- 28 Aug, 2015 37 commits
-
-
Samuel Pitoiset authored
These signals and sources have been reverse engineered from CUPTI (Linux). Graphics signals exposed by PerfKit (Windows only) will be added later. I need to reverse engineer them and it's a bit painful. Signed-off-by:
Samuel Pitoiset <samuel.pitoiset@gmail.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Samuel Pitoiset authored
gk104_pm_ctor() is equal to gf100_pm_ctor(). Signed-off-by:
-
Samuel Pitoiset authored
This trivial patch makes thing more consistent since hardware signals names are prefixed by 'pcXX'. Signed-off-by:
-
Samuel Pitoiset authored
This is going to be very useful for GF100+ because each GPC can have its own domain of counters. Signed-off-by:
-
Wei Ni authored
According to the tstate calculation in nvkm_clk_tstate(), the range of tstate is from -(clk->state_nr - 1) to 0, it mean the tstate is negative value. But in nvkm_pstate_work(), it use (clk->state_nr - 1 - clk->tstate) to limit pstate, it's not correct. This patch fix it to use (clk->state_nr - 1 + clk->tstate) to limit pstate. Signed-off-by:
Wei Ni <wni@nvidia.com> Signed-off-by:
-
Samuel Pitoiset authored
Signed-off-by:
-
Samuel Pitoiset authored
Signed-off-by:
-
Samuel Pitoiset authored
These signals and sources have been reverse engineered from CUPTI (Linux). Graphics signals exposed by PerfKit (Windows only) will be added later. I need to reverse engineer them and it's a bit painful. This commit also adds a new class for GF108 and GF117. Signed-off-by:
-
Samuel Pitoiset authored
Signed-off-by:
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Samuel Pitoiset authored
These signals and sources have been reverse engineered from NVIDIA PerfKit (Windows) and CUPTI (Linux), they will be used to build complex hardware events from the userspace. This commit also adds a new class for GT200. Signed-off-by:
-
Samuel Pitoiset authored
Signed-off-by: Samuel Pitoiset <samuel.pitoiset at gmail.com> Signed-off-by: -
Samuel Pitoiset authored
Configuring counters from the userspace require the kernel to handle some logic related to performance counters. Basically, it has to find a free slot to assign a counter, to handle extra counting modes like B4/B6 and it must return and error when it can't configure a counter. In my opinion, the kernel should not handle all of that logic but it should only write the configuration sent by the userspace without checking anything. In other words, it should overwrite the configuration even if it's already counting and do not return any errors. This patch allows the userspace to configure a domain instead of separate counters. This has the advantage to move all of the logic to the userspace. Signed-off-by:
-
Samuel Pitoiset authored
This adds a new method NVIF_PERFCTR_V0_INIT which starts a batch of hardware counters for sampling. This will allow the userspace to start a monitoring session using the INIT method and to stop it with SAMPLE, for example before and after a frame is rendered. This commit temporarily breaks nv_perfmon but this is going to be fixed with the upcoming patch. Signed-off-by:
-
Samuel Pitoiset authored
This allows to query the ID, the mask and the user-readable name of sources for each signal. Signed-off-by:
-
Samuel Pitoiset authored
Signed-off-by:
-
Samuel Pitoiset authored
A source (or multiplexer) is a tuple addr+mask+shift which allows to control a block of signals. The maximum number of sources that a signal can define is arbitrary limited to 8 and this should be large enough. This patch allows to define multi-level of sources for a signal. Each different sources are stored to a global list and will be exposed to the userspace through the nvif interface in order to avoid conflicts. Signed-off-by: Samuel Pitoiset <samuel.pitoiset at gmail.com> Signed-off-by: -
Samuel Pitoiset authored
This signal index must be always allowed even if it's not clearly defined in a domain in order to monitor a counter like 0x03020100 because it's the default value of signals. Signed-off-by:
-
Samuel Pitoiset authored
Signed-off-by:
-
Samuel Pitoiset authored
16 bits is large enough to store the maximum number of signals available for one domain (i.e. 256). Signed-off-by:
-
Samuel Pitoiset authored
This will allow to configure performance counters with hardware signal indexes instead of user-readable names in an upcoming patch. Signed-off-by:
-
Samuel Pitoiset authored
This allows to query the number of available domains, including the number of hardware counter and the number of signals per domain. Signed-off-by:
-
Samuel Pitoiset authored
Since a new class has been introduced to query signals, we can now return an error when the userspace wants to monitor unknown signals. Signed-off-by:
-
Samuel Pitoiset authored
This commit introduces the NVIF_IOCTL_NEW_V0_PERFMON class which will be used in order to query domains, signals and sources. This separates the querying and the counting interface. Signed-off-by:
-
Samuel Pitoiset authored
Signed-off-by:
Martin Peres <martin.peres@free.fr> Signed-off-by:
-
Samuel Pitoiset authored
PDAEMON signals don't have to be exposed by the perfmon engine. Signed-off-by:
-
Roy Spliet authored
Tested on a few cards. Probably works quite well for most, given they should all be GDDR3. Signed-off-by:
Roy Spliet <rspliet@eclipso.eu> Signed-off-by:
-
Roy Spliet authored
Signed-off-by:
-
Roy Spliet authored
This looks surprisingly similar to scripts on earlier cards as well but they don't seem to work just yet. That... and I don't have any, which makes it a tough job to reverse engineer. Signed-off-by:
-
Roy Spliet authored
Signed-off-by:
-
Roy Spliet authored
Some of the bits in there are similar to the bits in the gt215 rammap. Signed-off-by:
-
Roy Spliet authored
Might need some generalisation to < GT200. For those: use at your own risk! Signed-off-by:
-
Roy Spliet authored
Signed-off-by:
-
Roy Spliet authored
Like on GT215 Signed-off-by:
-
Roy Spliet authored
In preparation of NV50 reclocking, where there is no version Signed-off-by:
-
Ben Skeggs authored
This was merged with core/device.h in an earlier commit, but somehow never got removed. Signed-off-by:
-
- 27 Aug, 2015 3 commits
-
-
git://ftp.arm.linux.org.uk/~rmk/linux-armDave Airlie authored
Here are some development updates for the Synopsis Designware HDMI driver, which clean up some of the code, and start preparing to add audio support to the driver. This series of patches are based on a couple of dependent commits from the ALSA tree. Briefly, the updates are: - move comments which should have moved with the phy values to the IMX part of the driver. - clean up the phy configuration: to all lookups before starting to program the phy. - clean up the HDMI clock regenerator code - use the drm_hdmi_avi_infoframe_from_display_mode() helper which allows the code to be subsequently simplified - remove the unused 'regmap' pointer in struct dw_hdmi - use the bridge drm device rather than the connector (we're the bridge code) - remove private hsync/vsync/interlaced flags, getting them from the DRM mode structure instead. - implement interface functions to support audio - setting the audio sample rate, and enabling the audio clocks. - removal of broken pixel repetition support - cleanup DVI vs HDMI sink handling - enable audio only if connected device supports audio - avoid double-enabling bridge in the sink path (once in mode_set, and again in commit) - rename mis-named dw_hdmi_phy_enable_power() - fix bridge enable/disable handing, so a plug-in event doesn't reconfigure the bridge if DRM has disabled the output - fix from Vladimir Zapolskiy for the I2CM_ADDRESS macro name These are primerily preparitory patches for the AHB audio driver and the I2S audio driver (from Rockchip) for this IP. * 'drm-dwhdmi-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: drm: bridge/dw_hdmi: fix register I2CM_ADDRESS register name drm: bridge/dw_hdmi: fix phy enable/disable handling drm: bridge/dw_hdmi: rename dw_hdmi_phy_enable_power() drm: bridge/dw_hdmi: avoid enabling interface in mode_set drm: bridge/dw_hdmi: enable audio only if sink supports audio drm: bridge/dw_hdmi: clean up HDMI vs DVI mode handling drm: bridge/dw_hdmi: don't support any pixel doubled modes drm: bridge/dw_hdmi: remove pixel repetition setting for all VICs drm: bridge/dw_hdmi: introduce interfaces to enable and disable audio drm: bridge/dw_hdmi: introduce interface to setting sample rate drm: bridge/dw_hdmi: remove mhsyncpolarity/mvsyncpolarity/minterlaced drm: bridge/dw_hdmi: use our own drm_device drm: bridge/dw_hdmi: remove unused 'regmap' struct member drm: bridge/dw_hdmi: simplify hdmi_config_AVI() a little drm: bridge/dw_hdmi: use drm_hdmi_avi_infoframe_from_display_mode() drm: bridge/dw_hdmi: clean up hdmi_set_clk_regenerator() drm: bridge/dw_hdmi: clean up phy configuration drm: imx/dw_hdmi: move phy comments drm/edid: add function to help find SADs
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
Pull request of 15-08-21 The third pull request for 4.3. Contains two fixes for regressions introduced with previous pull requests. * tag 'vmwgfx-next-15-08-21' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Remove duplicate ttm_bo_device_release drm/vmwgfx: Fix a circular locking dependency in the fbdev code
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
- DP fixes for radeon and amdgpu - IH ring fix for tonga and fiji - Lots of GPU scheduler fixes - Misc additional fixes * 'drm-next-4.3' of git://people.freedesktop.org/~agd5f/linux: (42 commits) drm/amdgpu: fix wait queue handling in the scheduler drm/amdgpu: remove extra parameters from scheduler callbacks drm/amdgpu: wake up scheduler only when neccessary drm/amdgpu: remove entity idle timeout v2 drm/amdgpu: fix postclose order drm/amdgpu: use IB for copy buffer of eviction drm/amdgpu: adjust the judgement of removing fence callback drm/amdgpu: fix no sync_wait in copy_buffer drm/amdgpu: fix last_vm_update fence is not effetive for sched fence drm/amdgpu: add priv data to sched drm/amdgpu: add owner for sched fence drm/amdgpu: remove entity reference from sched fence drm/amdgpu: fix and cleanup amd_sched_entity_push_job drm/amdgpu: remove amdgpu_bo_list_clone drm/amdgpu: remove the context from amdgpu_job drm/amdgpu: remove unused parameters to amd_sched_create drm/amdgpu: remove sched_lock drm/amdgpu: remove prepare_job callback drm/amdgpu: cleanup a scheduler function name drm/amdgpu: reorder scheduler functions ...
-
