- 05 Aug, 2018 8 commits
-
-
Nicolai Stange authored
For VMEXITs caused by external interrupts, vmx_handle_external_intr() indirectly calls into the interrupt handlers through the host's IDT. It follows that these interrupts get accounted for in the kvm_cpu_l1tf_flush_l1d per-cpu flag. The subsequently executed vmx_l1d_flush() will thus be aware that some interrupts have happened and conduct a L1d flush anyway. Setting l1tf_flush_l1d from vmx_handle_external_intr() isn't needed anymore. Drop it. Signed-off-by:
Nicolai Stange <nstange@suse.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Nicolai Stange authored
The last missing piece to having vmx_l1d_flush() take interrupts after VMEXIT into account is to set the kvm_cpu_l1tf_flush_l1d per-cpu flag on irq entry. Issue calls to kvm_set_cpu_l1tf_flush_l1d() from entering_irq(), ipi_entering_ack_irq(), smp_reschedule_interrupt() and uv_bau_message_interrupt(). Suggested-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Nicolai Stange authored
The next patch in this series will have to make the definition of irq_cpustat_t available to entering_irq(). Inclusion of asm/hardirq.h into asm/apic.h would cause circular header dependencies like asm/smp.h asm/apic.h asm/hardirq.h linux/irq.h linux/topology.h linux/smp.h asm/smp.h or linux/gfp.h linux/mmzone.h asm/mmzone.h asm/mmzone_64.h asm/smp.h asm/apic.h asm/hardirq.h linux/irq.h linux/irqdesc.h linux/kobject.h linux/sysfs.h linux/kernfs.h linux/idr.h linux/gfp.h and others. This causes compilation errors because of the header guards becoming effective in the second inclusion: symbols/macros that had been defined before wouldn't be available to intermediate headers in the #include chain anymore. A possible workaround would be to move the definition of irq_cpustat_t into its own header and include that from both, asm/hardirq.h and asm/apic.h. However, this wouldn't solve the real problem, namely asm/harirq.h unnecessarily pulling in all the linux/irq.h cruft: nothing in asm/hardirq.h itself requires it. Also, note that there are some other archs, like e.g. arm64, which don't have that #include in their asm/hardirq.h. Remove the linux/irq.h #include from x86' asm/hardirq.h. Fix resulting compilation errors by adding appropriate #includes to *.c files as needed. Note that some of these *.c files could be cleaned up a bit wrt. to their set of #includes, but that should better be done from separate patches, if at all. Signed-off-by: -
Nicolai Stange authored
Part of the L1TF mitigation for vmx includes flushing the L1D cache upon VMENTRY. L1D flushes are costly and two modes of operations are provided to users: "always" and the more selective "conditional" mode. If operating in the latter, the cache would get flushed only if a host side code path considered unconfined had been traversed. "Unconfined" in this context means that it might have pulled in sensitive data like user data or kernel crypto keys. The need for L1D flushes is tracked by means of the per-vcpu flag l1tf_flush_l1d. KVM exit handlers considered unconfined set it. A vmx_l1d_flush() subsequently invoked before the next VMENTER will conduct a L1d flush based on its value and reset that flag again. Currently, interrupts delivered "normally" while in root operation between VMEXIT and VMENTER are not taken into account. Part of the reason is that these don't leave any traces and thus, the vmx code is unable to tell if any such has happened. As proposed by Paolo Bonzini, prepare for tracking all interrupts by introducing a new per-cpu flag, "kvm_cpu_l1tf_flush_l1d". It will be in strong analogy to the per-vcpu ->l1tf_flush_l1d. A later patch will make interrupt handlers set it. For the sake of cache locality, group kvm_cpu_l1tf_flush_l1d into x86' per-cpu irq_cpustat_t as suggested by Peter Zijlstra. Provide the helpers kvm_set_cpu_l1tf_flush_l1d(), kvm_clear_cpu_l1tf_flush_l1d() and kvm_get_cpu_l1tf_flush_l1d(). Make them trivial resp. non-existent for !CONFIG_KVM_INTEL as appropriate. Let vmx_l1d_flush() handle kvm_cpu_l1tf_flush_l1d in the same way as l1tf_flush_l1d. Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Nicolai Stange authored
An upcoming patch will extend KVM's L1TF mitigation in conditional mode to also cover interrupts after VMEXITs. For tracking those, stores to a new per-cpu flag from interrupt handlers will become necessary. In order to improve cache locality, this new flag will be added to x86's irq_cpustat_t. Make some space available there by shrinking the ->softirq_pending bitfield from 32 to 16 bits: the number of bits actually used is only NR_SOFTIRQS, i.e. 10. Suggested-by:
-
Nicolai Stange authored
Currently, vmx_vcpu_run() checks if l1tf_flush_l1d is set and invokes vmx_l1d_flush() if so. This test is unncessary for the "always flush L1D" mode. Move the check to vmx_l1d_flush()'s conditional mode code path. Notes: - vmx_l1d_flush() is likely to get inlined anyway and thus, there's no extra function call. - This inverts the (static) branch prediction, but there hadn't been any explicit likely()/unlikely() annotations before and so it stays as is. Signed-off-by:
-
Nicolai Stange authored
The vmx_l1d_flush_always static key is only ever evaluated if vmx_l1d_should_flush is enabled. In that case however, there are only two L1d flushing modes possible: "always" and "conditional". The "conditional" mode's implementation tends to require more sophisticated logic than the "always" mode. Avoid inverted logic by replacing the 'vmx_l1d_flush_always' static key with a 'vmx_l1d_flush_cond' one. There is no change in functionality. Signed-off-by:
-
Nicolai Stange authored
vmx_l1d_flush() gets invoked only if l1tf_flush_l1d is true. There's no point in setting l1tf_flush_l1d to true from there again. Signed-off-by:
-
- 24 Jul, 2018 1 commit
-
-
Josh Poimboeuf authored
If SMT is disabled in BIOS, the CPU code doesn't properly detect it. The /sys/devices/system/cpu/smt/control file shows 'on', and the 'l1tf' vulnerabilities file shows SMT as vulnerable. Fix it by forcing 'cpu_smt_control' to CPU_SMT_NOT_SUPPORTED in such a case. Unfortunately the detection can only be done after bringing all the CPUs online, so we have to overwrite any previous writes to the variable. Reported-by:
Joe Mario <jmario@redhat.com> Tested-by:
Jiri Kosina <jkosina@suse.cz> Fixes: f048c399 ("x86/topology: Provide topology_smt_supported()") Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
-
- 19 Jul, 2018 2 commits
-
-
Tony Luck authored
Fix spelling and other typos Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Nicolai Stange authored
The slow path in vmx_l1d_flush() reads from vmx_l1d_flush_pages in order to evict the L1d cache. However, these pages are never cleared and, in theory, their data could be leaked. More importantly, KSM could merge a nested hypervisor's vmx_l1d_flush_pages to fewer than 1 << L1D_CACHE_ORDER host physical pages and this would break the L1d flushing algorithm: L1D on x86_64 is tagged by physical addresses. Fix this by initializing the individual vmx_l1d_flush_pages with a different pattern each. Rename the "empty_zp" asm constraint identifier in vmx_l1d_flush() to "flush_pages" to reflect this change. Fixes: a47dd5f0 ("x86/KVM/VMX: Add L1D flush algorithm") Signed-off-by:
-
- 15 Jul, 2018 1 commit
-
-
Jiri Kosina authored
pfn_modify_allowed() and arch_has_pfn_modify_check() are outside of the !__ASSEMBLY__ section in include/asm-generic/pgtable.h, which confuses assembler on archs that don't have __HAVE_ARCH_PFN_MODIFY_ALLOWED (e.g. ia64) and breaks build: include/asm-generic/pgtable.h: Assembler messages: include/asm-generic/pgtable.h:538: Error: Unknown opcode `static inline bool pfn_modify_allowed(unsigned long pfn,pgprot_t prot)' include/asm-generic/pgtable.h:540: Error: Unknown opcode `return true' include/asm-generic/pgtable.h:543: Error: Unknown opcode `static inline bool arch_has_pfn_modify_check(void)' include/asm-generic/pgtable.h:545: Error: Unknown opcode `return false' arch/ia64/kernel/entry.S:69: Error: `mov' does not fit into bundle Move those two static inlines into the !__ASSEMBLY__ section so that they don't confuse the asm build pass. Fixes: 42e4089c ("x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings") Signed-off-by:
-
- 13 Jul, 2018 11 commits
-
-
Thomas Gleixner authored
Add documentation for the L1TF vulnerability and the mitigation mechanisms: - Explain the problem and risks - Document the mitigation mechanisms - Document the command line controls - Document the sysfs files Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20180713142323.287429944@linutronix.de
-
Jiri Kosina authored
Introduce the 'l1tf=' kernel command line option to allow for boot-time switching of mitigation that is used on processors affected by L1TF. The possible values are: full Provides all available mitigations for the L1TF vulnerability. Disables SMT and enables all mitigations in the hypervisors. SMT control via /sys/devices/system/cpu/smt/control is still possible after boot. Hypervisors will issue a warning when the first VM is started in a potentially insecure configuration, i.e. SMT enabled or L1D flush disabled. full,force Same as 'full', but disables SMT control. Implies the 'nosmt=force' command line option. sysfs control of SMT and the hypervisor flush control is disabled. flush Leaves SMT enabled and enables the conditional hypervisor mitigation. Hypervisors will issue a warning when the first VM is started in a potentially insecure configuration, i.e. SMT enabled or L1D flush disabled. flush,nosmt Disables SMT and enables the conditional hypervisor mitigation. SMT control via /sys/devices/system/cpu/smt/control is still possible after boot. If SMT is reenabled or flushing disabled at runtime hypervisors will issue a warning. flush,nowarn Same as 'flush', but hypervisors will not warn when a VM is started in a potentially insecure configuration. off Disables hypervisor mitigations and doesn't emit any warnings. Default is 'flush'. Let KVM adhere to these semantics, which means: - 'lt1f=full,force' : Performe L1D flushes. No runtime control possible. - 'l1tf=full' - 'l1tf-flush' - 'l1tf=flush,nosmt' : Perform L1D flushes and warn on VM start if SMT has been runtime enabled or L1D flushing has been run-time enabled - 'l1tf=flush,nowarn' : Perform L1D flushes and no warnings are emitted. - 'l1tf=off' : L1D flushes are not performed and no warnings are emitted. KVM can always override the L1D flushing behavior using its 'vmentry_l1d_flush' module parameter except when lt1f=full,force is set. This makes KVM's private 'nosmt' option redundant, and as it is a bit non-systematic anyway (this is something to control globally, not on hypervisor level), remove that option. Add the missing Documentation entry for the l1tf vulnerability sysfs file while at it. Signed-off-by: -
Thomas Gleixner authored
The CPU_SMT_NOT_SUPPORTED state is set (if the processor does not support SMT) when the sysfs SMT control file is initialized. That was fine so far as this was only required to make the output of the control file correct and to prevent writes in that case. With the upcoming l1tf command line parameter, this needs to be set up before the L1TF mitigation selection and command line parsing happens. Signed-off-by:
-
Jiri Kosina authored
The L1TF mitigation will gain a commend line parameter which allows to set a combination of hypervisor mitigation and SMT control. Expose cpu_smt_disable() so the command line parser can tweak SMT settings. [ tglx: Split out of larger patch and made it preserve an already existing force off state ] Signed-off-by:
-
Thomas Gleixner authored
All mitigation modes can be switched at run time with a static key now: - Use sysfs_streq() instead of strcmp() to handle the trailing new line from sysfs writes correctly. - Make the static key management handle multiple invocations properly. - Set the module parameter file to RW Signed-off-by:
-
Thomas Gleixner authored
Writes to the parameter files are not serialized at the sysfs core level, so local serialization is required. Signed-off-by:
-
Thomas Gleixner authored
Avoid the conditional in the L1D flush control path. Signed-off-by:
-
Thomas Gleixner authored
In preparation of allowing run time control for L1D flushing, move the setup code to the module parameter handler. In case of pre module init parsing, just store the value and let vmx_init() do the actual setup after running kvm_init() so that enable_ept is having the correct state. During run-time invoke it directly from the parameter setter to prepare for run-time control. Signed-off-by:
-
Thomas Gleixner authored
If Extended Page Tables (EPT) are disabled or not supported, no L1D flushing is required. The setup function can just avoid setting up the L1D flush for the EPT=n case. Invoke it after the hardware setup has be done and enable_ept has the correct state and expose the EPT disabled state in the mitigation status as well. Signed-off-by:
-
Thomas Gleixner authored
The VMX module parameter to control the L1D flush should become writeable. The MSR list is set up at VM init per guest VCPU, but the run time switching is based on a static key which is global. Toggling the MSR list at run time might be feasible, but for now drop this optimization and use the regular MSR write to make run-time switching possible. The default mitigation is the conditional flush anyway, so for extra paranoid setups this will add some small overhead, but the extra code executed is in the noise compared to the flush itself. Aside of that the EPT disabled case is not handled correctly at the moment and the MSR list magic is in the way for fixing that as well. If it's really providing a significant advantage, then this needs to be revisited after the code is correct and the control is writable. Signed-off-by:
-
Thomas Gleixner authored
Store the effective mitigation of VMX in a status variable and use it to report the VMX state in the l1tf sysfs file. Signed-off-by:
-
- 09 Jul, 2018 1 commit
-
-
Thomas Gleixner authored
Writing 'off' to /sys/devices/system/cpu/smt/control offlines all SMT siblings. Writing 'on' merily enables the abilify to online them, but does not online them automatically. Make 'on' more useful by onlining all offline siblings. Signed-off-by:
-
- 04 Jul, 2018 10 commits
-
-
Konrad Rzeszutek Wilk authored
If the L1D flush module parameter is set to 'always' and the IA32_FLUSH_CMD MSR is available, optimize the VMENTER code with the MSR save list. Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
The IA32_FLUSH_CMD MSR needs only to be written on VMENTER. Extend add_atomic_switch_msr() with an entry_only parameter to allow storing the MSR only in the guest (ENTRY) MSR array. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
This allows to load a different number of MSRs depending on the context: VMEXIT or VMENTER. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
.. to help find the MSR on either the guest or host MSR list. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
There is no semantic change but this change allows an unbalanced amount of MSRs to be loaded on VMEXIT and VMENTER, i.e. the number of MSRs to save or restore on VMEXIT or VMENTER may be different. Signed-off-by:
-
Paolo Bonzini authored
Add the logic for flushing L1D on VMENTER. The flush depends on the static key being enabled and the new l1tf_flush_l1d flag being set. The flags is set: - Always, if the flush module parameter is 'always' - Conditionally at: - Entry to vcpu_run(), i.e. after executing user space - From the sched_in notifier, i.e. when switching to a vCPU thread. - From vmexit handlers which are considered unsafe, i.e. where sensitive data can be brought into L1D: - The emulator, which could be a good target for other speculative execution-based threats, - The MMU, which can bring host page tables in the L1 cache. - External interrupts - Nested operations that require the MMU (see above). That is vmptrld, vmptrst, vmclear,vmwrite,vmread. - When handling invept,invvpid [ tglx: Split out from combo patch and reduced to a single flag ] Signed-off-by: -
Paolo Bonzini authored
336996-Speculative-Execution-Side-Channel-Mitigations.pdf defines a new MSR (IA32_FLUSH_CMD aka 0x10B) which has similar write-only semantics to other MSRs defined in the document. The semantics of this MSR is to allow "finer granularity invalidation of caching structures than existing mechanisms like WBINVD. It will writeback and invalidate the L1 data cache, including all cachelines brought in by preceding instructions, without invalidating all caches (eg. L2 or LLC). Some processors may also invalidate the first level level instruction cache on a L1D_FLUSH command. The L1 data and instruction caches may be shared across the logical processors of a core." Use it instead of the loop based L1 flush algorithm. A copy of this document is available at https://bugzilla.kernel.org/show_bug.cgi?id=199511 [ tglx: Avoid allocating pages when the MSR is available ] Signed-off-by:
-
Paolo Bonzini authored
To mitigate the L1 Terminal Fault vulnerability it's required to flush L1D on VMENTER to prevent rogue guests from snooping host memory. CPUs will have a new control MSR via a microcode update to flush L1D with a single MSR write, but in the absence of microcode a fallback to a software based flush algorithm is required. Add a software flush loop which is based on code from Intel. [ tglx: Split out from combo patch ] [ bpetkov: Polish the asm code ] Signed-off-by:
-
Konrad Rzeszutek Wilk authored
Add a mitigation mode parameter "vmentry_l1d_flush" for CVE-2018-3620, aka L1 terminal fault. The valid arguments are: - "always" L1D cache flush on every VMENTER. - "cond" Conditional L1D cache flush, explained below - "never" Disable the L1D cache flush mitigation "cond" is trying to avoid L1D cache flushes on VMENTER if the code executed between VMEXIT and VMENTER is considered safe, i.e. is not bringing any interesting information into L1D which might exploited. [ tglx: Split out from a larger patch ] Signed-off-by:
-
Konrad Rzeszutek Wilk authored
If the L1TF CPU bug is present we allow the KVM module to be loaded as the major of users that use Linux and KVM have trusted guests and do not want a broken setup. Cloud vendors are the ones that are uncomfortable with CVE 2018-3620 and as such they are the ones that should set nosmt to one. Setting 'nosmt' means that the system administrator also needs to disable SMT (Hyper-threading) in the BIOS, or via the 'nosmt' command line parameter, or via the /sys/devices/system/cpu/smt/control. See commit 05736e4a ("cpu/hotplug: Provide knobs to control SMT"). Other mitigations are to use task affinity, cpu sets, interrupt binding, etc - anything to make sure that _only_ the same guests vCPUs are running on sibling threads. Signed-off-by:
-
- 02 Jul, 2018 2 commits
-
-
Thomas Gleixner authored
Due to the way Machine Check Exceptions work on X86 hyperthreads it's required to boot up _all_ logical cores at least once in order to set the CR4.MCE bit. So instead of ignoring the sibling threads right away, let them boot up once so they can configure themselves. After they came out of the initial boot stage check whether its a "secondary" sibling and cancel the operation which puts the CPU back into offline state. Reported-by:
Dave Hansen <dave.hansen@intel.com> Signed-off-by:
-
Thomas Gleixner authored
Dave Hansen reported, that it's outright dangerous to keep SMT siblings disabled completely so they are stuck in the BIOS and wait for SIPI. The reason is that Machine Check Exceptions are broadcasted to siblings and the soft disabled sibling has CR4.MCE = 0. If a MCE is delivered to a logical core with CR4.MCE = 0, it asserts IERR#, which shuts down or reboots the machine. The MCE chapter in the SDM contains the following blurb: Because the logical processors within a physical package are tightly coupled with respect to shared hardware resources, both logical processors are notified of machine check errors that occur within a given physical processor. If machine-check exceptions are enabled when a fatal error is reported, all the logical processors within a physical package are dispatched to the machine-check exception handler. If machine-check exceptions are disabled, the logical processors enter the shutdown state and assert the IERR# signal. When enabling machine-check exceptions, the MCE flag in control register CR4 should be set for each logical processor. Reverting the commit which ignores siblings at enumeration time solves only half of the problem. The core cpuhotplug logic needs to be adjusted as well. This thoughtful engineered mechanism also turns the boot process on all Intel HT enabled systems into a MCE lottery. MCE is enabled on the boot CPU before the secondary CPUs are brought up. Depending on the number of physical cores the window in which this situation can happen is smaller or larger. On a HSW-EX it's about 750ms: MCE is enabled on the boot CPU: [ 0.244017] mce: CPU supports 22 MCE banks The corresponding sibling #72 boots: [ 1.008005] .... node #0, CPUs: #72 That means if an MCE hits on physical core 0 (logical CPUs 0 and 72) between these two points the machine is going to shutdown. At least it's a known safe state. It's obvious that the early boot can be hit by an MCE as well and then runs into the same situation because MCEs are not yet enabled on the boot CPU. But after enabling them on the boot CPU, it does not make any sense to prevent the kernel from recovering. Adjust the nosmt kernel parameter documentation as well. Reverts: 2207def7 ("x86/apic: Ignore secondary threads if nosmt=force") Reported-by:
-
- 29 Jun, 2018 1 commit
-
-
Michal Hocko authored
Jan has noticed that pte_pfn and co. resp. pfn_pte are incorrect for CONFIG_PAE because phys_addr_t is wider than unsigned long and so the pte_val reps. shift left would get truncated. Fix this up by using proper types. Fixes: 6b28baca ("x86/speculation/l1tf: Protect PROT_NONE PTEs against speculation") Reported-by:
Jan Beulich <JBeulich@suse.com> Signed-off-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz>
-
- 27 Jun, 2018 1 commit
-
-
Vlastimil Babka authored
The PAE 3-level paging code currently doesn't mitigate L1TF by flipping the offset bits, and uses the high PTE word, thus bits 32-36 for type, 37-63 for offset. The lower word is zeroed, thus systems with less than 4GB memory are safe. With 4GB to 128GB the swap type selects the memory locations vulnerable to L1TF; with even more memory, also the swap offfset influences the address. This might be a problem with 32bit PAE guests running on large 64bit hosts. By continuing to keep the whole swap entry in either high or low 32bit word of PTE we would limit the swap size too much. Thus this patch uses the whole PAE PTE with the same layout as the 64bit version does. The macros just become a bit tricky since they assume the arch-dependent swp_entry_t to be 32bit. Signed-off-by:
-
- 22 Jun, 2018 1 commit
-
-
Borislav Petkov authored
The TOPOEXT reenablement is a workaround for broken BIOSen which didn't enable the CPUID bit. amd_get_topology_early(), however, relies on that bit being set so that it can read out the CPUID leaf and set smp_num_siblings properly. Move the reenablement up to early_init_amd(). While at it, simplify amd_get_topology_early(). Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
- 21 Jun, 2018 1 commit
-
-
Konrad Rzeszutek Wilk authored
336996-Speculative-Execution-Side-Channel-Mitigations.pdf defines a new MSR (IA32_FLUSH_CMD) which is detected by CPUID.7.EDX[28]=1 bit being set. This new MSR "gives software a way to invalidate structures with finer granularity than other architectual methods like WBINVD." A copy of this document is available at https://bugzilla.kernel.org/show_bug.cgi?id=199511Signed-off-by:
-
