- 23 Jun, 2017 1 commit
-
-
Arnd Bergmann authored
This resolves a build error in the next/dt branch: In file included from arch/arm64/boot/dts/mediatek/mt6797-evb.dts:16:0: arch/arm64/boot/dts/mediatek/mt6797.dtsi:15:10: fatal error: dt-bindings/power/mt6797-power.h: No such file or directory 003f5d0c ("arm64: dts: mediatek: add clk and scp nodes for MT6797") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
- 19 Jun, 2017 15 commits
-
-
Olof Johansson authored
Merge tag 'imx-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64 The Freescale arm64 device tree updates for 4.13: - A series from NXP employee Li Yang that updates the copyright claims to comply with company policy. - A patch-set from Madalin Bucur that adds Data Path Acceleration Architecture (DPAA) QBMan and FMan. Quite a few .dtsi files are created for SoCs with different DPAA configuration to include the devices as needed. - Enable UHS-I SD and eMMC support for LS1046A and LS208xA RDB/QDS boards. - Enable TMU device for thermal management support on LS1088A. - Update SATA device node for LS1088A with correct compatible and ECC register bit. - A few small random device tree updates. * tag 'imx-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits) arm64: dts: ls1088a: update sata node dt-bindings: ahci-fsl-qoriq: add ls1088a chip name to the list arm64: dts: ls1012a: Add coreclk arm64: dts: ls1046a: Add dis_rxdet_inp3_quirk property to USB3 node arm64: dts: ls208xa: disable SD UHS-I modes by default on RDB arm64: dts: ls1043a: Add generic compatible string for I2C EEPROM arm64: dts: add LS1046A DPAA FMan nodes arm64: dts: add LS1043A DPAA FMan support arm64: dts: add DPAA FMan nodes arm64: dts: add LS1046A DPAA QBMan nodes arm64: dts: add LS1043A DPAA QBMan nodes arm64: dts: add DPAA QBMan portals arm64: dts: ls1088a: Add TMU device tree support arm64: dts: ls1088a: update the sata node arm64: dts: Add flash node for ls1088a qds and rdb arm64: dts: ls1088a: add esdhc node arm64: dts: ls1012a: add eSDHC nodes arm64: dts: ls208xa: support SD UHS-I on RDB and eMMC HS200 on QDS arm64: dts: ls1046a: support SD UHS-I and eMMC HS200 on RDB mmc: dt: add compatible into eSDHC required properties ... Signed-off-by: Olof Johansson <olof@lixom.net>
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
mvebu dt64 for 4.13 (part 1) - Improve the mcbin support (Armada 8040 based board): add sdhci and the second 1G port - Improve crypro nodes description on Aramda 7K/8K - Use new binding for ap806 clocks - Improve mdio nodes and add xmdio on Aramda 7K/8K - Add second SGCI node on Armada 37xx - Improve the description of the Armada 3720 DB board * tag 'mvebu-dt64-4.13-1' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: add xmdio nodes for 7k/8k arm64: dts: marvell: add a comment on the cp110 slave node status arm64: dts: marvell: remove cpm crypto nodes from dts files arm64: dts: marvell: cp110: enable the crypto engine at the SoC level arm64: dts: marvell: armada-3720-db: Add vqmmc regulator for SD slot arm64: dts: marvell: Enable second SDHCI controller in Armada 37xx arm64: dts: marvell: armada-37xx: Use angle bracket for each register set arm64: dts: marvell: armada-37xx: Align the compatible string arm64: dts: marvell: armada-3720-db: Add information about the V2 board arm64: dts: marvell: armada-3720-db: Sort the dts node alphabetically arm64: dts: marvell: disable the mdio nodes by default arm64: dts: marvell: explicitly enable the mdio nodes for 7k/8k DB arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k arm64: dts: marvell: 8040-mcbin: Enable 1GB Ethernet arm64: dts: marvell: cp110: add required clocks for mdio interface arm64: dts: marvell: use new binding for the system controller on ap806 arm64: dts: marvell: remove clock-output-names on ap806 arm64: dts: marvell: add second 1G port on the Armada 8040 DB arm64: dts: marvell: mcbin: add sdhci arm64: dts: marvell: add clocks for Armada AP806 XOR engines Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'renesas-arm64-dt2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64 Second Round of Renesas ARM64 Based SoC DT Updates for v4.13 * Add reset control properties for audio to r9a779[56] SoCs * Add add DMA for IIC_DVFS to r9a779[56] SoCs * Add support for Salvator-XS and H3ULCB with R-Car H3 (r8a7795) ES2 * Add missing index to PWM pinctrl subnode name to Salvator-X board * Add 12288000 for sound ADG to Salvator-X and ULCB boards * tag 'renesas-arm64-dt2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: r8a7796: Add reset control properties for audio arm64: dts: r8a7795: Add reset control properties for audio arm64: dts: renesas: Add support for Salvator-XS with R-Car H3 ES2.0 arm64: dts: renesas: Add common Salvator-XS board support arm64: dts: renesas: Extract common Salvator-X/XS board support arm64: dts: salvator-x: Add missing index to PWM pinctrl subnode name arm64: dts: r8a7795: h3ulcb: Add support for R-Car H3 ES2.0 arm64: dts: r8a7796: add DMA for IIC_DVFS arm64: dts: r8a7795: add DMA for IIC_DVFS arm64: dts: ulcb: add 12288000 for sound ADG arm64: dts: salvator-x: add 12288000 for sound ADG Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'qcom-arm64-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64 Qualcomm ARM64 Updates for v4.13 * Fix APQ8016 SBC WLAN LED * Add MSM8996 CPU node * Add MSM8992 SMEM and fixed regulator * Fixup MSM8916 USB support * tag 'qcom-arm64-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: apq8016-sbc: Correct WLAN LED default-trigger arm64: dts: msm8996: Add CPU clock controller node arm64: dts: smem enablement for msm8992 arm64: dts: msm8992 add fixed regulator arm64: dts: qcom: Collapse usb support into one node Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'tegra-for-4.13-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64 arm64: tegra: Device tree changes for v4.13-rc1 This adds the CCPLEX cluster on Tegra186, which is used to initiate CPU frequency and voltage transitions. Also included is a bit of cleanup for PCI related device tree content, in preparation for a future DTC release that has additional checks for the PCI bus. * tag 'tegra-for-4.13-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: dts: nvidia: fix PCI bus dtc warnings arm64: tegra: Add CCPLEX_CLUSTER area in Tegra186 Signed-off-by: Olof Johansson <olof@lixom.net>
-
git://github.com/hisilicon/linux-hisiOlof Johansson authored
ARM64: DT: Hisilicon SoC DT updates for 4.13 - Add and update Hi3660-Hikey960 board, Hi3660 PCIe RC, Hi6421v530 MFD and Hi3660 MMC binding - Add and refine devices support for Hi3660-Hikey 960 including clock, reset, I2C, GPIO, UART, Bluetooth, RTC, Power Key, LED, SPI, timer, PMIC, regulator, sd/sdio and WiFi - Add k3-dma and i2s/hdmi audio support based on audio-card-graph method for Hikey board * tag 'hisi-arm64-dt-for-4.13-v2' of git://github.com/hisilicon/linux-hisi: (21 commits) arm64: dts: hi6220: Add k3-dma and i2s/hdmi audio support arm64: dts: hi3660-hikey960: add nodes for WiFi arm64: dts: hi3660: add sd/sdio device nodes dt-bindings: mmc: dw_mmc-k3: add document of hi3660 mmc arm64: dts: hikey960: add device node for pmic and regulators dt-bindings: mfd: hi6421: Add hi6421v530 compatible string arm64: dts: hisi: add kirin pcie node dt-bindings: PCI: hisi: Add document for PCIe of Kirin SoCs arm64: dts: hi3660: add sp804 timer node arm64: dts: hi3660: add spi device nodes arm64: dts: hikey960: add LED nodes arm64: dts: hi3660: add power key dts node arm64: dts: hi3660: Add pl031 rtc node arm64: dts: hikey960: add WL1837 Bluetooth device node arm64: dts: hi3660: Add uarts nodes arm64: dts: hi3660: add gpio dtsi file for Hisilicon Hi3660 SOC arm64: dts: Add I2C nodes for Hi3660 arm64: dts: hi3660: add resources for clock and reset arm64: dts: hikey960: pinctrl: add more pinmux and pinconfig arm64: dts: hisilicon: update compatible string for hikey960 ... Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'juno-updates-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt64 ARMv8 Vexpress/Juno DT updates for v4.13 1. Adds support for Coresight CPU debug MMIO interface on all Juno variants. 2. Enables support for few SMMUs on Juno which were previously disabled waiting for IOMMU-backed DMA API support to be stabilised. * tag 'juno-updates-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: juno: enable some SMMUs arm64: dts: juno: add coresight CPU debug nodes Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'sunxi-dt-h5-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64 Allwinner H5 DT changes for 4.13 Just like the H3, this is mostly about enabling the EMAC on the H5, and also has a new board, the Orange Pi Zero Plus 2 * tag 'sunxi-dt-h5-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: allwinner: h5: Add initial Orangepi Zero Plus 2 support arm64: allwinner: h5: enable dwmac-sun8i for Nano Pi NEO2 arm64: allwinner: h5: enable dwmac-sun8i for Orange Pi Prime arm64: allwinner: h5: sort the device nodes in / part for some boards arm64: allwinner: h5: add support for NanoPi NEO2 board arm64: allwinner: h5: add support for Orange Pi Prime board arm64: allwinner: orangepi-pc2: Enable dwmac-sun8i arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module ARM: sunxi: h3-h5: Convert R_CCU raw numbers to macros Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'sunxi-dt64-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64 Allwinner arm64 DT changes for 4.13 Our usual arm64 changes. The most notable things are the EMAC support and USB support enhancements. There's also support for the SoPine SoM, and the OrangePi Win. * tag 'sunxi-dt64-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: allwinner: a64: Add initial Orangepi Win/WinPlus support arm64: allwinner: a64: add device tree for SoPine with baseboard arm64: allwinner: bananapi-m64: Enable dwmac-sun8i arm64: allwinner: pine64-plus: Enable dwmac-sun8i arm64: allwinner: pine64: Enable dwmac-sun8i arm64: allwinner: sun50i-a64: add dwmac-sun8i Ethernet driver arm64: allwinner: sun50i-a64: Add dt node for the syscon control module arm64: allwinner: a64: add DTSI file for SoPine SoM arm64: allwinner: a64: Convert CCU raw number references to macros arm64: dts: allwinner: pine64: Prepare optional UART nodes with pinctrl arm64: allwinner: a64: enable RSB on A64 arm64: dts: allwinner: pine64: Add remaining UART aliases arm64: dts: allwinner: a64: Add UART2 pin nodes arm64: allwinner: a64: enable EHCI0/OHCI0 for Pine64 arm64: allwinner: a64: add EHCI0/OHCI0 nodes to A64 DTSI Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64 Amlogic 64-bit DT changes for v4.13 - cleanup/reorganize alphabetically to better avoid conflicts - add HDMI and CVBS nodes for multiple boards - new pinctrl pins: SPI, HDMI CEC - SCPI: fix thermal sensor reporting New board support - NanoPi K2 (GXBB) - R-Box Pro (GXM) * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (36 commits) ARM64: dts: meson-gxl-s905x-p212: Add HDMI and CVBS nodes ARM64: dts: meson-gxl-s905x-khadas-vim: Add HDMI nodes ARM64: dts: meson-gxl-s905d-p230: Add HDMI nodes ARM64: dts: meson-gxbb-wetek-play2: Add HDMI and CVBS Nodes ARM64: dts: meson-gx: Fix sensors reporting from SCP ARM64: dts: meson-gxl: Add SPI pinctrl nodes ARM64: dts: meson-gxbb: Add SPI pinctrl nodes ARM64: dts: meson-gxl: Add Ethernet PHY LEDS pins nodes ARM64: dts: meson-gxl: Add CEC pins nodes ARM64: dts: meson-gxbb: Add CEC pins nodes ARM64: dts: Fix GXBB periphs pinctrl pull-enable register base ARM64: dts: Fix GXL periphs pinctrl pull-enable register base ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges arm64: dts: amlogic: Add NanoPi K2 dt-bindings: arm: amlogic: Add NanoPi K2 arm64: dts: meson-gxm: Add R-Box Pro dt-bindings: arm: amlogic: Add R-Box Pro dt-bindings: Add Kingnovel vendor prefix arm64: dts: meson-gx-p23x-q20x: Fix node order arm64: dts: meson-gxm-nexbox-a1: Fix node order ... Signed-off-by: Olof Johansson <olof@lixom.net>
-
http://github.com/Broadcom/stblinuxOlof Johansson authored
This pull request contains Broadcom ARM64-based SoCs Device Tree changes for 4.13. Please note the following from Eric: I've based this summary on the bcm2835-dt-next tag, to clarify what's in this patch series, but it does require being careful since it involves a cross-merge between branches. - Anup documents the Broadcom Stingray binding, common clocks, adds initial support for the Stingray DTSI and DTS files and adds support for the PL022, PL330 and SP805 - Sandeep adds the clock nodes to the Stingray Device Tree nodes - Pramod adds support for the NAND, pinctrl, GPIO to the Stingray Device Tree nodes - Oza adds I2C Device Tree nodes to the Stingray DTSes - Srinath adds PWM and SDHCI Device Tree nodes for the Stingray SoC - Ravijeta adds support for the USB Dual Role PHY on Northstar 2 - Gerd starts adding references to the sdhost and sdhci controllers, and then switches the sdcard to to use the SDHOST (faster than SDHCI) - Stefan defines the BCM2837 thermal coefficients in order for the Raspberry Pi thermal driver to work correctly * tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux: arm64: dts: NS2: Add USB DRD PHY device tree node ARM64: dts: bcm2837: Define CPU thermal coefficients arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray arm64: dts: Add I2C DT nodes for Stingray SoC arm64: dts: Add GPIO DT nodes for Stingray SOC arm64: dts: Add pinctrl DT nodes for Stingray SOC arm64: dts: Add NAND DT nodes for Stingray SOC arm64: dts: Add clock DT nodes for Stingray SOC arm64: dts: Initial DTS files for Broadcom Stingray SOC dt-bindings: clk: Extend binding doc for Stingray SOC dt-bindings: bcm: Add Broadcom Stingray bindings document ARM: dts: bcm283x: switch from &sdhci to &sdhost arm64: dts: bcm2837: add &sdhci and &sdhost ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6) Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'uniphier-dt64-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64 UniPhier ARM64 SoC DT updates for v4.13 - specify timing delay properties of eMMC - fix W=1 build warnings - increase memory reserve size - use SPDX License Identifier - add new board support (LD11/LD20 global) * tag 'uniphier-dt64-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: arm64: dts: uniphier: add support for LD20 Global board arm64: dts: uniphier: add support for LD11 Global board arm64: dts: uniphier: use SPDX-License-Identifier arm64: dts: uniphier: reserve more memory for LD11/LD20 arm64: dts: uniphier: fix simple-bus unit address format error arm64: dts: uniphier: Use - instead of @ for DT OPP entries arm64: dts: uniphier: add cdns, phy-dll-delay-sdclk(-hsmmc) for eMMC arm64: dts: uniphier: add input-delay properties to Cadence eMMC node Signed-off-by: Olof Johansson <olof@lixom.net>
-
https://github.com/mbgg/linux-mediatekOlof Johansson authored
Add device tree nodes for mt8173: - split USB SuperSpeed port in HighSpeed and SuperSpeed ports. - move USB phy clocks up in hierarchy to met new bindings description - move MDP nodes up in hierarchy to met new bindings description mt6797: - add basic SoC support - add clock driver - add power domain dt-bindings: - clean-up i2c binding description - add binding for mt2701 i2c node - add fallback compatible to scpsys binding description - add bindings description for mt7622 and mt6796 * tag 'v4.12-next-dts64' of https://github.com/mbgg/linux-mediatek: dt-bindings: mediatek: add bindings for MediaTek MT7622 SoC arm64: dts: mt8173: Fix mdp device tree dt-bindings: i2c: Add Mediatek MT2701 i2c binding dt-bindings: i2c-mtk: Add mt7623 binding dt-bindings: i2c-mtk: Delete bindings dt-bindings: i2c-mt6577: Rename file to reflect bindings dt-bindings: mtk-sysirq: Correct bindings for supported SoCs arm64: dts: mediatek: add clk and scp nodes for MT6797 dt-bindings: mediatek: add MT6797 power dt-bindings arm64: dts: mediatek: add mt6797 support dt-bindings: mediatek: Add bindings for mediatek MT6797 Platform arm64: dts: mt8173: move clock from phy node into port nodes arm64: dts: mt8173: split usb SuperSpeed port into two ports Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'samsung-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64 Samsung DeviceTree ARM64 update for v4.13: 1. Remove unneeded TE interrupt gpio property. * tag 'samsung-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Remove the te-gpios property in the TM2 boards Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64 Support for the new rk3399 firefly board; extending the pcie ranges to make usage of pci switches possible; some more qos and pinctrl nodes on rk3399; updates for the rk3399 cpu operating points including separate opps for the higher rates OP1 variant of the chip and mmc-nodes for the rk3328. * tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: update common rk3399 operating points arm64: dts: rockchip: introduce rk3399-op1 operating points arm64: dts: rockchip: enable usb3 controllers on rk3399-firefly arm64: dts: rockchip: add ethernet0 alias on rk3399 arm64: dts: rockchip: bring rk3399-firefly power-tree in line arm64: dts: rockchip: add sdmmc/sdio/emmc nodes for RK3328 SoCs arm64: dts: rockchip: extent IORESOURCE_MEM_64 of PCIe for rk3399 arm64: dts: rockchip: extent bus-ranges of PCIe for rk3399 arm64: dts: rockchip: add pinctrl settings for some rk3399 peripherals arm64: dts: rockchip: add some missing qos nodes on rk3399 arm64: dts: rockchip: add support for firefly-rk3399 board dt-bindings: add firefly-rk3399 board support Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 17 Jun, 2017 20 commits
-
-
Antoine Tenart authored
Add the description of the xMDIO bus for the Marvell Armada 7k and Marvell Armada 8k; for both CP110 slave and master. This bus is found on Marvell Ethernet controllers and provides an interface with the xMDIO bus. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Antoine Tenart authored
The cryptographic engine found on the cp110 slave is disabled by default because of some known limitations. Add a comment to explain why it is disabled by default. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Antoine Tenart authored
The cryptographic engine on the master cp110 is now enabled by default at the SoC level. Remove its dts nodes that were only enabling it. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Antoine Tenart authored
Enable the cryptographic engine at the SoC level on the master cp110. This engine is always present and do not depends on any pinmux configuration. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Gregory CLEMENT authored
By adding this regulator, the SD cards are usable at higher speed protocols such as SDR104. This patch was tested with an SD HC card compatible with UHS-I. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Konstantin Porotchkin authored
The Armada 37xx SoCs has 2 SDHCI interfaces. This patch adds the second one. Moreover, the Armada 37xx DB v2 board populates the 2 SDHCI interfaces. The second interface is using pluggable module that can either have an SD connector or eMMC on it. This patch adds support for SD module in the device DT. [ gregory.clement@free-electrons.com: - Add more detail in commit log - Sort the dt node in address order - Document the SD slot in the dts ] Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Gregory CLEMENT authored
When several groups of register address and size are used with reg, then surround each one by angle bracket. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Gregory CLEMENT authored
This cosmetic patch aligns the compatible string when there are on several lines. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Gregory CLEMENT authored
The initial device tree file was for the board V1.4. Now the V2.0 board is also available. The same dtb will work for both, but the CON number have changed, so update the comment in the dts to reflect this. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Gregory CLEMENT authored
Sort the reference nodes in alphabetical order to ease the merge of future nodes. Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Antoine Tenart authored
Disable the mdio nodes by default in the cp110 slave and master dtsi as they're not wired on every board. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Antoine Tenart authored
Explicitly enable the MDIO nodes in the Marvell Armada 7k DB and Marvell Armada 8k DB. This is needed as the MDIO nodes will be disabled in the CP 110 slave and master dtsi by a following up patch. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Antoine Tenart authored
The EIP197 cryptographic engine supports 64 bits address width but is limited to 40 bits on 7k/8k. Add a dma-mask property in the cryptographic engine nodes to reflect this. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Marc Zyngier authored
Enable the 1GB Ethernet interface that lives on the slave CP110, with its corresponding phy (that oddly lives on the master CP110). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Russell King authored
Add the three required clocks for the MDIO interface to be functional on Armada 8k platforms. Without this, the CPU hangs, causing RCU stalls or the system to become unresponsive. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [Thomas: - remove mg_core_clock, since it's a parent of mg_clock - also add clock references to the slave CP mdio instance] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Gregory CLEMENT authored
The new binding for the system controller on ap806 moved the clock into a subnode. This preliminary step will allow to add gpio and pinctrl subnodes Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Gregory CLEMENT authored
The clock-output-names of the ap806-system-controller node are not used anymore, so remove them. Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Marcin Wojtas authored
Armada 8040 DB is equipped with 4 (2x 10G SFI + 2x 1G RGMII) ethernet ports of which only one was hitherto enabled. Because currently mvpp2 driver is capable of supporting only 1G RGMII/SGMII, enable second port from CP slave HW block. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Russell King authored
Add sdhci support for MACCHIATOBin boards. This uses the AP806 SDHCI for eMMC and CP110 master for the SD card slot. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Thomas Petazzoni authored
The XORv2 engines in the AP side of the Armada 7K/8K SoCs are using the AP MS core clock as input, so this commit adds the appropriate clocks properties. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
- 16 Jun, 2017 4 commits
-
-
John Stultz authored
Add entry for k3-dma driver and i2s/hdmi audio devices. This enables HDMI audio output. Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Andy Green <andy@warmcat.com> Cc: Dave Long <dave.long@linaro.org> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Antonio Borneo <borneo.antonio@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John Stultz <john.stultz@linaro.org> v2: * Split core i2s entry into dtsi and hdmi specific bits into hikey dts v4: * Rework simple-card to use many-dai-links method, as there may be other links in the future v5: * Rework audio description to use the audio-card-graph method as requested by Mark. Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
-
Guodong Xu authored
Add nodes for WiFi. HiKey960 is using TI WL1837MOD module. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
-
Li Wei authored
Add sd/sdio device nodes for hi3660 soc Signed-off-by: Li Wei <liwei213@huawei.com> Signed-off-by: Chen Jun <chenjun14@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
-
Guodong Xu authored
Add bindings for hi3660 mmc support Signed-off-by: Li Wei <liwei213@huawei.com> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
-