- 31 Jan, 2020 11 commits
-
-
Ville Syrjälä authored
I want to have a higher level cdclk state object so let's rename the current lower level thing to cdclk_config (because I lack imagination). Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200120174728.21095-8-ville.syrjala@linux.intel.comReviewed-by:
José Roberto de Souza <jose.souza@intel.com>
-
Ville Syrjälä authored
intel_cdclk_needs_cd2x_update() is named rather confusingly. We don't have to do a cd2x update, rather we are allowed to do one (as opposed to a full PLL reprogramming with its heavy handed modeset). So let's rename the function to intel_cdclk_can_cd2x_update(). Signed-off-by:
Imre Deak <imre.deak@intel.com>
-
Ville Syrjälä authored
Move the min_cdclk[] and min_voltage_level[] arrays under the rest of the cdclk state. And while at it provide a simple helper (intel_cdclk_clear_state()) to clear the state during the ww_mutex backoff dance. Signed-off-by:
-
Ville Syrjälä authored
Move the initial setup of state->{cdclk,min_cdclk[],min_voltage_level[]} into intel_modeset_calc_cdclk(), and we'll move the counterparts into intel_cdclk_swap_state(). This encapsulates the cdclk state much better. Signed-off-by: -
Ville Syrjälä authored
The dirty_pipes bitmask is now unused. Get rid of it. Reviewed-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
-
Ville Syrjälä authored
The linetime watermarks really have very little in common with the plane watermarks. It looks to be cleaner to simply track them in the crtc_state and program them from the normal modeset/fastset paths. The only dark cloud comes from the fact that the register is still supposedly single buffered. So in theory it might still need some form of two stage programming. Note that even though HSW/BDWhave two stage programming we never computed any special intermediate values for the linetime watermarks, and on SKL+ we don't even have the two stage stuff plugged in since everything else is double buffered. So let's assume it's all fine and continue doing what we've been doing. Actually on HSW/BDW the value should not even change without a full modeset since it doesn't account for pfit downscaling. Thus only fastboot might be affected. But on SKL+ the pfit scaling factor is take into consideration so the value may change during any fastset. As a bonus we'll plug this thing into the state checker/dump now. v2: Rebase due to bigjoiner prep v2: Only compute ips linetime for IPS capable pipes. Bspec says the register values is ignored for other pipes, but in fact it can't even be written so the state checker becomes unhappy if we don't compute it as zero. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: -
Ville Syrjälä authored
Let's store the normal and IPS linetime watermarks individually, and while at it we'll pimp the register definitions as well. v2: Deal with gvt Reviewed-by:
-
Jani Nikula authored
intel_dp_set_m_n() has a clear place in the DDI DP specific pre-enable hook. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by:
Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200128162850.8660-3-jani.nikula@intel.com
-
Vandita Kulkarni authored
Enable the dsi transcoder, panel and backlight as part of encoder->enable and not encoder->pre_enable. We need to have pipe src size, among other things, set before enabling the transcoder, to avoid FIFO underruns and possibly other issues. v2 by Jani: - Rebase on the crtc enable sequence update Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
To allow better flexibility for encoder specific code, push intel_enable_pipe(), lpt_pch_enable() and intel_crtc_vblank_on() down to the encoders from hsw_crtc_enable(). There's slight duplication, but also more clarity with the reduced conditional statements. Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
The debugfs is not the place to print duplicated info about VBT data. Reviewed-by:
-
- 30 Jan, 2020 13 commits
-
-
Chris Wilson authored
On Braswell and Broxton (also known as Valleyview and Apollolake), we need to serialise updates of the GGTT using the big stop_machine() hammer. This has the side effect of appearing to lockdep as a possible reclaim (since it uses the cpuhp mutex and that is tainted by per-cpu allocations). However, we want to use vm->mutex (including ggtt->mutex) from within the shrinker and so must avoid such possible taints. For this purpose, we introduced the asynchronous vma binding and we can apply it to the PIN_GLOBAL so long as take care to add the necessary waits for the worker afterwards. Closes: https://gitlab.freedesktop.org/drm/intel/issues/211Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200130181710.2030251-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
The i915_ggtt now sits beneath gt/ outside of the auspices of gem/ and should be given a fresh name to reflect that. We also want to give it a name that reflects its role in the system suspend/resume, with the intention of pulling together all the GGTT operations (e.g. restoring the fence registers once they are pulled under gt/intel_ggtt_detiler.c) Signed-off-by:
-
Chris Wilson authored
Make sure we hold the rcu lock as we acquire the rcu protected reference of the object when looking it up from the associated mmap vma. Closes: https://gitlab.freedesktop.org/drm/intel/issues/1083 Fixes: cc662126 ("drm/i915: Introduce DRM_I915_GEM_MMAP_OFFSET") Signed-off-by:
-
Chris Wilson authored
Avoid releasing the same stolen nodes causing a use-after-free and/or explosions as the self-checks fail, as __intel_fbc_cleanup_cfb() may be called multiple times during module unload. Signed-off-by:
-
Chris Wilson authored
VT'd on Broxton and on Braswell require serialisation of GGTT updates. However, it seems to only be required for insertion, so drop the complication and heavyweight stop_machine() for clears. The range will be serialised again before use. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200130092239.1743672-1-chris@chris-wilson.co.uk
-
Wambui Karuga authored
Manually convert the remaining instance of the printk based drm logging macros to the struct drm_device based logging macros in i915/gt/intel_ring_submission.c Signed-off-by:
Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by:
-
Wambui Karuga authored
Convert remaining instances of the printk based logging macros in i915/gt/intel_gt to the struct drm_device based logging macros. Signed-off-by:
-
Wambui Karuga authored
Conversion of the remaining printk based drm logging macros to the new struct drm_device based logging macros in i915/gt/intel_engine_cs.c. Signed-off-by:
-
Wambui Karuga authored
This converts most instances of the printk based drm logging macros in i915/gt/intel_resect.c to the new struct drm_based logging macros. Signed-off-by:
-
Wambui Karuga authored
Manual conversion of the printk based logging macros to the new struct drm_based logging macros in drm/i915/gt/intel_ggtt.c. Also includes extracting the struct drm_i915_private device from various intel types to use in the new macros. Signed-off-by:
-
José Roberto de Souza authored
Only the first and the last nodes were being added to ref->preallocated_barriers. Renaming variables to make it more easy to read. Fixes: 84135022 ("drm/i915/gt: Drop mutex serialisation between context pin/unpin") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Lionel Landwerlin authored
Could be helpful for debugging purposes. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
-
Chris Wilson authored
When we reset the engine, we first remove the guilty request from the active list. If it so happens that there is a pending preemption event to process before we handle the reset, when we inspect that event we find ourselves a little confused as we have bent the rules slightly to perform the reset. Just ignore any discrepancies inside reset, we know we'll start again from scratch afterwards. <0>[ 536.940213] <idle>-0 6..s1 537441383us : execlists_reset: 0000:00:02.0 vcs0: reset for CS error <0>[ 536.940213] i915_sel-7302 2d..1 537441386us : trace_ports: 0000:00:02.0 vcs0: submit { 10c59:2*, 10c5a:2 } <0>[ 536.940213] <idle>-0 6d.s2 537471320us : __i915_request_unsubmit: 0000:00:02.0 vcs0: fence 10c59:2, current 1 <0>[ 536.940213] <idle>-0 6d.s2 537471321us : execlists_hold: 0000:00:02.0 vcs0: fence 10c59:2, current 1 on hold <0>[ 536.940213] <idle>-0 6.Ns1 537471328us : intel_engine_reset: 0000:00:02.0 vcs0: flags=10 <0>[ 536.940213] <idle>-0 6.Ns1 537471421us : execlists_reset_prepare: 0000:00:02.0 vcs0: depth<-1 <0>[ 536.940213] <idle>-0 6.Ns1 537471422us : intel_engine_stop_cs: 0000:00:02.0 vcs0: <0>[ 536.940213] <idle>-0 6.Ns1 537472424us : intel_engine_stop_cs: 0000:00:02.0 vcs0: timed out on STOP_RING -> IDLE <0>[ 536.940213] <idle>-0 6.Ns1 537472429us : __intel_gt_reset: 0000:00:02.0 engine_mask=4 <0>[ 536.940213] <idle>-0 6.Ns1 537472442us : execlists_reset_rewind: 0000:00:02.0 vcs0: <0>[ 536.940213] <idle>-0 6dNs2 537472443us : process_csb: 0000:00:02.0 vcs0: cs-irq head=4, tail=5 <0>[ 536.940213] <idle>-0 6dNs2 537472444us : process_csb: 0000:00:02.0 vcs0: csb[5]: status=0x00008002:0x20000060 <0>[ 536.940213] <idle>-0 6dNs2 537472464us : trace_ports: 0000:00:02.0 vcs0: preempted { 10c59:2*, 0:0 } <0>[ 536.940213] <idle>-0 6dNs2 537472465us : trace_ports: 0000:00:02.0 vcs0: promote { 10c59:2*, 10c5a:2 } <0>[ 536.940213] <idle>-0 6dNs2 537472706us : assert_pending_valid: assert_pending_valid:1417 GEM_BUG_ON(!i915_request_is_active(rq)) Signed-off-by:
-
- 29 Jan, 2020 12 commits
-
-
Chris Wilson authored
Now that we have offline error capture and can reset an engine from inside an atomic context while also preserving the GPU state for post-mortem analysis, it is time to handle error interrupts thrown by the command parser. This provides a much, much faster mechanism for us to detect known problems than using heartbeats/hangchecks, and also provides a mechanism for when those are disabled. However, it is limited to problems the HW can detect in the CS and so not a complete solution for detecting lockups. Signed-off-by:
-
Chris Wilson authored
We write to execlists->pending[0] in process_csb() to acknowledge the completion of the ESLP update, outside of the main spinlock. When we check the current status of the previous submission in __execlists_submission_tasklet() we should therefore use READ_ONCE() to reflect and document the unsynchronized read. Signed-off-by:
-
Matthew Auld authored
Measure the memcpy bw between our CPU accessible regions, trying all supported mapping combinations(WC, WB) across various sizes. v2: use smaller sizes throw in memcpy32/memcpy64/memcpy_from_wc Signed-off-by: -
Jani Nikula authored
We've long had the more generic /dev/drm_dp_auxN devices for the same purpose. Drop the redundant and limited DPCD debugfs file. Reviewed-by:
-
Jani Nikula authored
The implicit "dev_priv" local variable use has been a long-standing pain point in the register access macros I915_READ(), I915_WRITE(), POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW(). Replace them with the corresponding new display engine register accessors intel_de_read(), intel_de_write(), intel_de_posting_read(), intel_de_read_fw(), and intel_de_write_fw(). No functional changes. Generated using the following semantic patch: @@ expression REG, OFFSET; @@ - I915_READ(REG) + intel_de_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - POSTING_READ(REG) + intel_de_posting_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE(REG, OFFSET) + intel_de_write(dev_priv, REG, OFFSET) @@ expression REG; @@ - I915_READ_FW(REG) + intel_de_read_fw(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE_FW(REG, OFFSET) + intel_de_write_fw(dev_priv, REG, OFFSET) Acked-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
The implicit "dev_priv" local variable use has been a long-standing pain point in the register access macros I915_READ(), I915_WRITE(), POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW(). Replace them with the corresponding new display engine register accessors intel_de_read(), intel_de_write(), intel_de_posting_read(), intel_de_read_fw(), and intel_de_write_fw(). No functional changes. Generated using the following semantic patch: @@ expression REG, OFFSET; @@ - I915_READ(REG) + intel_de_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - POSTING_READ(REG) + intel_de_posting_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE(REG, OFFSET) + intel_de_write(dev_priv, REG, OFFSET) @@ expression REG; @@ - I915_READ_FW(REG) + intel_de_read_fw(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE_FW(REG, OFFSET) + intel_de_write_fw(dev_priv, REG, OFFSET) Acked-by:
-
Jani Nikula authored
The implicit "dev_priv" local variable use has been a long-standing pain point in the register access macros I915_READ(), I915_WRITE(), POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW(). Replace them with the corresponding new display engine register accessors intel_de_read(), intel_de_write(), intel_de_posting_read(), intel_de_read_fw(), and intel_de_write_fw(). No functional changes. Generated using the following semantic patch: @@ expression REG, OFFSET; @@ - I915_READ(REG) + intel_de_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - POSTING_READ(REG) + intel_de_posting_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE(REG, OFFSET) + intel_de_write(dev_priv, REG, OFFSET) @@ expression REG; @@ - I915_READ_FW(REG) + intel_de_read_fw(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE_FW(REG, OFFSET) + intel_de_write_fw(dev_priv, REG, OFFSET) Acked-by:
-
Jani Nikula authored
The implicit "dev_priv" local variable use has been a long-standing pain point in the register access macros I915_READ(), I915_WRITE(), POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW(). Replace them with the corresponding new display engine register accessors intel_de_read(), intel_de_write(), intel_de_posting_read(), intel_de_read_fw(), and intel_de_write_fw(). No functional changes. Generated using the following semantic patch: @@ expression REG, OFFSET; @@ - I915_READ(REG) + intel_de_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - POSTING_READ(REG) + intel_de_posting_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE(REG, OFFSET) + intel_de_write(dev_priv, REG, OFFSET) @@ expression REG; @@ - I915_READ_FW(REG) + intel_de_read_fw(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE_FW(REG, OFFSET) + intel_de_write_fw(dev_priv, REG, OFFSET) Acked-by:
-
Jani Nikula authored
The implicit "dev_priv" local variable use has been a long-standing pain point in the register access macros I915_READ(), I915_WRITE(), POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW(). Replace them with the corresponding new display engine register accessors intel_de_read(), intel_de_write(), intel_de_posting_read(), intel_de_read_fw(), and intel_de_write_fw(). No functional changes. Generated using the following semantic patch: @@ expression REG, OFFSET; @@ - I915_READ(REG) + intel_de_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - POSTING_READ(REG) + intel_de_posting_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE(REG, OFFSET) + intel_de_write(dev_priv, REG, OFFSET) @@ expression REG; @@ - I915_READ_FW(REG) + intel_de_read_fw(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE_FW(REG, OFFSET) + intel_de_write_fw(dev_priv, REG, OFFSET) Acked-by:
-
Jani Nikula authored
The implicit "dev_priv" local variable use has been a long-standing pain point in the register access macros I915_READ(), I915_WRITE(), POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW(). Replace them with the corresponding new display engine register accessors intel_de_read(), intel_de_write(), intel_de_posting_read(), intel_de_read_fw(), and intel_de_write_fw(). No functional changes. Generated using the following semantic patch: @@ expression REG, OFFSET; @@ - I915_READ(REG) + intel_de_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - POSTING_READ(REG) + intel_de_posting_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE(REG, OFFSET) + intel_de_write(dev_priv, REG, OFFSET) @@ expression REG; @@ - I915_READ_FW(REG) + intel_de_read_fw(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE_FW(REG, OFFSET) + intel_de_write_fw(dev_priv, REG, OFFSET) Acked-by:
-
Jani Nikula authored
The implicit "dev_priv" local variable use has been a long-standing pain point in the register access macros I915_READ(), I915_WRITE(), POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW(). Replace them with the corresponding new display engine register accessors intel_de_read(), intel_de_write(), intel_de_posting_read(), intel_de_read_fw(), and intel_de_write_fw(). No functional changes. Generated using the following semantic patch: @@ expression REG, OFFSET; @@ - I915_READ(REG) + intel_de_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - POSTING_READ(REG) + intel_de_posting_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE(REG, OFFSET) + intel_de_write(dev_priv, REG, OFFSET) @@ expression REG; @@ - I915_READ_FW(REG) + intel_de_read_fw(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE_FW(REG, OFFSET) + intel_de_write_fw(dev_priv, REG, OFFSET) Acked-by:
-
Jani Nikula authored
The implicit "dev_priv" local variable use has been a long-standing pain point in the register access macros I915_READ(), I915_WRITE(), POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW(). Replace them with the corresponding new display engine register accessors intel_de_read(), intel_de_write(), intel_de_posting_read(), intel_de_read_fw(), and intel_de_write_fw(). No functional changes. Generated using the following semantic patch: @@ expression REG, OFFSET; @@ - I915_READ(REG) + intel_de_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - POSTING_READ(REG) + intel_de_posting_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE(REG, OFFSET) + intel_de_write(dev_priv, REG, OFFSET) @@ expression REG; @@ - I915_READ_FW(REG) + intel_de_read_fw(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE_FW(REG, OFFSET) + intel_de_write_fw(dev_priv, REG, OFFSET) Acked-by:
-
- 28 Jan, 2020 4 commits
-
-
Chris Wilson authored
Hold onto the vm->mutex (to lock the drm_mm) to ensure that the rbtree is stable as we search it for our scratch node. Signed-off-by:
-
Chris Wilson authored
Don't confuse the poor developer by writing a negative value as a very large positive, as the flow of requests is already complex enough. Reported-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
Chris Wilson authored
The user (e.g. gem_eio) can manipulate the driver into wedging itself, allowing the user to trigger voluminous logging of inconsequential details. If we lift the dump to direct calls to intel_gt_set_wedged(), out of the intel_reset failure handling, we keep the detail logging for what we expect are true HW or test failures without being tricked. Reported-by:
Tomi Sarvela <tomi.p.sarvela@intel.com> Signed-off-by:
-
Chris Wilson authored
We use the same interrupt mask for each engine, so define it once in a local and reuse. Signed-off-by:
-
