Skip to content

L
linux
Switch branch/tag
  1. 20 Dec, 2007 8 commits
  3. 19 Dec, 2007 24 commits
  5. 18 Dec, 2007 8 commits
    • Boaz Harrosh's avatar
      [SCSI] initio: bugfix for accessors patch · a169e637
      Boaz Harrosh authored 
      patch: [SCSI] initio: convert to use the data buffer accessors had a
small but fatal bug in that it didn't increment the pointer into the
initio scatterlist descriptors as it looped over the block generated
ones. Fixed here.
Signed-off-by: default avatarBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
      a169e637
    • FUJITA Tomonori's avatar
      [SCSI] st: fix kernel BUG at include/linux/scatterlist.h:59! · cd81621c
      FUJITA Tomonori authored 
      This is caused by a missing scatterlist initialisation (it only shows
up when sg list handling debugging is turned on).
Signed-off-by: default avatarFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Kai Makisara <Kai.Makisara@kolumbus.fi>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
      cd81621c
    • Alan Cox's avatar
      [SCSI] initio: fix conflict when loading driver · 99f1f534
      Alan Cox authored 
      > I have a scanner connected to a Initio INI-950 SCSI card and I recently
> upgraded from SuSE 10.2 to 10.3.  The new kernel doesn't see any of my
> devices.  I get the following in /var/log/messages:
>
> ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 16
> initio: I/O port range 0x0 is busy.
> ACPI: PCI interrupt for device 0000:00:0a.0 disabled

Humm not a collision - thats a bug in the driver updating.  Looks like the
changes I made and combined with Christoph's lost a line somewhere when I
was merging it all.
Signed-off-by: default avatarAlan Cox <alan@redhat.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
      99f1f534
    • Tony Battersby's avatar
      [SCSI] sym53c8xx: fix "irq X: nobody cared" regression · cedefa13
      Tony Battersby authored 
      The patch described by the following excerpt from ChangeLog-2.6.24-rc1
eventually causes a "irq X: nobody cared" error after a while:

commit 99c9e0a1
Author: Matthew Wilcox <matthew@wil.cx>
Date:   Fri Oct 5 15:55:12 2007 -0400

    [SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONE

After this happens, the kernel disables the IRQ, causing the SCSI card
to stop working until the next reboot.  The problem is caused by the
interrupt handler returning IRQ_NONE instead of IRQ_HANDLED after
handling an interrupt-on-the-fly (INTF) condition.  The following patch
fixes the problem.
Signed-off-by: default avatarTony Battersby <tonyb@cybernetics.com>
Acked-by: default avatarMatthew Wilcox <willy@linux.intel.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
      cedefa13
    • James Bottomley's avatar
      [SCSI] dpt_i2o: driver is only 32 bit so don't set 64 bit DMA mask · c80ddf00
      James Bottomley authored 
      This fixes a potential corruption bug where the truncation would cause
reading or writing to the wrong memory area on machines with >4GB of
main memory.

Cc: Stable Kernel Tree <stable@kernel.org>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
      c80ddf00
    • Tony Battersby's avatar
      [SCSI] sym53c8xx: fix free_irq() regression · 7ee2413c
      Tony Battersby authored 
      The following commit changed the pointer passed to request_irq(), but
failed to change the pointer passed to free_irq():

commit 99c9e0a1
Author: Matthew Wilcox <matthew@wil.cx>
Date:   Fri Oct 5 15:55:12 2007 -0400

    [SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONE

    ...

The result is that free_irq() doesn't actually take any action.  This
patch fixes it.
Signed-off-by: default avatarTony Battersby <tonyb@cybernetics.com>
Acked-by: default avatarChristoph Hellwig <hch@infradead.org>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
      7ee2413c
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86 · 3e3b3916
      Linus Torvalds authored 
      * git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  x86: fix "Kernel panic - not syncing: IO-APIC + timer doesn't work!"
  genirq: revert lazy irq disable for simple irqs
  x86: also define AT_VECTOR_SIZE_ARCH
  x86: kprobes bugfix
  x86: jprobe bugfix
  timer: kernel/timer.c section fixes
  genirq: add unlocked version of set_irq_handler()
  clockevents: fix reprogramming decision in oneshot broadcast
  oprofile: op_model_athlon.c support for AMD family 10h barcelona performance counters
      3e3b3916
    • Ingo Molnar's avatar
      x86: fix "Kernel panic - not syncing: IO-APIC + timer doesn't work!" · 4aae0702
      Ingo Molnar authored 
      this is the tale of a full day spent debugging an ancient but elusive bug.

after booting up thousands of random .config kernels, i finally happened
to generate a .config that produced the following rare bootup failure
on 32-bit x86:

| ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
| ..MP-BIOS bug: 8254 timer not connected to IO-APIC
| ...trying to set up timer (IRQ0) through the 8259A ...  failed.
| ...trying to set up timer as Virtual Wire IRQ... failed.
| ...trying to set up timer as ExtINT IRQ... failed :(.
| Kernel panic - not syncing: IO-APIC + timer doesn't work!  Boot with apic=debug
| and send a report.  Then try booting with the 'noapic' option

this bug has been reported many times during the years, but it was never
reproduced nor fixed.

the bug that i hit was extremely sensitive to .config details.

First i did a .config-bisection - suspecting some .config detail.
That led to CONFIG_X86_MCE: enabling X86_MCE magically made the bug disappear
and the system would boot up just fine.

Debugging my way through the MCE code ended up identifying two unlikely
candidates: the thing that made a real difference to the hang was that
X86_MCE did two printks:

 Intel machine check architecture supported.
 Intel machine check reporting enabled on CPU#1.

Adding the same printks to a !CONFIG_X86_MCE kernel made the bug go away!

this left timing as the main suspect: i experimented with adding various
udelay()s to the arch/x86/kernel/io_apic_32.c:check_timer() function, and
the race window turned out to be narrower than 30 microseconds (!).

That made debugging especially funny, debugging without having printk
ability before the bug hits is ... interesting ;-)

eventually i started suspecting IRQ activities - those are pretty much the
only thing that happen this early during bootup and have the timescale of
a few dozen microseconds. Also, check_timer() changes the IRQ hardware
in various creative ways, so the main candidate became IRQ0 interaction.

i've added a counter to track timer irqs (on which core they arrived, at
what exact time, etc.) and found that no timer IRQ would arrive after the
bug condition hits - even if we re-enable IRQ0 and re-initialize the i8259A,
but that we'd get a small number of timer irqs right around the time when we
call the check_timer() function.

Eventually i got the following backtrace triggered from debug code in the
timer interrupt:

...trying to set up timer as Virtual Wire IRQ... failed.
...trying to set up timer as ExtINT IRQ...
Pid: 1, comm: swapper Not tainted (2.6.24-rc5 #57)
EIP: 0060:[<c044d57e>] EFLAGS: 00000246 CPU: 0
EIP is at _spin_unlock_irqrestore+0x5/0x1c
EAX: c0634178 EBX: 00000000 ECX: c4947d63 EDX: 00000246
ESI: 00000002 EDI: 00010031 EBP: c04e0f2e ESP: f7c41df4
 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
 CR0: 8005003b CR2: ffe04000 CR3: 00630000 CR4: 000006d0
 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
 DR6: ffff0ff0 DR7: 00000400
  [<c05f5784>] setup_IO_APIC+0x9c3/0xc5c

the spin_unlock() was called from init_8259A(). Wait ... we have an IRQ0
entry while we are in the middle of setting up the local APIC, the i8259A
and the PIT??

That is certainly not how it's supposed to work! check_timer() was supposed
to be called with irqs turned off - but this eroded away sometime in the
past. This code would still work most of the time because this code runs
very quickly, but just the right timing conditions are present and IRQ0
hits in this small, ~30 usecs window, timer irqs stop and the system does
not boot up. Also, given how early this is during bootup, the hang is
very deterministic - but it would only occur on certain machines (and
certain configs).

The fix was quite simple: disable/restore interrupts properly in this
function. With that in place the test-system now boots up just fine.

(64-bit x86 io_apic_64.c had the same bug.)

Phew! One down, only 1500 other kernel bugs are left ;-)
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      4aae0702
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7