- 03 Feb, 2017 12 commits
-
-
Dan Carpenter authored
The check assumes that we end on zero but actually we end on -1. Change the post-op to a pre-op so that we do end on zero. Techinically now we only loop 499 times instead of 500 but that's fine. Fixes: dc12b124 ("[media] media: ti-vpe: vpdma: Add abort channel desc and cleanup APIs") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Benoit Parrot <bparrot@ti.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Shailendra Verma authored
Fix to avoid possible memory leak if the decoder initialization got failed. Free the allocated memory for file handle object before return in case decoder initialization fails. Signed-off-by:
Shailendra Verma <shailendra.v@samsung.com> Signed-off-by:
-
Arnd Bergmann authored
The FE_SUPPORTED() macro is basically the same as IS_REACHABLE, except that it causes a warning with gcc-7: common/b2c2/flexcop-fe-tuner.c:30:1: error: this use of "defined" may not be portable [-Werror=expansion-to-defined] common/b2c2/flexcop-fe-tuner.c:30:1: error: this use of "defined" may not be portable [-Werror=expansion-to-defined] common/b2c2/flexcop-fe-tuner.c:30:1: error: this use of "defined" may not be portable [-Werror=expansion-to-defined] Using IS_REACHABLE() to define it avoids the warning. Fixes: 3785bc17 ("[media] b2c2: break it into common/pci/usb directories") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
changeset da8ec560 ("[media] ivtv: implement new decoder command ioctls") implemented proper support for mpeg audio and video control at V4L2 API. Since then, the usage of the the DVB APIs is deprecated. However, we never actually marked it as deprecated nor provided any way to disable it. Let's do it now. This patch prepares for the removal of this bad usage on a couple of Kernel versions. Fixes: da8ec560 ("[media] ivtv: implement new decoder command ioctls") Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Antti Palosaari authored
Remove unused demod driver. Device that used it never went public. If someone later decide to add support for a device using this chipset, it should be easy enough to retrieve it from git history. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
I saw from ZyDAS ZD1301 sniffs it sets chip sleeping by using REG_MISC_CTRL. That has very huge effect for power management, around 0.9W. Sleep is still disabled for all the old hardware just to avoid possible regression as meaning of register bits are unknown. I tested it also with some other devices and it seems to be working, but I still consider it to be too risky to change it default. Signed-off-by:
-
Antti Palosaari authored
DVB USB interface driver for ZyDAS ZD1301 chip. Signed-off-by:
-
Antti Palosaari authored
ZyDAS ZD1301 is chip having USB interface and DVB-T demodulator integrated. This driver is for USB interface part. Device has USB ID 0ace:13a1. Used tuner is MT2060. Signed-off-by:
-
Antti Palosaari authored
DVB-T demodulator driver for ZyDAS ZD1301 chip. Signed-off-by:
-
Antti Palosaari authored
ZyDAS ZD1301 is chip having USB interface and DVB-T demodulator integrated. This driver is for demodulator part. Driver is very reduced, just basic demodulator functionality, no statistics at all. It registers as a platform driver to driver core. Signed-off-by:
-
Antti Palosaari authored
Add configuration parameter to split long i2c writes as some I2C adapters cannot write 10 bytes used as a one go. Signed-off-by:
-
Antti Palosaari authored
Add proper i2c driver model bindings. Signed-off-by:
-
- 31 Jan, 2017 28 commits
-
-
Mauro Carvalho Chehab authored
pr_foo() provides a convenient way for printk's, enforcing that they'll all prepend the error message with the driver's name. Use it inside ivtv. Signed-off-by:
-
Mauro Carvalho Chehab authored
Move the pr_fmt() macro to ivtv_driver.h and ensure that it will be the first file to be included on all ivtv files. While here, put the includes inside ivtv-driver.h on alphabetic order. Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by gcc: drivers/media/platform/sti/hva/hva-v4l2.c:227:6: warning: no previous prototype for 'hva_dbg_summary' [-Wmissing-prototypes] void hva_dbg_summary(struct hva_ctx *ctx) ^~~~~~~~~~~~~~~ This function is used only internally, so make it static. Signed-off-by: -
Jean-Christophe Trotin authored
This patch creates 4 static debugfs entries to dump: - the device-related information ("st-hva/device") - the list of registered encoders ("st-hva/encoders") - the current values of the hva registers ("st-hva/regs") - the information about the last closed instance ("st-hva/last") It also creates dynamically a debugfs entry for each opened instance, ("st-hva/<instance identifier>") to dump: - the information about the frame (format, resolution) - the information about the stream (format, profile, level, resolution) - the control parameters (bitrate mode, framerate, GOP size...) - the potential (system, encoding...) errors - the performance information about the encoding (HW processing duration, average bitrate, average framerate...) Each time a running instance is closed, its context (including the debug information) is saved to feed, on demand, the last closed instance debugfs entry. Signed-off-by:Yannick Fertre <yannick.fertre@st.com> Acked-by:
Jean-Christophe Trotin <jean-christophe.trotin@st.com> Signed-off-by:
-
Jean-Christophe Trotin authored
This patch adds a short summary about the encoding operation at each instance closing, for debug purpose (through dev_dbg()): - information about the frame (format, resolution) - information about the stream (format, profile, level, resolution) - number of encoded frames - potential (system, encoding...) errors Signed-off-by:
-
Nicholas Mc Guire authored
ulseep_range() uses hrtimers and provides no advantage over msleep() for larger delays. Fix up the 25ms delays here to use msleep() and reduce the load on the hrtimer subsystem. Link: http://lkml.org/lkml/2017/1/11/377Reviwed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by:
-
Laurent Pinchart authored
The gpiod API checks for NULL descriptors, there's no need to duplicate the check in the driver. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Despite checkpatch comments, it seems that ARM doesn't like to use constified structs. As reported by kernel build robot: In file included from drivers/media/platform/coda/imx-vdoa.c:22:0: drivers/media/platform/coda/imx-vdoa.c: In function 'vdoa_driver_init': >> include/linux/device.h:1461:20: warning: passing argument 1 of '__platform_driver_register' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] return __register(&(__driver) , ##__VA_ARGS__); \ ^ include/linux/platform_device.h:198:29: note: in definition of macro 'platform_driver_register' __platform_driver_register(drv, THIS_MODULE) ^~~ include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver' module_driver(__platform_driver, platform_driver_register, \ ^~~~~~~~~~~~~ >> drivers/media/platform/coda/imx-vdoa.c:333:1: note: in expansion of macro 'module_platform_driver' module_platform_driver(vdoa_driver); ^~~~~~~~~~~~~~~~~~~~~~ include/linux/platform_device.h:199:12: note: expected 'struct platform_driver *' but argument is of type 'const struct platform_driver *' extern int __platform_driver_register(struct platform_driver *, ^~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/media/platform/coda/imx-vdoa.c:18:0: drivers/media/platform/coda/imx-vdoa.c: In function 'vdoa_driver_exit': >> include/linux/device.h:1466:15: warning: passing argument 1 of 'platform_driver_unregister' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] __unregister(&(__driver) , ##__VA_ARGS__); \ ^ include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver' module_driver(__platform_driver, platform_driver_register, \ ^~~~~~~~~~~~~ >> drivers/media/platform/coda/imx-vdoa.c:333:1: note: in expansion of macro 'module_platform_driver' module_platform_driver(vdoa_driver); ^~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/media/platform/coda/imx-vdoa.c:22:0: include/linux/platform_device.h:201:13: note: expected 'struct platform_driver *' but argument is of type 'const struct platform_driver *' extern void platform_driver_unregister(struct platform_driver *); ^~~~~~~~~~~~~~~~~~~~~~~~~~ So, let's just remove it. This reverts commit 126f52b0. Reported-by:kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Shailendra Verma authored
Both functions initialize the file handle with v4l2_fh_init() and thus need to call clean up with v4l2_fh_exit() as appropriate. Fix it. Signed-off-by:
-
Shailendra Verma authored
Both functions initialize the file handle with v4l2_fh_init() and thus need to call clean up with v4l2_fh_exit() as appropriate. Fix it. Signed-off-by:
-
Jaejoong Kim authored
The device driver should keep going even if debugfs initialization fails. So, change the return type to void. Signed-off-by:
Jaejoong Kim <climbbb.kim@gmail.com> Reviewed-by:
-
Guennadi Liakhovetski authored
Don't mix up UVC_BUF_STATE_* and VB2_BUF_STATE_* codes. Fixes: 6998b6fb ("[media] uvcvideo: Use videobuf2-vmalloc") Cc: stable@vger.kernel.org Signed-off-by:
Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Signed-off-by:
-
Guennadi Liakhovetski authored
Remove a superfluous assignment to a local variable at the end of a function. Signed-off-by:
-
Guennadi Liakhovetski authored
Add an inline function to obtain a struct uvc_buffer pointer from a struct vb2_v4l2_buffer one. Signed-off-by:
-
Antti Palosaari authored
Use formulas for cnr estimates and get rid of old lut-based estimate. Signed-off-by:
-
Antti Palosaari authored
Chip uses so called 8-bit i2c addresses, but on bus there is of course correct 7-bit addresses with rw bit as lsb - verified with oscilloscope. Lets still use correct addresses in driver. Signed-off-by:
-
Antti Palosaari authored
Driver supports 2 different device versions, AX and BX. Use device IDs to pass chip version information to driver. Signed-off-by:
-
Antti Palosaari authored
it913x tuner driver is changed to platform model so we need bind it using platform_device_register_data(). Also remove hacks from I2C adapter where fake tuner driver address (addr >> 1) were used as those are no longer needed. Signed-off-by:
-
Antti Palosaari authored
That tuner is integrated to demodulator and communicates via demodulators address space. We cannot register both demodulator and tuner having same address to same I2C bus, so better to change it platform driver in order to implement I2C adapter correctly. Signed-off-by:
-
Antti Palosaari authored
IT9130 series contains integrated tuner driver, which uses that demodulator address space. Return regmap in order to allow it913x driver communication. Signed-off-by:
-
Antti Palosaari authored
Fix coding style and other small issues. Signed-off-by:
-
Antti Palosaari authored
Replace Booth's binary division algo with 64-bit multiply and division. Fix related IF calculations. Signed-off-by:
-
Antti Palosaari authored
Use regmap to cover I2C register operations. Signed-off-by:
-
Antti Palosaari authored
Read eeprom content to chip state and read values there when needed. Also debug dump eeprom content. Signed-off-by:
-
Antti Palosaari authored
Implement DVBv5 UCB. Only uncorrected blocks are currently counted. Signed-off-by:
-
Antti Palosaari authored
Implement DVBv5 BER. Signed-off-by:
-
Pavel Machek authored
Mark and Sakari as maintainers for Nokia N900 camera pieces. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Pavel Machek authored
Add driver for et8ek8 sensor, found in Nokia N900 main camera. Can be used for taking photos in 2.5MP resolution with fcam-dev. Signed-off-by:
Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by:
-
