- 18 Jan, 2017 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Ingo Molnar: "Fix a crash in the ARM-Exynos clocksource driver, triggered by CPU hotplug operations" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/exynos_mct: Clear interrupt when cpu is shut down
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RCU fixes from Ingo Molnar: "This fixes sporadic ACPI related hangs in synchronize_rcu() that were caused by the ACPI code mistakenly relying on an aspect of RCU that was neither promised to work nor reliable but which happened to work - until in v4.9 we changed the RCU implementation, which made the hangs more prominent. Since the mis-use of the RCU facility wasn't properly detected and prevented either, these fixes make the RCU side work reliably instead of working around the problem in the ACPI code. Hence the slightly larger diffstat that goes beyond the normal scope of RCU fixes in -rc kernels" * 'rcu-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Narrow early boot window of illegal synchronous grace periods rcu: Remove cond_resched() from Tiny synchronize_sched()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "An Intel PMU driver hotplug fix and three 'perf probe' tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Handle exclusive threadid correctly on CPU hotplug perf probe: Fix to probe on gcc generated functions in modules perf probe: Add error checks to offline probe post-processing perf probe: Fix to show correct locations for events on modules
-
- 17 Jan, 2017 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linuxLinus Torvalds authored
Pull modules fix from Jessica Yu: - fix out-of-tree module breakage when it supplies its own definitions of true and false * tag 'modules-for-v4.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: taint/module: Fix problems when out-of-kernel driver defines true or false
-
Larry Finger authored
Commit 7fd8329b ("taint/module: Clean up global and module taint flags handling") used the key words true and false as character members of a new struct. These names cause problems when out-of-kernel modules such as VirtualBox include their own definitions of true and false. Fixes: 7fd8329b ("taint/module: Clean up global and module taint flags handling") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Petr Mladek <pmladek@suse.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jessica Yu <jeyu@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Handle multicast packets properly in fast-RX path of mac80211, from Johannes Berg. 2) Because of a logic bug, the user can't actually force SW checksumming on r8152 devices. This makes diagnosis of hw checksumming bugs really annoying. Fix from Hayes Wang. 3) VXLAN route lookup does not take the source and destination ports into account, which means IPSEC policies cannot be matched properly. Fix from Martynas Pumputis. 4) Do proper RCU locking in netvsc callbacks, from Stephen Hemminger. 5) Fix SKB leaks in mlxsw driver, from Arkadi Sharshevsky. 6) If lwtunnel_fill_encap() fails, we do not abort the netlink message construction properly in fib_dump_info(), from David Ahern. 7) Do not use kernel stack for DMA buffers in atusb driver, from Stefan Schmidt. 8) Openvswitch conntack actions need to maintain a correct checksum, fix from Lance Richardson. 9) ax25_disconnect() is missing a check for ax25->sk being NULL, in fact it already checks this, but not in all of the necessary spots. Fix from Basil Gunn. 10) Action GET operations in the packet scheduler can erroneously bump the reference count of the entry, making it unreleasable. Fix from Jamal Hadi Salim. Jamal gives a great set of example command lines that trigger this in the commit message. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits) net sched actions: fix refcnt when GETing of action after bind net/mlx4_core: Eliminate warning messages for SRQ_LIMIT under SRIOV net/mlx4_core: Fix when to save some qp context flags for dynamic VST to VGT transitions net/mlx4_core: Fix racy CQ (Completion Queue) free net: stmmac: don't use netdev_[dbg, info, ..] before net_device is registered net/mlx5e: Fix a -Wmaybe-uninitialized warning ax25: Fix segfault after sock connection timeout bpf: rework prog_digest into prog_tag tipc: allocate user memory with GFP_KERNEL flag net: phy: dp83867: allow RGMII_TXID/RGMII_RXID interface types ip6_tunnel: Account for tunnel header in tunnel MTU mld: do not remove mld souce list info when set link down be2net: fix MAC addr setting on privileged BE3 VFs be2net: don't delete MAC on close on unprivileged BE3 VFs be2net: fix status check in be_cmd_pmac_add() cpmac: remove hopeless #warning ravb: do not use zero-length alignment DMA descriptor mlx4: do not call napi_schedule() without care openvswitch: maintain correct checksum state in conntrack actions tcp: fix tcp_fastopen unaligned access complaints on sparc ...
-
Linus Torvalds authored
Merge branch 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb fix from Konrad Rzeszutek Wilk: "A tiny fix to make sure that page-sized mappings are page-aligned (and not say straddle two pages). This is important for some drivers (such as NVME)" * 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: ensure that page-sized mappings are page-aligned
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "MMC core: - fix regressions detecting HS/HS DDR eMMC cards related to CMD6 MMC host: - mmc: mxs-mmc: Fix additional cycles after transmission stop - sdhci-acpi: Only powered up enabled acpi child devices - meson: avoid possible NULL dereference" * tag 'mmc-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: Restore parts of the polling policy when switch to HS/HS DDR mmc: mxs-mmc: Fix additional cycles after transmission stop mmc: sdhci-acpi: Only powered up enabled acpi child devices MMC: meson: avoid possible NULL dereference
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull MTD fixes from Brian Norris: "Just NAND updates from Boris: - avoid compiling xway NAND controller driver as a module (which didn't work) - fix tango NAND DT binding and make sure the controller is in a clean state at probe time - add dependency on HAS_IOMEM to the oxnas NAND driver - fix irq number validity check in the lpc32xx driver" * tag 'for-linus-20170116' of git://git.infradead.org/linux-mtd: mtd: nand: lpc32xx: fix invalid error handling of a requested irq mtd: nand: tango: Reset pbus to raw mode in probe mtd: nand: tango: Update DT binding description mtd: nand: oxnas_nand: fix build errors on arch/um, require HAS_IOMEM mtd: nand: xway: fix build because of module functions mtd: nand: xway: disable module support
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo-4.10-20170117' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull 'perf probe' fixes from Arnaldo Carvalho de Melo <acme@redhat.com> - Show correct locations for 'perf probe' on modules (Masami Hiramatsu) - Correctly handle 'perf probe's on GCC generated functions in modules (Masami Hiramatsu) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Zhou Chengming authored
The CPU hotplug function intel_pmu_cpu_starting() sets cpu_hw_events.excl_thread_id unconditionally to 1 when the shared exclusive counters data structure is already availabe for the sibling thread. This works during the boot process because the first sibling gets threadid 0 assigned and the second sibling which shares the data structure gets 1. But when the first thread of the core is offlined and onlined again it shares the data structure with the second thread and gets exclusive thread id 1 assigned as well. Prevent this by checking the threadid of the already online thread. [ tglx: Rewrote changelog ] Signed-off-by: Zhou Chengming <zhouchengming1@huawei.com> Cc: NuoHan Qiao <qiaonuohan@huawei.com> Cc: ak@linux.intel.com Cc: peterz@infradead.org Cc: kan.liang@intel.com Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: qiaonuohan@huawei.com Cc: davidcc@google.com Cc: guohanjun@huawei.com Link: http://lkml.kernel.org/r/1484536871-3131-1-git-send-email-zhouchengming1@huawei.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de> --- --- arch/x86/events/intel/core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
-
Joonyoung Shim authored
When a CPU goes offline a potentially pending timer interrupt is not cleared. When the CPU comes online again then the pending interrupt is delivered before the per cpu clockevent device is initialized. As a consequence the tick interrupt handler dereferences a NULL pointer. [ 51.251378] Unable to handle kernel NULL pointer dereference at virtual address 00000040 [ 51.289348] task: ee942d00 task.stack: ee960000 [ 51.293861] PC is at tick_periodic+0x38/0xb0 [ 51.298102] LR is at tick_handle_periodic+0x1c/0x90 Clear the pending interrupt in the cpu dying path. Fixes: 56a94f13 ("clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier") Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Cc: cw00.choi@samsung.com Cc: daniel.lezcano@linaro.org Cc: stable@vger.kernel.org Cc: javier@osg.samsung.com Cc: kgene@kernel.org Cc: krzk@kernel.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1484628876-22065-1-git-send-email-jy0922.shim@samsung.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Jamal Hadi Salim authored
Demonstrating the issue: .. add a drop action $sudo $TC actions add action drop index 10 .. retrieve it $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 2 bind 0 installed 29 sec used 29 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 ... bug 1 above: reference is two. Reference is actually 1 but we forget to subtract 1. ... do a GET again and we see the same issue try a few times and nothing changes ~$ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 2 bind 0 installed 31 sec used 31 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 ... lets try to bind the action to a filter.. $ sudo $TC qdisc add dev lo ingress $ sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \ u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 10 ... and now a few GETs: $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 3 bind 1 installed 204 sec used 204 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 4 bind 1 installed 206 sec used 206 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 5 bind 1 installed 235 sec used 235 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 .... as can be observed the reference count keeps going up. After the fix $ sudo $TC actions add action drop index 10 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 1 bind 0 installed 4 sec used 4 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 1 bind 0 installed 6 sec used 6 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC qdisc add dev lo ingress $ sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \ u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 10 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 2 bind 1 installed 32 sec used 32 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 2 bind 1 installed 33 sec used 33 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 Fixes: aecc5cef ("net sched actions: fix GETing actions") Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 16 Jan, 2017 27 commits
-
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: - fix invalid fget()/fput() calls when doing file locking - fix multiple directory cache invalidation issues due to the client failing to recognise that the directory wasn't changed - fix client recovery when server reboots multiple times * tag 'nfs-for-4.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Fix client recovery when server reboots multiple times NFSv4: update_changeattr should update the attribute timestamp NFSv4: Don't call update_changeattr() unless the unlink is successful NFSv4: Don't apply change_info4 twice on rename within a directory NFSv4: Call update_changeattr() from _nfs4_proc_open only if a file was created nfs: Don't take a reference on fl->fl_file for LOCK operation
-
David S. Miller authored
Tariq Toukan says: ==================== mlx4 core fixes This patchset contains bug fixes from Jack to the mlx4 Core driver. Patch 1 solves a race in the flow of CQ free. Patch 2 moves some qp context flags update to the correct qp transition. Patch 3 eliminates warnings from the path of SRQ_LIMIT that flood the message log, and keeps them only in the path of SRQ_CATAS_ERROR. Series generated against net commit: 1a717fcf Merge tag 'mac80211-for-davem-2017-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jack Morgenstein authored
When running SRIOV, warnings for SRQ LIMIT events flood the Hypervisor's message log when (correct, normally operating) apps use SRQ LIMIT events as a trigger to post WQEs to SRQs. Add more information to the existing debug printout for SRQ_LIMIT, and output the warning messages only for the SRQ CATAS ERROR event. Fixes: acba2420 ("mlx4_core: Add wrapper functions and comm channel and slave event support to EQs") Fixes: e0debf9c ("mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jack Morgenstein authored
Save the qp context flags byte containing the flag disabling vlan stripping in the RESET to INIT qp transition, rather than in the INIT to RTR transition. Per the firmware spec, the flags in this byte are active in the RESET to INIT transition. As a result of saving the flags in the incorrect qp transition, when switching dynamically from VGT to VST and back to VGT, the vlan remained stripped (as is required for VST) and did not return to not-stripped (as is required for VGT). Fixes: f0f829bf ("net/mlx4_core: Add immediate activate for VGT->VST->VGT") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jack Morgenstein authored
In function mlx4_cq_completion() and mlx4_cq_event(), the radix_tree_lookup requires a rcu_read_lock. This is mandatory: if another core frees the CQ, it could run the radix_tree_node_rcu_free() call_rcu() callback while its being used by the radix tree lookup function. Additionally, in function mlx4_cq_event(), since we are adding the rcu lock around the radix-tree lookup, we no longer need to take the spinlock. Also, the synchronize_irq() call for the async event eliminates the need for incrementing the cq reference count in mlx4_cq_event(). Other changes: 1. In function mlx4_cq_free(), replace spin_lock_irq with spin_lock: we no longer take this spinlock in the interrupt context. The spinlock here, therefore, simply protects against different threads simultaneously invoking mlx4_cq_free() for different cq's. 2. In function mlx4_cq_free(), we move the radix tree delete to before the synchronize_irq() calls. This guarantees that we will not access this cq during any subsequent interrupts, and therefore can safely free the CQ after the synchronize_irq calls. The rcu_read_lock in the interrupt handlers only needs to protect against corrupting the radix tree; the interrupt handlers may access the cq outside the rcu_read_lock due to the synchronize_irq calls which protect against premature freeing of the cq. 3. In function mlx4_cq_event(), we change the mlx_warn message to mlx4_dbg. 4. We leave the cq reference count mechanism in place, because it is still needed for the cq completion tasklet mechanism. Fixes: 6d90aa5c ("net/mlx4_core: Make sure there are no pending async events when freeing CQ") Fixes: 225c7b1f ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Don't use netdev_info and friends before the net_device is registered. This avoids ugly messages like "meson8b-dwmac c9410000.ethernet (unnamed net_device) (uninitialized): Enable RX Mitigation via HW Watchdog Timer" Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
As found by Olof's build bot, we gain a harmless warning about a potential uninitialized variable reference in mlx5: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c: In function 'parse_tc_fdb_actions': drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:769:13: warning: 'out_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:811:21: note: 'out_dev' was declared here This was introduced through the addition of an 'IS_ERR/PTR_ERR' pair that gcc is unfortunately unable to completely figure out. The problem being gcc cannot tell that if(IS_ERR()) in mlx5e_route_lookup_ipv4() is equivalent to checking if(err) later, so it assumes that 'out_dev' is used after the 'return PTR_ERR(rt)'. The PTR_ERR_OR_ZERO() case by comparison is fairly easy to detect by gcc, so it can't get that wrong, so it no longer warns. Hadar Hen Zion already attempted to fix the warning earlier by adding fake initializations, but that ended up not fully addressing all warnings, so I'm reverting it now that it is no longer needed. Link: http://arm-soc.lixom.net/buildlogs/mainline/v4.10-rc3-98-gcff3b2c/ Fixes: a42485eb ("net/mlx5e: TC ipv4 tunnel encap offload error flow fixes") Fixes: a757d108 ("net/mlx5e: Fix kbuild warnings for uninitialized parameters") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Basil Gunn authored
The ax.25 socket connection timed out & the sock struct has been previously taken down ie. sock struct is now a NULL pointer. Checking the sock_flag causes the segfault. Check if the socket struct pointer is NULL before checking sock_flag. This segfault is seen in timed out netrom connections. Please submit to -stable. Signed-off-by: Basil Gunn <basil@pacabunga.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Commit 7bd509e3 ("bpf: add prog_digest and expose it via fdinfo/netlink") was recently discussed, partially due to admittedly suboptimal name of "prog_digest" in combination with sha1 hash usage, thus inevitably and rightfully concerns about its security in terms of collision resistance were raised with regards to use-cases. The intended use cases are for debugging resp. introspection only for providing a stable "tag" over the instruction sequence that both kernel and user space can calculate independently. It's not usable at all for making a security relevant decision. So collisions where two different instruction sequences generate the same tag can happen, but ideally at a rather low rate. The "tag" will be dumped in hex and is short enough to introspect in tracepoints or kallsyms output along with other data such as stack trace, etc. Thus, this patch performs a rename into prog_tag and truncates the tag to a short output (64 bits) to make it obvious it's not collision-free. Should in future a hash or facility be needed with a security relevant focus, then we can think about requirements, constraints, etc that would fit to that situation. For now, rework the exposed parts for the current use cases as long as nothing has been released yet. Tested on x86_64 and s390x. Fixes: 7bd509e3 ("bpf: add prog_digest and expose it via fdinfo/netlink") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Masami Hiramatsu authored
Fix to probe on gcc generated functions on modules. Since probing on a module is based on its symbol name, it should be adjusted on actual symbols. E.g. without this fix, perf probe shows probe definition on non-exist symbol as below. $ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -F in_range* in_range.isra.12 $ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -D in_range p:probe/in_range nf_nat:in_range+0 With this fix, perf probe correctly shows a probe on gcc-generated symbol. $ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -D in_range p:probe/in_range nf_nat:in_range.isra.12+0 This also fixes same problem on online module as below. $ perf probe -m i915 -D assert_plane p:probe/assert_plane i915:assert_plane.constprop.134+0 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/148411450673.9978.14905987549651656075.stgit@devboxSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Masami Hiramatsu authored
Add error check codes on post processing and improve it for offline probe events as: - post processing fails if no matched symbol found in map(-ENOENT) or strdup() failed(-ENOMEM). - Even if the symbol name is the same, it updates symbol address and offset. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/148411443738.9978.4617979132625405545.stgit@devboxSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Parthasarathy Bhuvaragan authored
Until now, we allocate memory always with GFP_ATOMIC flag. When the system is under memory pressure and a user tries to send, the send fails due to low memory. However, the user application can wait for free memory if we allocate it using GFP_KERNEL flag. In this commit, we use allocate memory with GFP_KERNEL for all user allocation. Reported-by: Rune Torgersen <runet@innovsys.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Karicheri, Muralidharan authored
Currently dp83867 driver returns error if phy interface type PHY_INTERFACE_MODE_RGMII_RXID is used to set the rx only internal delay. Similarly issue happens for PHY_INTERFACE_MODE_RGMII_TXID. Fix this by checking also the interface type if a particular delay value is missing in the phy dt bindings. Also update the DT document accordingly. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Sitnicki authored
With ip6gre we have a tunnel header which also makes the tunnel MTU smaller. We need to reserve room for it. Previously we were using up space reserved for the Tunnel Encapsulation Limit option header (RFC 2473). Also, after commit b05229f4 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") our contract with the caller has changed. Now we check if the packet length exceeds the tunnel MTU after the tunnel header has been pushed, unlike before. This is reflected in the check where we look at the packet length minus the size of the tunnel header, which is already accounted for in tunnel MTU. Fixes: b05229f4 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") Signed-off-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Masami Hiramatsu authored
Fix to show correct locations for events on modules by relocating given address instead of retrying after failure. This happens when the module text size is big enough, bigger than sh_addr, because the original code retries with given address + sh_addr if it failed to find CU DIE at the given address. Any address smaller than sh_addr always fails and it retries with the correct address, but addresses bigger than sh_addr will get a CU DIE which is on the given address (not adjusted by sh_addr). In my environment(x86-64), the sh_addr of ".text" section is 0x10030. Since i915 is a huge kernel module, we can see this issue as below. $ grep "[Tt] .*\[i915\]" /proc/kallsyms | sort | head -n1 ffffffffc0270000 t i915_switcheroo_can_switch [i915] ffffffffc0270000 + 0x10030 = ffffffffc0280030, so we'll check symbols cross this boundary. $ grep "[Tt] .*\[i915\]" /proc/kallsyms | grep -B1 ^ffffffffc028\ | head -n 2 ffffffffc027ff80 t haswell_init_clock_gating [i915] ffffffffc0280110 t valleyview_init_clock_gating [i915] So setup probes on both function and see what happen. $ sudo ./perf probe -m i915 -a haswell_init_clock_gating \ -a valleyview_init_clock_gating Added new events: probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915) You can now use it in all perf tools, such as: perf record -e probe:valleyview_init_clock_gating -aR sleep 1 $ sudo ./perf probe -l probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) probe:valleyview_init_clock_gating (on i915_vga_set_decode:4@gpu/drm/i915/i915_drv.c in i915) As you can see, haswell_init_clock_gating is correctly shown, but valleyview_init_clock_gating is not. With this patch, both events are shown correctly. $ sudo ./perf probe -l probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) Committer notes: In my case: # perf probe -m i915 -a haswell_init_clock_gating -a valleyview_init_clock_gating Added new events: probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915) You can now use it in all perf tools, such as: perf record -e probe:valleyview_init_clock_gating -aR sleep 1 # perf probe -l probe:haswell_init_clock_gating (on i915_getparam+432@gpu/drm/i915/i915_drv.c in i915) probe:valleyview_init_clock_gating (on __i915_printk+240@gpu/drm/i915/i915_drv.c in i915) # # readelf -SW /lib/modules/4.9.0+/build/vmlinux | egrep -w '.text|Name' [Nr] Name Type Address Off Size ES Flg Lk Inf Al [ 1] .text PROGBITS ffffffff81000000 200000 822fd3 00 AX 0 0 4096 # So both are b0rked, now with the fix: # perf probe -m i915 -a haswell_init_clock_gating -a valleyview_init_clock_gating Added new events: probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915) You can now use it in all perf tools, such as: perf record -e probe:valleyview_init_clock_gating -aR sleep 1 # perf probe -l probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) # Both looks correct. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/148411436777.9978.1440275861947194930.stgit@devboxSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Hangbin Liu authored
This is an IPv6 version of commit 24803f38 ("igmp: do not remove igmp souce list..."). In mld_del_delrec(), we will restore back all source filter info instead of flush them. Move mld_clear_delrec() from ipv6_mc_down() to ipv6_mc_destroy_dev() since we should not remove source list info when set link down. Remove igmp6_group_dropped() in ipv6_mc_destroy_dev() since we have called it in ipv6_mc_down(). Also clear all source info after igmp6_group_dropped() instead of in it because ipv6_mc_down() will call igmp6_group_dropped(). Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd fixes from Bruce Fields: "Miscellaneous nfsd bugfixes, one for a 4.10 regression, three for older bugs" * tag 'nfsd-4.10-1' of git://linux-nfs.org/~bfields/linux: svcrdma: avoid duplicate dma unmapping during error recovery sunrpc: don't call sleeping functions from the notifier block callbacks svcrpc: don't leak contexts on PROC_DESTROY nfsd: fix supported attributes for acl & labels
-
Ivan Vecera authored
During interface opening MAC address stored in netdev->dev_addr is programmed in the HW with exception of BE3 VFs where the initial MAC is programmed by parent PF. This is OK when MAC address is not changed when an interfaces is down. In this case the requested MAC is stored to netdev->dev_addr and later is stored into HW during opening. But this is not done for all BE3 VFs so the NIC HW does not know anything about this change and all traffic is filtered. This is the case of bonding if fail_over_mac == 0 where the MACs of the slaves are changed while they are down. The be2net behavior is too restrictive because if a BE3 VF has the FILTMGMT privilege then it is able to modify its MAC without any restriction. To solve the described problem the driver should take care about these privileged BE3 VFs so the MAC is programmed during opening. And by contrast unpriviled BE3 VFs should not be allowed to change its MAC in any case. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ivan Vecera authored
BE3 VFs without FILTMGMT privilege are not allowed to modify its MAC, VLAN table and UC/MC lists. So don't try to delete MAC on such VFs. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ivan Vecera authored
Return value from be_mcc_notify_wait() contains a base completion status together with an additional status. The base_status() macro need to be used to access base status. Fixes: e3a7ae2c be2net: Changing MAC Address of a VF was broken Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
The #warning was present 10 years ago when the driver first got merged. As the platform is rather obsolete by now, it seems very unlikely that the warning will cause anyone to fix the code properly. kernelci.org reports the warning for every build in the meantime, so I think it's better to just turn it into a code comment to reduce noise. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Masaru Nagai authored
Due to alignment requirements of the hardware transmissions are split into two DMA descriptors, a small padding descriptor of 0 - 3 bytes in length followed by a descriptor for rest of the packet. In the case of IP packets the first descriptor will never be zero due to the way that the stack aligns buffers for IP packets. However, for non-IP packets it may be zero. In that case it has been reported that timeouts occur, presumably because transmission stops at the first zero-length DMA descriptor and thus the packet is not transmitted. However, in my environment a BUG is triggered as follows: [ 20.381417] ------------[ cut here ]------------ [ 20.386054] kernel BUG at lib/swiotlb.c:495! [ 20.390324] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 20.395805] Modules linked in: [ 20.398862] CPU: 0 PID: 2089 Comm: mz Not tainted 4.10.0-rc3-00001-gf13ad2db193f #162 [ 20.406689] Hardware name: Renesas Salvator-X board based on r8a7796 (DT) [ 20.413474] task: ffff80063b1f1900 task.stack: ffff80063a71c000 [ 20.419404] PC is at swiotlb_tbl_map_single+0x178/0x2ec [ 20.424625] LR is at map_single+0x4c/0x98 [ 20.428629] pc : [<ffff00000839c4c0>] lr : [<ffff00000839c680>] pstate: 800001c5 [ 20.436019] sp : ffff80063a71f9b0 [ 20.439327] x29: ffff80063a71f9b0 x28: ffff80063a20d500 [ 20.444636] x27: ffff000008ed5000 x26: 0000000000000000 [ 20.449944] x25: 000000067abe2adc x24: 0000000000000000 [ 20.455252] x23: 0000000000200000 x22: 0000000000000001 [ 20.460559] x21: 0000000000175ffe x20: ffff80063b2a0010 [ 20.465866] x19: 0000000000000000 x18: 0000ffffcae6fb20 [ 20.471173] x17: 0000ffffa09ba018 x16: ffff0000087c8b70 [ 20.476480] x15: 0000ffffa084f588 x14: 0000ffffa09cfa14 [ 20.481787] x13: 0000ffffcae87ff0 x12: 000000000063abe2 [ 20.487098] x11: ffff000008096360 x10: ffff80063abe2adc [ 20.492407] x9 : 0000000000000000 x8 : 0000000000000000 [ 20.497718] x7 : 0000000000000000 x6 : ffff000008ed50d0 [ 20.503028] x5 : 0000000000000000 x4 : 0000000000000001 [ 20.508338] x3 : 0000000000000000 x2 : 000000067abe2adc [ 20.513648] x1 : 00000000bafff000 x0 : 0000000000000000 [ 20.518958] [ 20.520446] Process mz (pid: 2089, stack limit = 0xffff80063a71c000) [ 20.526798] Stack: (0xffff80063a71f9b0 to 0xffff80063a720000) [ 20.532543] f9a0: ffff80063a71fa30 ffff00000839c680 [ 20.540374] f9c0: ffff80063b2a0010 ffff80063b2a0010 0000000000000001 0000000000000000 [ 20.548204] f9e0: 000000000000006e ffff80063b23c000 ffff80063b23c000 0000000000000000 [ 20.556034] fa00: ffff80063b23c000 ffff80063a20d500 000000013b1f1900 0000000000000000 [ 20.563864] fa20: ffff80063ffd18e0 ffff80063b2a0010 ffff80063a71fa60 ffff00000839cd10 [ 20.571694] fa40: ffff80063b2a0010 0000000000000000 ffff80063ffd18e0 000000067abe2adc [ 20.579524] fa60: ffff80063a71fa90 ffff000008096380 ffff80063b2a0010 0000000000000000 [ 20.587353] fa80: 0000000000000000 0000000000000001 ffff80063a71fac0 ffff00000864f770 [ 20.595184] faa0: ffff80063b23caf0 0000000000000000 0000000000000000 0000000000000140 [ 20.603014] fac0: ffff80063a71fb60 ffff0000087e6498 ffff80063a20d500 ffff80063b23c000 [ 20.610843] fae0: 0000000000000000 ffff000008daeaf0 0000000000000000 ffff000008daeb00 [ 20.618673] fb00: ffff80063a71fc0c ffff000008da7000 ffff80063b23c090 ffff80063a44f000 [ 20.626503] fb20: 0000000000000000 ffff000008daeb00 ffff80063a71fc0c ffff000008da7000 [ 20.634333] fb40: ffff80063b23c090 0000000000000000 ffff800600000037 ffff0000087e63d8 [ 20.642163] fb60: ffff80063a71fbc0 ffff000008807510 ffff80063a692400 ffff80063a20d500 [ 20.649993] fb80: ffff80063a44f000 ffff80063b23c000 ffff80063a69249c 0000000000000000 [ 20.657823] fba0: 0000000000000000 ffff80063a087800 ffff80063b23c000 ffff80063a20d500 [ 20.665653] fbc0: ffff80063a71fc10 ffff0000087e67dc ffff80063a20d500 ffff80063a692400 [ 20.673483] fbe0: ffff80063b23c000 0000000000000000 ffff80063a44f000 ffff80063a69249c [ 20.681312] fc00: ffff80063a5f1a10 000000103a087800 ffff80063a71fc70 ffff0000087e6b24 [ 20.689142] fc20: ffff80063a5f1a80 ffff80063a71fde8 000000000000000f 00000000000005ea [ 20.696972] fc40: ffff80063a5f1a10 0000000000000000 000000000000000f ffff00000887fbd0 [ 20.704802] fc60: fffffff43a5f1a80 0000000000000000 ffff80063a71fc80 ffff000008880240 [ 20.712632] fc80: ffff80063a71fd90 ffff0000087c7a34 ffff80063afc7180 0000000000000000 [ 20.720462] fca0: 0000ffffcae6fe18 0000000000000014 0000000060000000 0000000000000015 [ 20.728292] fcc0: 0000000000000123 00000000000000ce ffff0000088d2000 ffff80063b1f1900 [ 20.736122] fce0: 0000000000008933 ffff000008e7cb80 ffff80063a71fd80 ffff0000087c50a4 [ 20.743951] fd00: 0000000000008933 ffff000008e7cb80 ffff000008e7cb80 000000100000000e [ 20.751781] fd20: ffff80063a71fe4c 0000ffff00000300 0000000000000123 0000000000000000 [ 20.759611] fd40: 0000000000000000 ffff80063b1f0000 000000000000000e 0000000000000300 [ 20.767441] fd60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 20.775271] fd80: 0000000000000000 0000000000000000 ffff80063a71fda0 ffff0000087c8c20 [ 20.783100] fda0: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000 [ 20.790930] fdc0: ffffffffffffffff 0000ffffa0903078 0000000000000000 000000001ea87232 [ 20.798760] fde0: 000000000000000f ffff80063a71fe40 ffff800600000014 ffff000000000001 [ 20.806590] fe00: 0000000000000000 0000000000000000 ffff80063a71fde8 0000000000000000 [ 20.814420] fe20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001 [ 20.822249] fe40: 0000000203000011 0000000000000000 0000000000000000 ffff80063a68aa00 [ 20.830079] fe60: ffff80063a68aa00 0000000000000003 0000000000008933 ffff0000081f1b9c [ 20.837909] fe80: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000 [ 20.845739] fea0: ffffffffffffffff 0000ffffa07ca81c 0000000060000000 0000000000000015 [ 20.853569] fec0: 0000000000000003 000000001ea87232 000000000000000f 0000000000000000 [ 20.861399] fee0: 0000ffffcae6fe18 0000000000000014 0000000000000300 0000000000000000 [ 20.869228] ff00: 00000000000000ce 0000000000000000 00000000ffffffff 0000000000000000 [ 20.877059] ff20: 0000000000000002 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588 [ 20.884888] ff40: 0000000000000000 0000ffffa09ba018 0000ffffcae6fb20 000000001ea87010 [ 20.892718] ff60: 0000ffffa09b9000 0000ffffcae6fe30 0000ffffcae6fe18 000000000000000f [ 20.900548] ff80: 0000000000000003 000000001ea87232 0000000000000000 0000000000000000 [ 20.908378] ffa0: 0000000000000000 0000ffffcae6fdc0 0000ffffa09a7824 0000ffffcae6fdc0 [ 20.916208] ffc0: 0000ffffa0903078 0000000060000000 0000000000000003 00000000000000ce [ 20.924038] ffe0: 0000000000000000 0000000000000000 ffffffffffffffff ffffffffffffffff [ 20.931867] Call trace: [ 20.934312] Exception stack(0xffff80063a71f7e0 to 0xffff80063a71f910) [ 20.940750] f7e0: 0000000000000000 0001000000000000 ffff80063a71f9b0 ffff00000839c4c0 [ 20.948580] f800: ffff80063a71f840 ffff00000888a6e4 ffff80063a24c418 ffff80063a24c448 [ 20.956410] f820: 0000000000000000 ffff00000811cd54 ffff80063a71f860 ffff80063a24c458 [ 20.964240] f840: ffff80063a71f870 ffff00000888b258 ffff80063a24c418 0000000000000001 [ 20.972070] f860: ffff80063a71f910 ffff80063a7b7028 ffff80063a71f890 ffff0000088825e4 [ 20.979899] f880: 0000000000000000 00000000bafff000 000000067abe2adc 0000000000000000 [ 20.987729] f8a0: 0000000000000001 0000000000000000 ffff000008ed50d0 0000000000000000 [ 20.995560] f8c0: 0000000000000000 0000000000000000 ffff80063abe2adc ffff000008096360 [ 21.003390] f8e0: 000000000063abe2 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588 [ 21.011219] f900: ffff0000087c8b70 0000ffffa09ba018 [ 21.016097] [<ffff00000839c4c0>] swiotlb_tbl_map_single+0x178/0x2ec [ 21.022362] [<ffff00000839c680>] map_single+0x4c/0x98 [ 21.027411] [<ffff00000839cd10>] swiotlb_map_page+0xa4/0x138 [ 21.033072] [<ffff000008096380>] __swiotlb_map_page+0x20/0x7c [ 21.038821] [<ffff00000864f770>] ravb_start_xmit+0x174/0x668 [ 21.044484] [<ffff0000087e6498>] dev_hard_start_xmit+0x8c/0x120 [ 21.050407] [<ffff000008807510>] sch_direct_xmit+0x108/0x1a0 [ 21.056064] [<ffff0000087e67dc>] __dev_queue_xmit+0x194/0x4cc [ 21.061807] [<ffff0000087e6b24>] dev_queue_xmit+0x10/0x18 [ 21.067214] [<ffff000008880240>] packet_sendmsg+0xf40/0x1220 [ 21.072873] [<ffff0000087c7a34>] sock_sendmsg+0x18/0x2c [ 21.078097] [<ffff0000087c8c20>] SyS_sendto+0xb0/0xf0 [ 21.083150] [<ffff000008082f30>] el0_svc_naked+0x24/0x28 [ 21.088462] Code: d34bfef7 2a1803f3 1a9f86d6 35fff878 (d4210000) [ 21.094611] ---[ end trace 5bc544ad491f3814 ]--- [ 21.099234] Kernel panic - not syncing: Fatal exception in interrupt [ 21.105587] Kernel Offset: disabled [ 21.109073] Memory Limit: none [ 21.112126] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Fixes: 2f45d190 ("ravb: minimize TX data copying") Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Disable BH around the call to napi_schedule() to avoid following warning [ 52.095499] NOHZ: local_softirq_pending 08 [ 52.421291] NOHZ: local_softirq_pending 08 [ 52.608313] NOHZ: local_softirq_pending 08 Fixes: 8d59de8f ("net/mlx4_en: Process all completions in RX rings after port goes up") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Erez Shitrit <erezsh@mellanox.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Cc: Tariq Toukan <tariqt@mellanox.com> Acked-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
Johan Hedberg says: ==================== pull request: bluetooth 2017-01-16 Here are a couple of important 802.15.4 driver fixes for the 4.10 kernel. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ulf Hansson authored
Regressions for not being able to detect an eMMC HS DDR mode card has been reported for the sdhci-esdhc-imx driver, but potentially other sdhci variants may suffer from the similar problem. The commit e173f891 ("mmc: core: Update CMD13 polling policy when switch to HS DDR mode"), is causing the problem. It seems that change moved one step to far, regarding changing the host's timing before polling for a busy card. To fix this, let's move back to the behaviour when the host's timing is updated after the polling, but before the switch status is fetched and validated. In cases when polling with CMD13, we keep validating the switch status at each attempt. However, to align with the other card busy detections mechanism, let's fetch and validate the switch status also after the host's timing is updated. Reported-by: Clemens Gruber <clemens.gruber@pqgruber.com> Reported-by: Gary Bisson <gary.bisson@boundarydevices.com> Fixes: e173f891 ("mmc: core: Update CMD13 polling policy when switch..") Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Dong Aisheng <aisheng.dong@nxp.com> Cc: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Clemens Gruber <clemens.gruber@pqgruber.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
-
Ingo Molnar authored
Merge branch 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into rcu/urgent Pull an urgent RCU fix from Paul E. McKenney: "This series contains a pair of commits that permit RCU synchronous grace periods (synchronize_rcu() and friends) to work correctly throughout boot. This eliminates the current "dead time" starting when the scheduler spawns its first taks and ending when the last of RCU's kthreads is spawned (this last happens during early_initcall() time). Although RCU's synchronous grace periods have long been documented as not working during this time, prior to 4.9, the expedited grace periods worked by accident, and some ACPI code came to rely on this unintentional behavior. (Note that this unintentional behavior was -not- reliable. For example, failures from ACPI could occur on !SMP systems and on systems booting with the rcu_normal kernel boot parameter.) Either way, there is a bug that needs fixing, and the 4.9 switch of RCU's expedited grace periods to workqueues could be considered to have caused a regression. This series therefore makes RCU's expedited grace periods operate correctly throughout the boot process. This has been demonstrated to fix the problems ACPI was encountering, and has the added longer-term benefit of simplifying RCU's behavior." Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2017-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== We have a number of fixes, in part because I was late in actually sending them out - will try to do better in the future: * handle VHT opmode properly when hostapd is controlling full station state * two fixes for minimum channel width in mac80211 * don't leave SMPS set to junk in HT capabilities * fix headroom when forwarding mesh packets, recently broken by another fix that failed to take into account frame encryption * fix the TID in null-data packets indicating EOSP (end of service period) in U-APSD * prevent attempting to use (and then failing which results in crashes) TXQs on stations that aren't added to the driver yet ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-