ABTS error completion can trigger an exchange cleanup from the driver and
another ABTS response will be generated.  This retry of ABTS response can
cause loop between driver trying to send ABTS and firmware returning error.

This patch fixes this issue by adding logic to check for unresolved exchanges
and clean up before ABTS is retried.  This patch also addes the fix to use the
same qpair as the ABTS completion for the terminatation of exchange as well as
retry of ABTS response.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

When driver detect CTIO_INVALID_RX_ID status for CTIO, print message with
correct information to help with debugging.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Move ATIO queue processing out of hardware_lock to prevent deadlock.

Fixes: 3bb67df5 ("qla2xxx: Check for online flag instead of active reset when transmitting responses")
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

For driver MBX submission, use mbox_busy to serialize request.  For Userspace
MBX submission, use optrom mutex to serialize request.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

When driver receive PLOGI/PRLI from FW, the WWPN value will be provided.  If
it is not, then driver will terminate it.  The WWPN allows driver to locate
the session or create a new session.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

For target mode, any chip reset triggered before target mode is enabled will
be held off until user is ready to enable.  This prevents the chip from
starting or running before it is intended.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

When switch responds with error for Get Port Speed Command (GPSC), driver
should not proceed with telling FW about the speed of the remote port.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

When all fabric scan retries fail, remove all RPorts, DMA resources for the
command. Otherwise we have stale Rports.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Turn ON logout_on_delete flag to make sure firmware resource for fcport is
cleaned up on ADISC error.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Turn off IOCB timeout timer on IOCB completion instead of turning it off in a
deferred task.  This prevent false alarm if the deferred task is stalled out.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Decrement login retry count only for plogi instead of number of attempts made
for login.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Currently, the rport registration is being called from a single work element
that is used to process QLA internal "work_list".  This work_list is meant for
quick and simple task (ie no sleep).  The Rport registration process sometime
can be delayed by upper layer.  This causes back pressure with the internal
queue where other jobs are unable to move forward.

This patch will schedule the registration process with a new work element
(fc_port.reg_work).  While the RPort is being registered, the current state of
the fcport will not move forward until the registration is done.  If the state
of the fabric has changed, a new field/next_disc_state will record the next
action on whether to 'DELETE' or 'Reverify the session/ADISC'.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Remove redundant check for fcport is deleted or being delete.  The same check
is already in the deletion routine.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Rename rscn_rcvd field to scan_needed to be more meaningful.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

On Abort of initiator scsi command, the abort needs to follow the same qpair
as the the scsi command to prevent out of order processing.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes: 6246b8a1 ("[SCSI] qla2xxx: Enhancements to support ISP83xx.")
Fixes: 1bb39548 ("qla2xxx: Correct iiDMA-update calling conventions.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This patch improves performance for 16G and above adapter by removing
additional call to process_response_queue().

[mkp: typo]

Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Bare-metal toolchains don't define __linux__, so aic7xxx build with
bare-metal toolchain is broken. This driver codebase used to be partially
shared with FreeBSD, but these days there is no point in keeping the
compatibility around. So let's just drop FreeBSD related code and get rid
of __linux__ checking in order to fix the build using bare-metal
toolchains.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

kmem_cache_destroy() can handle NULL pointer correctly, so there is no
need to check NULL pointer before calling kmem_cache_destroy()
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Smatch complains about this code:

    drivers/scsi/lpfc/lpfc_scsi.c:1053 lpfc_get_scsi_buf_s4()
    warn: variable dereferenced before check 'lpfc_cmd' (see line 1039)

Fortunately the NULL check isn't required so I have removed it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

'NEGOTIATION' was misspelled as 'NEGOTATION'. Fixed it. It is a coding
style change which should have no impact on runtime execution of code.
Signed-off-by: Faisal Mehmood <f.m3hm00d@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Variable dmsg is not being used and is redundant and hence can be
removed.

Cleans up clang warning:
warning: variable 'dmsg' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Variables dev and cpu are not being used and are redundant and hence can
be removed.

Cleans up clang warnings:
warning: variable 'dev' set but not used [-Wunused-but-set-variable]
warning: variable 'cpu' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

I ran into a new warning on randconfig kernels:

drivers/scsi/raid_class.c: In function 'raid_match':
drivers/scsi/raid_class.c:64:24: error: unused variable 'i' [-Werror=unused-variable]

This looks like a very old problem that for some reason was very hard to
run into, but it is very easy to fix, by replacing the incorrect #ifdef
with a simpler IS_ENABLED() check.

Fixes: fac829fd ("[SCSI] raid_attrs: fix dependency problems")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull timer update from Thomas Gleixner:
 "New defines for the compat time* types so they can be shared between
  32bit and 64bit builds. Not used yet, but merging them now allows the
  actual conversions to be merged through different maintainer trees
  without dependencies

  We still have compat interfaces for 32bit on 64bit even with the new
  2038 safe timespec/val variants because pointer size is different. And
  for the old style timespec/val interfaces we need yet another 'compat'
  interface for both 32bit native and 32bit on 64bit"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  y2038: Provide aliases for compat helpers

Pull IDA updates from Matthew Wilcox:
 "A better IDA API:

      id = ida_alloc(ida, GFP_xxx);
      ida_free(ida, id);

  rather than the cumbersome ida_simple_get(), ida_simple_remove().

  The new IDA API is similar to ida_simple_get() but better named.  The
  internal restructuring of the IDA code removes the bitmap
  preallocation nonsense.

  I hope the net -200 lines of code is convincing"

* 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits)
  ida: Change ida_get_new_above to return the id
  ida: Remove old API
  test_ida: check_ida_destroy and check_ida_alloc
  test_ida: Convert check_ida_conv to new API
  test_ida: Move ida_check_max
  test_ida: Move ida_check_leaf
  idr-test: Convert ida_check_nomem to new API
  ida: Start new test_ida module
  target/iscsi: Allocate session IDs from an IDA
  iscsi target: fix session creation failure handling
  drm/vmwgfx: Convert to new IDA API
  dmaengine: Convert to new IDA API
  ppc: Convert vas ID allocation to new IDA API
  media: Convert entity ID allocation to new IDA API
  ppc: Convert mmu context allocation to new IDA API
  Convert net_namespace to new IDA API
  cb710: Convert to new IDA API
  rsxx: Convert to new IDA API
  osd: Convert to new IDA API
  sd: Convert to new IDA API
  ...

Pull gcc plugin fix from Kees Cook:
 "Lift gcc test into Kconfig. This is for better behavior when the
  kernel is built with Clang, reported by Stefan Agner"

* tag 'gcc-plugins-v4.19-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  gcc-plugins: Disable when building under Clang

Pull perf updates from Thomas Gleixner:
 "Kernel:
   - Improve kallsyms coverage
   - Add x86 entry trampolines to kcore
   - Fix ARM SPE handling
   - Correct PPC event post processing

  Tools:
   - Make the build system more robust
   - Small fixes and enhancements all over the place
   - Update kernel ABI header copies
   - Preparatory work for converting libtraceevnt to a shared library
   - License cleanups"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
  tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy'
  tools arch x86: Update tools's copy of cpufeatures.h
  perf python: Fix pyrf_evlist__read_on_cpu() interface
  perf mmap: Store real cpu number in 'struct perf_mmap'
  perf tools: Remove ext from struct kmod_path
  perf tools: Add gzip_is_compressed function
  perf tools: Add lzma_is_compressed function
  perf tools: Add is_compressed callback to compressions array
  perf tools: Move the temp file processing into decompress_kmodule
  perf tools: Use compression id in decompress_kmodule()
  perf tools: Store compression id into struct dso
  perf tools: Add compression id into 'struct kmod_path'
  perf tools: Make is_supported_compression() static
  perf tools: Make decompress_to_file() function static
  perf tools: Get rid of dso__needs_decompress() call in __open_dso()
  perf tools: Get rid of dso__needs_decompress() call in symbol__disassemble()
  perf tools: Get rid of dso__needs_decompress() call in read_object_code()
  tools lib traceevent: Change to SPDX License format
  perf llvm: Allow passing options to llc in addition to clang
  perf parser: Improve error message for PMU address filters
  ...

Pull x86 fixes from Thomas Gleixner:

 - Correct the L1TF fallout on 32bit and the off by one in the 'too much
   RAM for protection' calculation.

 - Add a helpful kernel message for the 'too much RAM' case

 - Unbreak the VDSO in case that the compiler desides to use indirect
   jumps/calls and emits retpolines which cannot be resolved because the
   kernel uses its own thunks, which does not work for the VDSO. Make it
   use the builtin thunks.

 - Re-export start_thread() which was unexported when the 32/64bit
   implementation was unified. start_thread() is required by modular
   binfmt handlers.

 - Trivial cleanups

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/speculation/l1tf: Suggest what to do on systems with too much RAM
  x86/speculation/l1tf: Fix off-by-one error when warning that system has too much RAM
  x86/kvm/vmx: Remove duplicate l1d flush definitions
  x86/speculation/l1tf: Fix overflow in l1tf_pfn_limit() on 32bit
  x86/process: Re-export start_thread()
  x86/mce: Add notifier_block forward declaration
  x86/vdso: Fix vDSO build if a retpoline is emitted

Pull irq update from Thomas Gleixner:
 "A small set of updats/fixes for the irq subsystem:

   - Allow GICv3 interrupts to be configured as wake-up sources to
     enable wakeup from suspend

   - Make the error handling of the STM32 irqchip init function work

   - A set of small cleanups and improvements"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3: Allow interrupt to be configured as wake-up sources
  irqchip/tango: Set irq handler and data in one go
  dt-bindings: irqchip: renesas-irqc: Document r8a774a1 support
  irqchip/s3c24xx: Remove unneeded comparison of unsigned long to 0
  irqchip/stm32: Fix init error handling
  irqchip/bcm7038-l1: Hide cpu offline callback when building for !SMP

Pull licking update from Thomas Gleixner:
 "Mark the switch cases which fall through to the next case with the
  proper comment so the fallthrough compiler checks can be enabled"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Mark expected switch fall-throughs

Merge tag 'libnvdimm-for-4.19_dax-memory-failure' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm memory-failure update from Dave Jiang:
 "As it stands, memory_failure() gets thoroughly confused by dev_pagemap
  backed mappings. The recovery code has specific enabling for several
  possible page states and needs new enabling to handle poison in dax
  mappings.

  In order to support reliable reverse mapping of user space addresses:

   1/ Add new locking in the memory_failure() rmap path to prevent races
      that would typically be handled by the page lock.

   2/ Since dev_pagemap pages are hidden from the page allocator and the
      "compound page" accounting machinery, add a mechanism to determine
      the size of the mapping that encompasses a given poisoned pfn.

   3/ Given pmem errors can be repaired, change the speculatively
      accessed poison protection, mce_unmap_kpfn(), to be reversible and
      otherwise allow ongoing access from the kernel.

  A side effect of this enabling is that MADV_HWPOISON becomes usable
  for dax mappings, however the primary motivation is to allow the
  system to survive userspace consumption of hardware-poison via dax.
  Specifically the current behavior is:

     mce: Uncorrected hardware memory error in user-access at af34214200
     {1}[Hardware Error]: It has been corrected by h/w and requires no further action
     mce: [Hardware Error]: Machine check events logged
     {1}[Hardware Error]: event severity: corrected
     Memory failure: 0xaf34214: reserved kernel page still referenced by 1 users
     [..]
     Memory failure: 0xaf34214: recovery action for reserved kernel page: Failed
     mce: Memory error not recovered
     <reboot>

  ...and with these changes:

     Injecting memory failure for pfn 0x20cb00 at process virtual address 0x7f763dd00000
     Memory failure: 0x20cb00: Killing dax-pmd:5421 due to hardware memory corruption
     Memory failure: 0x20cb00: recovery action for dax page: Recovered

  Given all the cross dependencies I propose taking this through
  nvdimm.git with acks from Naoya, x86/core, x86/RAS, and of course dax
  folks"

* tag 'libnvdimm-for-4.19_dax-memory-failure' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm, pmem: Restore page attributes when clearing errors
  x86/memory_failure: Introduce {set, clear}_mce_nospec()
  x86/mm/pat: Prepare {reserve, free}_memtype() for "decoy" addresses
  mm, memory_failure: Teach memory_failure() about dev_pagemap pages
  filesystem-dax: Introduce dax_lock_mapping_entry()
  mm, memory_failure: Collect mapping size in collect_procs()
  mm, madvise_inject_error: Let memory_failure() optionally take a page reference
  mm, dev_pagemap: Do not clear ->mapping on final put
  mm, madvise_inject_error: Disable MADV_SOFT_OFFLINE for ZONE_DEVICE pages
  filesystem-dax: Set page->index
  device-dax: Set page->index
  device-dax: Enable page_mapping()
  device-dax: Convert to vmf_insert_mixed and vm_fault_t

Pull libnvdimm updates from Dave Jiang:
 "Collection of misc libnvdimm patches for 4.19 submission:

   - Adding support to read locked nvdimm capacity.

   - Change test code to make DSM failure code injection an override.

   - Add support for calculate maximum contiguous area for namespace.

   - Add support for queueing a short ARS when there is on going ARS for
     nvdimm.

   - Allow NULL to be passed in to ->direct_access() for kaddr and pfn
     params.

   - Improve smart injection support for nvdimm emulation testing.

   - Fix test code that supports for emulating controller temperature.

   - Fix hang on error before devm_memremap_pages()

   - Fix a bug that causes user memory corruption when data returned to
     user for ars_status.

   - Maintainer updates for Ross Zwisler emails and adding Jan Kara to
     fsdax"

* tag 'libnvdimm-for-4.19_misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm: fix ars_status output length calculation
  device-dax: avoid hang on error before devm_memremap_pages()
  tools/testing/nvdimm: improve emulation of smart injection
  filesystem-dax: Do not request kaddr and pfn when not required
  md/dm-writecache: Don't request pointer dummy_addr when not required
  dax/super: Do not request a pointer kaddr when not required
  tools/testing/nvdimm: kaddr and pfn can be NULL to ->direct_access()
  s390, dcssblk: kaddr and pfn can be NULL to ->direct_access()
  libnvdimm, pmem: kaddr and pfn can be NULL to ->direct_access()
  acpi/nfit: queue issuing of ars when an uc error notification comes in
  libnvdimm: Export max available extent
  libnvdimm: Use max contiguous area for namespace size
  MAINTAINERS: Add Jan Kara for filesystem DAX
  MAINTAINERS: update Ross Zwisler's email address
  tools/testing/nvdimm: Fix support for emulating controller temperature
  tools/testing/nvdimm: Make DSM failure code injection an override
  acpi, nfit: Prefer _DSM over _LSR for namespace label reads
  libnvdimm: Introduce locked DIMM capacity support

Pull ARM SoC late updates from Olof Johansson:
 "A couple of late-merged changes that would be useful to get in this
  merge window:

   - Driver support for reset of audio complex on Meson platforms. The
     audio driver went in this merge window, and these changes have been
     in -next for a while (just not in our tree).

   - Power management fixes for IOMMU on Rockchip platforms, getting
     closer to kexec working on them, including Chromebooks.

   - Another pass updating "arm,psci" -> "psci" for some properties that
     have snuck in since last time it was done"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  iommu/rockchip: Move irq request past pm_runtime_enable
  iommu/rockchip: Handle errors returned from PM framework
  arm64: rockchip: Force CONFIG_PM on Rockchip systems
  ARM: rockchip: Force CONFIG_PM on Rockchip systems
  arm64: dts: Fix various entry-method properties to reflect documentation
  reset: imx7: Fix always writing bits as 0
  reset: meson: add meson audio arb driver
  reset: meson: add dt-bindings for meson-axg audio arb

Pull more Kbuild updates from Masahiro Yamada:

 - add build_{menu,n,g,x}config targets for compile-testing Kconfig

 - fix and improve recursive dependency detection in Kconfig

 - fix parallel building of menuconfig/nconfig

 - fix syntax error in clang-version.sh

 - suppress distracting log from syncconfig

 - remove obsolete "rpm" target

 - remove VMLINUX_SYMBOL(_STR) macro entirely

 - fix microblaze build with CONFIG_DYNAMIC_FTRACE

 - move compiler test for dead code/data elimination to Kconfig

 - rename well-known LDFLAGS variable to KBUILD_LDFLAGS

 - misc fixes and cleanups

* tag 'kbuild-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: rename LDFLAGS to KBUILD_LDFLAGS
  kbuild: pass LDFLAGS to recordmcount.pl
  kbuild: test dead code/data elimination support in Kconfig
  initramfs: move gen_initramfs_list.sh from scripts/ to usr/
  vmlinux.lds.h: remove stale <linux/export.h> include
  export.h: remove VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR()
  Coccinelle: remove pci_alloc_consistent semantic to detect in zalloc-simple.cocci
  kbuild: make sorting initramfs contents independent of locale
  kbuild: remove "rpm" target, which is alias of "rpm-pkg"
  kbuild: Fix LOADLIBES rename in Documentation/kbuild/makefiles.txt
  kconfig: suppress "configuration written to .config" for syncconfig
  kconfig: fix "Can't open ..." in parallel build
  kbuild: Add a space after `!` to prevent parsing as file pattern
  scripts: modpost: check memory allocation results
  kconfig: improve the recursive dependency report
  kconfig: report recursive dependency involving 'imply'
  kconfig: error out when seeing recursive dependency
  kconfig: add build-only configurator targets
  scripts/dtc: consolidate include path options in Makefile

Pull block fixes from Jens Axboe:
 "A few small fixes for this merge window:

   - Locking imbalance fix for bcache (Shan Hai)

   - A few small fixes for wbt. One is a cleanup/prep, one is a fix for
     an existing issue, and the last two are fixes for changes that went
     into this merge window (me)"

* tag 'for-linus-20180825' of git://git.kernel.dk/linux-block:
  blk-wbt: don't maintain inflight counts if disabled
  blk-wbt: fix has-sleeper queueing check
  blk-wbt: use wq_has_sleeper() for wq active check
  blk-wbt: move disable check into get_limit()
  bcache: release dc->writeback_lock properly in bch_writeback_thread()

Pull UBIFS fix from Richard Weinberger:
 "Remove an empty file from UBIFS source"

* tag 'upstream-4.19-rc1-fix' of git://git.infradead.org/linux-ubifs:
  ubifs: Remove empty file.h

Pull cifs fixes from Steve French:
 "Three small SMB3 fixes, one for stable"

* tag '4.19-rc-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number for cifs.ko to 2.12
  cifs: check kmalloc before use
  cifs: check if SMB2 PDU size has been padded and suppress the warning
  cifs: create a define for how many iovs we need for an SMB2_open()