An error occurred fetching the project authors.
- 14 Sep, 2011 1 commit
-
-
Paul Walmsley authored
In preparation for OMAP_CHIP() removal, split pwrdm_init() into three functions. This allows some of them to be called multiple times: for example, pwrdm_register_pwrdms() can be called once to register powerdomains that are common to a group of SoCs, and once to register powerdomains that are specific to a single SoC. The appropriate order to call these functions - which is enforced by the code - is: 1. pwrdm_register_platform_funcs() 2. pwrdm_register_pwrdms() (can be called multiple times) 3. pwrdm_complete_init() Convert the OMAP2, 3, and 4 powerdomain init code to use these new functions. While here, improve documentation, and increase CodingStyle conformance by shortening some local variable names. Signed-off-by: Paul Walmsley <paul@pwsan.com>
-
- 31 Mar, 2011 1 commit
-
-
Lucas De Marchi authored
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 08 Mar, 2011 1 commit
-
-
Paul Walmsley authored
The bank power state bitfields in the powerdomain data are encoded incorrectly. These fields are intended to be bitfields, representing a set of power states that the memory banks support. However, when only one power state was supported by a given bank, the field was incorrectly set to the bit shift -- not the mask. While here, update some file copyrights. The OMAP4 autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
-
- 22 Dec, 2010 3 commits
-
-
Paul Walmsley authored
The OMAP powerdomain code and data is all OMAP2+-specific. This seems unlikely to change any time soon. Move plat-omap/include/plat/powerdomain.h to mach-omap2/powerdomain.h. The primary point of doing this is to remove the temptation for unrelated upper-layer code to access powerdomain code and data directly. As part of this process, remove the references to powerdomain data from the GPIO "driver" and the OMAP PM no-op layer, both in plat-omap. Change the DSPBridge code to point to the new location for the powerdomain headers. The DSPBridge code should not be including the powerdomain headers; these should be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com>
-
Paul Walmsley authored
In preparation for adding OMAP4-specific PRCM accessor/mutator functions, split the existing OMAP2/3 PRCM code into OMAP2/3-specific files. Most of what was in mach-omap2/{cm,prm}.{c,h} has now been moved into mach-omap2/{cm,prm}2xxx_3xxx.{c,h}, since it was OMAP2xxx/3xxx-specific. This process also requires the #includes in each of these files to be changed to reference the new file name. As part of doing so, add some comments into plat-omap/sram.c and plat-omap/mcbsp.c, which use "sideways includes", to indicate that these users of the PRM/CM includes should not be doing so. Thanks to Felipe Contreras <felipe.contreras@gmail.com> for comments on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Acked-by: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Acked-by: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
-
Paul Walmsley authored
Static data should be declared in .c files, not .h files. It should be possible to #include .h files at any point without creating multiple copies of the same data. We converted the clock data to .c files some time ago. This patch does the same for the powerdomain data. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
-
- 18 Dec, 2010 1 commit
-
-
Jean Pihet authored
Add comments and IDs for the following erratas: - i540: MPU cannot exit from Standby, - i478: Unexpected Cold-Reset is generated when device is coming back from OFF mode Signed-off-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- 04 Aug, 2010 1 commit
-
-
Anand Gadiyar authored
USBTLL Save-and-Restore is broken in 3630 ES1.0. Having it enabled could result in incorrect register restores as the OMAP exits off-mode. This could potentially result in unexpected wakeup events. (Refer 3630 errata ID i579) This is fixed in ES1.1. So disable it for ES1.0s. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- 24 Feb, 2010 1 commit
-
-
Thara Gopinath authored
This patch adds the flag .pwrsts_logic_ret info for the core power domain in the associated powerdomain structure. This flag specifies the states core domain logic can hit in event of the domain entering retention. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
-
- 29 Jan, 2010 1 commit
-
-
Paul Walmsley authored
Convert CONFIG_ARCH_OMAP34XX to CONFIG_ARCH_OMAP3, and CONFIG_ARCH_OMAP24XX to CONFIG_ARCH_OMAP2, in preparation for Tony's multi-OMAP patches. While here, update some copyrights, convert instances of "34xx" to "3xxx" where applicable, and convert preprocessor directives of the form #if defined(CONFIG_ARCH_OMAP2) | defined(CONFIG_ARCH_OMAP3) to #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) for standardization. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
-
- 27 Jan, 2010 1 commit
-
-
Paul Walmsley authored
Move clockdomain wakeup dependency and sleep dependency data structures from the powerdomain layer to the clockdomain layer, where they belong. These dependencies were originally placed in the powerdomain layer due to unclear documentation; however, it is clear now that these dependencies are between clockdomains. For OMAP2/3, this is not such a big problem, but for OMAP4 this needs to be fixed. Thanks to Benoît Cousson <b-cousson@ti.com> for his advice on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
-
- 12 Dec, 2009 1 commit
-
-
Thara Gopinath authored
MPU power domain bank 0 bits are displayed in position of bank 1 in PWRSTS and PREPWRSTS registers. So read them from correct position Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
-
- 11 Nov, 2009 1 commit
-
-
Kalle Jokiniemi authored
The hardware SAVEANDRESTORE mechanism seems to leave USB HOST power domain permanently into active state after one transition from off to active state. Disabling for now. Signed-off-by: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
- 20 Oct, 2009 1 commit
-
-
Tony Lindgren authored
Move the remaining headers under plat-omap/include/mach to plat-omap/include/plat. Also search and replace the files using these headers to include using the right path. This was done with: #!/bin/bash mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" headers=$(cd $mach_dir_old && ls *.h) omap_dirs="arch/arm/*omap*/ \ drivers/video/omap \ sound/soc/omap" other_files="drivers/leds/leds-ams-delta.c \ drivers/mfd/menelaus.c \ drivers/mfd/twl4030-core.c \ drivers/mtd/nand/ams-delta.c" for header in $headers; do old="#include <mach\/$header" new="#include <plat\/$header" for dir in $omap_dirs; do find $dir -type f -name \*.[chS] | \ xargs sed -i "s/$old/$new/" done find drivers/ -type f -name \*omap*.[chS] | \ xargs sed -i "s/$old/$new/" for file in $other_files; do sed -i "s/$old/$new/" $file done done for header in $(ls $mach_dir_old/*.h); do git mv $header $plat_dir_new/ done Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- 23 Feb, 2009 2 commits
-
-
Paul Walmsley authored
Richard Woodruff writes that chip errata prevent USBTLL SAR from working on OMAP3 ES levels before ES3.1: http://marc.info/?l=linux-arm-kernel&m=123319614808833&w=2 Update the OMAP3 powerdomain structures appropriately. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Paul Walmsley authored
Some OMAP3 chip behaviors change in ES levels after ES2. Modify the existing omap_chip flags to add options for ES3.0 and ES3.1. Add a new macro, CHIP_GE_OMAP3430ES2, to cover ES levels from ES2 onwards - a common pattern for OMAP3 features. Update all current users of the omap_chip macros to use this new macro. Also add CHIP_GE_OMAP3430ES3_1 to cover the USBTLL SAR errata case (described and fixed in the following patch) Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 08 Feb, 2009 3 commits
-
-
Paul Walmsley authored
The SGX device on OMAP3 does not support retention, so remove RET from the list of possible SGX power states. Problem debugged by Richard Woodruff <r-woodruff2@ti.com>. Signed-off-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Paul Walmsley authored
Each DPLL exists in its own powerdomain (cf 34xx TRM figure 4-18) and clockdomain; so, create powerdomain and clockdomain structures for them. Mark each DPLL clock as belonging to their respective DPLL clockdomain. cf. 34xx TRM Table 4-27 (among other references). linux-omap source commits are acdb615850b9b4f7d1ab68133a16be8c8c0e7419 and a8798a48f33e9268dcc7f30a4b4a3ce4220fe0c9. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Paul Walmsley authored
Remove usbhost_sar_fclk from the OMAP3 clock framework. The bit that the clock was tweaking doesn't actually enable or disable a clock; it controls whether the hardware will save and restore USBHOST state when the powerdomain changes state. (That happens to coincidentally enable a clock for the duration of the operation, hence the earlier confusion.) In place of the clock, mark the USBHOST powerdomain as supporting hardware save-and-restore functionality. linux-omap source commit is f3ceac86a9d425d101d606d87a5af44afef27179. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 19 Aug, 2008 1 commit
-
-
Paul Walmsley authored
Add OMAP3-specific powerdomains. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-