- 28 Oct, 2009 16 commits
-
-
Alexander Duyck authored
This update adds vlan tag stripping for inter-vf communications to the igb_vmm_control configuration function. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
This update delays the VF reset notification until after interrupts are enabled. Otherwise there is a chance of having the VF try to reset itself too soon and being ignored by the PF as a result. Signed-off-by:
-
Alexander Duyck authored
This patch moves the multiple receive queue configuration into a seperate function from igb_configure_rx. We can essentially do the configuration for the multiple receive queues just prior to enabling the RX and this will allow us to seperate the queue enablement from the receive queue layout configuration. Signed-off-by:
-
Alexander Duyck authored
This change adds a pointer to the netdev to the ring itself. The idea being at some point in the future it will be possible to support multiple netdevs from a single adapter struct. Signed-off-by:
-
Alexander Duyck authored
This patch adds a flags value to the ring that cleans up some of the last remaining items from the ring in order to help seperate it from the adapter struct. By implementing these flags it becomes possible for different rings to support different functions such as rx checksumming. Signed-off-by:
-
Alexander Duyck authored
The allocation failed and checksum error stats are currently kept as a global stat. If we end up allocating the queues to multiple netdevs then the global counter doesn't make much sense. For this reason I felt it necessary to move the alloc_rx_buff_failed stat into the rx_stats portion of the rx_ring. Signed-off-by:
-
Alexander Duyck authored
This patch moves the rx_buffer_len value into the ring structure. This allows greater flexibility and the option of doing things such as supporting packet split only on some queues, or enabling virtualization. Signed-off-by:
-
Alexander Duyck authored
This patch adds a pci device pointer to the ring structure. The main use of this pointer is for memory mapping/unmapping of the rings. Signed-off-by:
-
Alexander Duyck authored
Since we are writting to the head/tail pointers frequently we might as well save ourselves some processing time by converting the head and tail offsets directly to pointers. This will shave a few cycles off the rx/tx path and allows us to move one step closer to the rings being a bit more independant of each other. Signed-off-by:
-
Alexander Duyck authored
The SRRCTL register exists per ring. Instead of configuring all of them in the RCTL configuration which is meant to be global it makes more sense to move this out into the ring specific configuration. Signed-off-by:
-
Alexander Duyck authored
This patch removes the rx_ps_hdr_len which isn't really needed since we can now use rx_buffer_len less than 1K to indicate that we are in a packet split mode. We also don't need it since we always use a half page for the data buffers when receiving so we always know the size to map/unmap. Signed-off-by:
-
Alexander Duyck authored
This change makes the tx and rx config a bit cleaner by breaking out the ring specific configuration from the generic rx and tx configuration. Signed-off-by:
-
Alexander Duyck authored
This update increases the minimum rx buffer size to 1K. The reason for this change is to support SR-IOV and avoid any conflicts with the rings being able to set their own MTU sizes. Signed-off-by:
-
Alexander Duyck authored
Counting packets with a good checksum can cause a significant amount of cache line bouncing due to the shared counter being written to by all of the queues. In order to avoid this I am removing the counter since we still have the checksum failed counter which will tell us if there are any issues. Signed-off-by:
-
Alexander Duyck authored
Add a new igb_q_vector data structure to handle interrupts and NAPI. This helps to abstract the rings away from the adapter struct. In addition it allows for a bit of consolidation since a tx and rx ring can share a q_vector. Signed-off-by:
-
Jie Yang authored
remove duplicate atl1c_get_tpd, it may cause hardware to send wrong packets. Signed-off-by:
Jie Yang <jie.yang@atheros.com> Signed-off-by:
-
- 27 Oct, 2009 6 commits
-
-
Jasper Spaans authored
Now that the bonding device is no longer used in determining the device to which to send packets, it can be dropped from the argument list of the various xmit_hash_policy calls. Signed-off-by:
Jasper Spaans <spaans@fox-it.com> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Jay Vosburgh <fubar@us.ibm.com> Signed-off-by:
-
David S. Miller authored
Conflicts: drivers/net/sh_eth.c
-
Eric Dumazet authored
We currently use a 16 bit field (vlan_tci) to store VLAN ID/PRIO on a skb. Null value is used as a special value, meaning vlan tagging not enabled. This forbids use of null vlan ID. As pointed by David, some drivers use the 3 high order bits (PRIO) As VLAN ID is 12 bits, we can use the remaining bit (CFI) as a flag, and allow null VLAN ID. In case future code really wants to use VLAN_CFI_MASK, we'll have to use a bit outside of vlan_tci. #define VLAN_PRIO_MASK 0xe000 /* Priority Code Point */ #define VLAN_PRIO_SHIFT 13 #define VLAN_CFI_MASK 0x1000 /* Canonical Format Indicator */ #define VLAN_TAG_PRESENT VLAN_CFI_MASK #define VLAN_VID_MASK 0x0fff /* VLAN Identifier */ Reported-by:
Gertjan Hofman <gertjan_hofman@yahoo.com> Signed-off-by:
-
Kurt Van Dijck authored
Commit 7b6856a0 "can: provide library functions for skb allocation" did not properly remove two lines of the SJA1000 driver resulting in a 'skb_over_panic' when calling skb_put, as reported by Kurt. Signed-off-by:
Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
-
Krishna Kumar authored
Set the rxq# for LRO when processing the last fragment of a frame. This helps in fast txq selection for routing workloads. Signed-off-by:
Krishna Kumar <krkumar2@in.ibm.com> Acked-by:
Divy Le Ray <divy@chelsio.com> Signed-off-by:
-
Nobuhiro Iwamatsu authored
Add include asm/cacheflush.h, because declaration of __flush_purge_region moved to asm/cacheflush.h. Signed-off-by:
Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by:
-
- 26 Oct, 2009 9 commits
-
-
Michal Ostrowski authored
Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by:
Michal Ostrowski <mostrows@gmail.com> Reviewed-by:
Cyril Gorcunov <gorcunov@gmail.com> Reported-by:
Denys Fedoryschenko <denys@visp.net.lb> Tested-by:
-
Bruce Allan authored
PCH-based parts (82577/82578) and some ICH8-based parts (82566) need to hold the swflag (sw/fw/hw hardware semaphore) over consecutive PHY accesses in order to perform sw-driven PHY configuration during initialization to workaround known hardware issues (see follow-on patch). This patch provides new PHY read/write functions (and function pointers) that will allow accessing the PHY registers assuming the swflag has already been acquired. The actual PHY register access code has moved into helper functions that are called with a flag indicating whether or not the swflag has already been acquired and acquires/releases it if not. The functions called from within the updated PHY access functions had to be updated to assume the swflag was already acquired, and other functions that called those functions were also updated to acquire/release the swflag. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Signed-off-by:
-
Bruce Allan authored
Accesses to NVM and PHY/CSR registers on ICHx/PCH-based parts are protected from concurrent accesses with a mutex that is acquired when the access is initiated and released when the access has completed. However, the two types of accesses should not be protected by the same mutex because the driver may have to access the NVM while already holding the mutex over several consecutive PHY/CSR accesses which would result in livelock. Signed-off-by:
-
Bruce Allan authored
Unlike previous ICHx-based parts, the PCH-based parts (82577/82578) require LPLU (Low Power Link Up, or "reverse auto-negotiation") to be configured in the PHY rather than the MAC. Signed-off-by:
-
Bruce Allan authored
In some conditions (e.g. when AMT is enabled on the system), it is possible to take an extended period of time to for the driver to acquire the sw/fw/hw hardware semaphore used to protect against concurrent access of a shared resource (e.g. PHY registers). This could cause PHY registers to not get configured properly resulting in link issues. Signed-off-by:
-
Bruce Allan authored
Performing a dummy read of the PHY Wakeup Control (WUC) register clears the wakeup enable bit set by an PHY reset. If this bit remains set, link problems may occur. Signed-off-by:
-
Alexander Duyck authored
This patch resolves a memory leak which occurs while changing the ring size while the interface is down. Signed-off-by:
-
Alexander Duyck authored
This patch resolves a memory leak that occurs when you resize the rings via the ethtool -G option while the interface is down. Signed-off-by:
-
Alexander Duyck authored
Changing ring sizes while the interface was down was causing a double allocation of the receive and transmit rings. This issue is amplified when there are multiple rings enabled. To prevent this we need to add an additional check which will just update the ring counts when the interface is not up and skip the allocation steps. Signed-off-by:
-
- 24 Oct, 2009 9 commits
-
-
Jasper Spaans authored
Modify bonding hash transmit policies to use the psource MAC address of the packet instead of the MAC address configured for the bonding device. The old sitation conflicts with the documentation. Signed-off-by:
-
Eric Dumazet authored
While playing with pktgen, I realized IP ID was not filled and a random value was taken, possibly leaking 2 bytes of kernel memory. We can use an increasing ID, this can help diagnostics anyway. Also clear packet payload, instead of leaking kernel memory. Signed-off-by:
-
Ben Dooks authored
The DM9000B revision ID is 0x1A, not 0x1B as set in the curernt dm9000.h header. Fix bug reported by Paolo Zebelloni. Signed-off-by:
Ben Dooks <ben@simtec.co.uk> Signed-off-by:
Simtec Linux Team <linux@simtec.co.uk> Signed-off-by:
-
Simon Wunderlich authored
The 8110SC rev d chip on our board shows a regression which the 8110SB chip did not have. When inbound traffic is overflowing the receive descriptor queue, "holes" in the ring buffer may occur which lead to a hangup until the buffer is filled again. The packets are than completely processed, but the ring remains porous and no packets are processed until the next overflow. Setting the interface down and up can fix the problem temporary from userspace. For some reason we don't know, this behaviour is not occuring if the RxVlan bit for hardware VLAN untagging is set. There is another "Work around for AMD plateform" in the current code which checks the VLAN status word in receive descriptors, but does never come to effect when hardware VLAN support is enabled. We assume that this is a bug in the chip. The following patch fixes the problem. Without the patch we could reproduce the hang within minutes (given other devices also generating lots of interrupts), without we couldn't reproduce within a few days of long term testing. This version contains minor style adjustments and is sent with mutt which will hopefully not destroy the formatting again. Signed-off-by:
Bernhard Schmidt <bernhard.schmidt@saxnet.de> Signed-off-by:
Simon Wunderlich <simon.wunderlich@saxnet.de> Acked-by:
Francois Romieu <romieu@zoreil.com> Signed-off-by:
-
Eric Dumazet authored
When handling large number of netdevice, rtnl_dump_ifinfo() is very slow because it has O(N^2) complexity. Instead of scanning one single list, we can use the 256 sub lists of the dev_index hash table. This considerably speedups "ip link" operations Signed-off-by:
-
Eric Dumazet authored
GRE tunnels use one rwlock to protect their hash tables. This locking scheme can be converted to RCU for free, since netdevice already must wait for a RCU grace period at dismantle time. Signed-off-by:
-
Eric Dumazet authored
ip6_tunnels use one rwlock to protect their hash tables. This locking scheme can be converted to RCU for free, since netdevice already must wait for a RCU grace period at dismantle time. Signed-off-by:
-
Eric Dumazet authored
IPIP tunnels use one rwlock to protect their hash tables. This locking scheme can be converted to RCU for free, since netdevice already must wait for a RCU grace period at dismantle time. Signed-off-by:
-
Eric Dumazet authored
xfrm6_tunnels use one rwlock to protect their hash tables. Plain and straightforward conversion to RCU locking to permit better SMP performance. Signed-off-by:
-
