- 01 Sep, 2016 1 commit
-
-
Colin Ian King authored
Trivial fix to typos dev_dbg messages and comment. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 31 Aug, 2016 1 commit
-
-
Takashi Sakamoto authored
Currently, automatic variable of 'union ioctl_arg' type is initialized by designated initialization. Although, the actual effect is interpretation of early element of int type and initialization of 'int pversion'. Therefore the first field corresponding to int type is initialized to zero. This is against my expectation to initialize whole fields. This commit uses memset() to initialize the variable, instead of designated initialization. Fixes: 04a56dd8 ('ALSA: seq: change ioctl command operation to get data in kernel space') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 25 Aug, 2016 1 commit
-
-
Aaro Koskinen authored
Enable sound on PowerBook G4 12". Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 24 Aug, 2016 2 commits
-
-
Takashi Sakamoto authored
The below models were developed with a cooperation by Yamaha and Terratec. - Yamaha GO 44/Terratec PHASE 24 FW - Yamaha GO 46/Terratec PHASE X24 FW They have the same configurations, thus it's better to unify corresponding codes. This commit merges them to reduce the amount of maintained codes. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
Once Yamaha and Terratec cooperated to develop some audio and music units on IEEE 1394 bus. On these models, the same embedded board is used, and similar configurations are also applied. This commit renames file for Yamaha's configuration so that it's for both of Yamaha and Terratec. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 22 Aug, 2016 10 commits
-
-
Colin Ian King authored
Trivial fix to spelling mistake in dev_warn message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Markus Elfring authored
Reuse existing functionality from memdup_user() instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Shawn Lin authored
kmalloc already print similar error once failing to alloc enough memory, so let's remove this dump here. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Daniel Mack authored
Users of devices affected by the Tenor feedback data error report buffer underruns, even with the +/- 0x1.0000 quirk applied. Compensating the error with 0xf000 instead seems to reliably fix that issue. See https://sourceforge.net/p/alsa/mailman/message/35230259/Reported-and-tested-by: Norman Nolte <norman.nolte@gmx.net> Reported-and-tested-by: Thomas Gresens <T.Gresens@intershop.de> Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Daniel Mack authored
The quirk seems to be necessary not only for TEAC UD-H01 devices, but to more that are based on the Tenor 8802TL chipset. Devices built by T+A are affected too, and they apparently all use the same USB PID:PID. Extend the quirky handling for that device as well, and rename the quirks flag. Reported-and-tested-by: Thomas Gresens <T.Gresens@intershop.de> Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Daniel Mack authored
That's a quirk, after all, so move it where to all the other quirks live. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
Former commits change existent functions so that they don't handle data in kernel space. Copying from/to userspace is done outside of the functions, thus no need to change address limit of running task. This commit obsoletes get_fs()/set_fs() and applies corresponding changes. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
In previous commit, a new table for functions with data in kernel space is added to replace current table. This commit changes existent functions to fit the table. These functions are added to the new table and removed from the old table. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
ALSA sequencer is designed with two types of clients; application and kernel. Operations for each ioctl command should handle data in both of user space and kernel space, while current implementation just allows them to handle data in user space. Data in kernel space is handled with change of address limit of running tasks. This commit adds a new table to map ioctl commands to corresponding functions. The functions get data in kernel space. Helper functions to operate kernel and application clients seek entries from the table. Especially, the helper function for application is responsible for coping from user space to kernel space or vise versa. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
This kernel API is used by kernel implementation. Currently, it's used for kernel clients of ALSA sequencer, while it can be used for application clients. The difference is just on address spaces of argument. In short, this kernel API can be available for application client with data in kernel space. This commit adds a document about this. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 11 Aug, 2016 1 commit
-
-
Wolfram Sang authored
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 09 Aug, 2016 8 commits
-
-
Takashi Iwai authored
-
Guneshwor Singh authored
The HDA controller from SKL onwards support additional timestamp reporting of the link time. The link time is read from HW registers and converted to audio values. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by: Hardik T Shah <hardik.t.shah@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Guneshwor Singh authored
Skylake onwards HDA controller supports new capabilities like Global Time Stamping (GTS) capability. So add support to parse these new capabilities. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by: Hardik T Shah <hardik.t.shah@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Vinod Koul authored
Remove the unused one as we have moved it up to hdac core. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Vinod Koul authored
Now that we have the bus parse capabilities moved to core, we need to convert users. The SKL driver and HDA extended lib needs to converted in single patch, otherwise we regress on the functionality. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Vinod Koul authored
HDA capability introduced recently are move to hdac core so that it can be used by legacy driver as well. Also move the capability pointers up to hdac_bus object. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Vittorio Gambaletta (VittGam) authored
The ELP HD USB Camera (05a3:9420) needs this quirk for suppressing the unsupported sample rate inquiry. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98481 Cc: <stable@vger.kernel.org> Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Piotr Karasinski authored
VF0610 does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x82". This patch adds the USB ID (0x041E:4080) to snd_usb_get_sample_rate_quirk() list. Signed-off-by: Piotr Karasinski <peter.karasinski@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 08 Aug, 2016 1 commit
-
-
Linus Torvalds authored
-
- 07 Aug, 2016 10 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull more block fixes from Jens Axboe: "As mentioned in the pull the other day, a few more fixes for this round, all related to the bio op changes in this series. Two fixes, and then a cleanup, renaming bio->bi_rw to bio->bi_opf. I wanted to do that change right after or right before -rc1, so that risk of conflict was reduced. I just rebased the series on top of current master, and no new ->bi_rw usage has snuck in" * 'for-linus' of git://git.kernel.dk/linux-block: block: rename bio bi_rw to bi_opf target: iblock_execute_sync_cache() should use bio_set_op_attrs() mm: make __swap_writepage() use bio_set_op_attrs() block/mm: make bdev_ops->rw_page() take a bool for read/write
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm zpos property support from Dave Airlie: "This tree was waiting on some media stuff I hadn't had time to get a stable branchpoint off, so I just waited until it was all in your tree first. It's been around a bit on the list and shouldn't affect anything outside adding the generic API and moving some ARM drivers to using it" * tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux: drm: rcar: use generic code for managing zpos plane property drm/exynos: use generic code for managing zpos plane property drm: sti: use generic zpos for plane drm: add generic zpos property
-
Jens Axboe authored
Since commit 63a4cc24, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by: Jens Axboe <axboe@fb.com>
-
Jens Axboe authored
The original commit missed this function, it needs to mark it a write flush. Cc: Mike Christie <mchristi@redhat.com> Fixes: e742fc32 ("target: use bio op accessors") Signed-off-by: Jens Axboe <axboe@fb.com>
-
Jens Axboe authored
Cleaner than manipulating bio->bi_rw flags directly. Signed-off-by: Jens Axboe <axboe@fb.com>
-
Jens Axboe authored
Commit abf54548 changed it from an 'rw' flags type to the newer ops based interface, but now we're effectively leaking some bdev internals to the rest of the kernel. Since we only care about whether it's a read or a write at that level, just pass in a bool 'is_write' parameter instead. Then we can also move op_is_write() and friends back under CONFIG_BLOCK protection. Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation fixes from Jonathan Corbet: "Three fixes for the docs build, including removing an annoying warning on 'make help' if sphinx isn't present" * tag 'doc-4.8-fixes' of git://git.lwn.net/linux: DocBook: use DOCBOOKS="" to ignore DocBooks instead of IGNORE_DOCBOOKS=1 Documenation: update cgroup's document path Documentation/sphinx: do not warn about missing tools in 'make help'
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_miscLinus Torvalds authored
Pull binfmt_misc update from James Bottomley: "This update is to allow architecture emulation containers to function such that the emulation binary can be housed outside the container itself. The container and fs parts both have acks from relevant experts. To use the new feature you have to add an F option to your binfmt_misc configuration" From the docs: "The usual behaviour of binfmt_misc is to spawn the binary lazily when the misc format file is invoked. However, this doesn't work very well in the face of mount namespaces and changeroots, so the F mode opens the binary as soon as the emulation is installed and uses the opened image to spawn the emulator, meaning it is always available once installed, regardless of how the environment changes" * tag 'binfmt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_misc: binfmt_misc: add F option description to documentation binfmt_misc: add persistent opened binary handler for containers fs: add filp_clone_open API
-
Eryu Guan authored
In most cases, EPERM is returned on immutable inode, and there're only a few places returning EACCES. I noticed this when running LTP on overlayfs, setxattr03 failed due to unexpected EACCES on immutable inode. So converting all EACCES to EPERM on immutable inode. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eryu Guan <guaneryu@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more vfs updates from Al Viro: "Assorted cleanups and fixes. In the "trivial API change" department - ->d_compare() losing 'parent' argument" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: cachefiles: Fix race between inactivating and culling a cache object 9p: use clone_fid() 9p: fix braino introduced in "9p: new helper - v9fs_parent_fid()" vfs: make dentry_needs_remove_privs() internal vfs: remove file_needs_remove_privs() vfs: fix deadlock in file_remove_privs() on overlayfs get rid of 'parent' argument of ->d_compare() cifs, msdos, vfat, hfs+: don't bother with parent in ->d_compare() affs ->d_compare(): don't bother with ->d_inode fold _d_rehash() and __d_rehash() together fold dentry_rcuwalk_invalidate() into its only remaining caller
-
- 06 Aug, 2016 5 commits
-
-
Linus Torvalds authored
Merge tag 'xfs-rmap-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull more xfs updates from Dave Chinner: "This is the second part of the XFS updates for this merge cycle, and contains the new reverse block mapping feature for XFS. Reverse mapping allows us to track the owner of a specific block on disk precisely. It is implemented as a set of btrees (one per allocation group) that track the owners of allocated extents. Effectively it is a "used space tree" that is updated when we allocate or free extents. i.e. it is coherent with the free space btrees we already maintain and never overlaps with them. This reverse mapping infrastructure is the building block of several upcoming features - reflink, copy-on-write data, dedupe, online metadata and data scrubbing, highly accurate bad sector/data loss reporting to users, and significantly improved reconstruction of damaged and corrupted filesystems. There's a lot of new stuff coming along in the next couple of cycles,a nd it all builds in the rmap infrastructure. As such, it's a huge chunk of new code with new on-disk format features and internal infrastructure. It warns at mount time as an experimental feature and that it may eat data (as we do with all new on-disk features until they stabilise). We have not released userspace suport for it yet - userspace support currently requires download from Darrick's xfsprogs repo and build from source, so the access to this feature is really developer/tester only at this point. Initial userspace support will be released at the same time kernel with this code in it is released. The new rmap enabled code regresses 3 xfstests - all are ENOSPC related corner cases, one of which Darrick posted a fix for a few hours ago. The other two are fixed by infrastructure that is part of the upcoming reflink patchset. This new ENOSPC infrastructure requires a on-disk format tweak required to keep mount times in check - we need to keep an on-disk count of allocated rmapbt blocks so we don't have to scan the entire btrees at mount time to count them. This is currently being tested and will be part of the fixes sent in the next week or two so users will not be exposed to this change" * tag 'xfs-rmap-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (52 commits) xfs: move (and rename) the deferred bmap-free tracepoints xfs: collapse single use static functions xfs: remove unnecessary parentheses from log redo item recovery functions xfs: remove the extents array from the rmap update done log item xfs: in btree_lshift, only allocate temporary cursor when needed xfs: remove unnecesary lshift/rshift key initialization xfs: remove the get*keys and update_keys btree ops pointers xfs: enable the rmap btree functionality xfs: don't update rmapbt when fixing agfl xfs: disable XFS_IOC_SWAPEXT when rmap btree is enabled xfs: add rmap btree block detection to log recovery xfs: add rmap btree geometry feature flag xfs: propagate bmap updates to rmapbt xfs: enable the xfs_defer mechanism to process rmaps to update xfs: log rmap intent items xfs: create rmap update intent log items xfs: add rmap btree insert and delete helpers xfs: convert unwritten status of reverse mappings xfs: remove an extent from the rmap btree xfs: add an extent to the rmap btree ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull qstr constification updates from Al Viro: "Fairly self-contained bunch - surprising lot of places passes struct qstr * as an argument when const struct qstr * would suffice; it complicates analysis for no good reason. I'd prefer to feed that separately from the assorted fixes (those are in #for-linus and with somewhat trickier topology)" * 'work.const-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: qstr: constify instances in adfs qstr: constify instances in lustre qstr: constify instances in f2fs qstr: constify instances in ext2 qstr: constify instances in vfat qstr: constify instances in procfs qstr: constify instances in fuse qstr constify instances in fs/dcache.c qstr: constify instances in nfs qstr: constify instances in ocfs2 qstr: constify instances in autofs4 qstr: constify instances in hfs qstr: constify instances in hfsplus qstr: constify instances in logfs qstr: constify dentry_init_security
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull mailcap fixlets from Mauro Carvalho Chehab: "A small fixup for my and Shuah's entries in .mailcap. Basically, those entries were with a syntax that makes get_maintainer.pl to do the wrong thing" * tag 'media/v4.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: .mailmap: Correct entries for Mauro Carvalho Chehab and Shuah Khan
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio/vhost updates from Michael Tsirkin: - new vsock device support in host and guest - platform IOMMU support in host and guest, including compatibility quirks for legacy systems. - misc fixes and cleanups. * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: VSOCK: Use kvfree() vhost: split out vringh Kconfig vhost: detect 32 bit integer wrap around vhost: new device IOTLB API vhost: drop vringh dependency vhost: convert pre sorted vhost memory array to interval tree vhost: introduce vhost memory accessors VSOCK: Add Makefile and Kconfig VSOCK: Introduce vhost_vsock.ko VSOCK: Introduce virtio_transport.ko VSOCK: Introduce virtio_vsock_common.ko VSOCK: defer sock removal to transports VSOCK: transport-specific vsock_transport functions vhost: drop vringh dependency vop: pull in vhost Kconfig virtio: new feature to detect IOMMU device quirk balloon: check the number of available pages in leak balloon vhost: lockless enqueuing vhost: simplify work flushing
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull more KVM updates from Paolo Bonzini: - ARM bugfix and MSI injection support - x86 nested virt tweak and OOPS fix - Simplify pvclock code (vdso bits acked by Andy Lutomirski). * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: nvmx: mark ept single context invalidation as supported nvmx: remove comment about missing nested vpid support KVM: lapic: fix access preemption timer stuff even if kernel_irqchip=off KVM: documentation: fix KVM_CAP_X2APIC_API information x86: vdso: use __pvclock_read_cycles pvclock: introduce seqcount-like API arm64: KVM: Set cpsr before spsr on fault injection KVM: arm: vgic-irqfd: Workaround changing kvm_set_routing_entry prototype KVM: arm/arm64: Enable MSI routing KVM: arm/arm64: Enable irqchip routing KVM: Move kvm_setup_default/empty_irq_routing declaration in arch specific header KVM: irqchip: Convey devid to kvm_set_msi KVM: Add devid in kvm_kernel_irq_routing_entry KVM: api: Pass the devid in the msi routing entry
-