- 02 May, 2018 21 commits
-
-
Takashi Iwai authored
Historically USB-audio driver sets the card's longname field with the details of the device and the bus information. It's good per se, but not preferable when it's referred as the identifier for UCM profile. This patch adds a quirk profile_name field to override the card's longname string to a pre-defined one, so that one can create a unique and consistent ID string for the specific USB device via a quirk table to be used as a UCM profile name. The patch does a slight code refactoring to split out the functions to set shortname and longname fields as well. Signed-off-by:Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
This patch adds "Keep Interface" control for each USB-audio device. The control element is with SND_CTL_IFACE_CARD, so that it won't appear on any sane mixer applications. For a device that is confirmed to work well with "keep-interface" mode, user can flip the control via amixer, e.g. % amixer -c1 cset iface=CARD,name='Keep Interface' on and save/restore the state via alsactl. The reason to provide this via control API is that the behavior must be pretty depending on the device (and the firmware in it), so it's not ideal to apply via module option. For a device that certainly works, we may set it statically via a quirk table entry. But a device like Dell WD15 dock behaves so differently depending on the firmware, and we can't set it statically. So leave this as a dynamic switch each user can adjust freely. Signed-off-by: -
Takashi Iwai authored
Introduce a new flag to struct snd_usb_audio for allowing the device to skip usb_set_interface() calls at changing or closing the stream. As of this patch, the flag is nowhere set, so it's just a place holder. The dynamic switching will be added in the following patch. A background information for this change: Dell WD15 dock with Realtek chip gives a very long pause at each time the driver changes the altset, which eventually happens at every PCM stream open/close and parameter change. As the long pause happens in each usb_set_interface() call, there is nothing we can do as long as it's called. The workaround is to reduce calling it as much as possible, and this flag indicates that behavior. Signed-off-by: -
Takashi Iwai authored
This is a preliminary change for the upcoming quirk implementation. Currently USB-audio driver tries to call usb_set_interface() whenever the format change with interface/altset modification happens. In this patch, the check is replaced with the comparison of cur_altsetting and the targeted altsetting pointer, so that the driver may skip the unnecessary function calls. Signed-off-by: -
Takashi Iwai authored
In the early commit adcdd0d5 ("ALSA: usb-audio: Skip volume controls triggers hangup on Dell USB Dock"), we add the mixer quirks for Dell dock to skip two mixer FU's for playback. This supposed that the device has always the proper initial volume, but it doesn't seem always correct. This patch adds the explicit initialization of the volumes to the fixed 0dB at the device probe time. Also, such a fixup is needed after the resume, so a new function is hooked to the resume callback as well. Bugzilla: http://bugzilla.suse.com/show_bug.cgi?id=1089467Signed-off-by:
-
Takashi Sakamoto authored
At present, to add PCM substreams for each of available tx/rx streams, this driver uses a condition based on model-name. This is not enough to support unknown models. In former commits, this driver gains cache of stream formats. For models which support protocol extension, all of available steam formats are cached. For known models, hard-coded stream formats are used to generate the cache. For unknown models, stream formats at current mode of sampling transmission frequency is cached. Anyway, at least, the cached formats are used to expose constrains of PCM substreams for userspace applications. Thus, The cached data can be also used to add PCM substreams themselves, instead of the name-based conditions. This commit obsoletes local frag of force_two_pcms. Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
-
Takashi Sakamoto authored
In former commits, proxy structure gets members for cache of stream formats. The cache allows to apply correct constraints and rules to runtime of PCM substream. They allows userspace applications to change current sampling transmission frequency. This commit uses the cacher for the PCM constraints and rules. Signed-off-by:
-
Takashi Sakamoto authored
In former commits, proxy structure gets members for cache of stream formats. The cache can be used to count the number of MIDI substreams to add. This commit uses the cache for this purpose. Signed-off-by:
-
Takashi Sakamoto authored
This is a preparation for userspace applications to change current sampling transmission frequency via ALSA PCM interface. Signed-off-by:
-
Takashi Sakamoto authored
This commit is a small refactoring for better readability. Signed-off-by:
-
Takashi Sakamoto authored
At present, to check running stream, available stream formats are used at current sampling transmission frequency (stf). But when changing stf, it's convenient to use cache of stream formats. This commit applies this idea. Signed-off-by:
-
Takashi Sakamoto authored
TC Applied Technologies (TCAT) have added extension to DICE protocol. This protocol extension is called as Extended Application Protocol, a.k.a. EAP. In this protocol extension, units get additional 9 address spaces. One of it is for current configuration. In this address space, a pair of router and stream formats are exposed per mode of three sampling transmission frequencies. This commit adds support the protocol extension for address space of the current configuration to generate cache of stream formats. Signed-off-by:
-
Takashi Sakamoto authored
Alesis shipped some models with DICE ASICs. All of them just support DICE original protocol and drivers can't retrieve all of available stream formats without changing status of sampling transmission frequency actually. This commit puts some hard-coded parameters for the models. When detecting the models, the corresponding parameters are copied as cache of stream formats. I note that each of pair of iO14/iO26 and MultiMix 8/12/16 has the same model ID on their configuration ROM. The MultiMix 8/12/16 just support one mode for sampling transmission frequency and ALSA dice driver already handles them correctly. The iO14/iO26 support three modes and need hard-coded parameters. To distinguish these two models, this commit let the driver to retrieve current stream formats and compare it to known parameters, then decide it. Signed-off-by:
-
Takashi Sakamoto authored
TC Electronic shipped some models with DICE ASICs. All of them just support DICE original protocol and drivers can't retrieve all of available stream formats without changing status of sampling transmission frequency actually. This commit puts some hard-coded parameters for the models. When detecting the models, the corresponding parameters are copied as cache of stream formats. Signed-off-by:
-
Takashi Sakamoto authored
In former commits, proxy structure get members for cache of stream formats. This commit fills the cache with stream formats at current mode of sampling transmission frequency. Signed-off-by:
-
Takashi Sakamoto authored
Products with DICE interface in market can support variable stream formats for three levels of sampling transmission frequencies. To record these formats, a proxy structure got several fields in former commit. This commit adds a proc node to output the stream formats for debugging purpose. Signed-off-by:
-
Takashi Sakamoto authored
Unlike the other drivers in ALSA firewire stack, ALSA dice driver does't create 'firewire' directory for proc nodes because it has 'dice' node only. But this is inconvenient because I have a plan to add another proc node to output available stream formats from cache. This commit let the driver to create the directory and put 'dice' node into it. Signed-off-by:
-
Takashi Sakamoto authored
A previous commit 6f688268 ('ALSA: dice: purge generating channel cache') purged cache of stream formats. DICE interface originally has no feature to assist drivers to retrieve available formats for all of supported sampling transmission frequencies, without changing the frequency actually. For later release of Dice ASICs such as TCD2210, Dice interface has extended protocol and can support the feature. This assists drivers to retrieve available stream formats. This commit is a first step to regain the cache to generate PCM rules for all of supported sampling transmission frequencies. Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in KERN_ERR error messages Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Takashi Sakamoto authored
DECLARE_TLV_DB_SCALE (alias of SNDRV_CTL_TLVD_DECLARE_DB_SCALE) is used but tlv.h is not included. This causes build failure when local macro is defined by comment-out. This commit fixes the bug. At the same time, the alias macro is replaced with a destination macro added at a commit 46e860f7 ("ALSA: rename TLV-related macros so that they're friendly to user applications") Reported-by:
Connor McAdams <conmanx360@gmail.com> Fixes: 44f0c978 ('ALSA: hda/ca0132: Add tuning controls') Signed-off-by:
-
Takashi Iwai authored
The DP-MST support requires more PCM streams than usual, hence CONFIG_SND_DYNAMIC_MINORS is almost mandatory. Currently the driver just warns and continues even if streams are missing, but it doesn't seem to enough convince users to switch to the modern setup. This patch adds the enforced selection of CONFIG_SND_DYNAMIC_MINORS from CONFIG_SND_HDA_CODEC_HDMI for covering that. Signed-off-by:
-
- 27 Apr, 2018 1 commit
-
-
Colin Ian King authored
Trivial fix to spelling mistake in module parameter description text Signed-off-by:
-
- 25 Apr, 2018 16 commits
-
-
Takashi Iwai authored
Back-merge 4.17-rc3 fixes for further development. This will bump the base to 4.17-rc2, too. Signed-off-by: -
Takashi Iwai authored
When CONFIG_SND_DYNAMIC_MINORS isn't set, there are only limited number of devices available, and HD-audio, especially with HDMI/DP codec, will fail to create more than two devices. The driver warns about the lack of such devices and skips the PCM device creations, but the HDMI driver still tries to create the corresponding JACK, SPDIF and ELD controls even for the non-existing PCM substreams. This results in confusion on user-space, and even may break the operation. Similarly, Intel HDMI/DP codec builds the ELD notification from i915 graphics driver, and this may be broken if a notification is sent for the non-existing PCM stream. This patch adds the check of the existence of the assigned PCM substream in the both scenarios above, and skips the further operation if the PCM substream is not assigned. Fixes: 9152085d ("ALSA: hda - add DP MST audio support") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
Merge tag 'asoc-fix-4.17-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.17 A small batch of fixes collected since the merge window, none of which are particularly large or remarkable. They've all been cooking in -next for a while.
-
Kailang Yang authored
On this Lenovo ThinkCentre machine. There are two front mics, we change the location for one of them. Relation: f33f79f3 ("ALSA: hda/realtek - change the location for one of two front microphones") Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
As recently Smatch suggested, one place in RME9652 driver may expand the array directly from the user-space value with speculation: sound/pci/rme9652/rme9652.c:2074 snd_rme9652_channel_info() warn: potential spectre issue 'rme9652->channel_map' (local cap) This patch puts array_index_nospec() for hardening against it. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
As recently Smatch suggested, a couple of places in HDSP MADI driver may expand the array directly from the user-space value with speculation: sound/pci/rme9652/hdspm.c:5717 snd_hdspm_channel_info() warn: potential spectre issue 'hdspm->channel_map_out' (local cap) sound/pci/rme9652/hdspm.c:5734 snd_hdspm_channel_info() warn: potential spectre issue 'hdspm->channel_map_in' (local cap) This patch puts array_index_nospec() for hardening against them. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2Reported-by:
-
Takashi Iwai authored
As recently Smatch suggested, a couple of places in ASIHPI driver may expand the array directly from the user-space value with speculation: sound/pci/asihpi/hpimsginit.c:70 hpi_init_response() warn: potential spectre issue 'res_size' (local cap) sound/pci/asihpi/hpioctl.c:189 asihpi_hpi_ioctl() warn: potential spectre issue 'adapters' This patch puts array_index_nospec() for hardening against them. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2Reported-by:
-
Takashi Iwai authored
As recently Smatch suggested, one place in OPL3 driver may expand the array directly from the user-space value with speculation: sound/drivers/opl3/opl3_synth.c:476 snd_opl3_set_voice() warn: potential spectre issue 'snd_opl3_regmap' This patch puts array_index_nospec() for hardening against it. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2Reported-by:
-
Takashi Iwai authored
As recently Smatch suggested, one place in HD-audio hwdep ioctl codes may expand the array directly from the user-space value with speculation: sound/pci/hda/hda_local.h:467 get_wcaps() warn: potential spectre issue 'codec->wcaps' As get_wcaps() itself is a fairly frequently called inline function, and there is only one single call with a user-space value, we replace only the latter one to open-code locally with array_index_nospec() hardening in this patch. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2Reported-by:
-
Takashi Iwai authored
As recently Smatch suggested, a few places in ALSA control core codes may expand the array directly from the user-space value with speculation: sound/core/control.c:1003 snd_ctl_elem_lock() warn: potential spectre issue 'kctl->vd' sound/core/control.c:1031 snd_ctl_elem_unlock() warn: potential spectre issue 'kctl->vd' sound/core/control.c:844 snd_ctl_elem_info() warn: potential spectre issue 'kctl->vd' sound/core/control.c:891 snd_ctl_elem_read() warn: potential spectre issue 'kctl->vd' sound/core/control.c:939 snd_ctl_elem_write() warn: potential spectre issue 'kctl->vd' Although all these seem doing only the first load without further reference, we may want to stay in a safer side, so hardening with array_index_nospec() would still make sense. In this patch, we put array_index_nospec() to the common snd_ctl_get_ioff*() helpers instead of each caller. These helpers are also referred from some drivers, too, and basically all usages are to calculate the array index from the user-space value, hence it's better to cover there. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2Reported-by:
-
Takashi Iwai authored
As Smatch recently suggested, a few places in OSS sequencer codes may expand the array directly from the user-space value with speculation, namely there are a significant amount of references to either info->ch[] or dp->synths[] array: sound/core/seq/oss/seq_oss_event.c:315 note_on_event() warn: potential spectre issue 'info->ch' (local cap) sound/core/seq/oss/seq_oss_event.c:362 note_off_event() warn: potential spectre issue 'info->ch' (local cap) sound/core/seq/oss/seq_oss_synth.c:470 snd_seq_oss_synth_load_patch() warn: potential spectre issue 'dp->synths' (local cap) sound/core/seq/oss/seq_oss_event.c:293 note_on_event() warn: potential spectre issue 'dp->synths' sound/core/seq/oss/seq_oss_event.c:353 note_off_event() warn: potential spectre issue 'dp->synths' sound/core/seq/oss/seq_oss_synth.c:506 snd_seq_oss_synth_sysex() warn: potential spectre issue 'dp->synths' sound/core/seq/oss/seq_oss_synth.c:580 snd_seq_oss_synth_ioctl() warn: potential spectre issue 'dp->synths' Although all these seem doing only the first load without further reference, we may want to stay in a safer side, so hardening with array_index_nospec() would still make sense. We may put array_index_nospec() at each place, but here we take a different approach: - For dp->synths[], change the helpers to retrieve seq_oss_synthinfo pointer directly instead of the array expansion at each place - For info->ch[], harden in a normal way, as there are only a couple of places As a result, the existing helper, snd_seq_oss_synth_is_valid() is replaced with snd_seq_oss_synth_info(). Also, we cover MIDI device where a similar array expansion is done, too, although it wasn't reported by Smatch. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2Reported-by:
-
Takashi Iwai authored
When get_synthdev() is called for a MIDI device, it returns the fixed midi_synth_dev without the use refcounting. OTOH, the caller is supposed to unreference unconditionally after the usage, so this would lead to unbalanced refcount. This patch corrects the behavior and keep up the refcount balance also for the MIDI synth device. Cc: <stable@vger.kernel.org> Signed-off-by: -
Kailang Yang authored
Add ALC255 its own depop functions for alc_init and alc_shutup. Assign it to ALC256 usage. Signed-off-by:
-
Kailang Yang authored
Fill COEF to change EAPD to verb control. Assigned codec type. This is an additional fix over 92f974df ("ALSA: hda/realtek - New vendor ID for ALC233"). [ More notes: according to Kailang, the chip is 10ec:0235 bonding for ALC233b, which is equivalent with ALC255. It's only used for Lenovo. The chip needs no alc_process_coef_fw() for headset unlike ALC255. ] Signed-off-by:
-
Souptick Joarder authored
Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Commit 1c8f4220 ("mm: change return type to vm_fault_t") Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by:
Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by:
-
Souptick Joarder authored
Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Commit 1c8f4220 ("mm: change return type to vm_fault_t") Signed-off-by:
-
- 24 Apr, 2018 2 commits
-
-
Michael Drake authored
The channel mapping is defined by bChRelationship, not bChPurpose. Fixes: 9a2fe9b8 ("ALSA: usb: initial USB Audio Device Class 3.0 support") Reviewed-by:
Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by:
Michael Drake <michael.drake@codethink.co.uk> Signed-off-by:
Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Signed-off-by:
-
Takashi Iwai authored
Put WARN_ON() and bail out if the given index is over the allocated array of the given SPDIF controls. It's merely a sanity check to catch any potential issues (if any). Signed-off-by:
-
