Fix multiple calls to init_completion for device completion
structures. Instead, initialize them during device probe and
reinitialize them later as needed.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It already existed in part of the function, but move it
to a higher level and use it consistently throughout.

Safe since sk is never written to.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It cannot overlap with the local port range - ie. with autobind selectable
ports - and not with reserved ports.

Indeed 'ip_local_reserved_ports' isn't even a range, it's a (by default
empty) set.

Fixes: 4548b683 ("Introduce a sysctl that modifies the value of PROT_SOCK.")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit 4f07b80c ("tipc: check msg->req data len in
tipc_nl_compat_bearer_disable") the same patch code was copied into
routines: tipc_nl_compat_bearer_disable(),
tipc_nl_compat_link_stat_dump() and tipc_nl_compat_link_reset_stats().
The two link routine occurrences should have been modified to check
the maximum link name length and not bearer name length.

Fixes: 4f07b80c ("tipc: check msg->reg data len in tipc_nl_compat_bearer_disable")
Signed-off-by: John Rutherford <john.rutherford@dektech.com.au>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull IPMI updates from Corey Minyard:
 "Some small fixes accumulated for IPMI, nothing major"

* tag 'for-linus-5.5-1' of git://github.com/cminyard/linux-ipmi:
  ipmi: fix ipmb_poll()'s return type
  ipmi: kill off 'timespec' usage again
  drivers: ipmi: Support for both IPMB Req and Resp
  ipmi: Fix memory leak in __ipmi_bmc_register
  ipmi: bt-bmc: use devm_platform_ioremap_resource() to simplify code
  ipmi: use %*ph to print small buffer
  ipmi: Don't allow device module unload when in use

Pull i3c updates from Boris Brezillon:
 "Minor fixes and MAINTAINERS updates"

* tag 'i3c/for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  MAINTAINERS: add myself as maintainer of Cadence I3C master controller driver
  MAINTAINERS: Mark linux-i3c mailing list moderated
  i3c: Spelling s/dicovered/discovered/
  i3c: master: use i3c_dev_get_master()

Pull pcmcia updates from Dominik Brodowski:
 "Just a few odd fixes and improvements to the PCMCIA core"

* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  pcmcia: remove unused dprintk definition
  pcmcia: include <pcmcia/ds.h> for pcmcia_parse_tuple
  pcmcia: include cs_internal.h for missing declarations
  pcmcia: Use dev_get_drvdata where possible
  pcmcia: clean an indentation issues, remove extraneous spaces

Pull spi updates from Mark Brown:
 "Lots of stuff going on in the core for SPI this time around, the two
  big changes both being around time in different forms:

   - A rework of delay times from Alexandru Ardelean which makes the
     ways in which they are specified more consistent between drivers so
     that what's available to clients is less dependent on the hardware
     implementation.

   - Support for PTP timestamping of transfers from Vladimir Oltean,
     useful for use with precision clocks with SPI control interfaces.

   - Big cleanups for the Atmel, PXA2xx and Zynq QSPI drivers"

* tag 'spi-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (119 commits)
  dt-bindings: spi: Convert stm32 QSPI bindings to json-schema
  spi: pic32: Retire dma_request_slave_channel_compat()
  spi: Fix Kconfig indentation
  spi: mediatek: add SPI_CS_HIGH support
  spi: st-ssc4: add missed pm_runtime_disable
  spi: tegra20-slink: add missed clk_unprepare
  spi: tegra20-slink: Use dma_request_chan() directly for channel request
  spi: tegra114: Use dma_request_chan() directly for channel request
  spi: s3c64xx: Use dma_request_chan() directly for channel request
  spi: qup: Use dma_request_chan() directly for channel request
  spi: pl022: Use dma_request_chan() directly for channel request
  spi: imx: Use dma_request_chan() directly for channel request
  spi: fsl-lpspi: Use dma_request_chan() directly for channel request
  spi: atmel: Use dma_request_chan() directly for channel request
  spi: at91-usart: Use dma_request_chan() directly for channel request
  spi: fsl-cpm: Correct the free:ing
  spi: Fix regression to return zero on success instead of positive value
  spi: pxa2xx: Add missed security checks
  spi: nxp-fspi: Use devm API to fix missed unregistration of controller
  spi: omap2-mcspi: Remove redundant checks
  ...

Pull regulator updates from Mark Brown:
 "Another fairly quiet release for the regulator API, some work all
  around including some core work but mostly in specialist or driver
  specific code:

   - Fix for powering off boot-on regulators

   - Enhancements to the coupled regulator support introduced in the
     last release

   - Conversion of a bunch of drivers to the fwnode API for GPIOs

   - Mode support for DA9062

   - New device support for Qualcomm PM1650, PM8004 and PM895 and
     Silergy SR83X

   - Removal of obsolete AB8505 support"

* tag 'regulator-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (49 commits)
  regulator: da9062: Return REGULATOR_MODE_INVALID for invalid mode
  regulator: Fix Kconfig indentation
  regulator: tps6105x: add optional devicetree support
  tps6105x: add optional devicetree support
  regulator: rn5t618: fix rc5t619 ldo10 enable
  regulator: vexpress: Use PTR_ERR_OR_ZERO() to simplify code
  dt-bindings: mfd: da9062: describe buck modes
  regulator: da9062: add of_map_mode support for bucks
  regulator: da9062: refactor buck modes into header
  regulator: stpmic1: Set a default ramp delay value
  regulator: core: Let boot-on regulators be powered off
  regulator: core: Don't try to remove device links if add failed
  regulator: ab8500: Remove SYSCLKREQ from enum ab8505_regulator_id
  regulator: ab8500: Remove AB8505 USB regulator
  regulator: fan53555: add chip id for Silergy SYR83X
  regulator: fixed: add off-on-delay
  dt-bindings: regulator: fixed: add off-on-delay-us property
  regulator: core: Allow generic coupling only for always-on regulators
  regulator: core: Release coupled_rdevs on regulator_init_coupling() error
  regulator: bd70528: Add MODULE_ALIAS to allow module auto loading
  ...

Pull regmap update from Mark Brown:
 "Just one patch for this release removing some dead code"

* tag 'regmap-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: regmap-w1: Drop unreachable code

Pull networking updates from David Miller:
 "Another merge window, another pull full of stuff:

   1) Support alternative names for network devices, from Jiri Pirko.

   2) Introduce per-netns netdev notifiers, also from Jiri Pirko.

   3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara
      Larsen.

   4) Allow compiling out the TLS TOE code, from Jakub Kicinski.

   5) Add several new tracepoints to the kTLS code, also from Jakub.

   6) Support set channels ethtool callback in ena driver, from Sameeh
      Jubran.

   7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED,
      SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long.

   8) Add XDP support to mvneta driver, from Lorenzo Bianconi.

   9) Lots of netfilter hw offload fixes, cleanups and enhancements,
      from Pablo Neira Ayuso.

  10) PTP support for aquantia chips, from Egor Pomozov.

  11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From
      Josh Hunt.

  12) Add smart nagle to tipc, from Jon Maloy.

  13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat
      Duvvuru.

  14) Add a flow mask cache to OVS, from Tonghao Zhang.

  15) Add XDP support to ice driver, from Maciej Fijalkowski.

  16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak.

  17) Support UDP GSO offload in atlantic driver, from Igor Russkikh.

  18) Support it in stmmac driver too, from Jose Abreu.

  19) Support TIPC encryption and auth, from Tuong Lien.

  20) Introduce BPF trampolines, from Alexei Starovoitov.

  21) Make page_pool API more numa friendly, from Saeed Mahameed.

  22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni.

  23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits)
  libbpf: Fix usage of u32 in userspace code
  mm: Implement no-MMU variant of vmalloc_user_node_flags
  slip: Fix use-after-free Read in slip_open
  net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
  macvlan: schedule bc_work even if error
  enetc: add support Credit Based Shaper(CBS) for hardware offload
  net: phy: add helpers phy_(un)lock_mdio_bus
  mdio_bus: don't use managed reset-controller
  ax88179_178a: add ethtool_op_get_ts_info()
  mlxsw: spectrum_router: Fix use of uninitialized adjacency index
  mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels
  bpf: Simplify __bpf_arch_text_poke poke type handling
  bpf: Introduce BPF_TRACE_x helper for the tracing tests
  bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT
  bpf, testing: Add various tail call test cases
  bpf, x86: Emit patchable direct jump as tail call
  bpf: Constant map key tracking for prog array pokes
  bpf: Add poke dependency tracking for prog array maps
  bpf: Add initial poke descriptor table for jit images
  bpf: Move owner type, jited info into array auxiliary data
  ...

Pull crypto updates from Herbert Xu:
 "API:
   - Add library interfaces of certain crypto algorithms for WireGuard
   - Remove the obsolete ablkcipher and blkcipher interfaces
   - Move add_early_randomness() out of rng_mutex

  Algorithms:
   - Add blake2b shash algorithm
   - Add blake2s shash algorithm
   - Add curve25519 kpp algorithm
   - Implement 4 way interleave in arm64/gcm-ce
   - Implement ciphertext stealing in powerpc/spe-xts
   - Add Eric Biggers's scalar accelerated ChaCha code for ARM
   - Add accelerated 32r2 code from Zinc for MIPS
   - Add OpenSSL/CRYPTOGRAMS poly1305 implementation for ARM and MIPS

  Drivers:
   - Fix entropy reading failures in ks-sa
   - Add support for sam9x60 in atmel
   - Add crypto accelerator for amlogic GXL
   - Add sun8i-ce Crypto Engine
   - Add sun8i-ss cryptographic offloader
   - Add a host of algorithms to inside-secure
   - Add NPCM RNG driver
   - add HiSilicon HPRE accelerator
   - Add HiSilicon TRNG driver"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (285 commits)
  crypto: vmx - Avoid weird build failures
  crypto: lib/chacha20poly1305 - use chacha20_crypt()
  crypto: x86/chacha - only unregister algorithms if registered
  crypto: chacha_generic - remove unnecessary setkey() functions
  crypto: amlogic - enable working on big endian kernel
  crypto: sun8i-ce - enable working on big endian
  crypto: mips/chacha - select CRYPTO_SKCIPHER, not CRYPTO_BLKCIPHER
  hwrng: ks-sa - Enable COMPILE_TEST
  crypto: essiv - remove redundant null pointer check before kfree
  crypto: atmel-aes - Change data type for "lastc" buffer
  crypto: atmel-tdes - Set the IV after {en,de}crypt
  crypto: sun4i-ss - fix big endian issues
  crypto: sun4i-ss - hide the Invalid keylen message
  crypto: sun4i-ss - use crypto_ahash_digestsize
  crypto: sun4i-ss - remove dependency on not 64BIT
  crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.c
  MAINTAINERS: Add maintainer for HiSilicon SEC V2 driver
  crypto: hisilicon - add DebugFS for HiSilicon SEC
  Documentation: add DebugFS doc for HiSilicon SEC
  crypto: hisilicon - add SRIOV for HiSilicon SEC
  ...

Merge tag 'livepatching-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching updates from Petr Mladek:

 - New API to track system state changes done be livepatch callbacks. It
   helps to maintain compatibility between livepatches.

 - Update Kconfig help text. ORC is another reliable unwinder.

 - Disable generic selftest timeout. Livepatch selftests have their own
   per-operation fine-grained timeouts.

* tag 'livepatching-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  x86/stacktrace: update kconfig help text for reliable unwinders
  livepatch: Selftests of the API for tracking system state changes
  livepatch: Documentation of the new API for tracking system state changes
  livepatch: Allow to distinguish different version of system state changes
  livepatch: Basic API to track system state changes
  livepatch: Keep replaced patches until post_patch callback is called
  selftests/livepatch: Disable the timeout

Pull printk updates from Petr Mladek:

 - Allow to print symbolic error names via new %pe modifier.

 - Use pr_warn() instead of the remaining pr_warning() calls. Fix
   formatting of the related lines.

 - Add VSPRINTF entry to MAINTAINERS.

* tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits)
  checkpatch: don't warn about new vsprintf pointer extension '%pe'
  MAINTAINERS: Add VSPRINTF
  tools lib api: Renaming pr_warning to pr_warn
  ASoC: samsung: Use pr_warn instead of pr_warning
  lib: cpu_rmap: Use pr_warn instead of pr_warning
  trace: Use pr_warn instead of pr_warning
  dma-debug: Use pr_warn instead of pr_warning
  vgacon: Use pr_warn instead of pr_warning
  fs: afs: Use pr_warn instead of pr_warning
  sh/intc: Use pr_warn instead of pr_warning
  scsi: Use pr_warn instead of pr_warning
  platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning
  platform/x86: asus-laptop: Use pr_warn instead of pr_warning
  platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning
  oprofile: Use pr_warn instead of pr_warning
  of: Use pr_warn instead of pr_warning
  macintosh: Use pr_warn instead of pr_warning
  idsn: Use pr_warn instead of pr_warning
  ide: Use pr_warn instead of pr_warning
  crypto: n2: Use pr_warn instead of pr_warning
  ...

Pull cgroup updates from Tejun Heo:
 "There are several notable changes here:

   - Single thread migrating itself has been optimized so that it
     doesn't need threadgroup rwsem anymore.

   - Freezer optimization to avoid unnecessary frozen state changes.

   - cgroup ID unification so that cgroup fs ino is the only unique ID
     used for the cgroup and can be used to directly look up live
     cgroups through filehandle interface on 64bit ino archs. On 32bit
     archs, cgroup fs ino is still the only ID in use but it is only
     unique when combined with gen.

   - selftest and other changes"

* 'for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (24 commits)
  writeback: fix -Wformat compilation warnings
  docs: cgroup: mm: Fix spelling of "list"
  cgroup: fix incorrect WARN_ON_ONCE() in cgroup_setup_root()
  cgroup: use cgrp->kn->id as the cgroup ID
  kernfs: use 64bit inos if ino_t is 64bit
  kernfs: implement custom exportfs ops and fid type
  kernfs: combine ino/id lookup functions into kernfs_find_and_get_node_by_id()
  kernfs: convert kernfs_node->id from union kernfs_node_id to u64
  kernfs: kernfs_find_and_get_node_by_ino() should only look up activated nodes
  kernfs: use dumber locking for kernfs_find_and_get_node_by_ino()
  netprio: use css ID instead of cgroup ID
  writeback: use ino_t for inodes in tracepoints
  kernfs: fix ino wrap-around detection
  kselftests: cgroup: Avoid the reuse of fd after it is deallocated
  cgroup: freezer: don't change task and cgroups status unnecessarily
  cgroup: use cgroup->last_bstat instead of cgroup->bstat_pending for consistency
  cgroup: remove cgroup_enable_task_cg_lists() optimization
  cgroup: pids: use atomic64_t for pids->limit
  selftests: cgroup: Run test_core under interfering stress
  selftests: cgroup: Add task migration tests
  ...

Pull workqueue updates from Tejun Heo:
 "There have been sporadic reports of sanity checks in
  destroy_workqueue() failing spuriously over the years. This contains
  the fix and its follow-up changes / fixes.

  There's also a RCU annotation improvement"

* 'for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Add RCU annotation for pwq list walk
  workqueue: Fix pwq ref leak in rescuer_thread()
  workqueue: more destroy_workqueue() fixes
  workqueue: Minor follow-ups to the rescuer destruction change
  workqueue: Fix missing kfree(rescuer) in destroy_workqueue()
  workqueue: Fix spurious sanity check failures in destroy_workqueue()

Pull thread management updates from Christian Brauner:

 - A pidfd's fdinfo file currently contains the field "Pid:\t<pid>"
   where <pid> is the pid of the process in the pid namespace of the
   procfs instance the fdinfo file for the pidfd was opened in.

   The fdinfo file has now gained a new "NSpid:\t<ns-pid1>[\t<ns-pid2>[...]]"
   field which lists the pids of the process in all child pid namespaces
   provided the pid namespace of the procfs instance it is looked up
   under has an ancestoral relationship with the pid namespace of the
   process. If it does not 0 will be shown and no further pid namespaces
   will be listed. Tests included. (Christian Kellner)

 - If the process the pidfd references has already exited, print -1 for
   the Pid and NSpid fields in the pidfd's fdinfo file. Tests included.
   (me)

 - Add CLONE_CLEAR_SIGHAND. This lets callers clear all signal handler
   that are not SIG_DFL or SIG_IGN at process creation time. This
   originated as a feature request from glibc to improve performance and
   elimate races in their posix_spawn() implementation. Tests included.
   (me)

 - Add support for choosing a specific pid for a process with clone3().
   This is the feature which was part of the thread update for v5.4 but
   after a discussion at LPC in Lisbon we decided to delay it for one
   more cycle in order to make the interface more generic. This has now
   done. It is now possible to choose a specific pid in a whole pid
   namespaces (sub)hierarchy instead of just one pid namespace. In order
   to choose a specific pid the caller must have CAP_SYS_ADMIN in all
   owning user namespaces of the target pid namespaces. Tests included.
   (Adrian Reber)

 - Test improvements and extensions. (Andrei Vagin, me)

* tag 'threads-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  selftests/clone3: skip if clone3() is ENOSYS
  selftests/clone3: check that all pids are released on error paths
  selftests/clone3: report a correct number of fails
  selftests/clone3: flush stdout and stderr before clone3() and _exit()
  selftests: add tests for clone3() with *set_tid
  fork: extend clone3() to support setting a PID
  selftests: add tests for clone3()
  tests: test CLONE_CLEAR_SIGHAND
  clone3: add CLONE_CLEAR_SIGHAND
  pid: use pid_has_task() in pidfd_open()
  exit: use pid_has_task() in do_wait()
  pid: use pid_has_task() in __change_pid()
  test: verify fdinfo for pidfd of reaped process
  pidfd: check pid has attached task in fdinfo
  pidfd: add tests for NSpid info in fdinfo
  pidfd: add NSpid entries to fdinfo

Pull EDAC updates from Borislav Petkov:
 "A lot of changes this time around, details below.

  From the next cycle onwards, we'll switch the EDAC tree to topic
  branches (instead of a single edac-for-next branch) which should make
  the changes handling more flexible, hopefully. We'll see.

  Summary:

   - Rework error logging functions to accept a count of errors
     parameter (Hanna Hawa)

   - Part one of substantial EDAC core + ghes_edac driver cleanup
     (Robert Richter)

   - Print additional useful logging information in skx_* (Tony Luck)

   - Improve amd64_edac hw detection + cleanups (Yazen Ghannam)

   - Misc cleanups, fixes and code improvements"

* tag 'edac_for_5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: (35 commits)
  EDAC/altera: Use the Altera System Manager driver
  EDAC/altera: Cleanup the ECC Manager
  EDAC/altera: Use fast register IO for S10 IRQs
  EDAC/ghes: Do not warn when incrementing refcount on 0
  EDAC/Documentation: Describe CPER module definition and DIMM ranks
  EDAC: Unify the mc_event tracepoint call
  EDAC/ghes: Remove intermediate buffer pvt->detail_location
  EDAC/ghes: Fix grain calculation
  EDAC/ghes: Use standard kernel macros for page calculations
  EDAC: Remove misleading comment in struct edac_raw_error_desc
  EDAC/mc: Reduce indentation level in edac_mc_handle_error()
  EDAC/mc: Remove needless zero string termination
  EDAC/mc: Do not BUG_ON() in edac_mc_alloc()
  EDAC: Introduce an mci_for_each_dimm() iterator
  EDAC: Remove EDAC_DIMM_OFF() macro
  EDAC: Replace EDAC_DIMM_PTR() macro with edac_get_dimm() function
  EDAC/amd64: Get rid of the ECC disabled long message
  EDAC/ghes: Fix locking and memory barrier issues
  EDAC/amd64: Check for memory before fully initializing an instance
  EDAC/amd64: Use cached data when checking for ECC
  ...

Pull KVM updates from Paolo Bonzini:
 "ARM:
   - data abort report and injection
   - steal time support
   - GICv4 performance improvements
   - vgic ITS emulation fixes
   - simplify FWB handling
   - enable halt polling counters
   - make the emulated timer PREEMPT_RT compliant

  s390:
   - small fixes and cleanups
   - selftest improvements
   - yield improvements

  PPC:
   - add capability to tell userspace whether we can single-step the
     guest
   - improve the allocation of XIVE virtual processor IDs
   - rewrite interrupt synthesis code to deliver interrupts in virtual
     mode when appropriate.
   - minor cleanups and improvements.

  x86:
   - XSAVES support for AMD
   - more accurate report of nested guest TSC to the nested hypervisor
   - retpoline optimizations
   - support for nested 5-level page tables
   - PMU virtualization optimizations, and improved support for nested
     PMU virtualization
   - correct latching of INITs for nested virtualization
   - IOAPIC optimization
   - TSX_CTRL virtualization for more TAA happiness
   - improved allocation and flushing of SEV ASIDs
   - many bugfixes and cleanups"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
  kvm: nVMX: Relax guest IA32_FEATURE_CONTROL constraints
  KVM: x86: Grab KVM's srcu lock when setting nested state
  KVM: x86: Open code shared_msr_update() in its only caller
  KVM: Fix jump label out_free_* in kvm_init()
  KVM: x86: Remove a spurious export of a static function
  KVM: x86: create mmu/ subdirectory
  KVM: nVMX: Remove unnecessary TLB flushes on L1<->L2 switches when L1 use apic-access-page
  KVM: x86: remove set but not used variable 'called'
  KVM: nVMX: Do not mark vmcs02->apic_access_page as dirty when unpinning
  KVM: vmx: use MSR_IA32_TSX_CTRL to hard-disable TSX on guest that lack it
  KVM: vmx: implement MSR_IA32_TSX_CTRL disable RTM functionality
  KVM: x86: implement MSR_IA32_TSX_CTRL effect on CPUID
  KVM: x86: do not modify masked bits of shared MSRs
  KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES
  KVM: PPC: Book3S HV: XIVE: Fix potential page leak on error path
  KVM: PPC: Book3S HV: XIVE: Free previous EQ page when setting up a new one
  KVM: nVMX: Assume TLB entries of L1 and L2 are tagged differently if L0 use EPT
  KVM: x86: Unexport kvm_vcpu_reload_apic_access_page()
  KVM: nVMX: add CR4_LA57 bit to nested CR4_FIXED1
  KVM: nVMX: Use semi-colon instead of comma for exit-handlers initialization
  ...

Pull xen updates from Juergen Gross:

 - a small series to remove the build constraint of Xen x86 MCE handling
   to 64-bit only

 - a bunch of minor cleanups

* tag 'for-linus-5.5a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: Fix Kconfig indentation
  xen/mcelog: also allow building for 32-bit kernels
  xen/mcelog: add PPIN to record when available
  xen/mcelog: drop __MC_MSR_MCGCAP
  xen/gntdev: Use select for DMA_SHARED_BUFFER
  xen: mm: make xen_mm_init static
  xen: mm: include <xen/xen-ops.h> for missing declarations

Pull MIPS updates from Paul Burton:
 "The main MIPS changes for 5.5:

   - Atomics-related code sees some rework & cleanup, most notably
     allowing Loongson LL/SC errata workarounds to be more bulletproof &
     their correctness to be checked at build time.

   - Command line setup code is simplified somewhat, resolving various
     corner cases.

   - MIPS kernels can now be built with kcov code coverage support.

   - We can now build with CONFIG_FORTIFY_SOURCE=y.

   - Miscellaneous cleanups.

  And some platform specific changes:

   - We now disable some broken TLB functionality on certain Ingenic
     systems, and JZ4780 systems gain some devicetree nodes to support
     more devices.

   - Loongson support sees a number of cleanups, and we gain initial
     support for Loongson 3A R4 systems.

   - We gain support for MediaTek MT7688-based GARDENA Smart Gateway
     systems.

   - SGI IP27 (Origin 2*) see a number of fixes, cleanups &
     simplifications.

   - SGI IP30 (Octane) systems are now supported"

* tag 'mips_5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (107 commits)
  MIPS: SGI-IP27: Enable ethernet phy on second Origin 200 module
  MIPS: PCI: Fix fake subdevice ID for IOC3
  MIPS: Ingenic: Disable abandoned HPTLB function.
  MIPS: PCI: remember nasid changed by set interrupt affinity
  MIPS: SGI-IP27: Fix crash, when CPUs are disabled via nr_cpus parameter
  mips: add support for folded p4d page tables
  mips: drop __pXd_offset() macros that duplicate pXd_index() ones
  mips: fix build when "48 bits virtual memory" is enabled
  MIPS: math-emu: Reuse name array in debugfs_fpuemu()
  MIPS: allow building with kcov coverage
  MIPS: Loongson64: Drop setup_pcimap
  MIPS: Loongson2ef: Convert to early_printk_8250
  MIPS: Drop CPU_SUPPORTS_UNCACHED_ACCELERATED
  MIPS: Loongson{2ef, 32, 64} convert to generic fw cmdline
  MIPS: Drop pmon.h
  MIPS: Loongson: Unify LOONGSON3/LOONGSON64 Kconfig usage
  MIPS: Loongson: Rename LOONGSON1 to LOONGSON32
  MIPS: Loongson: Fix return value of loongson_hwmon_init
  MIPS: add support for SGI Octane (IP30)
  MIPS: PCI: make phys_to_dma/dma_to_phys for pci-xtalk-bridge common
  ...

Pull m68k updates from Geert Uytterhoeven:

 - Atari Falcon IDE platform driver conversion for module autoload

 - defconfig updates (including enablement of Amiga ICY I2C)

 - small fixes and cleanups

* tag 'm68k-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k/atari: Convert Falcon IDE drivers to platform drivers
  m68k: defconfig: Enable ICY I2C and LTC2990 on Amiga
  m68k: defconfig: Update defconfigs for v5.4-rc1
  m68k: q40: Fix info-leak in rtc_ioctl
  nubus: Remove cast to void pointer

Pull RAS updates from Borislav Petkov:

 - Fully reworked thermal throttling notifications, there should be no
   more spamming of dmesg (Srinivas Pandruvada and Benjamin Berg)

 - More enablement for the Intel-compatible CPUs Zhaoxin (Tony W
   Wang-oc)

 - PPIN support for Icelake (Tony Luck)

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce/therm_throt: Optimize notifications of thermal throttle
  x86/mce: Add Xeon Icelake to list of CPUs that support PPIN
  x86/mce: Lower throttling MCE messages' priority to warning
  x86/mce: Add Zhaoxin LMCE support
  x86/mce: Add Zhaoxin CMCI support
  x86/mce: Add Zhaoxin MCE support
  x86/mce/amd: Make disable_err_thresholding() static

Pull x86 microcode updates from Borislav Petkov:
 "This converts the late loading method to load the microcode in
  parallel (vs sequentially currently). The patch remained in linux-next
  for the maximum amount of time so that any potential and hard to debug
  fallout be minimized.

  Now cloud folks have their milliseconds back but all the normal people
  should use early loading anyway :-)"

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode/intel: Issue the revision updated message only on the BSP
  x86/microcode: Update late microcode in parallel
  x86/microcode/amd: Fix two -Wunused-but-set-variable warnings

Pull s390 updates from Vasily Gorbik:

 - Adjust PMU device drivers registration to avoid WARN_ON and few other
   perf improvements.

 - Enhance tracing in vfio-ccw.

 - Few stack unwinder fixes and improvements, convert get_wchan custom
   stack unwinding to generic api usage.

 - Fixes for mm helpers issues uncovered with tests validating
   architecture page table helpers.

 - Fix noexec bit handling when hardware doesn't support it.

 - Fix memleak and unsigned value compared with zero bugs in crypto
   code. Minor code simplification.

 - Fix crash during kdump with kasan enabled kernel.

 - Switch bug and alternatives from asm to asm_inline to improve
   inlining decisions.

 - Use 'depends on cc-option' for MARCH and TUNE options in Kconfig, add
   z13s and z14 ZR1 to TUNE descriptions.

 - Minor head64.S simplification.

 - Fix physical to logical CPU map for SMT.

 - Several cleanups in qdio code.

 - Other minor cleanups and fixes all over the code.

* tag 's390-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits)
  s390/cpumf: Adjust registration of s390 PMU device drivers
  s390/smp: fix physical to logical CPU map for SMT
  s390/early: move access registers setup in C code
  s390/head64: remove unnecessary vdso_per_cpu_data setup
  s390/early: move control registers setup in C code
  s390/kasan: support memcpy_real with TRACE_IRQFLAGS
  s390/crypto: Fix unsigned variable compared with zero
  s390/pkey: use memdup_user() to simplify code
  s390/pkey: fix memory leak within _copy_apqns_from_user()
  s390/disassembler: don't hide instruction addresses
  s390/cpum_sf: Assign error value to err variable
  s390/cpum_sf: Replace function name in debug statements
  s390/cpum_sf: Use consistant debug print format for sampling
  s390/unwind: drop unnecessary code around calling ftrace_graph_ret_addr()
  s390: add error handling to perf_callchain_kernel
  s390: always inline current_stack_pointer()
  s390/mm: add mm_pxd_folded() checks to pxd_free()
  s390/mm: properly clear _PAGE_NOEXEC bit when it is not supported
  s390/mm: simplify page table helpers for large entries
  s390/mm: make pmd/pud_bad() report large entries as bad
  ...

Daniel Borkmann says:

====================
pull-request: bpf-next 2019-11-26

The following pull-request contains BPF updates for your *net-next* tree.

We've added 2 non-merge commits during the last 1 day(s) which contain
a total of 2 files changed, 14 insertions(+), 3 deletions(-).

The main changes, 2 small fixes are:

1) Fix libbpf out of tree compilation which complained about unknown u32
   type used in libbpf_find_vmlinux_btf_id() which needs to be __u32 instead,
   from Andrii Nakryiko.

2) Follow-up fix for the prior BPF mmap series where kbuild bot complained
   about missing vmalloc_user_node_flags() for no-MMU, also from Andrii Nakryiko.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull arm64 updates from Catalin Marinas:
 "Apart from the arm64-specific bits (core arch and perf, new arm64
  selftests), it touches the generic cow_user_page() (reviewed by
  Kirill) together with a macro for x86 to preserve the existing
  behaviour on this architecture.

  Summary:

   - On ARMv8 CPUs without hardware updates of the access flag, avoid
     failing cow_user_page() on PFN mappings if the pte is old. The
     patches introduce an arch_faults_on_old_pte() macro, defined as
     false on x86. When true, cow_user_page() makes the pte young before
     attempting __copy_from_user_inatomic().

   - Covert the synchronous exception handling paths in
     arch/arm64/kernel/entry.S to C.

   - FTRACE_WITH_REGS support for arm64.

   - ZONE_DMA re-introduced on arm64 to support Raspberry Pi 4

   - Several kselftest cases specific to arm64, together with a
     MAINTAINERS update for these files (moved to the ARM64 PORT entry).

   - Workaround for a Neoverse-N1 erratum where the CPU may fetch stale
     instructions under certain conditions.

   - Workaround for Cortex-A57 and A72 errata where the CPU may
     speculatively execute an AT instruction and associate a VMID with
     the wrong guest page tables (corrupting the TLB).

   - Perf updates for arm64: additional PMU topologies on HiSilicon
     platforms, support for CCN-512 interconnect, AXI ID filtering in
     the IMX8 DDR PMU, support for the CCPI2 uncore PMU in ThunderX2.

   - GICv3 optimisation to avoid a heavy barrier when accessing the
     ICC_PMR_EL1 register.

   - ELF HWCAP documentation updates and clean-up.

   - SMC calling convention conduit code clean-up.

   - KASLR diagnostics printed during boot

   - NVIDIA Carmel CPU added to the KPTI whitelist

   - Some arm64 mm clean-ups: use generic free_initrd_mem(), remove
     stale macro, simplify calculation in __create_pgd_mapping(), typos.

   - Kconfig clean-ups: CMDLINE_FORCE to depend on CMDLINE, choice for
     endinanness to help with allmodconfig"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits)
  arm64: Kconfig: add a choice for endianness
  kselftest: arm64: fix spelling mistake "contiguos" -> "contiguous"
  arm64: Kconfig: make CMDLINE_FORCE depend on CMDLINE
  MAINTAINERS: Add arm64 selftests to the ARM64 PORT entry
  arm64: kaslr: Check command line before looking for a seed
  arm64: kaslr: Announce KASLR status on boot
  kselftest: arm64: fake_sigreturn_misaligned_sp
  kselftest: arm64: fake_sigreturn_bad_size
  kselftest: arm64: fake_sigreturn_duplicated_fpsimd
  kselftest: arm64: fake_sigreturn_missing_fpsimd
  kselftest: arm64: fake_sigreturn_bad_size_for_magic0
  kselftest: arm64: fake_sigreturn_bad_magic
  kselftest: arm64: add helper get_current_context
  kselftest: arm64: extend test_init functionalities
  kselftest: arm64: mangle_pstate_invalid_mode_el[123][ht]
  kselftest: arm64: mangle_pstate_invalid_daif_bits
  kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils
  kselftest: arm64: extend toplevel skeleton Makefile
  drivers/perf: hisi: update the sccl_id/ccl_id for certain HiSilicon platform
  arm64: mm: reserve CMA and crashkernel in ZONE_DMA32
  ...

Merge tag 'linux-kselftest-5.5-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest KUnit support gtom Shuah Khan:
 "This adds KUnit, a lightweight unit testing and mocking framework for
  the Linux kernel from Brendan Higgins.

  KUnit is not an end-to-end testing framework. It is currently
  supported on UML and sub-systems can write unit tests and run them in
  UML env. KUnit documentation is included in this update.

  In addition, this Kunit update adds 3 new kunit tests:

   - proc sysctl test from Iurii Zaikin

   - the 'list' doubly linked list test from David Gow

   - ext4 tests for decoding extended timestamps from Iurii Zaikin

  In the future KUnit will be linked to Kselftest framework to provide a
  way to trigger KUnit tests from user-space"

* tag 'linux-kselftest-5.5-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (23 commits)
  lib/list-test: add a test for the 'list' doubly linked list
  ext4: add kunit test for decoding extended timestamps
  Documentation: kunit: Fix verification command
  kunit: Fix '--build_dir' option
  kunit: fix failure to build without printk
  MAINTAINERS: add proc sysctl KUnit test to PROC SYSCTL section
  kernel/sysctl-test: Add null pointer test for sysctl.c:proc_dointvec()
  MAINTAINERS: add entry for KUnit the unit testing framework
  Documentation: kunit: add documentation for KUnit
  kunit: defconfig: add defconfigs for building KUnit tests
  kunit: tool: add Python wrappers for running KUnit tests
  kunit: test: add tests for KUnit managed resources
  kunit: test: add the concept of assertions
  kunit: test: add tests for kunit test abort
  kunit: test: add support for test abort
  objtool: add kunit_try_catch_throw to the noreturn list
  kunit: test: add initial tests
  lib: enable building KUnit in lib/
  kunit: test: add the concept of expectations
  kunit: test: add assertion printing library
  ...

Merge tag 'linux-kselftest-5.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "This consists of several fixes to tests and framework.

  Masami Hiramatsu fixed several tests to build and run correctly on arm
  and other 32bit architectures"

* tag 'linux-kselftest-5.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: sync: Fix cast warnings on arm
  selftests: net: Fix printf format warnings on arm
  selftests: net: Use size_t and ssize_t for counting file size
  selftests: vm: Build/Run 64bit tests only on 64bit arch
  selftests: proc: Make va_max 1MB
  kselftest: Fix NULL INSTALL_PATH for TARGETS runlist
  selftests: Move kselftest_module.sh into kselftest/
  selftests: gen_kselftest_tar.sh: Do not clobber kselftest/
  selftests: breakpoints: Fix a typo of function name
  selftests: Fix O= and KBUILD_OUTPUT handling for relative paths

Merge in networking bug fixes for merge window.
Signed-off-by: David S. Miller <davem@davemloft.net>

u32 is not defined for libbpf when compiled outside of kernel sources (e.g.,
in Github projection). Use __u32 instead.

Fixes: b8c54ea4 ("libbpf: Add support to attach to fentry/fexit tracing progs")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191125212948.1163343-1-andriin@fb.com

To fix build with !CONFIG_MMU, implement it for no-MMU configurations as well.

Fixes: fc970227 ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20191123220835.1237773-1-andriin@fb.com

Pull fsverity updates from Eric Biggers:
 "Expose the fs-verity bit through statx()"

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  docs: fs-verity: mention statx() support
  f2fs: support STATX_ATTR_VERITY
  ext4: support STATX_ATTR_VERITY
  statx: define STATX_ATTR_VERITY
  docs: fs-verity: document first supported kernel version

Pull fscrypt updates from Eric Biggers:

 - Add the IV_INO_LBLK_64 encryption policy flag which modifies the
   encryption to be optimized for UFS inline encryption hardware.

 - For AES-128-CBC, use the crypto API's implementation of ESSIV (which
   was added in 5.4) rather than doing ESSIV manually.

 - A few other cleanups.

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  f2fs: add support for IV_INO_LBLK_64 encryption policies
  ext4: add support for IV_INO_LBLK_64 encryption policies
  fscrypt: add support for IV_INO_LBLK_64 policies
  fscrypt: avoid data race on fscrypt_mode::logged_impl_name
  docs: ioctl-number: document fscrypt ioctl numbers
  fscrypt: zeroize fscrypt_info before freeing
  fscrypt: remove struct fscrypt_ctx
  fscrypt: invoke crypto API for ESSIV handling

Pull AFFS updates from David Sterba:
 "A minor bugfix and cleanup for AFFS"

* tag 'affs-for-5.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  affs: fix a memory leak in affs_remount
  affs: Replace binary semaphores with mutexes

Pull btrfs updates from David Sterba:
 "User visible changes:
   - new block group profiles: RAID1 with 3- and 4- copies
       - RAID1 in btrfs has always 2 copies, now add support for 3 and 4
       - this is an incompat feature (named RAID1C34)
       - recommended use of RAID1C3 is replacement of RAID6 profile on
         metadata, this brings a more reliable resiliency against 2
         device loss/damage

   - support for new checksums
       - per-filesystem, set at mkfs time
       - fast hash (crc32c successor): xxhash, 64bit digest
       - strong hashes (both 256bit): sha256 (slower, FIPS), blake2b
         (faster)
       - the blake2b module goes via the crypto tree, btrfs.ko has a
         soft dependency

   - speed up lseek, don't take inode locks unnecessarily, this can
     speed up parallel SEEK_CUR/SEEK_SET/SEEK_END by 80%

   - send:
       - allow clone operations within the same file
       - limit maximum number of sent clone references to avoid slow
         backref walking

   - error message improvements: device scan prints process name and PID

  Core changes:
   - cleanups
       - remove unique workqueue helpers, used to provide a way to avoid
         deadlocks in the workqueue code, now done in a simpler way
       - remove lots of indirect function calls in compression code
       - extent IO tree code moved out of extent_io.c
       - cleanup backup superblock handling at mount time
       - transaction life cycle documentation and cleanups
       - locking code cleanups, annotations and documentation
       - add more cold, const, pure function attributes
       - removal of unused or redundant struct members or variables

   - new tree-checker sanity tests
       - try to detect missing INODE_ITEM, cross-reference checks of
         DIR_ITEM, DIR_INDEX, INODE_REF, and XATTR_* items

   - remove own bio scheduling code (used to avoid checksum submissions
     being stuck behind other IO), replaced by cgroup controller-based
     code to allow better control and avoid priority inversions in cases
     where the custom and cgroup scheduling disagreed

  Fixes:
   - avoid getting stuck during cyclic writebacks

   - fix trimming of ranges crossing block group boundaries

   - fix rename exchange on subvolumes, all involved subvolumes need to
     be recorded in the transaction"

* tag 'for-5.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (137 commits)
  btrfs: drop bdev argument from submit_extent_page
  btrfs: remove extent_map::bdev
  btrfs: drop bio_set_dev where not needed
  btrfs: get bdev directly from fs_devices in submit_extent_page
  btrfs: record all roots for rename exchange on a subvol
  Btrfs: fix block group remaining RO forever after error during device replace
  btrfs: scrub: Don't check free space before marking a block group RO
  btrfs: change btrfs_fs_devices::rotating to bool
  btrfs: change btrfs_fs_devices::seeding to bool
  btrfs: rename btrfs_block_group_cache
  btrfs: block-group: Reuse the item key from caller of read_one_block_group()
  btrfs: block-group: Refactor btrfs_read_block_groups()
  btrfs: document extent buffer locking
  btrfs: access eb::blocking_writers according to ACCESS_ONCE policies
  btrfs: set blocking_writers directly, no increment or decrement
  btrfs: merge blocking_writers branches in btrfs_tree_read_lock
  btrfs: drop incompat bit for raid1c34 after last block group is gone
  btrfs: add incompat for raid1 with 3, 4 copies
  btrfs: add support for 4-copy replication (raid1c4)
  btrfs: add support for 3-copy replication (raid1c3)
  ...

Pull MTD updates from Miquel Raynal:
 "MTD core:
   - drop inactive maintainers, update the repositories and add IRC
     channel
   - debugfs functions improvements
   - initialize more structure parameters
   - misc fixes reported by robots

  MTD devices:
   - spear_smi: Fixed Write Burst mode
   - new Intel IXP4xx flash probing hook

  Raw NAND core:
   - useless extra checks dropped
   - update the detection of the bad block markers position

  Raw NAND controller drivers:
   - Cadence: new driver
   - Brcmnand: support for flash-dma v0 + fixes
   - Denali: drop support for the legacy controller/chip DT representation
   - superfluous dev_err() calls removed

  SPI NOR core changes:
   - introduce 'struct spi_nor_controller_ops'
   - clean the Register Operations methods
   - use dev_dbg insted of dev_err for low level info
   - fix retlen handling in sst_write()
   - fix silent truncations in spi_nor_read and spi_nor_read_raw()
   - fix the clearing of QE bit on lock()/unlock()
   - rework the disabling of the block write protection
   - rework the Quad Enable methods
   - make sure nor->spimem and nor->controller_ops are mutually exclusive
   - set default Quad Enable method for ISSI flashes
   - add support for few flashes

  SPI NOR controller drivers changes:
   - intel-spi:
      - support chips without software sequencer
      - add support for Intel Cannon Lake and Intel Comet Lake-H flashes

  CFI core changes:
   - code cleanups related useless initializers and coding style issues
   - fix for a possible double free problem in cfi_cmdset_0002
   - improved HyperFlash error reporting and handling in cfi_cmdset_0002 core"

* tag 'mtd/for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (73 commits)
  mtd: devices: fix mchp23k256 read and write
  mtd: no need to check return value of debugfs_create functions
  mtd: spi-nor: Set default Quad Enable method for ISSI flashes
  mtd: spi-nor: Add support for is25wp256
  mtd: spi-nor: Add support for w25q256jw
  mtd: spi-nor: Move condition to avoid a NULL check
  mtd: spi-nor: Make sure nor->spimem and nor->controller_ops are mutually exclusive
  mtd: spi-nor: Rename Quad Enable methods
  mtd: spi-nor: Merge spansion Quad Enable methods
  mtd: spi-nor: Rename CR_QUAD_EN_SPAN to SR2_QUAD_EN_BIT1
  mtd: spi-nor: Extend the SR Read Back test
  mtd: spi-nor: Rework the disabling of block write protection
  mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()
  mtd: cfi_cmdset_0002: fix delayed error detection on HyperFlash
  mtd: cfi_cmdset_0002: only check errors when ready in cfi_check_err_status()
  mtd: cfi_cmdset_0002: don't free cfi->cfiq in error path of cfi_amdstd_setup()
  mtd: cfi_cmdset_*: kill useless 'ret' variable initializers
  mtd: cfi_util: use DIV_ROUND_UP() in cfi_udelay()
  mtd: spi-nor: Print debug message when the read back test fails
  mtd: spi-nor: Check all the bits written, not just the BP ones
  ...

Merge tag 'for-5.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Fix DM core to disallow stacking request-based DM on partitions.

 - Fix DM raid target to properly resync raidset even if bitmap needed
   additional pages.

 - Fix DM crypt performance regression due to use of WQ_HIGHPRI for the
   IO and crypt workqueues.

 - Fix DM integrity metadata layout that was aligned on 128K boundary
   rather than the intended 4K boundary (removes 124K of wasted space
   for each metadata block).

 - Improve the DM thin, cache and clone targets to use spin_lock_irq
   rather than spin_lock_irqsave where possible.

 - Fix DM thin single thread performance that was lost due to needless
   workqueue wakeups.

 - Fix DM zoned target performance that was lost due to excessive
   backing device checks.

 - Add ability to trigger write failure with the DM dust test target.

 - Fix whitespace indentation in drivers/md/Kconfig.

 - Various smalls fixes and cleanups (e.g. use struct_size, fix
   uninitialized variable, variable renames, etc).

* tag 'for-5.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (22 commits)
  Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"
  dm: Fix Kconfig indentation
  dm thin: wakeup worker only when deferred bios exist
  dm integrity: fix excessive alignment of metadata runs
  dm raid: Remove unnecessary negation of a shift in raid10_format_to_md_layout
  dm zoned: reduce overhead of backing device checks
  dm dust: add limited write failure mode
  dm dust: change ret to r in dust_map_read and dust_map
  dm dust: change result vars to r
  dm cache: replace spin_lock_irqsave with spin_lock_irq
  dm bio prison: replace spin_lock_irqsave with spin_lock_irq
  dm thin: replace spin_lock_irqsave with spin_lock_irq
  dm clone: add bucket_lock_irq/bucket_unlock_irq helpers
  dm clone: replace spin_lock_irqsave with spin_lock_irq
  dm writecache: handle REQ_FUA
  dm writecache: fix uninitialized variable warning
  dm stripe: use struct_size() in kmalloc()
  dm raid: streamline rs_get_progress() and its raid_status() caller side
  dm raid: simplify rs_setup_recovery call chain
  dm raid: to ensure resynchronization, perform raid set grow in preresume
  ...

Pull disk revalidation updates from Jens Axboe:
 "This continues the work that Jan Kara started to thoroughly cleanup
  and consolidate how we handle rescans and revalidations"

* tag 'for-5.5/disk-revalidate-20191122' of git://git.kernel.dk/linux-block:
  block: move clearing bd_invalidated into check_disk_size_change
  block: remove (__)blkdev_reread_part as an exported API
  block: fix bdev_disk_changed for non-partitioned devices
  block: move rescan_partitions to fs/block_dev.c
  block: merge invalidate_partitions into rescan_partitions
  block: refactor rescan_partitions

Pull zoned block device update from Jens Axboe:
 "Enhancements and improvements to the zoned device support"

* tag 'for-5.5/zoned-20191122' of git://git.kernel.dk/linux-block:
  scsi: sd_zbc: Remove set but not used variable 'buflen'
  block: rework zone reporting
  scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()
  null_blk: Add zone_nr_conv to features
  null_blk: clean up report zones
  null_blk: clean up the block device operations
  block: Remove partition support for zoned block devices
  block: Simplify report zones execution
  block: cleanup the !zoned case in blk_revalidate_disk_zones
  block: Enhance blk_revalidate_disk_zones()