- 25 May, 2011 5 commits
-
-
Ben Gardiner authored
Extract functions that modify the prtd->period member in preparation for conversion to BATCH mode playback. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Steven Faludi <stevenfaludi@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Ben Gardiner authored
The release of the dma channels was being performed in prepare and there was a edma_resume call for the asp-channel only being executed on START, RESUME and PAUSE_RELEASE. The mcasp on da850evm with ping-pong buffers enabled was exhibiting an audible glitch on every playback after the first. It was determined through trial and error that the following two changes fix this problem: 1) Move the edma_start calls from prepare to trigger and 2) reverse the order of starting the asp and ram channels. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Steven Faludi <stevenfaludi@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Ben Gardiner authored
Based on the registration of davinci-mcasp.1 in the davinci-evm platform setup for da830 and dm6467, davinci-pcm can handle more than the currently reported maximum channels of 2. Increase the maximum channels to 384 to match the maximum reported by davinci-mcasp.1. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Steven Faludi <stevenfaludi@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Ben Gardiner authored
Based on the data_type test in ping_pong_dma_setup, davinci-pcm is capable of handling data of width up to and including 32bits. " if ((data_type == 0) || (data_type > 4)) { printk(KERN_ERR "%s: data_type=%i\n", __func__, data_type); return -EINVAL; } " Update the .format member of the snd_pcm_hardware instances it registers to reflect this capability. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Steven Faludi <stevenfaludi@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Ben Gardiner authored
The setup of the pong channel uses EDMA_CHAN_SLOT instead of & 0x3f as the setup of the ping channel does. Make the setup of ping and pong symmetric. There is no functional change introduced by this patch. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Steven Faludi <stevenfaludi@nanometrics.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 24 May, 2011 10 commits
-
-
Kuninori Morimoto authored
This patch is preparation of cleanup suspend/resume patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
Current FSI driver was using saved_xxx variable for suspend/resume. OTOH, the start and stop of power/clock are controlled by fsi_hw_startup/fsi_hw_shutdown in current FSI driver. The all necessary registers value are set by fsi_hw_startup. So, if fsi_hw_shutdown is called when "suspend" is generated, and fsi_hw_startup is called at "resume", the saved_xxx are not needed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
FSIA/B ports is enabled by default when power-on, and current FSI is supporting RuntimePM. In addition, current fsi_module_init/kill doesn't care simultaneous playback/recorde. This mean FSI port control is not needed. This patch remove fsi_module_init/kill Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
fsi_stream_push/pop might be called in same time. This patch protect it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
pm_runtime_get/put_sync were used to access FSI register in fsi_dai_set_fmt which is called when ALSA probe. But this register value will disappear after pm_runtime_put_sync if platform is supporting RuntimePM. To solve this issue, this patch adds new variable for format, and remove pm_runtime_get/put_sync from fsi_dai_set_fmt. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
Some variables on this driver were a unclear naming, and were different unit (byte, frame, sample). And some functions had wrong name (ex. it returned "sample width" but name was "fsi_get_frame_width"). This patch tidy-up this issue, and the minimum unit become "sample". Special thanks to Takashi YOSHII. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
Using fsi_irq_enable/disable in fsi_port_start/stop is very natural. This patch is preparation of cleanup suspend/resume patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
Current FSI driver is using set_rate call back function which is for master mode. By this patch, it is used from fsi_set_master_clk. This patch is preparation of cleanup suspend/resume patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
It is possible to create buff_len and period_len from substream->runtime. This patch is preparation of tidyup unclear variable naming patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Make it clear what we're doing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
-
- 20 May, 2011 2 commits
-
-
Dimitris Papastamos authored
Whenever we are doing a read or a write through the rbtree code, we'll cache a pointer to the rbnode. To avoid looking up the register everytime we do a read or a write, we first check if it can be found in the cached register block, otherwise we traverse the rbtree and finally cache the rbnode for future use. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Dimitris Papastamos authored
This patch prepares the ground for the actual rbtree optimization patch which will save a pointer to the last accessed rbnode that was used in either the read() or write() functions. Each rbnode manages a variable length block of registers. There can be no two nodes with overlapping blocks. Each block has a base register and a currently top register, all the other registers, if any, lie in between these two and in ascending order. The reasoning behind the construction of this rbtree is simple. In the snd_soc_rbtree_cache_init() function, we iterate over the register defaults provided by the driver. For each register value that is non-zero we insert it in the rbtree. In order to determine in which rbnode we need to add the register, we first look if there is another register already added that is adjacent to the one we are about to add. If that is the case we append it in that rbnode block, otherwise we create a new rbnode with a single register in its block and add it to the tree. In the next patch, where a cached rbnode is used by both the write() and the read() functions, we also check if the register we are about to add is in the cached rbnode (the least recently accessed one) and if so we append it in that rbnode block. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 10 May, 2011 4 commits
-
-
Mark Brown authored
-
Stephen Warren authored
Increase the range of the Digital Capture Volume control to be 120 steps. Each step is 0.75dB, and the range starts at -72dB, giving a max setting of 18dB, which matches the latest datasheet, to the precision of the step size. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Takashi Iwai authored
Merge branch 'for-2.6.40' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc
-
Takashi Iwai authored
Merge branch 'for-2.6.40' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
-
- 08 May, 2011 17 commits
-
-
Lars-Peter Clausen authored
Also fix the maximum value for the capture volume control. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Lars-Peter Clausen authored
Model the power supply for the digital core as a DAPM_SUPPLY widget. This allows to cleanup the code a bit. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Lars-Peter Clausen authored
The SSM2603 is mostly register compatible with the SSM2602 and can be supported by the current driver without any changes. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Lars-Peter Clausen authored
The SSM2604 is basically a lightweight variant of the SSM2602 with a compatible register layout. Thus we can easily support both devices by the same driver, by providing a slightly set of controls, widgets and routes. Compared to the SSM2602 the SSM2604 has no microphone input and no headphone output. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Lars-Peter Clausen authored
It is not required to have the codec powered at this stage and DAPM will power the ADC and DAC down again after probe has run anyway. Thus we avoid some unnecessary writes by this change. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Lars-Peter Clausen authored
Some of the values in the default register cache did not represent the codecs state after reset. This patch fixes it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
-
Marek Belisko authored
Define POWER_OFF_ON_STANDBY cause trobles when trying to get some sound from codec because code for bias setup was not compiled (define wasn't defined). This define was removed in commit: cc3202f5 but again introduced by commit: f0fba2ad which then completely break codec functionality so remove it again. Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
Lars-Peter Clausen authored
Those are leftovers from a pre-multicomponent era. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Lars-Peter Clausen authored
There are currently two controls which allow selecting the capture source, one as a normal control, the other as part of a DAPM_MUX widget. Remove the normal control. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Lars-Peter Clausen authored
Drop unused field from the coeff struct, precalculate the srate register at compile-time and cleanup up the naming. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
-
Lars-Peter Clausen authored
reg_cache_size is supposed to be the number of elements in the register cache, not the size in bytes. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Lars-Peter Clausen authored
The 'Mic Boost2' control's shift was off by one and thus was not working. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
Lars-Peter Clausen authored
Annotate the i2c probe and remove functions with __devinit and __devexit. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Dimitris Papastamos authored
If we specifically want to write a block of data to the hw bypassing the cache, then allow this to happen inside snd_soc_hw_bulk_write_raw(). Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Lars-Peter Clausen authored
This allows to create DAPM routes depending on those widgets in the codecs probe function. This is helpful when supporting similar codecs with minor differences in the DAPM routing with the same driver. Something similar has already been done for cards in commit a841ebb9 (ASoC: Create card DAPM widgets early so they can be used in callbacks). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 03 May, 2011 2 commits
-
-
Mark Brown authored
-
xingchao authored
Signed-off-by: xingchao <xingchao.wang@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-