- 29 Oct, 2002 40 commits
-
-
bk://linux.bkbits.net/linux-2.5Marcel Holtmann authored
into hostme.bitkeeper.com:/ua/repos/l/linux-bt/bt-2.5
-
Alexander Viro authored
- add lo->lo_blocksize - kill lo_get_bs() - great name, but... - set ->lo_device only if we do have a block device - pull determination of ->lo_blocksize into both branches - bdev variant gets it from lo_device and file one uses ->i_blocksize. - switched the ioctl getting information about underlying object to lo->lo_device ? stat.rdev : stat.dev - i.e. st_rdev of underlying object if it's a device and st_dev - if it's a file. - reverted the bogosity in shmem.c
-
Neil Brown authored
-
http://gkernel.bkbits.net/misc-2.5Linus Torvalds authored
into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux
-
Jeff Garzik authored
-
Jeff Garzik authored
into redhat.com:/home/jgarzik/repo/misc-2.5
-
Andrew Morton authored
Patch from Hugh Dickins Added shmem_readpage and shmem_prepare_write so tmpfs files can be used by the loop driver (together with simple_commit_write). shmem_getpage extended to accept file page passed in, which may have to be copied over from swap page. Use bdget and sb_set_blocksize so loop can see our preferred blocksize PAGE_CACHE_SIZE. Use copy_highpage, removed from highmem.h in 2.4.17: restore it but with kmap_atomics. Restore (a simple) copy_page to asm-sparc64/page.h, which alone of all arches discarded it.
-
Andrew Morton authored
Patch from Hugh Dickins From Matthew Wilcox <willy@debian.org>: shmem_getpage must flush_dcache_page after allocating and clearing a new page.
-
Andrew Morton authored
Patch from Hugh Dickins Checked shmem_file_write against recent filemap source, and against 2.4 and 2.4-ac: folded in missing fixes, mostly related to far file positions. Plus the new kmap_atomic copying technique. But for now, as before, no mark_page_accessed or SetPageReferenced in shmem.c: add those, or whatever, later on when akpm has reviewed usage elsewhere.
-
Andrew Morton authored
Patch from Hugh Dickins Added shmem_file_sendfile to allow sendfile from tmpfs. Checked do_shmem_file_read and shmem_file_read against filemap equivalents to add in any recent fixes (-EINVAL when count < 0 was missing).
-
Andrew Morton authored
Patch from Hugh Dickins Remove obsolete shmem_fs_type: we were in some doubt whether safe yet to do so, then found 2.5.4 typo changed it from 2.4's "shm" to "shmem" ever since: nobody complained, delete it - we're "tmpfs" since 2.4.4. Use libfs' simple_empty and simple_sync_file instead of homegrown. Remove exit_shmem_fs, it fools people that this might be a module. Allow for faint possibility that shm_mnt could not be initialized.
-
Andrew Morton authored
Patch from Hugh Dickins Here I intended a patch to remove the unsatisfactory shmem_recalc_inode (which tries to work out when vmscan has freed undirtied hole pages, to relax its blocks-in-use limit; but can only do so per-inode when it needs to be per-super). I had hoped to use the releasepage method, but it looks like it can't quite be bent to this task, the page might still be rebusied after release. 2.4-ac uses a removepage method dedicated to this, but I'm reluctant to ask for such a minor address_space_operation. So, leave shmem_recalc_inode as is, but avoid the issue as much as possible, by letting shmem_getpage use the empty_zero_page instead of allocating when a hole is read (but this cannot be done when it's being mapped, nowadays the nopage doesn't know if page will be copied or not). Whereupon shmem_getpage(,,,SGP_READ) can do partial trunc's holdpage.
-
Andrew Morton authored
Patch from Hugh Dickins The last set of tmpfs patches left shmem_getpage with an inadequate next_index test to guard against races with truncation. Now remove that check and settle the issue with checks against i_size within shmem_swp_alloc, which needs to know whether reading or writing.
-
Andrew Morton authored
Patch from Hugh Dickins shmem_getpage does need to lock its page (to secure it against shmem_writepage), but it's easier for its callers if it unlocks before returning. The only caller who appeared to be using the page lock was shmem_file_write, but it wasn't actually protecting against anything - i_sem prevents concurrent writes and truncates, and do_shmem_file_read was dropping the lock before copying anyway.
-
Alexander Viro authored
- name_to_kdev_t() turned into name_to_dev_t(), callers updated. - table of names is gone, we use driverfs instead. - root name is converted to dev_t only at prepare_namespace() time - we use to do it in setup and we need it after driver initialization. So setup only stores the root name and leaves the work to prepare_namespace(). - disk names for rd and cm206 changed to match the old behaviour of root= parser: ramdisks have ram<n> in ->disk_name now (instead of rd<n>) and cm206 - cm206cd (instead of cm206).
-
Pavel Machek authored
This uses better constraints that do not go through the register unneccessarily.
-
Pavel Machek authored
Do not oops when no swapfile is available and make it compile on DISCONTIGMEM machines.
-
Brian Gerst authored
This patch does a few cleanups/fixes with __verify_write: - Only compile it when needed. - Move test for KERNEL_DS out of line. - The mmap semaphore is needed to access the vma list. - Use fixmap for the WP test. - Removes an obsolete comment in fixmap.h
-
Brian Gerst authored
It was copied from i386 and is unused.
-
Christoph Hellwig authored
-
Brian Gerst authored
This fixes PTRACE_GETFPREGS to initilize the fpu struct correctly on cpus with fxsr, as well as removing redundant code.
-
Alexander Viro authored
- fixes an idiocy with floppy_find() et.al. - they forgot to set *part to 0. As the result, open() on anything other than fd0 had lead to interesting effects... - fixes off-by-1 in set_disk_ro().
-
Linus Torvalds authored
implementation. The optimized versions only work for large areas, make sure we don't use them for anything else.
-
Linus Torvalds authored
configuration system, and instead just cleanly show the dependency.
-
Christoph Hellwig authored
The ifdef <actual cpu selection> is very bad style, we usually introduce feature CONFIG_ options in config.in instead.
-
bk://linuxusb.bkbits.net/pci_hp-2.5Linus Torvalds authored
into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux
-
bk://linuxusb.bkbits.net/pnp-2.5Linus Torvalds authored
into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux
-
Greg Kroah-Hartman authored
into kroah.com:/home/greg/linux/BK/pci_hp-2.5
-
Linus Torvalds authored
into home.transmeta.com:/home/torvalds/v2.5/linux
-
Hirofumi Ogawa authored
- cleanup - remove unneeded mark_inode_dirty() in fat_extend_dir()
-
Hirofumi Ogawa authored
This removes fat_cvf stuff, and adds printk() level. As far as I know, all the challengers gave up porting of fat_cvf. (This patch from Christoph Hellwig)
-
Hirofumi Ogawa authored
This removes the conv option. This option does nothing, now. (This patch from René Scharfe)
-
Greg Kroah-Hartman authored
into kroah.com:/home/greg/linux/BK/pnp-2.5
-
Robert Love authored
-
http://gkernel.bkbits.net/misc-2.5Linus Torvalds authored
into home.transmeta.com:/home/torvalds/v2.5/linux
-
http://gkernel.bkbits.net/net-drivers-2.5Linus Torvalds authored
into home.transmeta.com:/home/torvalds/v2.5/linux
-
http://jfs.bkbits.net/linux-2.5Linus Torvalds authored
into home.transmeta.com:/home/torvalds/v2.5/linux
-
Linus Torvalds authored
into home.transmeta.com:/home/torvalds/v2.5/linux
-
Linus Torvalds authored
into home.transmeta.com:/home/torvalds/v2.5/linux
-
Linus Torvalds authored
into home.transmeta.com:/home/torvalds/v2.5/linux
-