- 26 Feb, 2018 26 commits
-
-
Gustavo A. R. Silva authored
Add suffix ULL to constant 7 in order to give the compiler complete information about the proper arithmetic to use. Notice that this constant is used in a context that expects an expression of type u64 (64 bits, unsigned). The expression dev->pdata->clk * 7 is currently being evaluated using 32-bit arithmetic. Addresses-Coverity-ID: 1271223 ("Unintentional integer overflow") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Masami Hiramatsu authored
Fixes vb2_vmalloc_get_userptr() to ioremap correct area. Since the current code does ioremap the page address, if the offset > 0, it does not do ioremap the last page and results in kernel panic. This fixes to pass the size + offset to ioremap so that ioremap can map correct area. Also, this uses __pfn_to_phys() to get the physical address of given PFN. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Reported-by:
Takao Orito <orito.takao@socionext.com> Reported-by:
Fumihiro ATSUMI <atsumi@infinitegra.co.jp> Reviewed-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Alexandre Courbot authored
v4l2_fh.h uses the IS_ENABLED() macro and thus should include kconfig.h. Signed-off-by:
Alexandre Courbot <acourbot@chromium.org> Signed-off-by:
-
Alexandre Courbot authored
The description for VIDIOC_PREPARE_BUF results in the following sentence: "...before actually enqueuing it, using the ioctl VIDIOC_QBUF, VIDIOC_DQBUF ioctl...". The intent is to only refer to VIDIOC_QBUF though, so fix this. Signed-off-by:
-
Hans Verkuil authored
The __v4l2_ctrl_modify_range is the unlocked variant, so the comment about taking a lock is obviously wrong. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Sakari Ailus authored
If buffers were prepared or queued and the buffers were released without starting the queue, the finish mem op (corresponding to the prepare mem op) was never called to the buffers. Before commit a136f59c there was no need to do this as in such a case the prepare mem op had not been called yet. Address the problem by explicitly calling finish mem op when the queue is stopped if the buffer is in either prepared or queued state. Fixes: a136f59c ("[media] vb2: Move buffer cache synchronisation to prepare from queue") Cc: stable@vger.kernel.org # for v4.13 and up Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Hans Verkuil authored
The vivid driver has two custom controls that change the behavior of RDS. Depending on the control setting the V4L2_CAP_READWRITE capability is toggled. However, after an earlier commit the capability was no longer set correctly. This is now fixed. Fixes: 9765a32c ("vivid: set device_caps in video_device") Signed-off-by:
-
Colin Ian King authored
Currently an out of range dev->nr is detected by just reporting the issue and later on an out-of-bounds read on array card occurs because of this. Fix this by checking the upper range of dev->nr with the size of array card (removes the hard coded size), move this check earlier and also exit with the error -ENOSYS to avoid the later out-of-bounds array read. Detected by CoverityScan, CID#711191 ("Out-of-bounds-read") Fixes: commit 02b20b0b ("V4L/DVB (12730): Add conexant cx25821 driver") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Niklas Söderlund authored
A recent change to the media_entity_to_video_device() macro breaks some use-cases for the macro due to a symbol collision. Before the change this worked: vdev = media_entity_to_video_device(link->sink->entity); While after the change it results in a compiler error "error: 'struct video_device' has no member named 'link'; did you mean 'lock'?". While the following still works after the change. struct media_entity *entity = link->sink->entity; vdev = media_entity_to_video_device(entity); Fix the collision by renaming the macro argument to '__entity'. Fixes: 69b925c5 ("media: v4l2-dev.h: add kernel-doc to two macros") Signed-off-by:Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
-
Christopher Díaz Riveros authored
Given the following definitions from s2255drv.c #define LINE_SZ_4CIFS_NTSC 640 #define LINE_SZ_2CIFS_NTSC 640 #define LINE_SZ_1CIFS_NTSC 320 and #define LINE_SZ_4CIFS_PAL 704 #define LINE_SZ_2CIFS_PAL 704 #define LINE_SZ_1CIFS_PAL 352 f->fmt.pix.width possible values can be reduced to LINE_SZ_4CIFS_NTSC or LINE_SZ_1CIFS_NTSC. This patch removes unneeded if else blocks in vidioc_try_fmt_vid_cap function. This issue was detected by using the Coccinelle software. Signed-off-by:
Christopher Díaz Riveros <chrisadr@gentoo.org> Signed-off-by:
-
Gustavo A. R. Silva authored
Fix inconsistent IS_ERR and PTR_ERR in vdic_get_ipu_resources. The proper pointer to be passed as argument is ch. This issue was detected with the help of Coccinelle. Fixes: 0b2e9e79 ("media: staging/imx: remove confusing IS_ERR_OR_NULL usage") Signed-off-by:
Steve Longerbeam <steve_longerbeam@mentor.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Gustavo A. R. Silva authored
Assign true or false to boolean variables instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by:
-
Gustavo Padovan authored
The link was showing both VIDIOC_QBUF, VIDIOC_DQBUF while it should show only VIDIOC_QBUF in this case. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.com> Acked-by:
-
Wei Yongjun authored
Fix to return error code -ENODEV from the dma_request_slave_channel() error handling case instead of 0, as done elsewhere in this function. rc can be overwrite to 0 by dmaengine_slave_config() in the for loop. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Ramesh Shanmugasundaram <Ramesh.shanmugasundaram@bp.renesas.com> Signed-off-by:
-
Ian Douglas Scott authored
Add support for a new USB ID in this driver. Signed-off-by:
Ian Douglas Scott <ian@iandouglasscott.com> [hans.verkuil@cisco.com: add commit message] Signed-off-by:
-
Shuah Khan authored
Replace GPL license statement with SPDX GPL-2.0 license identifier. Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Tomasz Figa authored
Currently the driver signals the source change event only in case of a midstream resolution change, however the initial format detection is also defined as a source change by the V4L2 codec API specification. Fix this by signaling the event after the initial header is parsed as well. Signed-off-by:
Tomasz Figa <tfiga@chromium.org> Reviewed-by:
Wu-Cheng Li <wuchengli@chromium.org> Signed-off-by:
-
Oliver Neukum authored
Quoting the original report: It looks like there is a double-free vulnerability in Linux usbtv driver on an error path of usbtv_probe function. When audio registration fails, usbtv_video_free function ends up freeing usbtv data structure, which gets freed the second time under usbtv_video_fail label. usbtv_audio_fail: usbtv_video_free(usbtv); => v4l2_device_put(&usbtv->v4l2_dev); => v4l2_device_put => kref_put => v4l2_device_release => usbtv_release (CALLBACK) => kfree(usbtv) (1st time) usbtv_video_fail: usb_set_intfdata(intf, NULL); usb_put_dev(usbtv->udev); kfree(usbtv); (2nd time) So, as we have refcounting, use it Reported-by:Yavuz, Tuba <tuba@ece.ufl.edu> Signed-off-by:
Oliver Neukum <oneukum@suse.com> CC: stable@vger.kernel.org Signed-off-by:
-
Xiongfeng Wang authored
gcc-8 reports drivers/media/media-device.c: In function 'media_device_get_topology': ./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified bound 64 equals destination size [-Wstringop-truncation] We need to use strlcpy() to make sure the dest string is nul-terminated. Signed-off-by:
Xiongfeng Wang <xiongfeng.wang@linaro.org> Acked-by:
-
Philipp Zabel authored
While the h.264 standard only allows up to 16 reference frames, the CODA firmware needs two more buffers: one to hold the currently decoded frame and one for the display frame. Adding the framebuffer needed by the driver for VDOA operation brings the total to a maximum of 19 internal framebuffers. Lift the current maximum of 17 internal framebuffers to allow playback of high profile streams that require more than 14 reference frames. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Arnd Bergmann authored
After the move of videobuf2 into the common directory, selecting the au0828 driver with CONFIG_V4L2 disabled started causing a link failure, as we now attempt to build videobuf2 but it still requires v4l2: ERROR: "v4l2_event_pending" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined! ERROR: "v4l2_fh_release" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined! ERROR: "video_devdata" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined! ERROR: "__tracepoint_vb2_buf_done" [drivers/media/common/videobuf/videobuf2-core.ko] undefined! ERROR: "__tracepoint_vb2_dqbuf" [drivers/media/common/videobuf/videobuf2-core.ko] undefined! ERROR: "v4l_vb2q_enable_media_source" [drivers/media/common/videobuf/videobuf2-core.ko] undefined! We want to be able to build the core au0828 support without V4L2, so this makes the 'select' conditional on V4L2, and refines the dependencies in VIDEO_AU0828_V4L2 so it can only be enabled in the exact conditions that have VIDEOBUF2_VMALLOC reachable. Fixes: 03fbdb2f ("media: move videobuf2 to drivers/media/common") Fixes: 05439b1a ("[media] media: au0828 - convert to use videobuf2") Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/media/platform/atmel/atmel-isc.c:338:19: warning: symbol 'fmt_configs_list' was not declared. Should it be static? Signed-off-by:
Wenyou Yang <wenyou.yang@microchip.com> Signed-off-by:
-
Philipp Zabel authored
Allow building this driver for other platforms under COMPILE_TEST. Suggested-by:
-
Philipp Zabel authored
Add support for the CodaHx4 VPU used on i.MX51. Decoding h.264, MPEG-4, and MPEG-2 video works, as well as encoding h.264. MPEG-4 encoding is not enabled, it currently produces visual artifacts. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Philipp Zabel authored
Add a compatible for the CodaHx4 VPU used on i.MX51. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Benjamin Gaignard authored
Add SPDX identifiers to files under stm32 directory Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by:
Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by:
-
- 23 Feb, 2018 14 commits
-
-
Mauro Carvalho Chehab authored
3 warning regressions: + drivers/media/i2c/ov13858.c: warning: cast to restricted __be32: => 1093:16 + drivers/media/i2c/ov13858.c: warning: incorrect type in assignment (different base types): => 1111:13 + drivers/media/i2c/ov13858.c: warning: incorrect type in initializer (different base types): => 1071:27 Signed-off-by: -
Hugues Fruchet authored
After a framerate update through s_frame_interval(), the new framerate was not taken into account when streaming, but was taken into account on next session. This was due to sensor->current_mode not updated accordingly to new framerate setting in ov5640_s_frame_interval(). Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
Hugues Fruchet authored
Fix module_param(virtual_channel) permissions. This problem was detected by checkpatch: $ scripts/checkpatch.pl -f drivers/media/i2c/ov5640.c ERROR: Use 4 digit octal (0777) not decimal permissions +module_param(virtual_channel, int, 0); Also add an error trace in case of virtual_channel not in the valid range of values. Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
Hugues Fruchet authored
Various typo & style fixes either detected by code review or checkpatch. Signed-off-by:
-
Hugues Fruchet authored
Add an error trace in ov5640_read_reg() in case of i2c_transfer() failure. Uniformize error traces using dev_err instead v4l2_err. Signed-off-by:
-
Hugues Fruchet authored
Add YUV422 encoded JPEG support. Signed-off-by:
-
Jacopo Mondi authored
ov7670 driver supports two optional properties supplied through platform data, but currently does not support any standard video interface property. Add support through OF parsing for 2 generic properties (vsync and hsync polarities) and for one custom property already supported through platform data to suppress pixel clock output during horizontal blanking. While at there, check return value of register writes in set_fmt function and rationalize spacings. Signal polarities and pixel clock blanking verified through scope and image capture. Signed-off-by:
-
Jacopo Mondi authored
Describe newly introduced OF properties for ov7670 image sensor. The driver supports two standard properties to configure synchronism signals polarities and one custom property already supported as platform data options to suppress pixel clock during horizontal blankings. Re-phrase child nodes description while at there. Signed-off-by:
-
Gustavo A. R. Silva authored
Cast fi->interval.numerator to u64 in order to avoid a potential integer overflow. This variable is being used in a context that expects an expression of type u64. Addresses-Coverity-ID: 1324146 ("Unintentional integer overflow") [Sakari Ailus: use do_div() to make this work on 32-bit systems] Signed-off-by: -
Akinobu Mita authored
The ov9650 driver currently only supports legacy platform data probe. This change adds device tree probing. There has been an attempt to add device tree support for ov9650 driver by Hugues Fruchet as a part of the patchset that adds support of OV9655 camera (http://www.spinics.net/lists/linux-media/msg117903.html), but it wasn't merged into mainline because creating a separate driver for OV9655 is preferred. This is very similar to Hugues's patch, but not supporting new device. Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Hugues Fruchet <hugues.fruchet@st.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Rob Herring <robh@kernel.org> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by:
-
Akinobu Mita authored
Now the ov9650 driver supports device tree probing. So this adds a device tree binding documentation. Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Hugues Fruchet <hugues.fruchet@st.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Reviewed-by:
-
Akinobu Mita authored
This adds an entry to the MAINTAINERS file for ov9650 driver. The following persons are added in this entry. * Sakari as a person who looks after media sensor driver patches * Sylwester as a module author * Myself as a person who has the hardware and can test the patches Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Hugues Fruchet <hugues.fruchet@st.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Rob Herring <robh@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
Assign true or false to boolean variables instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by:
-
Chiranjeevi Rapolu authored
Previously, the sensor, with default settings, was outputting SOF without data. This results in frame sync error on the receiver side. Now, configure the sensor to output SOF with MIPI data for all frames. This avoids possible null first frame on the bus. Signed-off-by:
Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Signed-off-by:
Tianshu Qiu <tian.shu.qiu@intel.com> Signed-off-by:
-
