- 17 Dec, 2015 3 commits
-
-
Eric Dumazet authored
Yuchung tracked a regression caused by commit 57be5bda ("ip: convert tcp_sendmsg() to iov_iter primitives") for TCP Fast Open. Some Fast Open users do not actually add any data in the SYN packet. Fixes: 57be5bda ("ip: convert tcp_sendmsg() to iov_iter primitives") Reported-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by:
David S. Miller <davem@davemloft.net>
-
Rainer Weikusat authored
With b3ca9b02, the AF_UNIX SOCK_STREAM receive code was changed from using mutex_lock(&u->readlock) to mutex_lock_interruptible(&u->readlock) to prevent signals from being delayed for an indefinite time if a thread sleeping on the mutex happened to be selected for handling the signal. But this was never a problem with the stream receive code (as opposed to its datagram counterpart) as that never went to sleep waiting for new messages with the mutex held and thus, wouldn't cause secondary readers to block on the mutex waiting for the sleeping primary reader. As the interruptible locking makes the code more complicated in exchange for no benefit, change it back to using mutex_lock. Signed-off-by:
Rainer Weikusat <rweikusat@mobileactivedefense.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Hannes Frederic Sowa authored
fou->udp_offloads is managed by RCU. As it is actually included inside the fou sockets, we cannot let the memory go out of scope before a grace period. We either can synchronize_rcu or switch over to kfree_rcu to manage the sockets. kfree_rcu seems appropriate as it is used by vxlan and geneve. Fixes: 23461551 ("fou: Support for foo-over-udp RX path") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
-
- 16 Dec, 2015 8 commits
-
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2015-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Another set of fixes: * memory leak fixes (from Ola) * operating mode notification spec compliance fix (from Eyal) * copy rfkill names in case pointer becomes invalid (myself) * two hardware restart fixes (myself) * get rid of "limiting TX power" log spam (myself) ==================== Signed-off-by:
-
Martin Roth authored
The patch fixes FCC port lock-up, which occurs as a result of a bug during underrun/collision handling. Within the tx_startup() function in mac-fcc.c, the address of last BD is not calculated correctly. As a result of wrong calculation of the last BD address, the next transmitted BD may be set to an area out of the transmit BD ring. This actually causes to port lock-up and it is not recoverable. Signed-off-by:
Martin Roth <martin.roth@motorolasolutions.com> Signed-off-by:
-
Hamish Martin authored
After commit 15bf176d ("gianfar: Don't enable the Filer w/o the Parser"), 'TSEC' model controllers (for example as seen on MPC8541E) always have 8 bytes stripped from the front of received frames. Only 'eTSEC' gianfar controllers have the RX Filer capability (amongst other enhancements). Previously this was treated as always enabled for both 'TSEC' and 'eTSEC' controllers. In commit 15bf176d ("gianfar: Don't enable the Filer w/o the Parser") a subtle change was made to the setting of 'uses_rxfcb' to effectively always set it (since 'rx_filer_enable' was always true). This had the side-effect of always stripping 8 bytes from the front of received frames on 'TSEC' type controllers. We now only enable the RX Filer capability on controller types that support it, thereby avoiding the issue for 'TSEC' type controllers. Reviewed-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by:
Hamish Martin <hamish.martin@alliedtelesis.co.nz> Reviewed-by:
Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by:
-
Hannes Frederic Sowa authored
Docbook does not like the definition of macros inside a field declaration and adds a warning. Move the definition out. Fixes: 79462ad0 ("net: add validation for the socket syscall protocol argument") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Herbert Xu authored
The commit ba7c95ea ("rhashtable: Fix sleeping inside RCU critical section in walk_stop") introduced a new spinlock for the walker list. However, it did not convert all existing users of the list over to the new spin lock. Some continued to use the old mutext for this purpose. This obviously led to corruption of the list. The fix is to use the spin lock everywhere where we touch the list. This also allows us to do rcu_rad_lock before we take the lock in rhashtable_walk_start. With the old mutex this would've deadlocked but it's safe with the new spin lock. Fixes: ba7c95ea ("rhashtable: Fix sleeping inside RCU...") Reported-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
William Hua <william.hua@canonical.com> wrote: > > I wasn't aware there was an enforced minimum size. I simply set the > nelem_hint in the rhastable_params struct to 1, expecting it to grow as > needed. This caused a segfault afterwards when trying to insert an > element. OK we're doing the size computation before we enforce the limit on min_size. ---8<--- We need to do the initial hash table size computation after we have obtained the correct min_size/max_size parameters. Otherwise we may end up with a hash table whose size is outside the allowed envelope. Fixes: a998f712 ("rhashtable: Round up/down min/max_size to...") Reported-by:
William Hua <william.hua@canonical.com> Signed-off-by:
-
Eric Dumazet authored
David Ahern added a vif field in the a4 part of inetpeer_addr struct. This broke IPv4 TCP fast open client side and more generally tcp metrics cache, because inetpeer_addr_cmp() is now comparing two u32 instead of one. inetpeer_set_addr_v4() needs to properly init vif field, otherwise the comparison result depends on uninitialized data. Fixes: 192132b9 ("net: Add support for VRFs to inetpeer cache") Reported-by:
-
Hannes Frederic Sowa authored
Bjørn reported that while we switch all interfaces to privacy stable mode when setting the secret, we don't set this mode for new interfaces. This does not make sense, so change this behaviour. Fixes: 622c81d5 ("ipv6: generation of stable privacy addresses for link-local and autoconf") Reported-by:
Bjørn Mork <bjorn@mork.no> Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
- 15 Dec, 2015 27 commits
-
-
tadeusz.struk@intel.com authored
msg_iocb needs to be initialized on the recv/recvfrom path. Otherwise afalg will wrongly interpret it as an async call. Cc: stable@vger.kernel.org Reported-by:
Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
-
David S. Miller authored
Signed-off-by: -
Eric Dumazet authored
Stas Nichiporovich reported a regression in his HFSC qdisc setup on a non multi queue device. It turns out I mistakenly added a TCQ_F_NOPARENT flag on all qdisc allocated in qdisc_create() for non multi queue devices, which was rather buggy. I was clearly mislead by the TCQ_F_ONETXQUEUE that is also set here for no good reason, since it only matters for the root qdisc. Fixes: 4eaf3b84 ("net_sched: fix qdisc_tree_decrease_qlen() races") Reported-by:
Stas Nichiporovich <stasn77@gmail.com> Tested-by:
-
David S. Miller authored
Paul Bolle says: ==================== ser_gigaset: fix deallocation of platform device structure Sascha Levin reported that the syzkaller fuzzer triggered a WARNING in ser_gigaset (see https://lkml.kernel.org/g/56587467.8050102@oracle.com ). It turned out that ser_gigaset has always deallocated its platform device structure incorrectly. Tilman submitted the patch that fixes that (3/4) and a related cleanup (4/4). Tilman also submitted a minor cleanup of some NULL checks (1/4) that prompted Alan to turn those checks into WARN_ONs (2/4). If no one hits these WARN_ONs in the next couple of releases these WARN_ONs should be removed. ==================== Signed-off-by:
-
Tilman Schmidt authored
device->platform_data and platform_device->resource are never used and remain NULL through their entire life. Drops the kfree() calls for them from the device release method. Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Tilman Schmidt authored
When shutting down the device, the struct ser_cardstate must not be kfree()d immediately after the call to platform_device_unregister() since the embedded struct platform_device is still in use. Move the kfree() call to the release method instead. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Alan Cox authored
These checks do nothing useful to protect the code from races. On the other hand if the old code has been masking a real bug we would like to know about it. The check for tiocmset is kept because it is valid for a tty driver to have a NULL tiocmset method. That in itself is probably a mistake given modern coding practices - but needs fixing in the tty layer. Signed-off-by:
Alan Cox <alan@linux.intel.com> Acked-by:
-
Tilman Schmidt authored
Commit f34d7a5b ("tty: The big operations rework") changed tty->driver to tty->ops but left NULL checks for tty->driver untouched. Fix. Signed-off-by:
-
Dan Carpenter authored
The problem here is that at the end of the loop we test for if idc->vnic_wait_limit is zero, but since idc->vnic_wait_limit-- is a post-op, it actually ends up set to (u8)-1. I have fixed this by moving the decrement inside the loop. Fixes: 486a5bc7 ('qlcnic: Add support for 83xx suspend and resume.') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
We test for if "tries" is zero at the end but "tries--" is a post-op so it will end with "tries" set to -1. I have changed it to a pre-op instead. Signed-off-by:
-
Dan Carpenter authored
The problem here is that after the loop we test for "if (!i) " but because "i--" is a post-op we exit with i set to -1. I have fixed this by changing it to a pre-op instead. I had to change the starting value from 3 to 4 so that we still iterate 3 times. Signed-off-by:
-
Dan Carpenter authored
At the end of the loop we test "if (!count)" but because "count--" is a post-op then the loop will end with count set to -1. I have fixed this by changing it to --count. Fixes: c5aa9e3b ('amd-xgbe: Initial AMD 10GbE platform driver') Signed-off-by:
-
Dan Carpenter authored
There are two issue here. 1) cnt starts as maxloop + 1 so all these loops iterate one more time than intended. 2) At the end of the loop we test for "if (maxloop && !cnt)" but for the first two loops, we end with cnt equal to -1. Changing this to a pre-op means we end with cnt set to 0. Fixes: cae86d4a ('mISDN: Add driver for Infineon ISDN chipset family') Signed-off-by: -
Andrzej Hajda authored
The function can return negative values, so its result should be assigned to signed variable. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Fixes: fc48866f7 ('net/mlx4: Adapt code for N-Port VF') Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Acked-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Eyal Shapira authored
An AP can send an operating channel width change in a beacon opmode notification IE as long as there's a change in the nss as well (See 802.11ac-2013 section 10.41). So don't limit updating to nss only from an opmode notification IE. Signed-off-by:
Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
When the AP is advertising limited TX power, the message can be printed over and over again. Suppress it when the power level isn't changing. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=106011Signed-off-by:
-
Johannes Berg authored
During reprogramming, mac80211 currently first adds all the channel contexts, then binds them to the vifs and then goes to reconfigure all the interfaces. Drivers might, perhaps implicitly, rely on the operation order for certain things that typically happen within a single function elsewhere in mac80211. To avoid problems with that, reorder the code in mac80211's restart/reprogramming to work fully within the interface loop so that the order of operations is like in normal operation. For iwlwifi, this fixes a firmware crash when reprogramming with an AP/GO interface active. Reported-by:
David Spinadel <david.spinadel@intel.com> Signed-off-by:
-
Johannes Berg authored
When reconfiguration during resume fails while a scan is pending for completion work, that work will never run, and the scan will be stuck forever. Factor out the code to recover this and call it also in ieee80211_handle_reconfig_failure(). Signed-off-by: -
Ola Olsson authored
Free cached keys if the last early return path is taken. Signed-off-by:
Ola Olsson <ola.olsson@sonymobile.com> Signed-off-by:
-
Ola Olsson authored
Compared to cfg80211_rdev_free_wowlan in core.h, the error goto label lacks the freeing of nd_config. Fix that. Signed-off-by:
-
Ola Olsson authored
The first leak occurs when entering the default case in the switch for the initiator in set_regdom. The second leaks a platform_device struct if the platform registration in regulatory_init succeeds but the sub sequent regulatory hint fails due to no memory. Signed-off-by:
-
Vlad Yasevich authored
skb_reorder_vlan_header is called after the vlan header has been pulled. As a result the offset of the begining of the mac header has been incrased by 4 bytes (VLAN_HLEN). When moving the mac addresses, include this incrase in the offset calcualation so that the mac addresses are copied correctly. Fixes: a6e18ff1 (vlan: Fix untag operations of stacked vlans with REORDER_HEADER off) CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Patrick McHardy <kaber@trash.net> Signed-off-by:
Vladislav Yasevich <vyasevich@gmail.com> Signed-off-by:
-
WANG Cong authored
Reported-by:
Dmitry Vyukov <dvyukov@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Kazuya Mizuguchi authored
Ethernet AVB does not support 10 Mbps transfer speed. Signed-off-by:
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by:
Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by:
-
Sergei Shtylyov authored
The driver never calls cpu_to_edmac() when writing the descriptor address and edmac_to_cpu() when reading it, although it should -- fix this. Note that the frame/buffer length descriptor field accesses also need fixing but since they are both 16-bit we can't use {cpu|edmac}_to_{edmac|cpu}()... Signed-off-by:Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
For the little-endian SH771x kernels the driver has to byte-swap the RX/TX buffers, however yet unset physcial address from the TX descriptor is used to call sh_eth_soft_swap(). Use 'skb->data' instead... Fixes: 31fcb99d ("net: sh_eth: remove __flush_purge_region") Signed-off-by:
-
Eric Dumazet authored
David Wilder reported crashes caused by dst reuse. <quote David> I am seeing a crash on a distro V4.2.3 kernel caused by a double release of a dst_entry. In ipv4_dst_destroy() the call to list_empty() finds a poisoned next pointer, indicating the dst_entry has already been removed from the list and freed. The crash occurs 18 to 24 hours into a run of a network stress exerciser. </quote> Thanks to his detailed report and analysis, we were able to understand the core issue. IP early demux can associate a dst to skb, after a lookup in TCP/UDP sockets. When socket cache is not properly set, we want to store into sk->sk_dst_cache the dst for future IP early demux lookups, by acquiring a stable refcount on the dst. Problem is this acquisition is simply using an atomic_inc(), which works well, unless the dst was queued for destruction from dst_release() noticing dst refcount went to zero, if DST_NOCACHE was set on dst. We need to make sure current refcount is not zero before incrementing it, or risk double free as David reported. This patch, being a stable candidate, adds two new helpers, and use them only from IP early demux problematic paths. It might be possible to merge in net-next skb_dst_force() and skb_dst_force_safe(), but I prefer having the smallest patch for stable kernels : Maybe some skb_dst_force() callers do not expect skb->dst can suddenly be cleared. Can probably be backported back to linux-3.6 kernels Reported-by:
David J. Wilder <dwilder@us.ibm.com> Tested-by:
-
- 14 Dec, 2015 2 commits
-
-
Sergei Shtylyov authored
Commit 3365711d ("sh_eth: WARN on access to a register not implemented in in a particular chip") added WARN_ON() to sh_eth_{read|write}(), thus making it unacceptable for these functions to be *inline* anymore. Remove *inline* and move the functions from the header to the driver itself. Below is our code economy with ARM gcc 4.7.3: $ size drivers/net/ethernet/renesas/sh_eth.o{~,} text data bss dec hex filename 32489 1140 0 33629 835d drivers/net/ethernet/renesas/sh_eth.o~ 25413 1140 0 26553 67b9 drivers/net/ethernet/renesas/sh_eth.o Suggested-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Chen-Yu Tsai authored
dwmac-sunxi has 2 callbacks that were called from stmmac_platform as part of the probe and remove sequences. Ater the conversion of dwmac-sunxi into a standalone platform driver, the .init function is called before calling into the stmmac driver core, but .exit is not called to clean up if stmmac returns an error. This patch fixes the probe error path. This properly cleans up and releases resources when the driver core fails to probe. Cc: Joachim Eastwood <manabian@gmail.com> Fixes: 9a9e9a1e ("stmmac: dwmac-sunxi: turn setup callback into a probe function") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
