- 16 Nov, 2011 7 commits
-
-
Johan Hedberg authored
The command complete event was completely missing for this command. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Gustavo F. Padovan <padovan@profusion.mobi>
-
Johan Hedberg authored
The management protocol uses a single byte for error codes (aka command status). In some places this value is directly copied from HCI and in other a POSIX error number is used. This makes it impossible for user-space to uniquily decipher the meaning of an error. To solve this issue a new mgmt-specific set of error codes is added along with a conversion table for HCI status values. Signed-off-by:
-
Johan Hedberg authored
When the adapter state is already what is requested it's more friendly to user-space to simply report success than to send a EALREADY error message. Signed-off-by:
-
Johan Hedberg authored
When possible cmd_complete should be returned instead of cmd_status since it contains the remote address (this helps user-space track what exactly failed). Signed-off-by:
-
Johan Hedberg authored
The kernel needs to know whether it should connect to a device over BR/EDR or over LE. This is particularly important in the future when dual-mode device may be connectable also over LE. It is also important if/when we decide to move the LE advertisement cache from the kernel into user-space. Adding the type to the mgmt command also ensures conformance with the latest mgmt API spec. Signed-off-by:
-
Andre Guedes authored
This patches creates mgmt_stop_discovery_failed() which removes pending MGMT_OP_STOP_DISCOVERY commands and sends proper command status events. This patch also fixes the MGMT_OP_STOP_DISCOVERY command leak in case cancel inquiry fails. Signed-off-by:
Andre Guedes <andre.guedes@openbossa.org> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Andre Guedes authored
This patch renames the function mgmt_inquiry_failed() to mgmt_start_discovery_failed(). This function is more related to MGMT_OP_START_DISCOVERY command handling than to inquiry. Besides, this functions will be reused by LE based discovery procedures in case of failure. Signed-off-by:
-
- 10 Nov, 2011 7 commits
-
-
Gustavo F. Padovan authored
Signed-off-by: -
Gustavo F. Padovan authored
Some incomming connections needs to increase the security level by requesting encryption for example (HID keyboard case). This change allows the userspace to change it through setsockopt with defer_setup enabled. Signed-off-by: -
Gustavo F. Padovan authored
rename to l2cap_chan_check_security() to make it consistent with other l2cap_exported functions. This function will be exported in a later commit. Signed-off-by: -
Johan Hedberg authored
Since disconnecting may fail the status needs to be communicated to user space. This also updates the implementation to match the latest mgmt API specification. Signed-off-by:
-
Johan Hedberg authored
Since the command can fail we need to have a proper response with the remote address and a failure status for it. This also updates it to conform to the latest mgmt API spec. Signed-off-by:
-
Johan Hedberg authored
The hci_conn callbacks are called with the hci_dev lock already held so no locking should be attempted in them. Signed-off-by:
-
Johan Hedberg authored
It's necessary to know the distinction between public and random LE addresses so the mgmt interface also needs to distinguish between them. Signed-off-by:
-
- 09 Nov, 2011 26 commits
-
-
Dan Carpenter authored
Probably we never hit this condition, but in case we do, we may as well put a return here instead of just printing a warning message and then corrupting memory. The caller doesn't check the return code. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
By default SDIO multiport aggregation is disabled. It's useful to get good throughput results. This patch enables it. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
-
Dan Carpenter authored
We dereference adapter in the error handling code so this needed to be fixed. This function is always called like: adapter->if_ops.host_to_card(adapter, ...); so adapter can never be NULL and I've removed the NULL check. Signed-off-by:
-
Dan Carpenter authored
The previous if statement means this that pointer is NULL so there is no need to free it. Signed-off-by:
-
Julia Lawall authored
Use kstrtoul, etc instead of the now deprecated strict_strtoul, etc. A semantic patch rule for the kstrtoul case is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a,b; {int,long} *c; @@ -strict_strtoul +kstrtoul (a,b,c) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
Use kstrtoul, etc instead of the now deprecated strict_strtoul, etc. A semantic patch rule for the kstrtoul case is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a,b; {int,long} *c; @@ -strict_strtoul +kstrtoul (a,b,c) // </smpl> Signed-off-by:
-
Johannes Berg authored
Implement the socket wifi TX status error queue reflection in mac80211. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
The new wifi socket TX capability should be supported by wifi drivers, let them advertise whether they do or not. Signed-off-by:
-
Helmut Schaa authored
Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
-
Franky Lin authored
Prepare for adding backplane interconnect type support Reviewed-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
Franky Lin <frankyl@broadcom.com> Signed-off-by:
-
Franky Lin authored
Use SSB macros in order to clean up brcmfmac code Reviewed-by:
-
Franky Lin authored
This patch is part of the abstracting chip backplane handle code series. Reviewed-by:
-
Franky Lin authored
This patch is part of the abstracting chip backplane handle code series. Reviewed-by:
-
Franky Lin authored
This patch is part of the abstracting chip backplane handle code series. Reviewed-by:
-
Franky Lin authored
Prepare for adding backplane interconnect type support Reviewed-by:
-
Franky Lin authored
Prepare for adding backplane interconnect type support Reviewed-by:
-
Franky Lin authored
Merged brcmf_sdbrcm_chip_attach into brcmf_sdio_chip_attach for better readability. Reviewed-by:
-
Franky Lin authored
Same register writes have been done in brcmf_sdbrcm_probe_init which is earlier in the same code path. Reviewed-by:
-
Franky Lin authored
This patch is part of the abstracting chip backplane handle code series. Reviewed-by:
-
Franky Lin authored
This will provide a better code flow that fits the logic Reviewed-by:
-
Franky Lin authored
This patch is part of the abstracting chip backplane handle code series. Reviewed-by:
-
Franky Lin authored
This patch is part of the abstracting chip backplane handle code series. Reviewed-by:
Roland Vossen <rvossen@broadcom.com> Signed-off-by:
-
Franky Lin authored
This patch is part of abstracting chip backplane handle code series. Reviewed-by:
-
Franky Lin authored
Currently backplane handle code is scatterd around dhd_sdio.c which is not good for maintenance and adding new backplane interconnect type support. This patch and the follow up patches are going to abstract all chip backplane control code specific for sdio bus into this new sdio_chip.c Reviewed-by:
-
Franky Lin authored
4329 with chiprev 0 can not be found on any product. The code can be removed. Reviewed-by:
-
Johannes Berg authored
For probe responses it can be useful to not wait for ACK to avoid retransmissions if the station that sent the probe is already on the next channel, so allow userspace to request not caring about the ACK with a new nl80211 flag. Since mac80211 needs to be updated for the new function prototype anyway implement it right away -- it's just a few lines of code. Signed-off-by:
-
