- 26 Aug, 2017 10 commits
-
-
WANG Cong authored
For TC classes, their ->get() and ->put() are always paired, and the reference counting is completely useless, because: 1) For class modification and dumping paths, we already hold RTNL lock, so all of these ->get(),->change(),->put() are atomic. 2) For filter bindiing/unbinding, we use other reference counter than this one, and they should have RTNL lock too. 3) For ->qlen_notify(), it is special because it is called on ->enqueue() path, but we already hold qdisc tree lock there, and we hold this tree lock when graft or delete the class too, so it should not be gone or changed until we release the tree lock. Therefore, this patch removes ->get() and ->put(), but: 1) Adds a new ->find() to find the pointer to a class by classid, no refcnt. 2) Move the original class destroy upon the last refcnt into ->delete(), right after releasing tree lock. This is fine because the class is already removed from hash when holding the lock. For those who also use ->put() as ->unbind(), just rename them to reflect this change. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
WANG Cong authored
Like for TC actions, ->delete() is a special case, we have to prepare and fill the notification before delete otherwise would get use-after-free after we remove the reference count. Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
WANG Cong authored
This is not needed if we move them up properly. Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The skb_pad() function frees the skb on error, so this code has a double free. Fixes: 00e57a6d ("net-next/hinic: Add Tx operation") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
David Lebrun says: ==================== net: updates for IPv6 Segment Routing v2: seg6_lwt_headroom() is not relevant for lwtunnel_input_redirect() use cases, and L2ENCAP only uses this redirection. Fix incoherence between arbitrary MAC header size support and fixed headroom computation by setting only LWTUNNEL_STATE_INPUT_REDIRECT for L2ENCAP mode. This patch series provides several updates for the SRv6 implementation. The first patch leverages the existing infrastructure to support encapsulation of IPv4 packets. The second patch implements the T.Encaps.L2 SR function, enabling to encapsulate an L2 Ethernet frame within an IPv6+SRH packet. The last three patches update the seg6local lightweight tunnel, and mainly implement four new actions: End.T, End.DX2, End.DX4 and End.DT6. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Lebrun authored
This patch implements the following seg6local actions. - SEG6_LOCAL_ACTION_END_T: regular SRH processing and forward to the next-hop looked up in the specified routing table. - SEG6_LOCAL_ACTION_END_DX2: decapsulate an L2 frame and forward it to the specified network interface. - SEG6_LOCAL_ACTION_END_DX4: decapsulate an IPv4 packet and forward it, possibly to the specified next-hop. - SEG6_LOCAL_ACTION_END_DT6: decapsulate an IPv6 packet and forward it to the next-hop looked up in the specified routing table. Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Lebrun authored
This patch adds three helper functions to be used with the seg6local packet processing actions. The decap_and_validate() function will be used by the End.D* actions, that decapsulate an SR-enabled packet. The advance_nextseg() function applies the fundamental operations to update an SRH for the next segment. The lookup_nexthop() function helps select the next-hop for the processed SR packets. It supports an optional next-hop address to route the packet specifically through it, and an optional routing table to use. Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Lebrun authored
This patch ensures that the seg6local lightweight tunnel is used solely with IPv6 routes and processes only IPv6 packets. Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Lebrun authored
This patch implements the L2 frame encapsulation mechanism, referred to as T.Encaps.L2 in the SRv6 specifications [1]. A new type of SRv6 tunnel mode is added (SEG6_IPTUN_MODE_L2ENCAP). It only accepts packets with an existing MAC header (i.e., it will not work for locally generated packets). The resulting packet looks like IPv6 -> SRH -> Ethernet -> original L3 payload. The next header field of the SRH is set to NEXTHDR_NONE. [1] https://tools.ietf.org/html/draft-filsfils-spring-srv6-network-programming-01Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Lebrun authored
This patch enables the SRv6 encapsulation mode to carry an IPv4 payload. All the infrastructure was already present, I just had to add a parameter to seg6_do_srh_encap() to specify the inner packet protocol, and perform some additional checks. Usage example: ip route add 1.2.3.4 encap seg6 mode encap segs fc00::1,fc00::2 dev eth0 Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 25 Aug, 2017 13 commits
-
-
Eric Biggers authored
commit bbb03029 ("strparser: Generalize strparser") added more function pointers to 'struct strp_callbacks'; however, kcm_attach() was not updated to initialize them. This could cause the ->lock() and/or ->unlock() function pointers to be set to garbage values, causing a crash in strp_work(). Fix the bug by moving the callback structs into static memory, so unspecified members are zeroed. Also constify them while we're at it. This bug was found by syzkaller, which encountered the following splat: IP: 0x55 PGD 3b1ca067 P4D 3b1ca067 PUD 3b12f067 PMD 0 Oops: 0010 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 2 PID: 1194 Comm: kworker/u8:1 Not tainted 4.13.0-rc4-next-20170811 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: kstrp strp_work task: ffff88006bb0e480 task.stack: ffff88006bb10000 RIP: 0010:0x55 RSP: 0018:ffff88006bb17540 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff88006ce4bd60 RCX: 0000000000000000 RDX: 1ffff1000d9c97bd RSI: 0000000000000000 RDI: ffff88006ce4bc48 RBP: ffff88006bb17558 R08: ffffffff81467ab2 R09: 0000000000000000 R10: ffff88006bb17438 R11: ffff88006bb17940 R12: ffff88006ce4bc48 R13: ffff88003c683018 R14: ffff88006bb17980 R15: ffff88003c683000 FS: 0000000000000000(0000) GS:ffff88006de00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000055 CR3: 000000003c145000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: process_one_work+0xbf3/0x1bc0 kernel/workqueue.c:2098 worker_thread+0x223/0x1860 kernel/workqueue.c:2233 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Code: Bad RIP value. RIP: 0x55 RSP: ffff88006bb17540 CR2: 0000000000000055 ---[ end trace f0e4920047069cee ]--- Here is a C reproducer (requires CONFIG_BPF_SYSCALL=y and CONFIG_AF_KCM=y): #include <linux/bpf.h> #include <linux/kcm.h> #include <linux/types.h> #include <stdint.h> #include <sys/ioctl.h> #include <sys/socket.h> #include <sys/syscall.h> #include <unistd.h> static const struct bpf_insn bpf_insns[3] = { { .code = 0xb7 }, /* BPF_MOV64_IMM(0, 0) */ { .code = 0x95 }, /* BPF_EXIT_INSN() */ }; static const union bpf_attr bpf_attr = { .prog_type = 1, .insn_cnt = 2, .insns = (uintptr_t)&bpf_insns, .license = (uintptr_t)"", }; int main(void) { int bpf_fd = syscall(__NR_bpf, BPF_PROG_LOAD, &bpf_attr, sizeof(bpf_attr)); int inet_fd = socket(AF_INET, SOCK_STREAM, 0); int kcm_fd = socket(AF_KCM, SOCK_DGRAM, 0); ioctl(kcm_fd, SIOCKCMATTACH, &(struct kcm_attach) { .fd = inet_fd, .bpf_fd = bpf_fd }); } Fixes: bbb03029 ("strparser: Generalize strparser") Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Tom Herbert <tom@quantonium.net> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haiyang Zhang authored
We now remove rndis filter before unregister_netdev(), which calls device close. It involves closing rndis filter already removed. This patch fixes this error. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2017-08-24 This series includes updates to mlx5 core driver. From Gal and Saeed, three cleanup patches. From Matan, Low level flow steering improvements and optimizations, - Use more efficient data structures for flow steering objects handling. - Add tracepoints to flow steering operations. - Overall these patches improve flow steering rule insertion rate by a factor of seven in large scales (~50K rules or more). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
We never set the error code in this function. Fixes: eabf0fad ("net-next/hinic: Initialize api cmd resources") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
txq_reclaim() does the normal transmit queue reclamation and rxq_deinit() does the RX ring cleanup, none of these are packet drops, so use dev_consume_skb() for both locations. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
tg3_tx() does the normal packet TX completion, tigon3_dma_hwbug_workaround() and tg3_tso_bug() both need to allocate a new SKB that is suitable to workaround HW bugs, and finally tg3_free_rings() is doing ring cleanup. Use dev_consume_skb_any() for these 3 locations to be SKB drop monitor friendly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Sitnicki says: ==================== ipv6: Route ICMPv6 errors with the flow when ECMP in use This patch set is another take at making Path MTU Discovery work when server nodes are behind a router employing multipath routing in a load-balance or anycast setup (that is, when not every end-node can be reached by every path). The problem has been well described in RFC 7690 [1], but in short - in such setups ICMPv6 PTB errors are not guaranteed to be routed back to the server node that sent a reply that exceeds path MTU. The proposed solution is two-fold: (1) on the server side - reflect the Flow Label [2]. This can be done without modifying the application using a new per-netns sysctl knob that has been proposed independently of this patchset in the patch entitled "ipv6: Add sysctl for per namespace flow label reflection" [3]. (2) on the ECMP router - make the ipv6 routing subsystem look into the ICMPv6 error packets and compute the flow-hash from its payload, i.e. the offending packet that triggered the error. This is the same behavior as ipv4 stack has already. With both parts in place Path MTU Discovery can work past the ECMP router when using IPv6. [1] https://tools.ietf.org/html/rfc7690 [2] https://tools.ietf.org/html/draft-wang-6man-flow-label-reflection-01 [3] http://patchwork.ozlabs.org/patch/804870/ v1 -> v2: - don't use "extern" in external function declaration in header file - style change, put as many arguments as possible on the first line of a function call, and align consecutive lines to the first argument - expand the cover letter based on the feedback v2 -> v3: - switch to computing flow-hash using flow dissector to align with recent changes to multipath routing in ipv4 stack - add a sysctl knob for enabling flow label reflection per netns --- Testing has covered multipath routing of ICMPv6 PTB errors in forward and local output path in a simple use-case of an HTTP server sending a reply which is over the path MTU size [3]. I have also checked if the flows get evenly spread over multiple paths (i.e. if there are no regressions) [4]. [3] https://github.com/jsitnicki/tools/tree/master/net/tests/ecmp/pmtud [4] https://github.com/jsitnicki/tools/tree/master/net/tests/ecmp/load-balance ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Sitnicki authored
Allow our callers to influence the choice of ECMP link by honoring the hash passed together with the flow info. This allows for special treatment of ICMP errors which we would like to route over the same path as the IPv6 datagram that triggered the error. Also go through rt6_multipath_hash(), in the usual case when we aren't dealing with an ICMP error, so that there is one central place where multipath hash is computed. Signed-off-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Sitnicki authored
Commit 644d0e65 ("ipv6 Use get_hash_from_flowi6 for rt6 hash") has turned rt6_info_hash_nhsfn() into a one-liner, so it no longer makes sense to keep it around. Also remove the accompanying comment that has become outdated. Signed-off-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Sitnicki authored
When forwarding or sending out an ICMPv6 error, look at the embedded packet that triggered the error and compute a flow hash over its headers. This let's us route the ICMP error together with the flow it belongs to when multipath (ECMP) routing is in use, which in turn makes Path MTU Discovery work in ECMP load-balanced or anycast setups (RFC 7690). Granted, end-hosts behind the ECMP router (aka servers) need to reflect the IPv6 Flow Label for PMTUD to work. The code is organized to be in parallel with ipv4 stack: ip_multipath_l3_keys -> ip6_multipath_l3_keys fib_multipath_hash -> rt6_multipath_hash Signed-off-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Sitnicki authored
Allow for functions that fill out the IPv6 flow info to also pass a hash computed over the skb contents. The hash value will drive the multipath routing decisions. This is intended for special treatment of ICMPv6 errors, where we would like to make a routing decision based on the flow identifying the offending IPv6 datagram that triggered the error, rather than the flow of the ICMP error itself. Signed-off-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
One too many arguments compared to the non-stub version. Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: ffd3cdcc ("devlink: Add support for dynamic table size") Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Sitnicki authored
Reflecting IPv6 Flow Label at server nodes is useful in environments that employ multipath routing to load balance the requests. As "IPv6 Flow Label Reflection" standard draft [1] points out - ICMPv6 PTB error messages generated in response to a downstream packets from the server can be routed by a load balancer back to the original server without looking at transport headers, if the server applies the flow label reflection. This enables the Path MTU Discovery past the ECMP router in load-balance or anycast environments where each server node is reachable by only one path. Introduce a sysctl to enable flow label reflection per net namespace for all newly created sockets. Same could be earlier achieved only per socket by setting the IPV6_FL_F_REFLECT flag for the IPV6_FLOWLABEL_MGR socket option. [1] https://tools.ietf.org/html/draft-wang-6man-flow-label-reflection-01Signed-off-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 Aug, 2017 17 commits
-
-
Bhumika Goyal authored
Make this const as it is only passed as an argument to the function mlx5e_create_netdev and the corresponding argument is of type const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bhumika Goyal authored
Make these const as they are only used in a copy operation. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jesper Dangaard Brouer says: ==================== xdp: more work on xdp tracepoints More work on streamlining and performance optimizing the tracepoints for XDP. I've created a simple xdp_monitor application that uses this tracepoint, and prints statistics. Available at github: https://github.com/netoptimizer/prototype-kernel/blob/master/kernel/samples/bpf/xdp_monitor_kern.c https://github.com/netoptimizer/prototype-kernel/blob/master/kernel/samples/bpf/xdp_monitor_user.c The improvement over tracepoint with strcpy: 9810372 - 8428762 = +1381610 pps faster - (1/9810372 - 1/8428762)*10^9 = -16.7 nanosec - 100-(8428762/9810372*100) = strcpy-trace is 14.08% slower - 981037/8428762*100 = removing strcpy made it 11.64% faster V3: Fix merge conflict with commit e4a8e817 ("bpf: misc xdp redirect cleanups") V2: Change trace_xdp_redirect() to align with args of trace_xdp_exception() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
Remove the net_device string name from the xdp_exception tracepoint, like the xdp_redirect tracepoint. Align the TP_STRUCT to have common entries between these two tracepoint. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
There is too much overhead in the current trace_xdp_redirect tracepoint as it does strcpy and strlen on the net_device names. Besides, exposing the ifindex/index is actually the information that is needed in the tracepoint to diagnose issues. When a lookup fails (either ifindex or devmap index) then there is a need for saying which to_index that have issues. V2: Adjust args to be aligned with trace_xdp_exception. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
For XDP_REDIRECT the use of return code -EINVAL is confusing, as it is used in three different cases. (1) When the index or ifindex lookup fails, and in the ixgbe driver (2) when link is down and (3) when XDP have not been enabled. The return code can be picked up by the tracepoint xdp:xdp_redirect for diagnosing why XDP_REDIRECT isn't working. Thus, there is a need different return codes to tell the issues apart. I'm considering using a specific err-code scheme for XDP_REDIRECT instead of using these errno codes. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
If the xdp_do_generic_redirect() call fails, it trigger the trace_xdp_exception tracepoint. It seems better to use the same tracepoint trace_xdp_redirect, as the native xdp_do_redirect{,_map} does. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
Given there is a tracepoint that can track the error code of xdp_do_redirect calls, the WARN_ONCE in bpf_warn_invalid_xdp_redirect doesn't seem relevant any longer. Simply remove the function. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Add IPv4 host dpipe table Arkadi says: This patchset adds IPv4 host dpipe table support. This will provide the ability to observe the hardware offloaded IPv4 neighbors. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
Add support for controlling neighbor counters via dpipe. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
Add support for IPv4 host table dump. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
Add support for setting counters on neighbors based on dpipe's host table counter status. This patch also adds the ability for getting the counter value, which will be used by the dpipe host table implementation in the next patches. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
This is done as a preparation before introducing support for neighbor counters. The flow counter's type enum is used by many registers, yet, until now it was used only by mgpc and thus it was private. This patch updates the namespace for more generic usage. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
Add IPv4 host table initial support. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
Change label name for case of erif table init failure. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
This is done as a preparation before introducing the ability to dump the host table via dpipe, and to count the table size. The mlxsw's neighbor representative struct stays private to the router module. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
The entry clear routine can be shared between the drivers, thus it is moved inside devlink. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-