample: Little fixes Little fixes in sample tc action. ==================== Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Yotam Gigi authored
The ASSERT_RTNL is not necessary in the init function, as it does not touch any rtnl protected structures, as opposed to the mirred action which does have to hold a net device. Reported-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Yotam Gigi <yotamg@mellanox.com> Signed-off-by:
-
Yotam Gigi authored
Fix error path of in sample init, by releasing the tc hash in case of failure in psample_group creation. Fixes: 5c5670fa ("net/sched: Introduce sample tc action") Reported-by:
-
David S. Miller authored
Niklas Söderlund says: ==================== sh_eth: fixes for MagicPacket handling This series contain two fixes for MagicPacket handling. It's based on top of net-next and is tested on Koelsch. ==================== Signed-off-by: -
Niklas Söderlund authored
If a link change interrupt happens along side the MagicPacket interrupt and the link change interrupt is ignored the interrupt handler will return and the wakeup event is not registered. Fix this by moving the MagicPacket check before the link change check. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reported-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by:
-
Niklas Söderlund authored
To be consistent with the rest of the driver when setting bits using sh_eth_modify() the same bit should also be cleared. This have no functional change and should have been done from the start. Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2017-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.11 It's nice to see rt2x00 development has becoming active, for example adding support for a new chip version. Also wcn36xx has been converted to use the recently merged QCOM_SMD subsystem. Otherwise new features and fixes it lots of drivers. Major changes: iwlwifi * some more work in preparation for A000 family support * add support for radiotap timestamps * some work on our firmware debugging capabilities wcn36xx * convert to a proper QCOM_SMD driver (from the platform_driver interface) ath10k * VHT160 support * dump Copy Engine registers during firmware crash * search board file extension from SMBIOS wil6210 * add disable_ap_sme module parameter rt2x00 * support RT3352 with external PA * support for RT3352 with 20MHz crystal * add support for RT5350 WiSoC brcmfmac * add support for BCM43455 sdio device rtl8xxxu * add support for D-Link DWA-131 rev E1, TP-Link TL-WN822N v4 and others ==================== Signed-off-by:
-
Dan Carpenter authored
dma_mapping_error() returns 1 if there is an error and 0 if not. Fixes: 018423e9 ("net: ethernet: aquantia: Add ring support code") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Satanand Burla authored
Flush the mmio writes before releasing spin locks. if the maintained counts get too high > 2M force writeback of the counts to clear them Signed-off-by:
Satanand Burla <satananda.burla@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by:
Derek Chickles <derek.chickles@cavium.com> Signed-off-by:
-
David Ahern authored
IPv6 does not set the NLM_F_APPEND flag in notifications to signal that a NEWROUTE is an append versus a new route or a replaced one. Add the flag if the request has it. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Grygorii Strashko authored
In switch mode on struct cpsw_slave->ndev field will be initialized with proper value only for the one cpsw slave port, as result cpsw_get_usage_count() will generate "Unable to handle kernel NULL pointer dereference" exception when first ethernet interface is opening cpsw_ndo_open(). This issue causes boot regression on AM335x EVM and reproducible on am57xx-evm (switch mode). Fix it by adding additional check for !cpsw->slaves[i].ndev in cpsw_get_usage_count(). Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Fixes: 03fd01ad ("net: ethernet: ti: cpsw: don't duplicate ndev_running") Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by:
-
Eric Dumazet authored
Dmitry reported warnings occurring in __skb_gso_segment() [1] All SKB_GSO_DODGY producers can allow user space to feed packets that trigger the current check. We could prevent them from doing so, rejecting packets, but this might add regressions to existing programs. It turns out our SKB_GSO_DODGY handlers properly set up checksum information that is needed anyway when packets needs to be segmented. By checking again skb_needs_check() after skb_mac_gso_segment(), we should remove these pesky warnings, at a very minor cost. With help from Willem de Bruijn [1] WARNING: CPU: 1 PID: 6768 at net/core/dev.c:2439 skb_warn_bad_offload+0x2af/0x390 net/core/dev.c:2434 lo: caps=(0x000000a2803b7c69, 0x0000000000000000) len=138 data_len=0 gso_size=15883 gso_type=4 ip_summed=0 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 6768 Comm: syz-executor1 Not tainted 4.9.0 #5 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ffff8801c063ecd8 ffffffff82346bdf ffffffff00000001 1ffff100380c7d2e ffffed00380c7d26 0000000041b58ab3 ffffffff84b37e38 ffffffff823468f1 ffffffff84820740 ffffffff84f289c0 dffffc0000000000 ffff8801c063ee20 Call Trace: [<ffffffff82346bdf>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffffff82346bdf>] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 [<ffffffff81827e34>] panic+0x1fb/0x412 kernel/panic.c:179 [<ffffffff8141f704>] __warn+0x1c4/0x1e0 kernel/panic.c:542 [<ffffffff8141f7e5>] warn_slowpath_fmt+0xc5/0x100 kernel/panic.c:565 [<ffffffff8356cbaf>] skb_warn_bad_offload+0x2af/0x390 net/core/dev.c:2434 [<ffffffff83585cd2>] __skb_gso_segment+0x482/0x780 net/core/dev.c:2706 [<ffffffff83586f19>] skb_gso_segment include/linux/netdevice.h:3985 [inline] [<ffffffff83586f19>] validate_xmit_skb+0x5c9/0xc20 net/core/dev.c:2969 [<ffffffff835892bb>] __dev_queue_xmit+0xe6b/0x1e70 net/core/dev.c:3383 [<ffffffff8358a2d7>] dev_queue_xmit+0x17/0x20 net/core/dev.c:3424 [<ffffffff83ad161d>] packet_snd net/packet/af_packet.c:2930 [inline] [<ffffffff83ad161d>] packet_sendmsg+0x32ed/0x4d30 net/packet/af_packet.c:2955 [<ffffffff834f0aaa>] sock_sendmsg_nosec net/socket.c:621 [inline] [<ffffffff834f0aaa>] sock_sendmsg+0xca/0x110 net/socket.c:631 [<ffffffff834f329a>] ___sys_sendmsg+0x8fa/0x9f0 net/socket.c:1954 [<ffffffff834f5e58>] __sys_sendmsg+0x138/0x300 net/socket.c:1988 [<ffffffff834f604d>] SYSC_sendmsg net/socket.c:1999 [inline] [<ffffffff834f604d>] SyS_sendmsg+0x2d/0x50 net/socket.c:1995 [<ffffffff84371941>] entry_SYSCALL_64_fastpath+0x1f/0xc2 Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Theuns Verwoerd authored
Allow a master interface to be specified as one of the parameters when creating a new interface via rtnl_newlink. Previously this would require invoking interface creation, waiting for it to complete, and then separately binding that new interface to a master. In particular, this is used when creating a macvlan child interface for VRRP in a VRF configuration, allowing the interface creator to specify directly what master interface should be inherited by the child, without having to deal with asynchronous complications and potential race conditions. Signed-off-by:
Theuns Verwoerd <theuns.verwoerd@alliedtelesis.co.nz> Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2017-02-01 1) Some typo fixes, from Alexander Alemayhu. 2) Don't acquire state lock in get_mtu functions. The only rece against a dead state does not matter. From Florian Westphal. 3) Remove xfrm4_state_fini, it is unused for more than 10 years. From Florian Westphal. 4) Various rcu usage improvements. From Florian Westphal. 5) Properly handle crypto arrors in ah4/ah6. From Gilad Ben-Yossef. 6) Try to avoid skb linearization in esp4 and esp6. 7) The esp trailer is now set up in different places, add a helper for this. 8) With the upcomming usage of gro_cells in IPsec, a gro merged skb can have a secpath. Drop it before freeing or reusing the skb. 9) Add a xfrm dummy network device for napi. With this we can use gro_cells from within xfrm, it allows IPsec GRO without impact on the generic networking code. Please pull or let me know if there are problems. ==================== Signed-off-by:
-
- 31 Jan, 2017 8 commits
-
-
David S. Miller authored
Rafał Miłecki says: ==================== net-next: use one struct bgmac & add PHY support This patchset adds support for initializing PHY using PHY subsystem. It's required e.g. for wireless access point devices that use bgmac supported Ethernet device connected to some external PHY. Implementing this required accessing phydev in bcma specific code which wasn't possible with core code allocating struct bgmac on its own. This is why I needed to modify alloc_etherdev usage first. ==================== Signed-off-by: -
Rafał Miłecki authored
This adds support for using bgmac with PHYs supported by standalone PHY drivers. Having any PHY initialization in bgmac is hacky and shouldn't be extended but rather removed if anyone has hardware to test it. Signed-off-by:
-
Rafał Miłecki authored
Adding struct bcma_mdio was a workaround for bcma code not having access to the struct bgmac used in the core code. Now we don't duplicate this struct we can just use it internally in bcma code. This simplifies code & allows access to all bgmac driver details from all places in bcma code. Signed-off-by:
-
Rafał Miłecki authored
So far were were allocating struct bgmac in 3 places: platform code, bcma code and shared bgmac_enet_probe function. The reason for this was bgmac_enet_probe: 1) Requiring early-filled struct bgmac 2) Calling alloc_etherdev on its own in order to use netdev_priv later This solution got few drawbacks: 1) Was duplicating allocating code 2) Required copying early-filled struct 3) Resulted in platform/bcma code having access only to unused struct Solve this situation by simply extracting some probe code into the new bgmac_alloc function. Signed-off-by:
-
Florian Fainelli authored
Commit 7318166c ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc") added a new object to build: bcm_sf2_cfp.o, but in doing so, we essentially just built this object and no longer bcm_sf2.o. Fix this by creating a module named bcm-sf2.ko which links in bcm_sf2.o and bcm_sf2_cfp.o. Fixes: 7318166c ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc") Signed-off-by:
-
Ganesh Goudar authored
Change t4fw_version.h to update latest firmware version number 1.16.26.0. Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Alexei Starovoitov authored
under memory pressure 'ethtool -S' command may warn: [ 2374.385195] ethtool: page allocation failure: order:4, mode:0x242c0c0 [ 2374.405573] CPU: 12 PID: 40211 Comm: ethtool Not tainted [ 2374.423071] Call Trace: [ 2374.423076] [<ffffffff8148cb29>] dump_stack+0x4d/0x64 [ 2374.423080] [<ffffffff811667cb>] warn_alloc_failed+0xeb/0x150 [ 2374.423082] [<ffffffff81169cd3>] ? __alloc_pages_direct_compact+0x43/0xf0 [ 2374.423084] [<ffffffff8116a25c>] __alloc_pages_nodemask+0x4dc/0xbf0 [ 2374.423091] [<ffffffffa0023dc2>] ? cmd_exec+0x722/0xcd0 [mlx5_core] [ 2374.423095] [<ffffffff811b3dcc>] alloc_pages_current+0x8c/0x110 [ 2374.423097] [<ffffffff81168859>] alloc_kmem_pages+0x19/0x90 [ 2374.423099] [<ffffffff81186e5e>] kmalloc_order_trace+0x2e/0xe0 [ 2374.423101] [<ffffffff811c0084>] __kmalloc+0x204/0x220 [ 2374.423105] [<ffffffff816c269e>] dev_ethtool+0xe4e/0x1f80 [ 2374.423106] [<ffffffff816b967e>] ? dev_get_by_name_rcu+0x5e/0x80 [ 2374.423108] [<ffffffff816d6926>] dev_ioctl+0x156/0x560 [ 2374.423111] [<ffffffff811d4c68>] ? mem_cgroup_commit_charge+0x78/0x3c0 [ 2374.423117] [<ffffffff8169d542>] sock_do_ioctl+0x42/0x50 [ 2374.423119] [<ffffffff8169d9c3>] sock_ioctl+0x1b3/0x250 [ 2374.423121] [<ffffffff811f0f42>] do_vfs_ioctl+0x92/0x580 [ 2374.423123] [<ffffffff8100222b>] ? do_audit_syscall_entry+0x4b/0x70 [ 2374.423124] [<ffffffff8100287c>] ? syscall_trace_enter_phase1+0xfc/0x120 [ 2374.423126] [<ffffffff811f14a9>] SyS_ioctl+0x79/0x90 [ 2374.423127] [<ffffffff81002bb0>] do_syscall_64+0x50/0xa0 [ 2374.423129] [<ffffffff817e19bc>] entry_SYSCALL64_slow_path+0x25/0x25 ~1160 mlx5 counters ~= order 4 allocation which is unlikely to succeed under memory pressure. Convert them to vzalloc() as ethtool_get_regs() does. Also take care of drivers without counters similar to commit 67ae7cf1 ("ethtool: Allow zero-length register dumps again") and reduce warn_on to warn_on_once. Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:Philippe Reynes <tremyfr@gmail.com> Tested-by:
Pavel Belous <pavel.s.belous@gmail.com> Signed-off-by:
-
