- 22 Jan, 2013 6 commits
-
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Since we have removed NCE (Neighbour Cache Entry) reference from routing entries, the only refcnt holders of an NCE are its timer (if running) and its owner table, in usual cases. As a result, neigh_periodic_work() purges NCEs over and over again even for gateways. It does not make sense to purge entries, if number of them is very small, so keep them. The minimum number of entries to keep is specified by gc_thresh1. Signed-off-by:
-
Nicolas Dichtel authored
mfc_mcastgrp and mfc_origin are __be32, thus we need to convert INADDR_ANY. Because INADDR_ANY is 0, this patch just fix sparse warnings. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
- 21 Jan, 2013 34 commits
-
-
Tilman Schmidt authored
Cosmetic changes to drivers/isdn/gigaset/ev-layer.c and drivers/isdn/gigaset/gigaset.h to improve readability. Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Signed-off-by:
-
Tilman Schmidt authored
Rearrange the gigaset_freecs() function to make it more readable, and adapt gigaset_initcs() accordingly. Signed-off-by:
-
Tilman Schmidt authored
Avoid forward declarations and remove a needless initialization. Signed-off-by:
-
Tilman Schmidt authored
Some firmware releases of Gigaset M105 do not accept AT+VLS=0 command in DLE mode, so always leave DLE mode before sending the command. Signed-off-by:
-
Tilman Schmidt authored
Fix up some of the readibility deterioration caused by last year's ISDN whitespace coding style cleanup. Note that the checkpatch complaints all apply to the state of the source before this patch as well, and in many cases even more so. Signed-off-by:
-
Julia Lawall authored
Delete successive tests to the same location. rc was previously tested and not subsequently updated. efx_phc_adjtime can return an error code, so the call is updated so that is tested instead. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @s exists@ local idexpression y; expression x,e; @@ *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } ... when != \(y = e\|y += e\|y -= e\|y |= e\|y &= e\|y++\|y--\|&y\) when != \(XT_GETPAGE(...,y)\|WMI_CMD_BUF(...)\) *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Acked-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Commit 2152caea ("ipv6: Do not depend on rt->n in rt6_probe().") introduce a bug to try to update "updated" time in neighbour structure. Update the "updated" time only if neighbour is available. Bug was found by Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== These two patches are non-critical bugfixes based on net-next which I stumbled upon while working on Device Tree bindings for DSA (will comme as a separate patch later). ==================== Signed-off-by: -
Florian Fainelli authored
This patch changes dsa_switch_setup() to ensure that at least one valid valid port name is specified and will bail out with an error in case we walked the maximum number of port with a valid port name found. Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
-
Florian Fainelli authored
The slave MII bus registered by the DSA code is using the parent MII bus as part of its name (ds->master_mii_bus_id), in case the parent MII bus name is already 16 characters long (such as d0072004.mdio-mi) we will get the following WARN_ON in dsa_switch_setup() when calling mdiobus_register(): [ 79.088782] ------------[ cut here ]------------ [ 79.093448] WARNING: at fs/sysfs/dir.c:536 sysfs_add_one+0x80/0xa0() [ 79.099831] sysfs: cannot create duplicate filename '/class/mdio_bus/d0072004.mdio-mi' This is a genuine warning, because the DSA slave MII bus will also be named d0072004.mdio-mi, and since MII_BUS_ID_SIZE is 17 characters long (with null-terminator) the following will truncate the slave MII bus id: snprintf(ds->slave_mii_bus->id, MII_BUS_ID_SIZE, "%s-%d:%.2x", ds->master_mii_bus->id, ds->pd->sw_addr); Fix this by using dsa-<switch index->:<sw_add> which is guaranteed to be unique. Signed-off-by: -
Cong Wang authored
__skb_tx_hash() and __skb_get_rxhash() are all for calculating hash value based by some fields in skb, mostly used for selecting queues by device drivers. Meanwhile, net/core/dev.c is bloating. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
David S. Miller authored
Amos Kong says: ==================== Currenly mac is programmed byte by byte. This means that we have an intermediate step where mac is wrong. Third patch introduced a new vq control command to set mac address, it's atomic. V2: check return of sending command, delay eth_mac_addr() V3: restore software address when fail to set hardware address V4: split eth_mac_addr, fix error handle V5: rebase patches to net-next tree ==================== Signed-off-by: -
Amos Kong authored
Currently we write MAC address to pci config space byte by byte, this means that we have an intermediate step where mac is wrong. This patch introduced a new control command to set MAC address, it's atomic. VIRTIO_NET_F_CTRL_MAC_ADDR is a new feature bit for compatibility. Signed-off-by:
Amos Kong <akong@redhat.com> Signed-off-by:
-
Stefan Hajnoczi authored
When we set mac address, software mac address in system and hardware mac address all need to be updated. Current eth_mac_addr() doesn't allow callers to implement error handling nicely. This patch split eth_mac_addr() to prepare part and real commit part, then we can prepare first, and try to change hardware address, then do the real commit if hardware address is set successfully. Signed-off-by:
Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by:
-
Amos Kong authored
We want to send vq command to set mac address in virtnet_set_mac_address(), so do this function moving. Fixed a little issue of coding style. Signed-off-by:
-
David S. Miller authored
Nicolas Dichtel says: ==================== The goal of this serie is to add the support of proxy multicast, ie being able to build a static multicast tree. In other words, it adds the support of (*,G) mf[6]c entries. v2: use INADDR_ANY instead of 0 for IPv4 addresses ==================== Signed-off-by: -
Nicolas Dichtel authored
This patch add the support of proxy multicast, ie being able to build a static multicast tree. It adds the support of (*,*) and (*,G) entries. The user should define an (*,*) entry which is not used for real forwarding. This entry defines the upstream in iif and contains all interfaces from the static tree in its oifs. It will be used to forward packet upstream when they come from an interface belonging to the static tree. Hence, the user should define (*,G) entries to build its static tree. Note that upstream interface must be part of oifs: packets are sent to all oifs interfaces except the input interface. This ensures to always join the whole static tree, even if the packet is not coming from the upstream interface. Signed-off-by:
David L Stevens <dlstevens@us.ibm.com> Signed-off-by:
-
Nicolas Dichtel authored
This will ease further addition of new MRT[6]_* values and avoid to update in6.h each time. Note that we reduce the maximum value from 210 to 209, but 210 does not match any known value in ip[6]_mroute_setsockopt(). Signed-off-by:
-
Paul Gortmaker authored
The original intent of this file was to list limitations in drivers/hardware relating to multicast use, back when some modest hardware from the early 1990s did not support things we might take for granted today. I was intending to delete some now-gone MCA/token ring entries in this file, but once I opened it, I found it only contained information on the earliest (pre-2000) linux networking drivers. Checking the git history shows that the file hasn't been touched since 2005. Clearly nobody is actively consulting this file as a meaningful reference. Rather than add a "YES YES YES" line for all of the drivers we currently have, lets just take advantage of the fact that nobody is using the file to delete it. This has the side benefit of not having to do a line-by-line deletion of the file content as each older driver is expired. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
David S. Miller authored
Merge s390 networking changes from Frank Blaschka. Signed-off-by: -
Stefan Raspl authored
Commit 46d3ceab "tcp: TCP Small Queues" has severly degraded performance for single connection RR workloads on HiperSockets with MTU >=16K due to a conflict of the TCP Small Queues approach with our buffer scan threshold which releases buffers not frequently enough yet. This fix restores performance to the same level as before cited commit. Signed-off-by:
Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
-
Stefan Raspl authored
As of now, s390dbf entries for the cards are discarded as soon as the device is removed. However, this will also bar us of all chances of getting valuable debug information after a device has been removed. This patch will keep the s390dbf entries around until the qeth module is removed. Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
-
Stefan Raspl authored
Refer to virtual NICs instead of GuestLANs. Signed-off-by:
-
Stefan Raspl authored
The existing port isolation mode 'forward' will now verify that the adjacent switch port supports the required reflective relay (RR) mode. This patch adds the required error handling for the cases where enabling port isolation mode 'forward' can now fail. Furthermore, once established, we never fall back from one of the port isolation modes to a non-isolated mode without further user-interaction. This includes cases where the isolation mode was enabled successfully, but ceases to work e.g. due to configuration changes at the switch port. Finally, configuring an isolation mode with the device being offline will make onlining the device fail permanently upon errors encountered until either errors are resolved or the isolation mode is changed by the user to a different mode. Signed-off-by:
-
Stefan Raspl authored
Remove exports that are not used anywhere else. Signed-off-by:
-
Stefan Raspl authored
The previous code did never retry any idx setup unless retries were done for device offline/online at the beginning of the function. Signed-off-by:
-
David S. Miller authored
YOSHIFUJI Hideaki says: ==================== This series of changes basically clean up NDISC logic, especially on sender side. We originally do For NS/NA/RS: 1) build temporary ICMPv6 header 2) ndisc_build_skb() with temporary ICMPv6 header and rather criptic arguments. - Calculate total length and allocate sk_buff - Build IPv6 header. - copy ICMPv6 header, additional data and ND options. - Fill-in ICMPv6 checksum. Here, structures defined for message format was not used at all, it is difficult to understand what is being sent, and it was not generic. 3) __ndisc_send() - Allocate temporary dst. - Send it. Several issues: - We could not defer decision if we should/can send some ND option. - It is hard to see the packet format at a glance. - ICMPv6 header was built as temporary variable, and then copied to the buffer. - Some code path for Redirect was not shared. With these patches, we do: 1) Calculate (or estimate) message length and option length. 2) Allocate skb (via new ndisc_skb_alloc()). 3) Fill-in ICMPv6 message directly using compound literals. 4) Fill-in ICMPv6 checksum 5) Build IPv6 header (including length) 6) Send the packet (via ndisc_send_skb()). - allocate temporary dst and send it. - We can defer calculating real length of the packet. For example, we can give up filling some option at when filling in. - Message is built directly without temporary buffer. - Structures defined for message format is easier to understand what is being built. - NS/NA/RS/Redirect share same logic. - Reduced code/data size: text data bss dec hex filename 265407 14133 3488 283028 45194 old/net/ipv6/ipv6.o 264955 14109 3488 282552 44fb8 new/net/ipv6/ipv6.o ==================== Signed-off-by: -
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Construct NS/NA/RS message directly using C99 compound literals. Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Reuse dst if one is attached with skb. Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
skb_transport_header() (thus icmp6_hdr()) is available here, use it. Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
