A couple of bugs crept in with the merge of smp.c...
Signed-off-by: Paul Mackerras <paulus@samba.org>

Gcc 4 doesn't like being told to inline a recursive function...
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: Paul Mackerras <paulus@samba.org>

This patch merges platform codes.  systemcfg->platform is no longer used,
systemcfg use in general is deprecated as much as possible (and renamed
_systemcfg before it gets completely moved elsewhere in a future patch),
_machine is now used on ppc64 along as ppc32.  Platform codes aren't gone
yet but we are getting a step closer. A bunch of asm code in head[_64].S
is also turned into C code.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This patch consolidates macros used to generate assembly for
compatibility across different CPUs or configs.  A new header,
asm-powerpc/asm-compat.h contains the main compatibility macros.  It
uses some preprocessor magic to make the macros suitable both for use
in .S files, and in inline asm in .c files.  Headers (bitops.h,
uaccess.h, atomic.h, bug.h) which had their own such compatibility
macros are changed to use asm-compat.h.

ppc_asm.h is now for use in .S files *only*, and a #error enforces
that.  As such, we're a lot more careless about namespace pollution
here than in asm-compat.h.

While we're at it, this patch adds a call to the PPC405_ERR77 macro in
futex.h which should have had it already, but didn't.

Built and booted on pSeries, Maple and iSeries (ARCH=powerpc).  Built
for 32-bit powermac (ARCH=powerpc) and Walnut (ARCH=ppc).
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

scanlog.c is only compiled on pSeries.  Thus, this patch moves it to
platforms/pseries.

Built and booted on pSeries LPAR (ARCH=powerpc and ARCH=ppc64).  Built
for iSeries (ARCH=powerpc).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The ppc32 and ppc64 versions of cacheflush.h were almost identical.
The two versions of cache.h are fairly similar, except for a bunch of
register definitions in the ppc32 version which probably belong better
elsewhere.  This patch, therefore, merges both headers.  Notable
points:
	- there are several functions in cacheflush.h which exist only
on ppc32 or only on ppc64.  These are handled by #ifdef for now, but
these should probably be consolidated, along with the actual code
behind them later.
	- Confusingly, both ppc32 and ppc64 have a
flush_dcache_range(), but they're subtly different: it uses dcbf on
ppc32 and dcbst on ppc64, ppc64 has a flush_inval_dcache_range() which
uses dcbf.  These too should be merged and consolidated later.
	- Also flush_dcache_range() was defined in cacheflush.h on
ppc64, and in cache.h on ppc32.  In the merged version it's in
cacheflush.h
	- On ppc32 flush_icache_range() is a normal function from
misc.S.  On ppc64, it was wrapper, testing a feature bit before
calling __flush_icache_range() which does the actual flush.  This
patch takes the ppc64 approach, which amounts to no change on ppc32,
since CPU_FTR_COHERENT_ICACHE will never be set there, but does mean
renaming flush_icache_range() to __flush_icache_range() in
arch/ppc/kernel/misc.S and arch/powerpc/kernel/misc_32.S
	- The PReP register info from asm-ppc/cache.h has moved to
arch/ppc/platforms/prep_setup.c
	- The 8xx register info from asm-ppc/cache.h has moved to a
new asm-powerpc/reg_8xx.h, included from reg.h
	- flush_dcache_all() was defined on ppc32 (only), but was
never called (although it was exported).  Thus this patch removes it
from cacheflush.h and from ARCH=powerpc (misc_32.S) entirely.  It's
left in ARCH=ppc for now, with the prototype moved to ppc_ksyms.c.

Built for Walnut (ARCH=ppc), 32-bit multiplatform (pmac, CHRP and PReP
ARCH=ppc, pmac and CHRP ARCH=powerpc).  Built and booted on POWER5
LPAR (ARCH=powerpc and ARCH=ppc64).

Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc).  Built and
booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64).  Built and booted
on G5 (ARCH=powerpc)
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

We had a "64" that didn't get changed to BITS_PER_LONG, resulting
in find_next_bit not working correctly.
Signed-off-by: Paul Mackerras <paulus@samba.org>

This adds code to work around some problems with old versions of
Open Firmware, such as on the early powermacs (7500 etc.) and the
"Longtrail" CHRP machine.  On these machines we have to claim
the physical and virtual address ranges explicitly when claiming
memory and then set up a V->P mapping.

The Longtrail has more problems: setprop doesn't work, and we have
to set an "allow-reclaim" variable to 0 in order to get claim on
physical memory ranges to fail if the memory is already claimed.
Signed-off-by: Paul Mackerras <paulus@samba.org>

14-eeh-device-bar-save.patch

After a PCI device has been resest, the device BAR's and other config
space info must be restored to the same state as they were in when
the firmware first handed us this device.  This will allow the
PCI device driver, when restarted, to correctly recognize and set up
the device.

Tis patch saves the device config space as early as reasonable after
the firmware has handed over the device.  Te state resore funcion
is inteded for use by the EEH recovery routines.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

13-eeh-recovery-support-routines.patch

EEH Recovery support routines

This patch adds routines required to help drive the recovery of
EEH-frozen slots.  The main function is to drive the PCI #RST
signal line high for a qurter of a second, and then allow for
a second & a half of settle time.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12-eeh-event-dispatcher.patch

ppc64: EEH Recovery dispatcher thread

This patch adds a mechanism to create recovery threads when an
EEH event is received.  Since an EEH freeze state may be detected
within an interrupt context, we need to get out of the interrupt
context before starting recovery. This dispatcher does this in
two steps: first, it uses a workqueue to get out, and then
lanuches a kernel thread, so that the recovery routine can
sleep for exteded periods without upseting the keventd.

A kernel thread is created with each EEH event, rather than
having one long-running daemon started at boot time.  This is
because it is anticipated that EEH events will be very rare
(very very rare, ideally) and so its pointless to cluter the
process tables with a daemon that will almost never run.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

11-eeh-move-to-powerpc.patch

Move arch/ppc64/kernel/eeh.c to arch//powerpc/platforms/pseries/eeh.c
No other changes (except for Makefile to build it)
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

10-EEH-enable-bugfix.patch

Bugfix: With the curent linux-2.6.14-rc2-git6, EEH errors are
ignored because thier detection requires an unused, uninitialized
flag to be set.  This patch removes the unused flag.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

09-hotplug-bugfix.patch

In the current 2.6.14-rc2-git6 kernel, performing a Dynamic LPAR Add
of a hotplug slot will crash the system, with the following (abbreviated)
stack trace:

cpu 0x3: Vector: 700 (Program Check) at [c000000053dff7f0]
    pc: c0000000004f5974: .__alloc_bootmem+0x0/0xb0
    lr: c0000000000258a0: .update_dn_pci_info+0x108/0x118
        c0000000000257c8 .update_dn_pci_info+0x30/0x118 (unreliable)
        c0000000000258fc .pci_dn_reconfig_notifier+0x4c/0x64
        c000000000060754 .notifier_call_chain+0x68/0x9c

The root cause was that __init __alloc_bootmem() was called long after
boot had finished, resulting in a crash because this routine is undefined
after boot time.  The patch below fixes this crash, and adds some docs to
clarify the code.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

08-eeh-spin-counter.patch

One an EEH event is triggers, all further I/O to a device is blocked (until
reset).  Bad device drivers may end up spinning in their interrupt handlers,
trying to read an interrupt status register that will never change state.
This patch moves that spin counter to a per-device structure, and adds
some diagnostic prints to help locate the bad driver.
Signed-off-by: Linas Vepstas <linas@linas.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

07-eeh-report-race.patch

When a PCI slot is isolated, all PCI functions under that slot are affected.
If hese functions have separate device drivers, the EEH isolation event
might be reported multiple times. This patch adds a lock to prevent the
racing of such multiple reports. It also marks every device under the slot
as having experienced an EEH event, so that multiple reports may be
recognized more easily.
Signed-off-by: Linas Vepstas <linas@linas.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

06-eeh-empty-slot-error.patch

Performing PCI config-space reads to empty PCI slots can lead to reports of
"permanent failure" from the firmware. Ignore permanent failures on empty slots.
Signed-off-by: Linas Vepstas <linas@linas.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

05-eeh-slot-error-detail.patch

This patch encapsulates a section of code that reports the EEH event.
The new subroutine can be used in several places to report the error.
Signed-off-by: Linas Vepstas <linas@linas.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

04-eeh-statistics.patch

This minor patch adds some statistics-gathering counters that allow the
behaviour of the EEH subsystem o be monitored. While far from perfect,
it does provide a rudimentary device that makes understanding of the
current state of the system a bit easier.
Signed-off-by: Linas Vepstas <linas@linas.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

03-eeh-addr-cache-cleanup.patch

This is a minor patch to clean up a buglet related to the PCI address cache.
(The buglet doesn't manifes itself unless there are also bugs elsewhere,
which is why its minor.).  Also:

-- Improved debug printing.
-- Declare some private routines as static
-- Adds reference counting to struct pci_dn->pcidev structure
Signed-off-by: Linas Vepstas <linas@linas.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

02-eeh-minor-cleanup.patch

This patch performs some minor cleanup of the eeh.c file, including:
-- trim some trailing whitespace
-- remove extraneous #includes
-- use the macro PCI_DN uniformly, instead of the void pointer chase.
-- typos in comments
-- improved debug printk's
Signed-off-by: Linas Vepstas <linas@linas.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

01-pci-dn-uniformization.patch

This patch changes the rtas_pci interface to use the new struct pci_dn
structure for two routines that work with pci device nodes.

This patch also does some minor janitorial work: it uses some handy macros
and cleans up some trailing whitespace in the affected file.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Early calls to __ioremap() will panic if the hash insertion fails. This
patch makes them return NULL instead. It happens with some pSeries users
who enabled CONFIG_BOOTX_TEXT. The later is getting an incorrect address
for the fame buffer and the hash insertion fails. With this patch, it
will display an error instead of crashing at boot.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Fix a few compile warnings

arch/ppc64/boot/addRamDisk.c:166: warning: int format, long unsigned int arg (arg 2)
arch/ppc64/boot/addRamDisk.c:170: warning: int format, long unsigned int arg (arg 2)
arch/ppc64/boot/addRamDisk.c:265: warning: unsigned int format, long unsigned int arg (arg 2)
arch/ppc64/boot/addRamDisk.c:302: warning: unsigned int format, long unsigned int arg (arg 3)
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

A stripped vmlinux does not contain enough symbols to recreate the
System.map.  The System.map file is only used to determine the end of
the runtime memory size.  This is the same value (rounded up to
PAGE_SIZE) as ->memsiz in the ELF program header.

Also, the target vmlinux.initrd doesnt work in 2.6.14:

  arch/ppc64/boot/addRamDisk arch/ppc64/boot/ramdisk.image.gz vmlinux.strip arch/ppc64/boot/vmlinux.initrd
  Name of vmlinux output file missing.
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Use a local variable for the input filenames.
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Remove initialization of local variables.
They get all values assigned before use.
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Due to the recent update of the platform code, some platform device 
drivers fail to compile. This fix is for fs_enet, adding #include of a 
new header, to which a number of platform stuff has been relocated.
Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Fixes ppc44x fpu support that broke from a bad arch/powerpc merge.
Instead of adding KernelFP back in (which duplicates code) we use
the same kernel fpu unavailable handler as classic PPC processors.
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This patch moves a bunch of files from arch/ppc64 and
include/asm-ppc64 which have no equivalents in ppc32 code into
arch/powerpc and include/asm-powerpc.  The file affected are:
	abs_addr.h
	compat.h
	lppaca.h
	paca.h
	tce.h
	cpu_setup_power4.S
	ioctl32.c
	firmware.c
	pacaData.c

The only changes apart from the move and corresponding Makefile
changes are:
	- #ifndef/#define in includes updated to _ASM_POWERPC_ form
	- trailing whitespace removed
	- comments giving full paths removed
	- pacaData.c renamed paca.c to remove studlyCaps
	- Misplaced { moved in lppaca.h

Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built
for 32-bit powermac (ARCH=powerpc).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This patch merges current.h.  This is a one-big-ifdef merge, but both
versions are so tiny, I think we can live with it.  While we're at it,
we get rid of the fairly pointless redirection through get_current()
in the ppc64 version.

Built and booted on POWER5 LPAR (ARCH=powerpc & ARCH=ppc64).  Built
for 32-bit pmac (ARCH=powerpc & ARCH=ppc).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Having already merged the ppc and ppc64 versions of signal.c, this
patch finishes the job by merging signal.h.  The two versions were
almost identical already.  Notable changes:
	- We use BITS_PER_LONG to correctly size sigset_t
	- Remove some uneeded #includes and struct forward
declarations.  This does mean adding an include to signal_32.c which
relied on the indirect inclusion of sigcontext.h
	- As the ppc64 version, the merged signal.h has prototypes for
do_signal() and do_signal32().  Thus remove extra prototypes from
ppc_ksyms.c which had them directly.

Built and booted on POWER5 LPAR (ARCH=ppc64 and ARCH=powerpc).  Built
for 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

AGP shouldn't use "global_flush_tlb()" to flush the AGP mappings, that i
spurely an x86'ism.  The proper AGP mapping flusher that should be used
is "flush_agp_mappings()", which on x86 obviously happens to do a global
TLB flush.

This makes AGP (or at least the config _I_ happen to use) compile again
on ppc64.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Ken-ichirou MATSUZAWA <chamas@h4.dion.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>