- 05 Mar, 2013 40 commits
-
-
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
All fields after 'type' are already zeroed by the core framework. Clearing the full struct also clears 'type', which causes a wrong type value to be returned. Signed-off-by:
-
Hans Verkuil authored
Just set the field value based on the chosen format. It's either INTERLACED or TOP. Signed-off-by:
-
Hans Verkuil authored
Set priv field of struct v4l2_pix_format to 0 and fill in colorspace. Signed-off-by:
-
Hans Verkuil authored
Instead of comparing against STD_NTSC and STD_PAL compare against 60 and 50 Hz formats. That's what you really want. When the standard is changed, make sure the width and height of the format are also updated to reflect the current standard. Also replace the deprecated current_norm by the g_std ioctl. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
The use of the V4L2_CID_JPEG_COMPRESSION_QUALITY control is recommended over the G/S_JPEGCOMP ioctls. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Setting the frequency would unmute the card. Fixed the mute handling in the s_frequency code. Signed-off-by:
-
Hans Verkuil authored
The device_caps and capabilities fields were swapped. Signed-off-by:
-
Theodore Kilgore authored
Instead use v4l2_dbg and v4l2_err. Note that the PDEBUG macro is kept to make this patch-set less invasive, but it is simply a wrapper around v4l2_dbg now. Most of the other changes are there to make the dev parameter for the v4l2_xxx macros available everywhere we do logging. Signed-off-by:
Theodore Kilgore <kilgota@auburn.edu> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
-
Hans de Goede authored
Now that sonixj.c has been converted to the control framework it is no longer used. Signed-off-by:
-
Hans Verkuil authored
We forgot to remove that when sonixb was converted to the control framework. Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Sachin Kamat authored
This patch adds device tree based discovery support to the G2D driver. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Ensure the driver gets always at least its minimum required number of buffers allocated by checking actual number of allocated buffers in vb2_reqbufs(). And free any partially allocated buffer queue with signaling an error to user space. Without this patch applications may wait forever to dequeue a filled buffer, because the hardware didn't even start after VIDIOC_STREAMON, VIDIOC_QBUF calls, due to insufficient number of empty buffers. Reported-by:
Alexander Nestorov <alexandernst@gmail.com> Signed-off-by:
Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by:
-
Kamil Debski authored
Not all drivers use monotonic timestamps. This patch adds a way to set the timestamp type per every queue. In addition, set proper timestamp type in drivers that I am sure that use either MONOTONIC or COPY timestamps. Other drivers will correctly report UNKNOWN timestamp type instead of assuming that all drivers use monotonic timestamps. Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by:
-
Kamil Debski authored
Define video buffer flag for the COPY timestamp. In this case the timestamp value is copied from the OUTPUT to the corresponding CAPTURE buffer. Signed-off-by:
-
Hans Verkuil authored
The spec specifies that setting count to 0 in v4l2_requestbuffers should result in releasing any streaming resources and the stream ownership. Implement this. Signed-off-by:
Arvydas Sidorenko <asido4@gmail.com> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
This makes it possible to switch to unlocked_ioctl. Signed-off-by:
-
Hans Verkuil authored
The priv field should be set to 0. In this case the driver abused the priv field for internal housekeeping. Modify the code so priv is no longer used for that purpose. Signed-off-by:
-
Hans Verkuil authored
Add device_caps support to querycap, fill in bus_info correctly and do not set the version field (let the core handle that). Also simplify the s_input ioctl. Signed-off-by:
-
Hans Verkuil authored
Also correct the first_init static: this should be part of the stk_camera struct. Signed-off-by:
-
Hans Verkuil authored
file->private_data is needed to store the pointer to struct v4l2_fh. So use video_drvdata to get hold of the stk_camera struct. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
It's a webcam, the STD API is not applicable to webcams. Signed-off-by:
-
Hans Verkuil authored
And add an extensive comment relating the history of the upside-down handling in this driver. Signed-off-by:
-
Hans Verkuil authored
Tested on my big-endian ppc-based test machine. Signed-off-by:
-
Hans Verkuil authored
Tested on my big-endian ppc-based test machine. Signed-off-by:
-
Hans Verkuil authored
It's not working reliably if port 3 is enabled. Signed-off-by:
-
Hans Verkuil authored
The last set width/height must be preserved as per the spec. Signed-off-by:
-
Hans Verkuil authored
The 417 support doesn't work. Until someone can dig into this driver to figure out why it isn't working the 417 support is disabled. Sometimes you can actually stream a bit, but very soon the whole machine crashes, so something is seriously wrong. For the record, this was not introduced by my recent changes to this driver, it was broken before that. Signed-off-by:
-
Hans Verkuil authored
The prefix is generated automatically, so no need to provide it again. Signed-off-by:
-
