- 03 Jan, 2014 40 commits
-
-
Johan Hovold authored
Only wake up MSR wait queue on actual modem-status changes. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Clean up interrupt completion handler somewhat. Signed-off-by:
-
Johan Hovold authored
Switch to the generic TIOCMIWAIT implementation which does not suffer from the races involved when using the deprecated sleep_on functions. Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Johan Hovold authored
Only wake up MSR wait queue on actual modem-status changes. Signed-off-by:
-
Johan Hovold authored
Make sure the TIOCMIWAIT mask is always honoured. The CH341 interrupt status has a multiple-status changed flag which indicates that multiple status changes has occurred since last interrupt event. Unfortunately, if the final status is the same, there appears to be no way to determine which signal(s) has changed (an even number of times). This means that the multiple-status flag should not be used in TIOCMIWAIT as it leads to the signal mask argument being ignored (e.g. TIOCMIWAIT could return if DSR changes twice, even though the user only cares about carrier changes). Signed-off-by:
-
Johan Hovold authored
Clean up line-status handling. Signed-off-by:
-
Johan Hovold authored
Refactor line-status handling. Signed-off-by:
-
Johan Hovold authored
Switch to the generic TIOCMIWAIT implementation which does not suffer from the races involved when using the deprecated sleep_on functions. Acked-by:
-
Johan Hovold authored
Only wake up MSR wait queue on actual modem-status changes. Signed-off-by:
-
Johan Hovold authored
Clean up protocol definitions. Signed-off-by:
-
Johan Hovold authored
Fix ring-indicator (RI) status-bit definition, which was defined as CTS, effectively preventing RI-changes from being detected while reporting false RI status. This bug predates git. Cc: stable@vger.kernel.org Signed-off-by:
-
Johan Hovold authored
Switch to the generic TIOCMIWAIT implementation which does not suffer from the races involved when using the deprecated sleep_on functions. Acked-by:
-
Johan Hovold authored
Only wake up MSR wait queue on actual modem-status changes. Signed-off-by:
-
Johan Hovold authored
Clean up line-status handling somewhat. Get tty-reference only when actually needed. Signed-off-by:
-
Johan Hovold authored
Declare constant device-type data as const. Signed-off-by:
-
Mikhail Zolotaryov authored
The USB storage operation of Nokia Asha 502 Dual SIM smartphone running Asha Platform 1.1.1 is unreliable in respect of data consistency (i.e. transfered files are corrupted). A similar issue is described here: http://discussions.nokia.com/t5/Asha-and-other-Nokia-Series-30/Nokia-301-USB-transfers-and-corrupted-files/td-p/1974170 The workaround is (MAX_SECTORS_64): rmmod usb_storage && modprobe usb_storage quirks=0421:06aa:m The patch adds the tested device to the unusual list permanently. Signed-off-by:
Mikhail Zolotaryov <lebon@lebon.org.ua> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Rahul Bedarkar authored
Add support for iBall 3.5G connect usb modem. $lsusb Bus 002 Device 006: ID 1c9e:9605 OMEGA TECHNOLOGY $usb-devices T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9605 Rev=00.00 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber=1234567890ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Signed-off-by:
Rahul Bedarkar <rahulbedarkar89@gmail.com> Suggested-by:
Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Rahul Bedarkar authored
Signed-off-by:
-
Rahul Bedarkar authored
Signed-off-by:
-
Rahul Bedarkar authored
Signed-off-by:
-
Rahul Bedarkar authored
fix spelling mistake in comment Signed-off-by:
-
Rahul Bedarkar authored
Add guard macro to driver/usb/chipidea/ci_hdrc_imx.h Signed-off-by:
-
Sachin Kamat authored
Commit c02cecb9 ("ARM: orion: move platform_data definitions") moved the file to the current location but forgot to remove the pointer to its previous location. Clean it up. While at it also change the header file protection macros appropriately. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Rahul Bedarkar authored
Signed-off-by:
-
Johan Hovold authored
Use the new C_CMSPAR macro for consistency. Signed-off-by:
-
Andrew Lunn authored
Add a driver which supports the following Moxa USB to serial converters: * 2 ports : UPort 1250, UPort 1250I * 4 ports : UPort 1410, UPort 1450, UPort 1450I * 8 ports : UPort 1610-8, UPort 1650-8 * 16 ports : UPort 1610-16, UPort 1650-16 The UPORT devices don't directly fit the USB serial model. USB serial assumes a bulk in/out endpoint pair per serial port. Thus a dual port USB serial device is expected to have two bulk in/out pairs. The Moxa UPORT only has one pair for data transfer and places a header on each transfer over the endpoint indicating for which port the transfer relates to. There is a second endpoint pair for events, such as modem control lines changing state, setting baud rates etc. Again, a multiplexing header is used on these endpoints. Some ports need to have a kfifo explicitly allocated since the framework does not allocate one if there is no associated endpoints. The framework will however free it on unload of the module. All data transfers are made on port0, yet the locks are taken on PortN. urb->context points to PortN, even though the URB is for port0. Where possible, code from the generic driver is called. However mxuport_process_read_urb_data() is mostly a cut/paste of usb_serial_generic_process_read_urb(). The driver will attempt to load firmware from userspace and compare the available version and the running version. If the available version is newer, it will be download into RAM of the device and started. This is optional and the driver appears to work O.K. with older firmware in the devices ROM. This driver is based on the MOXA driver and retains MOXAs copyright. [jhovold@gmail.com: fix get_fw_version error path and some style issues] Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
-
Andrew Lunn authored
Add the missing C_CMSPAR(tty) macro. Signed-off-by:
-
Johan Hovold authored
Use direct baud-rate encoding rather than divisors for supported baud rates. This restores the way baud rates were set prior to commit 8d48fdf6 ("USB: PL2303: correctly handle baudrates above 115200") which added divisor encoding, but also switched to the new encoding method for all baudrates above 115200. As noted by Frank Schäfer <fschaefer.oss@googlemail.com>, baud rate 500k was later errounously added to the supported baud-rate table although it can only be set using divisors. Note that the current implementation could easily be extended to support arbitrary non-standard baud rates using divisors (e.g. by falling back to divisors when the table lookup fails). Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
-
Johan Hovold authored
Add helper function for direct baud-rate encoding. Signed-off-by:
-
Johan Hovold authored
Refactor baud-rate divisor handling. Signed-off-by:
-
Johan Hovold authored
Enforce any baud-rate limits before doing table lookup. Signed-off-by:
-
Johan Hovold authored
Refactor supported baud-rate table lookup. Signed-off-by:
-
Johan Hovold authored
Rename baud-rate encoding function to match tty naming. Signed-off-by:
-
Johan Hovold authored
Encode all device-type specifics in a struct rather than testing for device type and spreading such information throughout the driver. Signed-off-by:
-
Johan Hovold authored
Add quirk for legacy devices (type 0 and 1) rather than testing on device type throughout the driver. Signed-off-by:
-
Johan Hovold authored
Merge types 0 and 1, whose differences are unknown and have always been treated the same. Add TYPE_-prefix to both types. Test for TYPE_01 (rather than !TYPE_HX) for legacy device quirks. Signed-off-by:
-
Johan Hovold authored
Use speed_t for baud rates throughout. Signed-off-by:
-
Johan Hovold authored
Implement line-status handling for Siemens phones as a quirk rather than spreading such information all over the driver by matching on vendor and and product ids. Note that the SIEMENS_PRODUCT_ID_EF81, which was added after the line-status handling for the other Siemens phones was fixed, might also need this quirk. Signed-off-by:
-
Johan Hovold authored
Remove redundant get_line_request (the read back settings are never used). Signed-off-by:
-
Johan Hovold authored
Refactor and add error handling to line requests. Signed-off-by:
-
