Earlier functions that did a similar sync are replaced by the dma_sync_sg_*
which can operate on entire SG list.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In early version of this driver, assumptions were made such as DMA layer
requires contiguous buffers etc. Due to this, new buffers were allocated,
mapped and used for DMA. These assumptions are no longer true and DMAEngine
scatter-gather DMA doesn't have such requirements. We simply the DMA operations
by directly using the scatter-gather buffers provided by the crypto layer
instead of creating our own.

Lot of logic that handled DMA'ing only X number of bytes of the total, or as
much as fitted into a 3rd party buffer is removed and is no longer required.

Also, good performance improvement of atleast ~20% seen with encrypting a
buffer size of 8K (1800 ops/sec vs 1400 ops/sec).  Improvement will be higher
for much larger blocks though such benchmarking is left as an exercise for the
reader.  Also DMA usage is much more simplified and coherent with rest of the
code.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Crypto layer only passes nbytes but number of SG elements is needed for mapping
or unmapping SGs at one time using dma_map* API and also needed to pass in for
dmaengine prep function.

We call function added to scatterwalk for this purpose in omap_aes_handle_queue
to populate the values which are used later.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When DEBUG is enabled, these macros can be used to print variables in integer
and hex format, and clearly display which registers, offsets and values are
being read/written , including printing the names of the offsets and their values.

Using statement expression macros in read path as,
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Crypto layer only passes nbytes to encrypt but in omap-aes driver we need to
know number of SG elements to pass to dmaengine slave API.  We add function for
the same to scatterwalk library.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes a bug in the nx-aes-gcm implementation.
Corrected the code so that the authtag is always verified after
decrypting and not just when there is associated data included.
Also, corrected the code to retrieve the input authtag from src
instead of dst.
Reviewed-by: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds an option to the Kconfig file for
SEC which enables the user to see the debug messages
that are printed inside the SEC driver.
Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

CAAM driver contains one macro (xstr) used for printing
the line location in a file where a memdump is done. This patch
replaces the xstr macro with the already existing __stringify
macro that performs the same function.
Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This affects xen pv guests with sufficiently old versions of xen and
sufficiently new hardware.  On such a system, a guest with a btrfs
root won't even boot.
Signed-off-by: John Haxby <john.haxby@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Adjust alignment and replace commas by semicolons in automatically
generated code.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Adjust alignment and replace commas by semicolons in automatically
generated code.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove unneeded error handling on the result of a call to
platform_get_resource when the value is passed to devm_ioremap_resource.

Move the call to platform_get_resource adjacent to the call to
devm_ioremap_resource to make the connection between them more clear.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression pdev,res,n,e,e1;
expression ret != 0;
identifier l;
@@

- res = platform_get_resource(pdev, IORESOURCE_MEM, n);
  ... when != res
- if (res == NULL) { ... \(goto l;\|return ret;\) }
  ... when != res
+ res = platform_get_resource(pdev, IORESOURCE_MEM, n);
  e = devm_ioremap_resource(e1, res);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The NX driver uses the transformation context to store several fields
containing data related to the state of the operations in progress.
Since a single tfm can be used by different kernel threads at the same
time, we need to protect the data stored into the context.

This patch makes use of spin locks to protect the data where a race
condition can happen.
Reviewed-by: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Tables used from assembler should be marked __visible to let
the compiler know.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

These local symbols are used only in this file.
Fix the following sparse warnings:

drivers/crypto/amcc/crypto4xx_alg.c:35:6: warning: symbol 'set_dynamic_sa_command_0' was not declared. Should it be static?
drivers/crypto/amcc/crypto4xx_alg.c:55:6: warning: symbol 'set_dynamic_sa_command_1' was not declared. Should it be static?
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This local symbol is used only in this file.
Fix the following sparse warnings:

drivers/crypto/sahara.c:420:6: warning: symbol 'sahara_watchdog' was not declared. Should it be static?
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

'rng_dev' is used only in this file.
Fix the following sparse warning:

drivers/char/hw_random/picoxcell-rng.c:36:15: warning: symbol 'rng_dev' was not declared. Should it be static?
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes a bug that is triggered when cts(cbc(aes)) is used with
nx-crypto driver on input larger than 32 bytes.

The chaining value from co-processor was not being saved. This value is
needed because it is used as the IV by cts(cbc(aes)).
Signed-off-by: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for OMAP4 version of TRNG module
that is present on OMAP4, AM33xx and OMAP5 SoCs.

The modules have several differences including register
offsets, output size, triggering rng and how configuring
FROs. To handle these differences, a platform_data structure
is defined and contains routine pointers, register offsets. OMAP2
specific routines are prefixed with 'omap2_' and OMAP4
specific routines are prefixed with 'omap4_'.

Note: Few Hard coded values are from the TI AM33xx SDK.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The omap_init_rng() routine in devices.c only needs to be
called when there is no device tree present.

Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add Device Tree suport to the omap-rng driver.
Currently, only support for OMAP2 and OMAP3 is
being added but support for OMAP4 and OMAP5 will
be added in a subsequent patch.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

platform_set_drvdata() is called twice in driver probe.
Removing the duplicated call.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devm_kzalloc() to make cleanup paths simpler.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

module_platform_driver() makes the code simpler.
Using the macro in the driver.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The co-processor has several limits regarding the length of
scatter/gather lists and the total number of bytes in it. These limits
are available in the device tree, as following:

 - "ibm,max-sg-len": maximum number of bytes of each scatter/gather
   list.

 - "ibm,max-sync-cop": used for synchronous operations, it is an array
   of structures that contains information regarding the limits that
   must be considered for each mode and operation. The most important
   limits in it are:
   	- The total number of bytes that a scatter/gather list can hold.
	- The maximum number of elements that a scatter/gather list can
	  have.

This patch updates the NX driver to perform several hyper calls if
needed in order to always respect the length limits for scatter/gather
lists.
Reviewed-by: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The co-processor receives data to be hashed through scatter/gather lists
pointing to physical addresses. When a vmalloc'ed data is given, the
driver must calculate the physical address to each page of the data.

However the current version of it just calculates the physical address
once and keeps incrementing it even when a page boundary is crossed.
This patch fixes this behaviour.
Reviewed-by: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch removes redundant execution of the same test suite in cases
where alg and driver variables are the same (e.g. when alg_test is
called from tcrypt_test)
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Reviewed-by: Horia Geanta <horia.geanta@freescale.com>
Reviewed-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Additional and optional dependencies not found while building the kernel and
modules, can now be declared explicitly.
Signed-off-by: Andreas Robinson <andr345@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devm_kzalloc() to make cleanup paths simpler.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Using devm_request_irq() rather than request_irq().
So removing free_irq() calls from the probe error
path and the remove handler.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for the OMAP5 version of the SHAM module
that is present on OMAP5 and AM43xx SoCs.

This module is very simialar to OMAP4 version of SHAM module,
and adds SHA384 SHA512 hardware-accelerated hash functions to it.
To handle the higher digest size of SHA512, few SHA512_DIGEST_i
(i=1-16, and first 8 registers are duplicated from SHA_DIGEST_i
registers) registers are added at the end of register set.
So adding the above register offsets and module info in pdata.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Adding support for SHA348 and SHA512 in addition to MD5, SHA1, SHA224
SHA256 that the omap sha module supports.

In order to add the support
- Removed hard coded register offsets and passing offsets from pdata
- Updating Flag offsets so that they can be used for SHA256 and SHA512
- Adding the algo info.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

clk_prepare_enable() may fail, so let's check its return value and propagate it
in the case of error.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Logging messages without newlines are possibly interleaved
with other messages.  Add terminating newlines to avoid
this.

Other miscellaneous changes:

Make arrays const to reduce data size
Add pr_fmt to prefix pr_<level>, remove now unused DEV_DBG_NAME
Coalesce formats, align arguments
Remove unnecessary OOM messages as dump_stack is already done
Remove unnecessary cast of void *
Change kzalloc(sizeof(struct)...) to kzalloc(sizeof(*var), ...)
Reduce indents in struct definitions
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove the dependency of RNG instantiation on Job Ring. Now
RNG instantiation for devices with RNG version > 4 is done
by directly programming DECO 0.
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

DESC_JOB_IO_LEN is a generic macro which indicates the space required in
the descriptor for placing SEQIN/OUT commands, job descriptor header,
shared descriptor pointer. Moving it to descriptor construction file
which can be supposedly included by different algo offload files.

Change-Id: Ic8900990d465e9079827b0c7fcacc61766d7efb6
Signed-off-by: Vakul Garg <vakul@freescale.com>
Reviewed-by: Geanta Neag Horia Ioan-B05471 <horia.geanta@freescale.com>
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull crypto update from Herbert Xu:
 - Do not idle omap device between crypto operations in one session.
 - Added sha224/sha384 shims for SSSE3.
 - More optimisations for camellia-aesni-avx2.
 - Removed defunct blowfish/twofish AVX2 implementations.
 - Added unaligned buffer self-tests.
 - Added PCLMULQDQ optimisation for CRCT10DIF.
 - Added support for Freescale's DCP co-processor
 - Misc fixes.

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (44 commits)
  crypto: testmgr - test hash implementations with unaligned buffers
  crypto: testmgr - test AEADs with unaligned buffers
  crypto: testmgr - test skciphers with unaligned buffers
  crypto: testmgr - check that entries in alg_test_descs are in correct order
  Revert "crypto: twofish - add AVX2/x86_64 assembler implementation of twofish cipher"
  Revert "crypto: blowfish - add AVX2/x86_64 implementation of blowfish cipher"
  crypto: camellia-aesni-avx2 - tune assembly code for more performance
  hwrng: bcm2835 - fix MODULE_LICENSE tag
  hwrng: nomadik - use clk_prepare_enable()
  crypto: picoxcell - replace strict_strtoul() with kstrtoul()
  crypto: dcp - Staticize local symbols
  crypto: dcp - Use NULL instead of 0
  crypto: dcp - Use devm_* APIs
  crypto: dcp - Remove redundant platform_set_drvdata()
  hwrng: use platform_{get,set}_drvdata()
  crypto: omap-aes - Don't idle/start AES device between Encrypt operations
  crypto: crct10dif - Use PTR_RET
  crypto: ux500 - Cocci spatch "resource_size.spatch"
  crypto: sha256_ssse3 - add sha224 support
  crypto: sha512_ssse3 - add sha384 support
  ...

Pull ubi fixes from Artem Bityutskiy:
 "A couple of fixes and clean-ups, allow for assigning user-defined UBI
  device numbers when attaching MTD devices by using the "mtd=" module
  parameter"

* tag 'upstream-3.11-rc1' of git://git.infradead.org/linux-ubi:
  UBI: support ubi_num on mtd.ubi command line
  UBI: fastmap break out of used PEB search
  UBI: document UBI_IOCVOLUP better in user header
  UBI: do not abort init when ubi.mtd devices cannot be found
  UBI: drop redundant "UBI error" string

Pull ubifs fix from Artem Bityutskiy:
 "Only a single patch which fixes a message"

* tag 'upstream-3.11-rc1' of git://git.infradead.org/linux-ubifs:
  UBIFS: correct mount message