With the introduction of iomap changes platform init code
fails for emu.c if CONFIG_OMAP3_EMU is selected:

arch/arm/mach-omap2/emu.c:35:8: error:
'L4_EMU_34XX_BASE' undeclared here (not in a function)
Signed-off-by: Tony Lindgren <tony@atomide.com>

Drivers should no longer use omap_read/write functions
but instead use ioremap + read/write functions.

As some USB legacy code is still shared between omap1 and
omap2420, let's limit the omap_read/write to plat/usb.h.

Note that the long term fix is to update the drivers to
use ioremap and read/write functions. That can now be
done as a separate patch series that is limited to the
USB drivers.

Also make sure the legacy omap1-keypad.c driver builds
if selected for 2420 based systems.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This is needed to minimize io.h so the SoC specific io.h
for ARMs can removed.

Note that minimal driver changes for DSS and RNG are needed to
include cpu.h for SoC detection macros.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Tony Lindgren <tony@atomide.com>

There's no need to have these defines in plat/io.h.

Note that we now need to ifdef omap_read/write calls
as they will be available for omap1 only.

While at it, clean up the includes to group them like
they typically are grouped.
Signed-off-by: Tony Lindgren <tony@atomide.com>

There's no need to have these in plat/io.h.

While at it, clean up the includes to group them
like they typically are grouped.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This way we can remove omap_read/write call from the GPIO driver
and remove include to linux/io.h.

Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We don't want to keep it in io.h as we want to remove io.h
for omap2+ for the common zImage support.
Signed-off-by: Tony Lindgren <tony@atomide.com>

These should be local to omap2/3/4.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This is only needed when using SRAM for framebuffer,
and the support for SRAM framebuffer is about to get
removed.

Otherwise we cannot move most of plat/io.h to be a local
iomap.h for mach-omap2.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>

Remove omap_{read,write}l() from the 24xx PM code.  The clocksource
code should now handle what this was supposed to do.

Tested on N800 -- but it's hard to say whether this fixes anything.
OMAP24xx static suspend path is currently broken, and this patch
doesn't change that.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Rob Herring <robherring2@gmail.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Flag single_channel in struct omap2_mcspi_device_config is not used
by drivers/spi/spi-omap2-mcspi.c so we may remove it from include/plat/mcspi.h
and affected board files.
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Now that most platforms don't need disable_fiq and arch_ret_to_user
macros, we can remove the empty macros or empty entry-macro.S files.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ryan Mallon <rmallon@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>

With the removal of disable_fiq on rpc and addition MULTI_IRQ_HANDLER,
entry-macro.S is no longer needed for platforms that select
MULTI_IRQ_HANDLER and the include of it can be conditional.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>

Only rpc uses disable_fiq macro. Change it to a run-time installed
default FIQ handler. The handler is installed before FIQ is enabled
so the behavior should be unchanged.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Nicolas Pitre <nico@linaro.org>

Only 3 platforms need arch_ret_to_user macro, so add ARCH_HAS_RET_TO_USER
kconfig option and make iop13xx, iop32x and iop33x select it.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Nicolas Pitre <nico@linaro.org>

One patch fixes an bug in the ARM/MSM IOMMU code which returned sucess
in the unmap function even when an error occured and the other patch
adds a workaround into the AMD IOMMU driver to better handle broken IVRS
ACPI tables (this patch fixes the case when a device is not listed in
the table but actually translated by the iommu).

* 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/msm: Fix error handling in msm_iommu_unmap()
  iommu/amd: Work around broken IVRS tables

This series contains pending target bug-fixes and cleanups for v3.3-rc3
that have been addressed the past weeks in lio-core.git.

Some of the highlights include:

 - Fix handling for control CDBs with data greater than PAGE_SIZE (andy)
 - Use IP_FREEBIND for iscsi-target to address network portal creation
   issues with systemd (dax)
 - Allow PERSISTENT RESERVE IN for non-reservation holder (marco)
 - Fix iblock se_dev_attrib.unmap_granularity (marco)
 - Fix unsupported WRITE_SAME sense payload handling (martin)
 - Add workaround for zero-length control CDB handling (nab)
 - Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT (nab)
 - Fix target_submit_cmd() exception handling (nab)
 - Return correct ASC for unimplemented VPD pages (roland)
 - Don't zero pages used for data buffers (roland)
 - Fix return code of core_tpg_.*_lun (sebastian)

* '3.3-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits)
  target: Fix unsupported WRITE_SAME sense payload
  iscsi: use IP_FREEBIND socket option
  iblock: fix handling of large requests
  target: handle empty string writes in sysfs
  iscsi_target: in_aton needs linux/inet.h
  target: Fix iblock se_dev_attrib.unmap_granularity
  target: Fix target_submit_cmd() exception handling
  target: Change target_submit_cmd() to return void
  target: accept REQUEST_SENSE with 18bytes
  target: Fail INQUIRY commands with EVPD==0 but PAGE CODE!=0
  target: Return correct ASC for unimplemented VPD pages
  iscsi-target: Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT
  target: Allow control CDBs with data > 1 page
  iscsi-target: Fix up a few assignments
  iscsi-target: make one-bit bitfields unsigned
  iscsi-target: Fix double list_add with iscsit_alloc_buffs reject
  iscsi-target: Fix reject release handling in iscsit_free_cmd()
  target: fix return code of core_tpg_.*_lun
  target: use save/restore lock primitive in core_dec_lacl_count()
  target: avoid multiple outputs in scsi_dump_inquiry()
  ...

Some simple md-related fixes.

1/ two small fixes to ensure we handle an interrupted resync properly.
2/ avoid loading the bitmap multiple times in dm-raid

* tag 'md-3.3-fixes' of git://neil.brown.name/md:
  md: two small fixes to handling interrupt resync.
  Prevent DM RAID from loading bitmap twice.

SPI bug fixes for v3.3-rc2

Minor SPI device driver changes.  A rename of the pch_spi_pcidev symbol
that merely eliminates a modpost warning, and a Kconfig change to allow
the Samsung spi driver to build on EXYNOS.

* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  spi-topcliff-pch: rename pch_spi_pcidev to pch_spi_pcidev_driver
  spi: Add spi-s3c64xx driver dependency on ARCH_EXYNOS4

Five fixes

* branch 'akpm':
  pcmcia: fix socket refcount decrementing on each resume
  mm: fix UP THP spin_is_locked BUGs
  drivers/leds/leds-lm3530.c: fix setting pltfm->als_vmax
  mm: compaction: check for overlapping nodes during isolation for migration
  nilfs2: avoid overflowing segment numbers in nilfs_ioctl_clean_segments()

This fixes a memory-corrupting bug: not only does it cause the warning,
but as a result of dropping the refcount to zero, it causes the
pcmcia_socket0 device structure to be freed while it still has
references, causing slab caches corruption.  A fatal oops quickly
follows this warning - often even just a 'dmesg' following the warning
causes the kernel to oops.

While testing suspend/resume on an ARM device with PCMCIA support, and a
CF card inserted, I found that after five suspend and resumes, the
kernel would complain, and shortly die after with slab corruption.

  WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50()

As the message doesn't give a clue about which kobject, and the built-in
debugging in drivers/base/power/main.c happens too late, this was added
right before each get_device():

  printk("%s: %p [%s] %u\n", __func__, dev, kobject_name(&dev->kobj), atomic_read(&dev->kobj.kref.refcount));

and on the 3rd s2ram cycle, the following behaviour observed:

On the 3rd suspend/resume cycle:

  dpm_prepare: c1a0d998 [pcmcia_socket0] 3
  dpm_suspend: c1a0d998 [pcmcia_socket0] 3
  dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 3
  dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 3
  dpm_resume: c1a0d998 [pcmcia_socket0] 3
  dpm_complete: c1a0d998 [pcmcia_socket0] 2

4th:

  dpm_prepare: c1a0d998 [pcmcia_socket0] 2
  dpm_suspend: c1a0d998 [pcmcia_socket0] 2
  dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 2
  dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 2
  dpm_resume: c1a0d998 [pcmcia_socket0] 2
  dpm_complete: c1a0d998 [pcmcia_socket0] 1

5th:

  dpm_prepare: c1a0d998 [pcmcia_socket0] 1
  dpm_suspend: c1a0d998 [pcmcia_socket0] 1
  dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 1
  dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 1
  dpm_resume: c1a0d998 [pcmcia_socket0] 1
  dpm_complete: c1a0d998 [pcmcia_socket0] 0
  ------------[ cut here ]------------
  WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50()
  Modules linked in: ucb1x00_core
  Backtrace:
  [<c0212090>] (dump_backtrace+0x0/0x110) from [<c04799dc>] (dump_stack+0x18/0x1c)
  [<c04799c4>] (dump_stack+0x0/0x1c) from [<c021cba0>] (warn_slowpath_common+0x50/0x68)
  [<c021cb50>] (warn_slowpath_common+0x0/0x68) from [<c021cbdc>] (warn_slowpath_null+0x24/0x28)
  [<c021cbb8>] (warn_slowpath_null+0x0/0x28) from [<c0335374>] (kobject_get+0x28/0x50)
  [<c033534c>] (kobject_get+0x0/0x50) from [<c03804f4>] (get_device+0x1c/0x24)
  [<c0388c90>] (dpm_complete+0x0/0x1a0) from [<c0389cc0>] (dpm_resume_end+0x1c/0x20)
  ...

Looking at commit 7b24e798 ("pcmcia: split up central event handler"),
the following change was made to cs.c:

                return 0;
        }
 #endif
-
-       send_event(skt, CS_EVENT_PM_RESUME, CS_EVENT_PRI_LOW);
+       if (!(skt->state & SOCKET_CARDBUS) && (skt->callback))
+               skt->callback->early_resume(skt);
        return 0;
 }

And the corresponding change in ds.c is from:

-static int ds_event(struct pcmcia_socket *skt, event_t event, int priority)
-{
-       struct pcmcia_socket *s = pcmcia_get_socket(skt);
...
-       switch (event) {
...
-       case CS_EVENT_PM_RESUME:
-               if (verify_cis_cache(skt) != 0) {
-                       dev_dbg(&skt->dev, "cis mismatch - different card\n");
-                       /* first, remove the card */
-                       ds_event(skt, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH);
-                       mutex_lock(&s->ops_mutex);
-                       destroy_cis_cache(skt);
-                       kfree(skt->fake_cis);
-                       skt->fake_cis = NULL;
-                       s->functions = 0;
-                       mutex_unlock(&s->ops_mutex);
-                       /* now, add the new card */
-                       ds_event(skt, CS_EVENT_CARD_INSERTION,
-                                CS_EVENT_PRI_LOW);
-               }
-               break;
...
-    }

-    pcmcia_put_socket(s);

-    return 0;
-} /* ds_event */

to:

+static int pcmcia_bus_early_resume(struct pcmcia_socket *skt)
+{
+       if (!verify_cis_cache(skt)) {
+               pcmcia_put_socket(skt);
+               return 0;
+       }

+       dev_dbg(&skt->dev, "cis mismatch - different card\n");

+       /* first, remove the card */
+       pcmcia_bus_remove(skt);
+       mutex_lock(&skt->ops_mutex);
+       destroy_cis_cache(skt);
+       kfree(skt->fake_cis);
+       skt->fake_cis = NULL;
+       skt->functions = 0;
+       mutex_unlock(&skt->ops_mutex);

+       /* now, add the new card */
+       pcmcia_bus_add(skt);
+       return 0;
+}

As can be seen, the original function called pcmcia_get_socket() and
pcmcia_put_socket() around the guts, whereas the replacement code
calls pcmcia_put_socket() only in one path.  This creates an imbalance
in the refcounting.

Testing with pcmcia_put_socket() put removed shows that the bug is gone:

  dpm_suspend: c1a10998 [pcmcia_socket0] 5
  dpm_suspend_noirq: c1a10998 [pcmcia_socket0] 5
  dpm_resume_noirq: c1a10998 [pcmcia_socket0] 5
  dpm_resume: c1a10998 [pcmcia_socket0] 5
  dpm_complete: c1a10998 [pcmcia_socket0] 5
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_SMP=n CONFIG_DEBUG_VM=y
CONFIG_DEBUG_SPINLOCK=n kernel: spin_is_locked() is then always false,
and so triggers some BUGs in Transparent HugePage codepaths.

asm-generic/bug.h mentions this problem, and provides a WARN_ON_SMP(x);
but being too lazy to add VM_BUG_ON_SMP, BUG_ON_SMP, WARN_ON_SMP_ONCE,
VM_WARN_ON_SMP_ONCE, just test NR_CPUS != 1 in the existing VM_BUG_ONs.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In current code, pltfm->als_vmin is set to LM3530_ALS_WINDOW_mV and
pltfm->als_vmax is 0.  This does not make sense.  I think what we want
here is setting pltfm->als_vmax to LM3530_ALS_WINDOW_mV.

Both als_vmin and als_vmax local variables will be set to
pltfm->als_vmin and pltfm->als_vmax by a few lines latter.  Thus also
remove a redundant assignment for als_vmin and als_vmax in this patch.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
Acked-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Tested-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When isolating pages for migration, migration starts at the start of a
zone while the free scanner starts at the end of the zone.  Migration
avoids entering a new zone by never going beyond the free scanned.

Unfortunately, in very rare cases nodes can overlap.  When this happens,
migration isolates pages without the LRU lock held, corrupting lists
which will trigger errors in reclaim or during page free such as in the
following oops

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  IP: [<ffffffff810f795c>] free_pcppages_bulk+0xcc/0x450
  PGD 1dda554067 PUD 1e1cb58067 PMD 0
  Oops: 0000 [#1] SMP
  CPU 37
  Pid: 17088, comm: memcg_process_s Tainted: G            X
  RIP: free_pcppages_bulk+0xcc/0x450
  Process memcg_process_s (pid: 17088, threadinfo ffff881c2926e000, task ffff881c2926c0c0)
  Call Trace:
    free_hot_cold_page+0x17e/0x1f0
    __pagevec_free+0x90/0xb0
    release_pages+0x22a/0x260
    pagevec_lru_move_fn+0xf3/0x110
    putback_lru_page+0x66/0xe0
    unmap_and_move+0x156/0x180
    migrate_pages+0x9e/0x1b0
    compact_zone+0x1f3/0x2f0
    compact_zone_order+0xa2/0xe0
    try_to_compact_pages+0xdf/0x110
    __alloc_pages_direct_compact+0xee/0x1c0
    __alloc_pages_slowpath+0x370/0x830
    __alloc_pages_nodemask+0x1b1/0x1c0
    alloc_pages_vma+0x9b/0x160
    do_huge_pmd_anonymous_page+0x160/0x270
    do_page_fault+0x207/0x4c0
    page_fault+0x25/0x30

The "X" in the taint flag means that external modules were loaded but but
is unrelated to the bug triggering.  The real problem was because the PFN
layout looks like this

  Zone PFN ranges:
    DMA      0x00000010 -> 0x00001000
    DMA32    0x00001000 -> 0x00100000
    Normal   0x00100000 -> 0x01e80000
  Movable zone start PFN for each node
  early_node_map[14] active PFN ranges
      0: 0x00000010 -> 0x0000009b
      0: 0x00000100 -> 0x0007a1ec
      0: 0x0007a354 -> 0x0007a379
      0: 0x0007f7ff -> 0x0007f800
      0: 0x00100000 -> 0x00680000
      1: 0x00680000 -> 0x00e80000
      0: 0x00e80000 -> 0x01080000
      1: 0x01080000 -> 0x01280000
      0: 0x01280000 -> 0x01480000
      1: 0x01480000 -> 0x01680000
      0: 0x01680000 -> 0x01880000
      1: 0x01880000 -> 0x01a80000
      0: 0x01a80000 -> 0x01c80000
      1: 0x01c80000 -> 0x01e80000

The fix is straight-forward.  isolate_migratepages() has to make a
similar check to isolate_freepage to ensure that it never isolates pages
from a zone it does not hold the LRU lock for.

This was discovered in a 3.0-based kernel but it affects 3.1.x, 3.2.x
and current mainline.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nsegs is read from userspace.  Limit its value and avoid overflowing nsegs
* sizeof(__u64) in the subsequent call to memdup_user().

This patch complements 481fe17e ("nilfs2: potential integer overflow
in nilfs_ioctl_clean_segments()").
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Cc: Haogang Chen <haogangchen@gmail.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sound fixes #2 for 3.3-rc3

A collection of small fixes, mostly for regressions.
In addition, a few ASoC wm8994 updates are included, too.

* tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: wm8994: Disable line output discharge prior to ramping VMID
  ASoC: wm8994: Fix typo in VMID ramp setting
  ALSA: oxygen, virtuoso: fix exchanged L/R volumes of aux and CD inputs
  ALSA: usb-audio: add Edirol UM-3G support
  ALSA: hda - add support for Uniwill ECS M31EI notebook
  ALSA: hda - Fix error handling in patch_ca0132.c
  ASoC: wm8994: Enabling VMID should take a runtime PM reference
  ALSA: hda/realtek - Fix a wrong condition
  ALSA: emu8000: Remove duplicate linux/moduleparam.h include from emu8000_patch.c
  ALSA: hda/realtek - Add missing Bass and CLFE as vmaster slaves
  ASoC: wm_hubs: Correct line input to line output 2 paths
  ASoC: cs42l73: Fix Output [X|A|V]SP_SCLK Sourcing Mode setting for master mode
  ASoC: wm8962: Fix word length configuration
  ASoC: core: Better support for idle_bias_off suspend ignores
  ASoC: wm8994: Remove ASoC level register cache sync
  ASoC: wm_hubs: Fix routing of input PGAs to line output mixer

A few small WM8994 updates to go on top of the previous lot of things
that were sent.  They collide with some -next work so I'd really like to
get them into 3.3-rc3 if possible to merge back up into the -next code.
All driver specific and unexciting in the grand scheme of things.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

The VMID ramp rate is supposed to be 0x3, not 11b. Fix that.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

The driver accidentally exchanged the left/right fields for stereo AC'97
mixer registers.  This affected only the aux and CD inputs because the
line input bypasses the AC'97 codec and the mic input is mono; cards
without AC'97 (Xonar DS/DG/HDAV Slim, HG2PCI, HiFier) were not affected.
Reported-and-tested-by: Abby Cedar <abbycedar@yahoo.com.au>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: 2.6.31+ <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

fbdev fixes for 3.3

It includes:
 - compile fix for fsl-diu-fb
 - fix for a suspend/resume issue in atmel_lcdfb
 - fix for a suspend/resume issue in OMAP
 - workaround for a hardware bug to avoid physical damage in OMAP
 - really trivial dead code removal in intelfb

* tag 'fbdev-fixes-for-3.3-1' of git://github.com/schandinat/linux-2.6:
  atmel_lcdfb: fix usage of CONTRAST_CTR in suspend/resume
  intelfb: remove some dead code
  drivers/video: compile fixes for fsl-diu-fb.c
  OMAPDSS: HDMI: PHY burnout fix
  OMAP: 4430SDP/Panda: add HDMI HPD gpio
  OMAP: 4430SDP/Panda: setup HDMI GPIO muxes
  OMAPDSS: remove wrong HDMI HPD muxing
  OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPD
  OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpios
  OMAPDSS: use sync versions of pm_runtime_put

Overly indented code should be refactored.

Suggest refactoring excessive indentation of of
if/else/for/do/while/switch statements.

For example:

$ cat t.c
#include <stdio.h>
#include <stdlib.h>

int main(int argc, char **argv)
{

	if (1)
		if (2)
			if (3)
				if (4)
					if (5)
						if (6)
							if (7)
								if (8)
									;
	return 0;
}

$ ./scripts/checkpatch.pl -f t.c
WARNING: Too many leading tabs - consider code refactoring
#12: FILE: t.c:12:
+						if (6)

WARNING: Too many leading tabs - consider code refactoring
#13: FILE: t.c:13:
+							if (7)

WARNING: Too many leading tabs - consider code refactoring
#14: FILE: t.c:14:
+								if (8)

total: 0 errors, 3 warnings, 17 lines checked

t.c has style problems, please review.

If any of these errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There were conflicts between fixes going in after 3.3-rc1 and
Russell's stable arm-soc base branch. Resolving it in the dependency
branch so that each topic branch shares the same resolution.

Conflicts:
	arch/arm/mach-at91/at91cap9.c
	arch/arm/mach-at91/at91sam9g45.c

Cleanups and error path fixes for the new SRP (SCSI RDMA protocol) target.

* tag 'ib-srpt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/srpt: Don't return freed pointer from srpt_alloc_ioctx_ring()
  IB/srpt: Fix ERR_PTR() vs. NULL checking confusion
  IB/srpt: Remove unneeded <linux/version.h> include
  IB/srpt: Use ARRAY_SIZE() instead of open-coding
  IB/srpt: Use DEFINE_SPINLOCK()/LIST_HEAD()

arch: fix ioport mapping on mips,sh

Kevin Cernekee reported that recent cleanup that replaced pci_iomap with
a generic function failed to take into account the differences in io
port handling on mips and sh architectures.

Rather than revert the changes reintroducing the code duplication, this
patchset fixes this by adding ability for architectures to override
ioport mapping for pci devices.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  sh: use the the PCI channels's io_map_base
  mips: use the the PCI controller's io_map_base
  lib: add NO_GENERIC_PCI_IOPORT_MAP

Those lines have two copies.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>