Skip to content

L
linux
Switch branch/tag
  1. 14 Mar, 2017 1 commit
  3. 10 Mar, 2017 2 commits
  5. 09 Mar, 2017 7 commits
    • Shaohua Li's avatar
      md/raid1/10: fix potential deadlock · 61eb2b43
      Shaohua Li authored 
      Neil Brown pointed out a potential deadlock in raid 10 code with
bio_split/chain. The raid1 code could have the same issue, but recent
barrier rework makes it less likely to happen. The deadlock happens in
below sequence:

1. generic_make_request(bio), this will set current->bio_list
2. raid10_make_request will split bio to bio1 and bio2
3. __make_request(bio1), wait_barrer, add underlayer disk bio to
current->bio_list
4. __make_request(bio2), wait_barrer

If raise_barrier happens between 3 & 4, since wait_barrier runs at 3,
raise_barrier waits for IO completion from 3. And since raise_barrier
sets barrier, 4 waits for raise_barrier. But IO from 3 can't be
dispatched because raid10_make_request() doesn't finished yet.

The solution is to adjust the IO ordering. Quotes from Neil:
"
It is much safer to:

    if (need to split) {
        split = bio_split(bio, ...)
        bio_chain(...)
        make_request_fn(split);
        generic_make_request(bio);
   } else
        make_request_fn(mddev, bio);

This way we first process the initial section of the bio (in 'split')
which will queue some requests to the underlying devices.  These
requests will be queued in generic_make_request.
Then we queue the remainder of the bio, which will be added to the end
of the generic_make_request queue.
Then we return.
generic_make_request() will pop the lower-level device requests off the
queue and handle them first.  Then it will process the remainder
of the original bio once the first section has been fully processed.
"

Note, this only happens in read path. In write path, the bio is flushed to
underlaying disks either by blk flush (from schedule) or offladed to raid1/10d.
It's queued in current->bio_list.

Cc: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org (v3.14+, only the raid10 part)
Suggested-by: default avatarNeilBrown <neilb@suse.com>
Reviewed-by: default avatarJack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: default avatarShaohua Li <shli@fb.com>
      61eb2b43
    • NeilBrown's avatar
      md: don't impose the MD_SB_DISKS limit on arrays without metadata. · 1b3bae49
      NeilBrown authored 
      These arrays, created with "mdadm --build" don't benefit from a limit.
The default will be used, which is '0' and is interpreted as "don't
impose a limit".

Reported-by: ian_bruce@mail.ru
Signed-off-by: default avatarNeilBrown <neilb@suse.com>
Signed-off-by: default avatarShaohua Li <shli@fb.com>
      1b3bae49
    • Guoqing Jiang's avatar
      md: move funcs from pers->resize to update_size · c9483634
      Guoqing Jiang authored 
      raid1_resize and raid5_resize should also check the
mddev->queue if run underneath dm-raid.

And both set_capacity and revalidate_disk are used in
pers->resize such as raid1, raid10 and raid5. So
move them from personality file to common code.
Reviewed-by: default avatarNeilBrown <neilb@suse.com>
Signed-off-by: default avatarGuoqing Jiang <gqjiang@suse.com>
Signed-off-by: default avatarShaohua Li <shli@fb.com>
      c9483634
    • Guoqing Jiang's avatar
      md-cluster: remove useless memset from gather_all_resync_info · 75df023f
      Guoqing Jiang authored 
      This memset is not needed.  The lvb is already zeroed because
it was recently allocated by lockres_init, which uses kzalloc(),
and read_resync_info() doesn't need it to be zero anyway.
Reviewed-by: default avatarNeilBrown <neilb@suse.com>
Signed-off-by: default avatarGuoqing Jiang <gqjiang@suse.com>
Signed-off-by: default avatarShaohua Li <shli@fb.com>
      75df023f
    • Guoqing Jiang's avatar
      md-cluster: free md_cluster_info if node leave cluster · 9c8043f3
      Guoqing Jiang authored 
      To avoid memory leak, we need to free the cinfo which
is allocated when node join cluster.
Reviewed-by: default avatarNeilBrown <neilb@suse.com>
Signed-off-by: default avatarGuoqing Jiang <gqjiang@suse.com>
Signed-off-by: default avatarShaohua Li <shli@fb.com>
      9c8043f3
    • Shaohua Li's avatar
      md: delete dead code · 99b3d74e
      Shaohua Li authored 
      Nobody is using mddev_check_plugged(), so delete the dead code
Signed-off-by: default avatarShaohua Li <shli@fb.com>
      99b3d74e
    • Shaohua Li's avatar
      md/raid10: submit bio directly to replacement disk · 6d399783
      Shaohua Li authored 
      Commit 57c67df4(md/raid10: submit IO from originating thread instead of
md thread) submits bio directly for normal disks but not for replacement
disks. There is no point we shouldn't do this for replacement disks.

Cc: NeilBrown <neilb@suse.com>
Signed-off-by: default avatarShaohua Li <shli@fb.com>
      6d399783
  7. 08 Mar, 2017 8 commits
    • Linus Torvalds's avatar
      Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · ea6200e8
      Linus Torvalds authored 
      Pull sched.h split-up fixes for MIPS from Ingo Molnar:
 "These are the fixes for MIPS build failures due to the sched.h
  split-up, from Arnd Bergmann"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MIPS: Add missing include files
      ea6200e8
    • Tony Luck's avatar
      mm, page_alloc: Add missing check for memory holes · b4fb8f66
      Tony Luck authored 
      Commit 13ad59df ("mm, page_alloc: avoid page_to_pfn() when merging
buddies") moved the check for memory holes out of page_is_buddy() and
had the callers do the check.

But this wasn't done correctly in one place which caused ia64 to crash
very early in boot.

Update to fix that and make ia64 boot again.

[ v2: Vlastimil pointed out we don't need to call page_to_pfn()
      since we already have the result of that in "buddy_pfn" ]

Fixes: 13ad59df ("avoid page_to_pfn() when merging buddies")
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarTony Luck <tony.luck@intel.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b4fb8f66
    • Linus Torvalds's avatar
      Merge tag 'ktest-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest · 8557b8e4
      Linus Torvalds authored 
      Pull ktest fixes from Steven Rostedt:
 "Greg Kroah-Hartman reported to me that the ktest of v4.11-rc1 locked
  up in an infinite loop while doing the make mrproper.

  Looking into the cause I noticed that a recent update to the function
  run_command (used for running all shell commands, including "make
  mrproper") changed the internal loop to use the function
  wait_for_input.

  The wait_for_input function uses select to look at two file
  descriptors. One is the file descriptor of the command it is running,
  the other is STDIN. The STDIN check was not checking the return status
  of the sysread call, and was also just writing a lot of data into
  syswrite without regard to the size of the data read.

  Changing the code to check the return status of sysread, and also to
  still process the passed in descriptor data without looping back to
  the select fixed Greg's problem.

  While looking at this code I also realized that the loop did not honor
  the timeout if STDIN always had input (or for some reason return
  error). this could prevent wait_for_input to timeout on the file
  descriptor it is suppose to be waiting for. That is fixed too"

* tag 'ktest-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Make sure wait_for_input does honor the timeout
  ktest: Fix while loop in wait_for_input
      8557b8e4
    • Linus Torvalds's avatar
      overlayfs: remove now unnecessary header file include · 04bb94b1
      Linus Torvalds authored 
      This removes the extra include header file that was added in commit
e58bc927 "Pull overlayfs updates from Miklos Szeredi" now that it
is no longer needed.

There are probably other such includes that got added during the
scheduler header splitup series, but this is the one that annoyed me
personally and I know about.
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      04bb94b1
    • Linus Torvalds's avatar
      sched/headers: fix up header file dependency on <linux/sched/signal.h> · bd0f9b35
      Linus Torvalds authored 
      The scheduler header file split and cleanups ended up exposing a few
nasty header file dependencies, and in particular it showed how we in
<linux/wait.h> ended up depending on "signal_pending()", which now comes
from <linux/sched/signal.h>.

That's a very subtle and annoying dependency, which already caused a
semantic merge conflict (see commit e58bc927 "Pull overlayfs updates
from Miklos Szeredi", which added that fixup in the merge commit).

It turns out that we can avoid this dependency _and_ improve code
generation by moving the guts of the fairly nasty helper #define
__wait_event_interruptible_locked() to out-of-line code.  The code that
includes the signal_pending() check is all in the slow-path where we
actually go to sleep waiting for the event anyway, so using a helper
function is the right thing to do.

Using a helper function is also what we already did for the non-locked
versions, see the "__wait_event*()" macros and the "prepare_to_wait*()"
set of helper functions.

We might want to try to unify all these macro games, we have a _lot_ of
subtly different wait-event loops.  But this is the minimal patch to fix
the annoying header dependency.
Acked-by: default avatarIngo Molnar <mingo@kernel.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      bd0f9b35
    • Steven Rostedt (VMware)'s avatar
      ktest: Make sure wait_for_input does honor the timeout · f7c6401f
      Steven Rostedt (VMware) authored 
      The function wait_for_input takes in a timeout, and even has a default
timeout. But if for some reason the STDIN descriptor keeps sending in data,
the function will never time out. The timout is to wait for the data from
the passed in file descriptor, not for STDIN. Adding a test in the case
where there's no data from the passed in file descriptor that checks to see
if the timeout passed, will ensure that it will timeout properly even if
there's input in STDIN.
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      f7c6401f
    • Steven Rostedt (VMware)'s avatar
      ktest: Fix while loop in wait_for_input · 99c014a8
      Steven Rostedt (VMware) authored 
      The run_command function was changed to use the wait_for_input function to
allow having a timeout if the command to run takes too much time. There was
a bug in the wait_for_input where it could end up going into an infinite
loop. There's two issues here. One is that the return value of the sysread
wasn't used for the write (to write a proper size), and that it should
continue processing the passed in file descriptor too even if there was
input. There was no check for error, if for some reason STDIN returned an
error, the function would go into an infinite loop and never exit.
Reported-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 6e98d1b4 ("ktest: Add timeout to ssh command")
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      99c014a8
    • Arnd Bergmann's avatar
      MIPS: Add missing include files · fc69910f
      Arnd Bergmann authored 
      After the split of linux/sched.h, several platforms in arch/mips stopped building.

Add the respective additional #include statements to fix the problem I first
tried adding these into asm/processor.h, but ran into circular header
dependencies with that which I could not figure out.

The commit I listed as causing the problem is the branch merge, as there is
likely a combination of multiple patches in that branch.
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: ralf@linux-mips.org
Fixes: 1827adb1 ("Merge branch 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip")
Link: http://lkml.kernel.org/r/20170308072931.3836696-1-arnd@arndb.deSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      fc69910f
  9. 07 Mar, 2017 22 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7