- 30 Sep, 2020 1 commit
-
-
Peter Collingbourne authored
Also partially revert the follow-up change "drm: pl111: Absorb the external register header". This reverts the parts of commits 7e4e589d and 0fb81256 that touch paths outside of drivers/gpu/drm/pl111. The fbdev driver is used by Android's FVP configuration. Using the DRM driver together with DRM's fbdev emulation results in a failure to boot Android. The root cause is that Android's generic fbdev userspace driver relies on the ability to set the pixel format via FBIOPUT_VSCREENINFO, which is not supported by fbdev emulation. There have been other less critical behavioral differences identified between the fbdev driver and the DRM driver with fbdev emulation. The DRM driver exposes different values for the panel's width, height and refresh rate, and the DRM driver fails a FBIOPUT_VSCREENINFO syscall with yres_virtual greater than the maximum supported value instead of letting the syscall succeed and setting yres_virtual based on yres. Signed-off-by: Peter Collingbourne <pcc@google.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200929195344.2219796-1-pcc@google.com
-
- 25 Sep, 2020 3 commits
-
-
Peilin Ye authored
fbcon_get_font() is reading out-of-bounds. A malicious user may resize `vc->vc_font.height` to a large value, causing fbcon_get_font() to read out of `fontdata`. fbcon_get_font() handles both built-in and user-provided fonts. Fortunately, recently we have added FONT_EXTRA_WORDS support for built-in fonts, so fix it by adding range checks using FNTSIZE(). This patch depends on patch "fbdev, newport_con: Move FONT_EXTRA_WORDS macros into linux/font.h", and patch "Fonts: Support FONT_EXTRA_WORDS macros for built-in fonts". Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+29d4ed7f3bdedf2aa2fd@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=08b8be45afea11888776f897895aef9ad1c3ecfdSigned-off-by: Peilin Ye <yepeilin.cs@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/b34544687a1a09d6de630659eb7a773f4953238b.1600953813.git.yepeilin.cs@gmail.com
-
Peilin Ye authored
syzbot has reported an issue in the framebuffer layer, where a malicious user may overflow our built-in font data buffers. In order to perform a reliable range check, subsystems need to know `FONTDATAMAX` for each built-in font. Unfortunately, our font descriptor, `struct console_font` does not contain `FONTDATAMAX`, and is part of the UAPI, making it infeasible to modify it. For user-provided fonts, the framebuffer layer resolves this issue by reserving four extra words at the beginning of data buffers. Later, whenever a function needs to access them, it simply uses the following macros: Recently we have gathered all the above macros to <linux/font.h>. Let us do the same thing for built-in fonts, prepend four extra words (including `FONTDATAMAX`) to their data buffers, so that subsystems can use these macros for all fonts, no matter built-in or user-provided. This patch depends on patch "fbdev, newport_con: Move FONT_EXTRA_WORDS macros into linux/font.h". Cc: stable@vger.kernel.org Link: https://syzkaller.appspot.com/bug?id=08b8be45afea11888776f897895aef9ad1c3ecfdSigned-off-by: Peilin Ye <yepeilin.cs@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/ef18af00c35fb3cc826048a5f70924ed6ddce95b.1600953813.git.yepeilin.cs@gmail.com
-
Peilin Ye authored
drivers/video/console/newport_con.c is borrowing FONT_EXTRA_WORDS macros from drivers/video/fbdev/core/fbcon.h. To keep things simple, move all definitions into <linux/font.h>. Since newport_con now uses four extra words, initialize the fourth word in newport_set_font() properly. Cc: stable@vger.kernel.org Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/7fb8bc9b0abc676ada6b7ac0e0bd443499357267.1600953813.git.yepeilin.cs@gmail.com
-
- 21 Sep, 2020 1 commit
-
-
Charan Teja Reddy authored
NULL pointer dereference is observed while exporting the dmabuf but failed to allocate the 'struct file' which results into the dropping of the allocated dentry corresponding to this file in the dmabuf fs, which is ending up in dma_buf_release() and accessing the uninitialzed dentry->d_fsdata. Call stack on 5.4 is below: dma_buf_release+0x2c/0x254 drivers/dma-buf/dma-buf.c:88 __dentry_kill+0x294/0x31c fs/dcache.c:584 dentry_kill fs/dcache.c:673 [inline] dput+0x250/0x380 fs/dcache.c:859 path_put+0x24/0x40 fs/namei.c:485 alloc_file_pseudo+0x1a4/0x200 fs/file_table.c:235 dma_buf_getfile drivers/dma-buf/dma-buf.c:473 [inline] dma_buf_export+0x25c/0x3ec drivers/dma-buf/dma-buf.c:585 Fix this by checking for the valid pointer in the dentry->d_fsdata. Fixes: 4ab59c3c ("dma-buf: Move dma_buf_release() from fops to dentry_ops") Cc: <stable@vger.kernel.org> [5.7+] Signed-off-by: Charan Teja Reddy <charante@codeaurora.org> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/391319/Signed-off-by: Christian König <christian.koenig@amd.com>
-
- 10 Sep, 2020 2 commits
-
-
Martin Cerveny authored
Better guess. Secondary CSC registers are from 0xF0000. Signed-off-by: Martin Cerveny <m.cerveny@computer.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200906162140.5584-3-m.cerveny@computer.org
-
Martin Cerveny authored
"Allwinner V3s" has secondary video layer (VI). Decoded video is displayed in wrong colors until secondary CSC registers are programmed correctly. Fixes: 88302939 ("drm/sun4i: Add DE2 CSC library") Signed-off-by: Martin Cerveny <m.cerveny@computer.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200906162140.5584-2-m.cerveny@computer.org
-
- 09 Sep, 2020 1 commit
-
-
Marek Szyprowski authored
card->owner is a required property and since commit 81033c6b ("ALSA: core: Warn on empty module") a warning is issued if it is empty. Fix lack of it. This fixes following warning observed on RaspberryPi 3B board with ARM 32bit kernel and multi_v7_defconfig: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 210 at sound/core/init.c:207 snd_card_new+0x378/0x398 [snd] Modules linked in: vc4(+) snd_soc_core ac97_bus snd_pcm_dmaengine bluetooth snd_pcm snd_timer crc32_arm_ce raspberrypi_hwmon snd soundcore ecdh_generic ecc bcm2835_thermal phy_generic CPU: 1 PID: 210 Comm: systemd-udevd Not tainted 5.8.0-rc1-00027-g81033c6b #1087 Hardware name: BCM2835 [<c03113c0>] (unwind_backtrace) from [<c030bcb4>] (show_stack+0x10/0x14) [<c030bcb4>] (show_stack) from [<c071cef8>] (dump_stack+0xd4/0xe8) [<c071cef8>] (dump_stack) from [<c0345bfc>] (__warn+0xdc/0xf4) [<c0345bfc>] (__warn) from [<c0345cc4>] (warn_slowpath_fmt+0xb0/0xb8) [<c0345cc4>] (warn_slowpath_fmt) from [<bf02ff74>] (snd_card_new+0x378/0x398 [snd]) [<bf02ff74>] (snd_card_new [snd]) from [<bf11f0b4>] (snd_soc_bind_card+0x280/0x99c [snd_soc_core]) [<bf11f0b4>] (snd_soc_bind_card [snd_soc_core]) from [<bf12f000>] (devm_snd_soc_register_card+0x34/0x6c [snd_soc_core]) [<bf12f000>] (devm_snd_soc_register_card [snd_soc_core]) from [<bf165654>] (vc4_hdmi_bind+0x43c/0x5f4 [vc4]) [<bf165654>] (vc4_hdmi_bind [vc4]) from [<c09d660c>] (component_bind_all+0xec/0x24c) [<c09d660c>] (component_bind_all) from [<bf15c44c>] (vc4_drm_bind+0xd4/0x174 [vc4]) [<bf15c44c>] (vc4_drm_bind [vc4]) from [<c09d6ac0>] (try_to_bring_up_master+0x160/0x1b0) [<c09d6ac0>] (try_to_bring_up_master) from [<c09d6f38>] (component_master_add_with_match+0xd0/0x104) [<c09d6f38>] (component_master_add_with_match) from [<bf15c588>] (vc4_platform_drm_probe+0x9c/0xbc [vc4]) [<bf15c588>] (vc4_platform_drm_probe [vc4]) from [<c09df740>] (platform_drv_probe+0x6c/0xa4) [<c09df740>] (platform_drv_probe) from [<c09dd6f0>] (really_probe+0x210/0x350) [<c09dd6f0>] (really_probe) from [<c09dd940>] (driver_probe_device+0x5c/0xb4) [<c09dd940>] (driver_probe_device) from [<c09ddb38>] (device_driver_attach+0x58/0x60) [<c09ddb38>] (device_driver_attach) from [<c09ddbc0>] (__driver_attach+0x80/0xbc) [<c09ddbc0>] (__driver_attach) from [<c09db820>] (bus_for_each_dev+0x68/0xb4) [<c09db820>] (bus_for_each_dev) from [<c09dc9f8>] (bus_add_driver+0x130/0x1e8) [<c09dc9f8>] (bus_add_driver) from [<c09de648>] (driver_register+0x78/0x110) [<c09de648>] (driver_register) from [<c0302038>] (do_one_initcall+0x50/0x220) [<c0302038>] (do_one_initcall) from [<c03db544>] (do_init_module+0x60/0x210) [<c03db544>] (do_init_module) from [<c03da4f8>] (load_module+0x1e34/0x2338) [<c03da4f8>] (load_module) from [<c03dac00>] (sys_finit_module+0xac/0xbc) [<c03dac00>] (sys_finit_module) from [<c03000c0>] (ret_fast_syscall+0x0/0x54) Exception stack(0xeded9fa8 to 0xeded9ff0) ... ---[ end trace 6414689569c2bc08 ]--- Fixes: bb7d7856 ("drm/vc4: Add HDMI audio support") Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200701073949.28941-1-m.szyprowski@samsung.com
-
- 04 Sep, 2020 4 commits
-
-
Gerd Hoffmann authored
Not needed, already tracked by drm_crtc_state->active. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20200818072511.6745-3-kraxel@redhat.com (cherry picked from commit 1174c8a0)
-
Maxime Ripard authored
Unlike we previously thought, the per-pixel alpha is just as broken on the A20 as it is on the A10. Remove the quirk that says we can use it. Fixes: dcf496a6 ("drm/sun4i: sun4i: Introduce a quirk for lowest plane alpha support") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200728134810.883457-2-maxime@cerno.tech
-
Maxime Ripard authored
Unlike what we previously thought, only the per-pixel alpha is broken on the lowest plane and the per-plane alpha isn't. Remove the check on the alpha property being set on the lowest plane to reject a mode. Fixes: dcf496a6 ("drm/sun4i: sun4i: Introduce a quirk for lowest plane alpha support") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200728134810.883457-1-maxime@cerno.tech
-
Jernej Skrabec authored
Function sun8i_vi_layer_get_csc_mode() is supposed to return CSC mode but due to inproper return type (bool instead of u32) it returns just 0 or 1. Colors are wrong for YVU formats because of that. Fixes: daab3d0e ("drm/sun4i: de2: csc_mode in de2 format struct is mostly redundant") Reported-by: Roman Stratiienko <r.stratiienko@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Roman Stratiienko <r.stratiienko@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200901220305.6809-1-jernej.skrabec@siol.net
-
- 03 Sep, 2020 3 commits
-
-
Linus Walleij authored
The TVE200 will occasionally print a bunch of lost interrupts and similar dmesg messages, sometimes during boot and sometimes after disabling and coming back to enablement. This is probably because the hardware is left in an unknown state by the boot loader that displays a logo. This can be fixed by bringing the controller into a known state by resetting the controller while enabling it. We retry reset 5 times like the vendor driver does. We also put the controller into reset before de-clocking it and clear all interrupts before enabling the vblank IRQ. This makes the video enable/disable/enable cycle rock solid on the D-Link DIR-685. Tested extensively. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200820203144.271081-1-linus.walleij@linaro.org
-
Krzysztof Kozlowski authored
Fix W=1 compile warnings (invalid kerneldoc): drivers/dma-buf/dma-fence-chain.c:233: warning: Function parameter or member 'seqno' not described in 'dma_fence_chain_init' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200819175134.19261-2-krzk@kernel.org
-
Krzysztof Kozlowski authored
Fix W=1 compile warnings (invalid kerneldoc): drivers/dma-buf/dma-buf.c:328: warning: Function parameter or member 'dmabuf' not described in 'dma_buf_set_name' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200819175134.19261-1-krzk@kernel.org
-
- 02 Sep, 2020 1 commit
-
-
Gerd Hoffmann authored
When going through a disable/enable cycle without changing the framebuffer the optimization added by commit 3954ff10 ("drm/virtio: skip set_scanout if framebuffer didn't change") causes the screen stay blank. Add a bool to force an update to fix that. v2: use drm_atomic_crtc_needs_modeset() (Daniel). Cc: 1882851@bugs.launchpad.net Fixes: 3954ff10 ("drm/virtio: skip set_scanout if framebuffer didn't change") Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Jiri Slaby <jirislaby@kernel.org> Tested-by: Diego Viola <diego.viola@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20200818072511.6745-2-kraxel@redhat.com (cherry picked from commit 1bc371cd)
-
- 01 Sep, 2020 1 commit
-
-
Randy Dunlap authored
/home/rdunlap/lnx/lnx-59-rc2/Documentation/driver-api/dma-buf.rst:182: WARNING: Title underline too short. Indefinite DMA Fences ~~~~~~~~~~~~~~~~~~~~ Fixes: 72b6ede7 ("dma-buf.rst: Document why indefinite fences are a bad idea") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1b22d4c3-4ea5-c633-9e35-71ce65d8dbcc@infradead.org
-
- 31 Aug, 2020 1 commit
-
-
Ondrej Jirman authored
It's writing too much data. regmap_bulk_write expects number of register sized chunks to write, not a byte sized length of the bounce buffer. Bounce buffer needs to be padded too, so that regmap_bulk_write will not read past the end of the buffer. Fixes: 133add5b ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support") Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200828125032.937148-1-megous@megous.com
-
- 30 Aug, 2020 2 commits
-
-
Paul Cercueil authored
Even if support for the IPU was compiled in, we may run on a device (e.g. the Qi LB60) where the IPU is not available, or simply with an old devicetree without the IPU node. In that case the ingenic-drm refused to probe. Fix the driver so that it will probe even if the IPU node is not present in devicetree (but then IPU support is disabled of course). v2: Take a different approach Fixes: fc1acf31 ("drm/ingenic: Add support for the IPU") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200827114404.36748-2-paul@crapouillou.net
-
Paul Cercueil authored
of_graph_get_remote_node() requires of_node_put() to be called on the device_node pointer when it's no more in use. Fixes: fc1acf31 ("drm/ingenic: Add support for the IPU") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200827114404.36748-1-paul@crapouillou.net
-
- 27 Aug, 2020 1 commit
-
-
Yu Kuai authored
If sun8i_r40_tcon_tv_set_mux() succeed, sun8i_r40_tcon_tv_set_mux() doesn't have a corresponding put_device(). Thus add put_device() to fix the exception handling for this function implementation. Fixes: 0305189a ("drm/sun4i: tcon: Add support for R40 TCON") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200826010826.1785487-1-yukuai3@huawei.com
-
- 26 Aug, 2020 1 commit
-
-
Gurchetan Singh authored
This reverts commit d323bb44. Fixes a double-free regression: [ 4.357928] drm_gem_shmem_free_object+0xb4/0x100 [ 4.358983] virtio_gpu_dequeue_ctrl_func+0xd9/0x290 [ 4.360343] process_one_work+0x1d2/0x3a0 [ 4.361581] worker_thread+0x45/0x3c0 [ 4.362645] kthread+0xf6/0x130 [ 4.363543] ? process_one_work+0x3a0/0x3a0 [ 4.364770] ? kthread_park+0x80/0x80 [ 4.365799] ret_from_fork+0x35/0x40 [ 4.367103] Modules linked in: [ 4.367958] CR2: 0000000000000018 [ 4.368857] ---[ end trace db84f7a2974d5c79 ]--- [ 4.370118] RIP: 0010:dma_direct_unmap_sg+0x1f/0x60 In addition, virtio has it's own set of dma-ops so there's not an obviously clean way to transition to shmem helpers. Fixes: d323bb44 ("drm/virtio: Call the right shmem helpers") Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200615230500.551-1-gurchetansingh@chromium.orgSigned-off-by: Gerd Hoffmann <kraxel@redhat.com> (cherry picked from commit 51c3b0cc)
-
- 25 Aug, 2020 2 commits
-
-
Tomi Valkeinen authored
After commit 92cc68e3 ("drm/vblank: Use spin_(un)lock_irq() in drm_crtc_vblank_on()") omapdrm locking is broken: WARNING: inconsistent lock state 5.8.0-rc2-00483-g92cc68e3 #13 Tainted: G W -------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. swapper/0/0 [HC1[1]:SC0[0]:HE0:SE1] takes: ea98222c (&dev->event_lock#2){?.+.}-{2:2}, at: drm_handle_vblank+0x4c/0x520 [drm] {HARDIRQ-ON-W} state was registered at: trace_hardirqs_on+0x9c/0x1ec _raw_spin_unlock_irq+0x20/0x58 omap_crtc_atomic_enable+0x54/0xa0 [omapdrm] drm_atomic_helper_commit_modeset_enables+0x218/0x270 [drm_kms_helper] omap_atomic_commit_tail+0x48/0xc4 [omapdrm] commit_tail+0x9c/0x190 [drm_kms_helper] drm_atomic_helper_commit+0x154/0x188 [drm_kms_helper] drm_client_modeset_commit_atomic+0x228/0x268 [drm] drm_client_modeset_commit_locked+0x60/0x1d0 [drm] drm_client_modeset_commit+0x24/0x40 [drm] drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa8 [drm_kms_helper] drm_fb_helper_set_par+0x2c/0x5c [drm_kms_helper] drm_fb_helper_hotplug_event.part.0+0xa0/0xbc [drm_kms_helper] drm_kms_helper_hotplug_event+0x24/0x30 [drm_kms_helper] output_poll_execute+0x1a8/0x1c0 [drm_kms_helper] process_one_work+0x268/0x800 worker_thread+0x30/0x4e0 kthread+0x164/0x190 ret_from_fork+0x14/0x20 The reason for this is that omapdrm calls drm_crtc_vblank_on() while holding event_lock taken with spin_lock_irq(). It is not clear why drm_crtc_vblank_on() and drm_crtc_vblank_get() are called while holding event_lock. I don't see any problem with moving those calls outside the lock, which is what this patch does. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819103021.440288-1-tomi.valkeinen@ti.comReviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
Maarten Lankhorst authored
Backmerge requested by Tomi for a fix to omap inconsistent locking state issue, and because we need at least v5.9-rc2 now. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
- 23 Aug, 2020 9 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Add perf support for emitting extended registers for power10. - A fix for CPU hotplug on pseries, where on large/loaded systems we may not wait long enough for the CPU to be offlined, leading to crashes. - Addition of a raw cputable entry for Power10, which is not required to boot, but is required to make our PMU setup work correctly in guests. - Three fixes for the recent changes on 32-bit Book3S to move modules into their own segment for strict RWX. - A fix for a recent change in our powernv PCI code that could lead to crashes. - A change to our perf interrupt accounting to avoid soft lockups when using some events, found by syzkaller. - A change in the way we handle power loss events from the hypervisor on pseries. We no longer immediately shut down if we're told we're running on a UPS. - A few other minor fixes. Thanks to Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz, Kajol Jain, Madhavan Srinivasan, Michael Neuling, Michael Roth, Nageswara R Sastry, Oliver O'Halloran, Thiago Jung Bauermann, Vaidyanathan Srinivasan, Vasant Hegde. * tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000 powerpc/pseries: Do not initiate shutdown when system is running on UPS powerpc/perf: Fix soft lockups due to missed interrupt accounting powerpc/powernv/pci: Fix possible crash when releasing DMA resources powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU death powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32 powerpc/fixmap: Fix the size of the early debug area powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabled powerpc/kernel: Cleanup machine check function declarations powerpc: Add POWER10 raw mode cputable entry powerpc/perf: Add extended regs support for power10 platform powerpc/perf: Add support for outputting extended regs in perf intr_regs powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Thomas Gleixner: "A single fix for x86 which removes the RDPID usage from the paranoid entry path and unconditionally uses LSL to retrieve the CPU number. RDPID depends on MSR_TSX_AUX. KVM has an optmization to avoid expensive MRS read/writes on VMENTER/EXIT. It caches the MSR values and restores them either when leaving the run loop, on preemption or when going out to user space. MSR_TSX_AUX is part of that lazy MSR set, so after writing the guest value and before the lazy restore any exception using the paranoid entry will read the guest value and use it as CPU number to retrieve the GSBASE value for the current CPU when FSGSBASE is enabled. As RDPID is only used in that particular entry path, there is no reason to burden VMENTER/EXIT with two extra MSR writes. Remove the RDPID optimization, which is not even backed by numbers from the paranoid entry path instead" * tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 perf fix from Thomas Gleixner: "A single update for perf on x86 which has support for the broken down bandwith counters" * tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Add BW counters for GT, IA and IO breakdown
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fixes from Thomas Gleixner: - Enforce NX on RO data in mixed EFI mode - Destroy workqueue in an error handling path to prevent UAF - Stop argument parser at '--' which is the delimiter for init - Treat a NULL command line pointer as empty instead of dereferncing it unconditionally. - Handle an unterminated command line correctly - Cleanup the 32bit code leftovers and remove obsolete documentation * tag 'efi-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation: efi: remove description of efi=old_map efi/x86: Move 32-bit code into efi_32.c efi/libstub: Handle unterminated cmdline efi/libstub: Handle NULL cmdline efi/libstub: Stop parsing arguments at "--" efi: add missed destroy_workqueue when efisubsys_init fails efi/x86: Mark kernel rodata non-executable for mixed mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull entry fix from Thomas Gleixner: "A single bug fix for the common entry code. The transcription of the x86 version messed up the reload of the syscall number from pt_regs after ptrace and seccomp which breaks syscall number rewriting" * tag 'core-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: core/entry: Respect syscall number rewrites
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC fix from Borislav Petkov: "A single fix correcting a reversed error severity determination check which lead to a recoverable error getting marked as fatal, by Tony Luck" * tag 'edac_urgent_for_v5.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/{i7core,sb,pnd2,skx}: Fix error event severity
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: "Nothing earth shattering here, lots of small fixes (f.e. missing RCU protection, bad ref counting, missing memset(), etc.) all over the place: 1) Use get_file_rcu() in task_file iterator, from Yonghong Song. 2) There are two ways to set remote source MAC addresses in macvlan driver, but only one of which validates things properly. Fix this. From Alvin Šipraga. 3) Missing of_node_put() in gianfar probing, from Sumera Priyadarsini. 4) Preserve device wanted feature bits across multiple netlink ethtool requests, from Maxim Mikityanskiy. 5) Fix rcu_sched stall in task and task_file bpf iterators, from Yonghong Song. 6) Avoid reset after device destroy in ena driver, from Shay Agroskin. 7) Missing memset() in netlink policy export reallocation path, from Johannes Berg. 8) Fix info leak in __smc_diag_dump(), from Peilin Ye. 9) Decapsulate ECN properly for ipv6 in ipv4 tunnels, from Mark Tomlinson. 10) Fix number of data stream negotiation in SCTP, from David Laight. 11) Fix double free in connection tracker action module, from Alaa Hleihel. 12) Don't allow empty NHA_GROUP attributes, from Nikolay Aleksandrov" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits) net: nexthop: don't allow empty NHA_GROUP bpf: Fix two typos in uapi/linux/bpf.h net: dsa: b53: check for timeout tipc: call rcu_read_lock() in tipc_aead_encrypt_done() net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow net: sctp: Fix negotiation of the number of data streams. dt-bindings: net: renesas, ether: Improve schema validation gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit() hv_netvsc: Remove "unlikely" from netvsc_select_queue bpf: selftests: global_funcs: Check err_str before strstr bpf: xdp: Fix XDP mode when no mode flags specified selftests/bpf: Remove test_align leftovers tools/resolve_btfids: Fix sections with wrong alignment net/smc: Prevent kernel-infoleak in __smc_diag_dump() sfc: fix build warnings on 32-bit net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified" libbpf: Fix map index used in error message net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe() net: atlantic: Use readx_poll_timeout() for large timeout ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull epoll fixes from Al Viro: "Fix reference counting and clean up exit paths" * 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: do_epoll_ctl(): clean the failure exits up a bit epoll: Keep a reference on files added to the check list
-
- 22 Aug, 2020 7 commits
-
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Marc Zyngier authored
When adding a new fd to an epoll, and that this new fd is an epoll fd itself, we recursively scan the fds attached to it to detect cycles, and add non-epool files to a "check list" that gets subsequently parsed. However, this check list isn't completely safe when deletions can happen concurrently. To sidestep the issue, make sure that a struct file placed on the check list sees its f_count increased, ensuring that a concurrent deletion won't result in the file disapearing from under our feet. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Nikolay Aleksandrov authored
Currently the nexthop code will use an empty NHA_GROUP attribute, but it requires at least 1 entry in order to function properly. Otherwise we end up derefencing null or random pointers all over the place due to not having any nh_grp_entry members allocated, nexthop code relies on having at least the first member present. Empty NHA_GROUP doesn't make any sense so just disallow it. Also add a WARN_ON for any future users of nexthop_create_group(). BUG: kernel NULL pointer dereference, address: 0000000000000080 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 0 PID: 558 Comm: ip Not tainted 5.9.0-rc1+ #93 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 RIP: 0010:fib_check_nexthop+0x4a/0xaa Code: 0f 84 83 00 00 00 48 c7 02 80 03 f7 81 c3 40 80 fe fe 75 12 b8 ea ff ff ff 48 85 d2 74 6b 48 c7 02 40 03 f7 81 c3 48 8b 40 10 <48> 8b 80 80 00 00 00 eb 36 80 78 1a 00 74 12 b8 ea ff ff ff 48 85 RSP: 0018:ffff88807983ba00 EFLAGS: 00010213 RAX: 0000000000000000 RBX: ffff88807983bc00 RCX: 0000000000000000 RDX: ffff88807983bc00 RSI: 0000000000000000 RDI: ffff88807bdd0a80 RBP: ffff88807983baf8 R08: 0000000000000dc0 R09: 000000000000040a R10: 0000000000000000 R11: ffff88807bdd0ae8 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88807bea3100 R15: 0000000000000001 FS: 00007f10db393700(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000080 CR3: 000000007bd0f004 CR4: 00000000003706f0 Call Trace: fib_create_info+0x64d/0xaf7 fib_table_insert+0xf6/0x581 ? __vma_adjust+0x3b6/0x4d4 inet_rtm_newroute+0x56/0x70 rtnetlink_rcv_msg+0x1e3/0x20d ? rtnl_calcit.isra.0+0xb8/0xb8 netlink_rcv_skb+0x5b/0xac netlink_unicast+0xfa/0x17b netlink_sendmsg+0x334/0x353 sock_sendmsg_nosec+0xf/0x3f ____sys_sendmsg+0x1a0/0x1fc ? copy_msghdr_from_user+0x4c/0x61 ___sys_sendmsg+0x63/0x84 ? handle_mm_fault+0xa39/0x11b5 ? sockfd_lookup_light+0x72/0x9a __sys_sendmsg+0x50/0x6e do_syscall_64+0x54/0xbe entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f10dacc0bb7 Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 8b 05 9a 4b 2b 00 85 c0 75 2e 48 63 ff 48 63 d2 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 01 c3 48 8b 15 b1 f2 2a 00 f7 d8 64 89 02 48 RSP: 002b:00007ffcbe628bf8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffcbe628f80 RCX: 00007f10dacc0bb7 RDX: 0000000000000000 RSI: 00007ffcbe628c60 RDI: 0000000000000003 RBP: 000000005f41099c R08: 0000000000000001 R09: 0000000000000008 R10: 00000000000005e9 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007ffcbe628d70 R15: 0000563a86c6e440 Modules linked in: CR2: 0000000000000080 CC: David Ahern <dsahern@gmail.com> Fixes: 430a0491 ("nexthop: Add support for nexthop groups") Reported-by: syzbot+a61aa19b0c14c8770bd9@syzkaller.appspotmail.com Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - move -Wsign-compare warning from W=2 to W=3 - fix the keyword _restrict to __restrict in genksyms - fix more bugs in qconf * tag 'kbuild-fixes-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: qconf: replace deprecated QString::sprintf() with QTextStream kconfig: qconf: remove redundant help in the info view kconfig: qconf: remove qInfo() to get back Qt4 support kconfig: qconf: remove unused colNr kconfig: qconf: fix the popup menu in the ConfigInfoView window kconfig: qconf: fix signal connection to invalid slots genksyms: keywords: Use __restrict not _restrict kbuild: remove redundant patterns in filter/filter-out extract-cert: add static to local data Makefile.extrawarn: Move sign-compare from W=2 to W=3
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - Allow booting of late secondary CPUs affected by erratum 1418040 (currently they are parked if none of the early CPUs are affected by this erratum). - Add the 32-bit vdso Makefile to the vdso_install rule so that 'make vdso_install' installs the 32-bit compat vdso when it is compiled. - Print a warning that untrusted guests without a CPU erratum workaround (Cortex-A57 832075) may deadlock the affected system. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: ARM64: vdso32: Install vdso32 from vdso_install KVM: arm64: Print warning when cpu erratum can cause guests to deadlock arm64: Allow booting of late CPUs affected by erratum 1418040 arm64: Move handling of erratum 1418040 into C code
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Vasily Gorbik: - a couple of fixes for storage key handling relevant for debugging - add cond_resched into potentially slow subchannels scanning loop - fixes for PF/VF linking and to ignore stale PCI configuration request events * tag 's390-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: fix PF/VF linking on hot plug s390/pci: re-introduce zpci_remove_device() s390/pci: fix zpci_bus_link_virtfn() s390/ptrace: fix storage key handling s390/runtime_instrumentation: fix storage key handling s390/pci: ignore stale configuration request event s390/cio: add cond_resched() in the slow_eval_known_fn() loop
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: - PAE and PKU bugfixes for x86 - selftests fix for new binutils - MMU notifier fix for arm64 * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set KVM: Pass MMU notifier range flags to kvm_unmap_hva_range() kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode KVM: x86: fix access code passed to gva_to_gpa selftests: kvm: Use a shorter encoding to clear RAX
-