- 18 Dec, 2017 18 commits
-
-
Parav Pandit authored
ib_find_gid_by_filter() is used only by ib_core, therefore avoid exporting it. Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Parav Pandit authored
While searching for GID, returned index is not used, so avoid passing pointer during invocation. Signed-off-by:
-
Parav Pandit authored
Currently on every gid entry comparison miss found variable is checked; which is not needed as those two comparison fail already indicate that GID is not found yet. So refactor to avoid such check and copy the GID index when found. Signed-off-by:
-
Parav Pandit authored
Type cast from void to struct find_gid_index_context is not needed. Signed-off-by:
-
Parav Pandit authored
Introduce and user helper functions to initialize work for address resolved and route resolved event that avoid code duplication at few places. Signed-off-by:
-
Parav Pandit authored
Avoid setting path record type twice for RoCE. Signed-off-by:
-
Parav Pandit authored
Current code checks for NULL ndev twice where 2nd check is always invalid given the fact that during route resolving stage, device address must be bound to netdevice interface. This patch simplifies such check. Signed-off-by:
-
Parav Pandit authored
As the function name suggests cma_resolve_iboe_route() resolves RoCE route. However, its default GID type is IB_GID_TYPE_IB and not IB_GID_TYPE_ROCE, even though both are mapped to the same enum value. Change default GID type to IB_GID_TYPE_ROCE. cma_iboe_set_mgid() is updated to reflect the RoCEv2 GID check. Signed-off-by:
Noa Osherovich <noaos@mellanox.com> Signed-off-by:
-
Artemy Kovalyov authored
In ib_umem structure npages holds original number of sg entries, while nmap is number of DMA blocks returned by dma_map_sg. Fixes: c5d76f13 ('IB/core: Add umem function to read data from user-space') Signed-off-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
-
Daniel Jurgens authored
Add debug prints to the error paths in the connection manager control flows, to help debug connection management problems. Signed-off-by:
-
Matan Barak authored
In cm_req_handler error flows, sometimes cm_id_priv->timewait_info isn't free'd. Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Mukesh Kacker <mukesh.kacker@oracle.com> Signed-off-by:
-
Parav Pandit authored
The code was using the src size when formatting the dst. They are almost certainly the same value but it reads wrong. Fixes: ce117ffa ("RDMA/cma: Export AF_IB statistics") Signed-off-by:
-
Erez Shitrit authored
In case that the PathRecord is not valid (SM changed its network prefix) ipoib will continue issue PathQuery requests with the same parameters that are in its database, which are no longer valid anymore. Now the driver in that case will re-initialize the record from a valid place (the priv structure keeps the updated values), and a valid request will be issued. Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Reviewed-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
-
Erez Shitrit authored
The ipoib path database is organized around DGIDs from the LLADDR, but the SA is free to return a different GID when asked for path. This causes a bug because the SA's modified DGID is copied into the database key, even though it is no longer the correct lookup key, causing a memory leak and other malfunctions. Ensure the database key does not change after the SA query completes. Demonstration of the bug is as follows ipoib wants to send to GID fe80:0000:0000:0000:0002:c903:00ef:5ee2, it creates new record in the DB with that gid as a key, and issues a new request to the SM. Now, the SM from some reason returns path-record with other SGID (for example, 2001:0000:0000:0000:0002:c903:00ef:5ee2 that contains the local subnet prefix) now ipoib will overwrite the current entry with the new one, and if new request to the original GID arrives ipoib will not find it in the DB (was overwritten) and will create new record that in its turn will also be overwritten by the response from the SM, and so on till the driver eats all the device memory. Signed-off-by:
-
Erez Alfasi authored
Remove unused ibpd parameter from create_qp_rss() function. Signed-off-by:
Erez Alfasi <ereza@mellanox.com> Signed-off-by:
-
Parav Pandit authored
ib_security_modify_qp and ib_security_pkey_access are core internal function. So avoid exporting them. ib_security_pkey_access is used only when secuirty hooks are enabled so avoid defining it otherwise. Signed-off-by:
-
Parav Pandit authored
RoCEv1 does not use the IPv6 stack to resolve the link local DGID since it uses GID address. It forms the DMAC directly from the DGID. The code became confused and also tried to use this bypass for RoCEv2 packets, however RoCEv2 always uses a IP address in the GID and must always use ARP or neighbor discovery to get the DMAC address. Now that rdma_addr_find_l2_eth_by_grh() supports resolving link local address to find destination mac address, lets make use of it. This aligns it to how the rest of the IPv6 stack resolves link local destination IPv6 address. Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
-
Parav Pandit authored
When computing a UD reverse path (return AH) from a WC the code was not doing a route lookup anchored in a specific netdevice. This caused several bugs, including broken IPv6 link-local address support in RoCEv2. [1] This fixes the lookup by determining the GID table entry that the HW matched to the SGID for the WC and then using the netdevice from that entry to perform the route and ND lookup for the 'DGID' to build a return AH. RoCE GID table management ensures that right upper netdevices of the physical netdevices are added. Therefore init_ah_from_wc doesn't need to perform such check. Now that route lookup is done based on the netdevice of the GID entry, simplify code to not have ifindex and vlan pointers. As part of that, refactor to have netdevice as input parameter. This is already discussed at [2]. Finally ib_init_ah_from_wc resolves dmac for unicast GID in similar way as what ib_resolve_eth_dmac() does. So ib_resolve_eth_dmac is refactored to split for unicast and non unicast GIDs, so that it can be reused by ib_init_ah_from_wc. While we are at refactoring ib_resolve_eth_dmac(), it is further simplified (a) to avoid hoplimit as optional parameter, as there is only one user who always queries hoplimit. (b) for empty line. (c) avoided zero initialization of ret. (d) removed as exported symbol as only ib core uses it. For IPv6, this is tested using simple rping test as below. rping -sv -a ::0 rping -c -a fe80::268a:7ff:fe55:4661%ens2f1 -C 1 -v -d [1] https://www.spinics.net/lists/linux-rdma/msg45690.html [2] https://www.spinics.net/lists/linux-rdma/msg45710.htmlSigned-off-by:Mark Bloch <markb@mellanox.com> Reported-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
- 13 Dec, 2017 8 commits
-
-
Andrew F. Davis authored
Found with scripts/coccinelle/misc/boolconv.cocci. Signed-off-by:
Andrew F. Davis <afd@ti.com> Signed-off-by:
-
Dan Carpenter authored
Smatch complains about this code: drivers/infiniband/hw/mlx4/qp.c:1827 _mlx4_set_path() error: buffer overflow 'dev->dev->caps.gid_table_len' 3 <= 255 The mlx4_ib_gid_index_to_real_index() does check that "port" is within bounds, but we don't check the return value for errors. It seems simple enough to add a check for that. Signed-off-by:Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Dan Carpenter authored
The story is that Smatch marks skb->data as untrusted so it generates a warning message here: drivers/infiniband/hw/cxgb4/cm.c:4100 process_work() error: buffer overflow 'work_handlers' 241 <= 255 In other places which handle this such as t4_uld_rx_handler() there is some checking to make sure that the function pointer is not NULL. I have added bounds checking and a check for NULL here as well. Signed-off-by:Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Colin Ian King authored
The pointer reg_workq is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: drivers/infiniband/hw/cxgb4/device.c:69:25: warning: symbol 'reg_workq' was not declared. Should it be static? Fixes: 1c8f1da5 ("iw_cxgb4: Fix possible circular dependency locking warning") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Arnd Bergmann authored
The debugfs file prints the difference between host timestamps as a seconds/nanoseconds tuple, along with a 64-bit nanoseconds hardware timestamp. The host time is read using getnstimeofday() which is deprecated because of the y2038 overflow, and it suffers from time jumps during settimeofday() and leap seconds. Converting to ktime_get_ts64() would solve those two, but I'm going a little further here by changing to ktime_get() and printing 64-bit nanoseconds on both host and hw timestamps. This simplifies the code further and makes the output easier to understand. The format of the debugfs file obviously changes here, but this should only be read by humans and not scripts, so I assume it's fine. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
-
Geert Uytterhoeven authored
With gcc-4.1.2: drivers/infiniband/core/iwpm_util.c: In function ‘iwpm_send_mapinfo’: drivers/infiniband/core/iwpm_util.c:647: warning: ‘ret’ may be used uninitialized in this function Indeed, if nl_client is not found in any of the scanned has buckets, ret will be used uninitialized. Preinitialize ret to -EINVAL to fix this. Fixes: 30dc5e63 ("RDMA/core: Add support for iWARP Port Mapper user space service") Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by:
-
Yuval Shaia authored
If one port fails to initialize an error message should indicate the reason and driver should continue serving the working port(s) and other HCA(s). Fixes: e4b2d068 ("IB/ipoib: Remove device when one port fails to init"). Signed-off-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
-
Arvind Yadav authored
The bnxt_qplib_disable_nq() call is redundant as it occurs after 'goto fail' and hence it called twice. Remove it. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
- 11 Dec, 2017 14 commits
-
-
Andy Shevchenko authored
There is no need to have a duplication of the generic library, i.e. hex2bin(). Replace the open coded variant. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
-
Arnd Bergmann authored
A warning that I thought I had fixed before occasionally comes back in rare randconfig builds (I found 7 instances in the last 100000 builds, originally it was much more frequent): drivers/infiniband/hw/mlx5/mr.c: In function 'mlx5_ib_reg_user_mr': drivers/infiniband/hw/mlx5/mr.c:1229:5: error: 'order' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (order <= mr_cache_max_order(dev)) { ^ drivers/infiniband/hw/mlx5/mr.c:1247:8: error: 'ncont' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/infiniband/hw/mlx5/mr.c:1247:8: error: 'page_shift' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/infiniband/hw/mlx5/mr.c:1260:2: error: 'npages' may be used uninitialized in this function [-Werror=maybe-uninitialized] I've looked at all those findings again and noticed that they are all with CONFIG_INFINIBAND_USER_MEM=n, which means ib_umem_get() returns an error unconditionally and we never initialize or use those variables. This triggers a condition in gcc iff mr_umem_get() is partially but not entirely inlined, which in turn depends on the exact combination of optimization settings. This is a known problem with gcc, with no easy solution in the compiler, so this adds another workaround that should be more reliable than my previous attempt. Returning an error from mlx5_ib_reg_user_mr() earlier means that we can completely bypass the logic that caused the warning, the compiler can now see that the variable is never accessed. Fixes: 14ab8896 ("IB/mlx5: avoid bogus -Wmaybe-uninitialized warning") Signed-off-by: -
Mustafa Ismail authored
add_sd_cnt in info structure passed to i40iw_create_hmc_obj_type must be 0 and since it is modified during the call, it must be reset in the loop. This avoids unnecessarily reprogramming the SDs multiple times with the same values. Signed-off-by:
Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
-
Chien Tin Tung authored
Use sqsize instead of I40IW_CQP_SW_SQSIZE_2048 to initialize cqp_requests elements in the for-loop as sqsize is used to allocate memory for cqp_requests. Signed-off-by:
Chien Tin Tung <chien.tin.tung@intel.com> Signed-off-by:
-
Yuval Shaia authored
pr_* is the preferred way to print messages, replace all printk(KERN_WARN, ...) with pr_warn. Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Gomonovych, Vasyl authored
Fix ptr_ret.cocci warnings: drivers/infiniband/core/uverbs_cmd.c:1156:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by:
Vasyl Gomonovych <gomonovych@gmail.com> Reviewed-by:
-
Arnd Bergmann authored
There is a stale entry in nes_cm_tcp_context that has apparently never been used in mainline linux. I'm trying to kill off all users of timeval as part of the y2038-safety work, so let's just remove this one. Signed-off-by:
-
Arnd Bergmann authored
There is a stale entry in i40iw_cm_tcp_context that apparently was copied from the 'nes' driver but never used in i40iw. I'm trying to kill off all users of timeval as part of the y2038-safety work, so let's just remove this one. Signed-off-by:
-
Yuval Shaia authored
There is no need to re-calculate the number of pages since it is already done in ib_umem_get. Signed-off-by:
Adit Ranadive <aditr@vmware.com> Tested-by:
-
Geert Uytterhoeven authored
Remove leftover garbage (containing Kconfig dependencies for another symbol?) Signed-off-by:
-
Joe Perches authored
Perhaps the function is better written without the empty bail: label and without setting ret and just using return. Combining the int/bool conversion of any and the direct returns makes the resulting code clearer. Tested-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Colin Ian King authored
The variable all is being set but is never read after this hence it can be removed from the for loop initialization. Cleans up clang warning: drivers/infiniband/hw/qib/qib_file_ops.c:640:7: warning: Value stored to 'any' is never read Tested-by:
-
Mike Marciniszyn authored
This failure exists with qib: ver_rc_compare_swap: mismatch, sequence 2, expected 123456789abcdef, got 0 The request builder was using the incorrect inlines to build the request header resulting in incorrect data in the atomic header. Fix by using the appropriate inlines to create the request. Cc: <stable@vger.kernel.org> # 4.9.x+ Fixes: 261a4351 ("IB/qib,IB/hfi: Use core common header file") Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Jan Sokolowski authored
Currently, if a port is queried that has an invalid Maximum Transmission Unit, driver reports default MTU of 2048. This in incorrect. Use default value of 4096 if invalid. Reviewed-by:
Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by:
-
