According to the ov5640 specification (2.7 power up sequence), host can
access the sensor's registers 20ms after reset. Trying to access them
before leads to undefined behavior and result in sporadic initialization
errors.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

The ov5640_try_frame_interval operation updates the FPS as per user
input based on default ov5640_frame_rate, OV5640_30_FPS which is failed
to update when user trigger 15fps.

So, initialize the default ov5640_frame_rate to OV5640_15_FPS so-that
it can satisfy to update all fps.

Fixes: 5a3ad937 ("media: ov5640: Make the return rate type more explicit")
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

The register value lists for all the supported resolution settings all
include a register address/value pair for setting the JPEG compression
mode. With the exception of 1080p (which sets mode 2), all resolutions
use mode 3.

The only difference between mode 2 and mode 3 is that mode 2 may have
padding data on the last line, while mode 3 does not add padding data.

As these register values were from dumps of running systems, and the
difference between the modes is quite small, using mode 3 for all
configurations should be OK.

[Sakari Ailus: Align OV5640_REG_JPG_MODE_SELECT register naming.]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

When compression is turned on, the on-bus data is framed according to
the compression mode, and the height and width set in VFIFO_VSIZE and
VFIFO_HSIZE. If these are not updated correctly, the sensor will send
data framed in a manner unexpected by the capture interface, such as
having more bytes per line than expected, and having the extra data
dropped. This ultimately results in corrupted data.

Set the two values when the media bus is configured for JPEG data,
meaning the sensor would be in JPEG mode.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

The OV5640 driver currently supports a static color bar pattern with a
small vertical gamma gradient. The hardware also supports a color square
pattern, as well as having a rolling bar for dynamic sequences.

Add three more test patterns:

  - color bars with a rolling bar (but without the gamma gradient)
  - static color squares
  - color squares with a rolling bar
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

The transparent feature for test patterns blends the test pattern with
an actual captured image. This makes the result non-static, subject to
changes in the sensor's field of view.

Test patterns should be predictable and deterministic, even if they are
dynamic patterns. Disable the transparent feature of the test pattern.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

The OV5640 can generate many types of test patterns, some with
additional modifiers, such as a rolling bar, or gamma gradients.

Add the bit definitions for all bits in the test pattern register,
and use them to compose the values to be written to the register.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

The OV5640 has many options for generating test patterns. Unfortunately
there is only one V4L2 control for it. Thus the driver would need to
list some or all combinations.

Move the test_pattern_menu list before the ov5640_set_ctrl_test_pattern
function that programs the hardware. This would allow us to add a
matching list of values to program into the hardware, while keeping the
two lists together for ease of maintenance.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

The ADV748X_PAGE_WAIT is a fake page to insert arbitrary delays in the
register tables.

Its only usage was removed, so we can remove the handling and simplify
the code.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

The ADV748x is currently reset by writting a small table of registers to
the device.

The table lacks documentation and contains magic values to perform the
actions, including using a fake register address to introduce a delay
loop.

Remove the table, and convert to code, documenting the purpose of the
specific writes along the way.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

When the adv748x driver is informed about a link being created from HDMI or
AFE to a CSI-2 TX output, the 'link_setup()' callback is invoked. Make
sure to implement proper routing management at link setup time, to route
the selected video stream to the desired TX output.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Both the AFE and HDMI s_stream routines (adv748x_afe_s_stream() and
adv748x_hdmi_s_stream()) have to enable the CSI-2 TX they are streaming video
data to.

With the introduction of dynamic routing between HDMI and AFE entities to
TXA, the video stream sink needs to be set at run time, and not statically
selected as the s_stream functions are currently doing.

To fix this, store a reference to the active CSI-2 TX sink for both HDMI and
AFE sources, and operate on it when starting/stopping the stream.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

The power_up_tx() procedure needs to set a few registers conditionally to
the selected video source, but it currently checks for the provided tx to
be either TXA or TXB.

With the introduction of dynamic routing between HDMI and AFE entities to
TXA, checking which TX the function is operating on is not meaningful anymore.

To fix this, store the subdevice of the source providing video data to the
CSI-2 TX in the 'struct adv748x_csi2' representing the TX and check on it.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

The ADV748x chip supports routing AFE output to either TXA or TXB.
In order to support run-time configuration of video stream path, create an
additional (not enabled) "AFE:8->TXA:0" link, and remove the IMMUTABLE flag
from existing ones.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Rename the chip reset procedure as they configure the CP (HDMI) and SD
(AFE) cores.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add small is_txb() macro to the existing is_txa() and use it where
appropriate.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

The sd argument of this macro can be a more complex expression. Since it
is used 5 times in the macro it can be evaluated that many times as well.

So assign it to a temp variable in the beginning and use that instead.

This also avoids any potential side-effects of evaluating sd.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Remove unused but set variables to clean up the code and avoid
warning.
Signed-off-by: Lucas A. M. Magalhães <lucmaga@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

The capture compose rectangle was not getting updated when setting
the source subdevice's source pad format. This causes the compose window
to be zero (or not updated) at stream start unless the capture device
format was set explicitly at the capture device node.

Fix by moving the calculation of the capture compose rectangle to
imx_media_mbus_fmt_to_pix_fmt(), and pass the rectangle to
imx_media_capture_device_set_format().

Fixes: 439d8186 ("media: imx: add capture compose rectangle")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add VB2_USERPTR to the vimc capture device.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

A merge conflict rised when merging from -rc7. Fix it.

In this specific case, we don't need the if anymore, as the
work_run was moved to its rightful place (struct vim2m_ctx).

Fixes: b3e64e5b ("media: vim2m: use per-file handler work queue")
Fixes: 240809ef ("media: vim2m: only cancel work if it is for right context")
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

The linked commit changed s_fmt/try_fmt to fail if num_planes is bogus.
This, however, is against the spec, which mandates drivers
to return a proper num_planes value, without an error.

Replace the num_planes check and instead clamp it to a sane value,
so we still make sure we don't overflow the planes array by accident.

Fixes: 9048b2e1 ("media: v4l: ioctl: Validate num_planes before using it")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Linux 5.0-rc7

* tag 'v5.0-rc7': (1667 commits)
  Linux 5.0-rc7
  Input: elan_i2c - add ACPI ID for touchpad in Lenovo V330-15ISK
  Input: st-keyscan - fix potential zalloc NULL dereference
  Input: apanel - switch to using brightness_set_blocking()
  powerpc/64s: Fix possible corruption on big endian due to pgd/pud_present()
  efi/arm: Revert "Defer persistent reservations until after paging_init()"
  arm64, mm, efi: Account for GICv3 LPI tables in static memblock reserve table
  sunrpc: fix 4 more call sites that were using stack memory with a scatterlist
  include/linux/module.h: copy __init/__exit attrs to init/cleanup_module
  Compiler Attributes: add support for __copy (gcc >= 9)
  lib/crc32.c: mark crc32_le_base/__crc32c_le_base aliases as __pure
  auxdisplay: ht16k33: fix potential user-after-free on module unload
  x86/platform/UV: Use efi_runtime_lock to serialise BIOS calls
  i2c: bcm2835: Clear current buffer pointers and counts after a transfer
  i2c: cadence: Fix the hold bit setting
  drm: Use array_size() when creating lease
  dm thin: fix bug where bio that overwrites thin block ignores FUA
  Revert "exec: load_script: don't blindly truncate shebang string"
  Revert "gfs2: read journal in large chunks to locate the head"
  net: ethernet: freescale: set FEC ethtool regs version
  ...
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Pull EFI fixes from Ingo Molnar:
 "This tree reverts a GICv3 commit (which was broken) and fixes it in
  another way, by adding a memblock build-time entries quirk for ARM64"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/arm: Revert "Defer persistent reservations until after paging_init()"
  arm64, mm, efi: Account for GICv3 LPI tables in static memblock reserve table

Pull x86 fixes from Ingo Molnar:
 "Three changes:

   - An UV fix/quirk to pull UV BIOS calls into the efi_runtime_lock
     locking regime. (This done by aliasing __efi_uv_runtime_lock to
     efi_runtime_lock, which should make the quirk nature obvious and
     maintain the general policy that the EFI lock (name...) isn't
     exposed to drivers.)

   - Our version of MAGA: Make a.out Great Again.

   - Add a new Intel model name enumerator to an upstream header to help
     reduce dependencies going forward"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/UV: Use efi_runtime_lock to serialise BIOS calls
  x86/CPU: Add Icelake model number
  x86/a.out: Clear the dump structure initially

Pull perf fixes from Ingo Molnar:
 "Two fixes on the kernel side: fix an over-eager condition that failed
  larger perf ring-buffer sizes, plus fix crashes in the Intel BTS code
  for a corner case, found by fuzzing"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix impossible ring-buffer sizes warning
  perf/x86: Add check_period PMU callback

Pull powerpc fix from Michael Ellerman:
 "Just one fix, for pgd/pud_present() which were broken on big endian
  since v4.20, leading to possible data corruption.

  Thanks to: Aneesh Kumar K.V., Erhard F., Jan Kara"

* tag 'powerpc-5.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Fix possible corruption on big endian due to pgd/pud_present()

Pull arch/csky fixes from Guo Ren:
 "Here are some fixup patches for 5.0-rc6"

* tag 'csky-for-linus-5.0-rc6' of git://github.com/c-sky/csky-linux:
  csky: Fixup dead loop in show_stack
  csky: Fixup io-range page attribute for mmap("/dev/mem")
  csky: coding convention: Use task_stack_page
  csky: Fixup wrong pt_regs size
  csky: Fixup _PAGE_GLOBAL bit for 610 tlb entry

Pull i2c fixes from Wolfram Sang:
 "Two more driver bugfixes"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: bcm2835: Clear current buffer pointers and counts after a transfer
  i2c: cadence: Fix the hold bit setting

Pull input fixes from Dmitry Torokhov:

 - tweaks to Elan drivers (both PS/2 and I2C) to support new devices.
   Also revert of one of IDs as that device should really be driven by
   i2c-hid + hid-multitouch

 - a few drivers have been switched to set_brightness_blocking() call
   because they either were sleeping the their set_brightness()
   implementation or used workqueue but were not canceling it on unbind.

 - ps2-gpio and matrix_keypad needed to [properly] flush their works to
   avoid potential use-after-free on unbind.

 - other miscellaneous fixes.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c - add ACPI ID for touchpad in Lenovo V330-15ISK
  Input: st-keyscan - fix potential zalloc NULL dereference
  Input: apanel - switch to using brightness_set_blocking()
  Revert "Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G"
  Input: qt2160 - switch to using brightness_set_blocking()
  Input: matrix_keypad - use flush_delayed_work()
  Input: ps2-gpio - flush TX work when closing port
  Input: cap11xx - switch to using set_brightness_blocking()
  Input: elantech - enable 3rd button support on Fujitsu CELSIUS H780
  Input: bma150 - register input device after setting private data
  Input: pwm-vibra - stop regulator after disabling pwm, not before
  Input: pwm-vibra - prevent unbalanced regulator
  Input: snvs_pwrkey - allow selecting driver for i.MX 7D

Pull KVM fixes from Paolo Bonzini:
 "A somewhat bigger ARM update, and the usual smattering of x86 bug
  fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: vmx: Fix entry number check for add_atomic_switch_msr()
  KVM: x86: Recompute PID.ON when clearing PID.SN
  KVM: nVMX: Restore a preemption timer consistency check
  x86/kvm/nVMX: read from MSR_IA32_VMX_PROCBASED_CTLS2 only when it is available
  KVM: arm64: Forbid kprobing of the VHE world-switch code
  KVM: arm64: Relax the restriction on using stage2 PUD huge mapping
  arm: KVM: Add missing kvm_stage2_has_pmd() helper
  KVM: arm/arm64: vgic: Always initialize the group of private IRQs
  arm/arm64: KVM: Don't panic on failure to properly reset system registers
  arm/arm64: KVM: Allow a VCPU to fully reset itself
  KVM: arm/arm64: Reset the VCPU without preemption and vcpu state loaded
  arm64: KVM: Don't generate UNDEF when LORegion feature is present
  KVM: arm/arm64: vgic: Make vgic_cpu->ap_list_lock a raw_spinlock
  KVM: arm/arm64: vgic: Make vgic_dist->lpi_list_lock a raw_spinlock
  KVM: arm/arm64: vgic: Make vgic_irq->irq_lock a raw_spinlock

This adds ELAN0617 to the ACPI table to support Elan touchpad found in
Lenovo V330-15ISK.
Signed-off-by: Mauro Ciancio <mauro@acadeu.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This patch fixes the following static checker warning:

drivers/input/keyboard/st-keyscan.c:156 keyscan_probe()
error: potential zalloc NULL dereference: 'keypad_data->input_dev'
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Now that LEDs core allows "blocking" flavor of "set brightness" method we
can use it and get rid of private work item. As a bonus, we are no longer
forgetting to cancel it when we unbind the driver.
Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

In v4.20 we changed our pgd/pud_present() to check for _PAGE_PRESENT
rather than just checking that the value is non-zero, e.g.:

  static inline int pgd_present(pgd_t pgd)
  {
 -       return !pgd_none(pgd);
 +       return (pgd_raw(pgd) & cpu_to_be64(_PAGE_PRESENT));
  }

Unfortunately this is broken on big endian, as the result of the
bitwise & is truncated to int, which is always zero because
_PAGE_PRESENT is 0x8000000000000000ul. This means pgd_present() and
pud_present() are always false at compile time, and the compiler
elides the subsequent code.

Remarkably with that bug present we are still able to boot and run
with few noticeable effects. However under some work loads we are able
to trigger a warning in the ext4 code:

  WARNING: CPU: 11 PID: 29593 at fs/ext4/inode.c:3927 .ext4_set_page_dirty+0x70/0xb0
  CPU: 11 PID: 29593 Comm: debugedit Not tainted 4.20.0-rc1 #1
  ...
  NIP .ext4_set_page_dirty+0x70/0xb0
  LR  .set_page_dirty+0xa0/0x150
  Call Trace:
   .set_page_dirty+0xa0/0x150
   .unmap_page_range+0xbf0/0xe10
   .unmap_vmas+0x84/0x130
   .unmap_region+0xe8/0x190
   .__do_munmap+0x2f0/0x510
   .__vm_munmap+0x80/0x110
   .__se_sys_munmap+0x14/0x30
   system_call+0x5c/0x70

The fix is simple, we need to convert the result of the bitwise & to
an int before returning it.

Thanks to Erhard, Jan Kara and Aneesh for help with debugging.

Fixes: da7ad366 ("powerpc/mm/book3s: Update pmd_present to look at _PAGE_PRESENT bit")
Cc: stable@vger.kernel.org # v4.20+
Reported-by: Erhard F. <erhard_f@mailbox.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pull ARM SoC fixes from Arnd Bergmann:
 "This week is a much smaller update, containing fixes only for TI OMAP,
  NXP i.MX and Rockchips platforms:

  omap:
   - omap4 had problems with lost timer interrupts
   - another IRQ handling issue with OMAP5
   - A workaround for a regression in the pwm-omap-dmtimer driver

  NXP i.MX:
   - eMMC was broken on the new imx8mq-evk board

  Rockchip:
   - a fix for new dtc graph warnings and a regulator fix for rock64
   - USB support broke on rk3328-rock64"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: OMAP2+: fix lack of timer interrupts on CPU1 after hotplug
  arm64: dts: imx8mq: Fix boot from eMMC
  ARM: OMAP2+: Variable "reg" in function omap4_dsi_mux_pads() could be uninitialized
  ARM: dts: Configure clock parent for pwm vibra
  bus: ti-sysc: Fix timer handling with drop pm_runtime_irq_safe()
  arm64: dts: rockchip: enable usb-host regulators at boot on rk3328-rock64
  arm64: dts: rockchip: fix graph_port warning on rk3399 bob kevin and excavator
  ARM: OMAP5+: Fix inverted nirq pin interrupts with irq_set_type
  clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting
  ARM: dts: rockchip: remove qos_cif1 from rk3188 power-domain

Pull more nfsd fixes from Bruce Fields:
 "Two small fixes, one for crashes using nfs/krb5 with older enctypes,
  one that could prevent clients from reclaiming state after a kernel
  upgrade"

* tag 'nfsd-5.0-2' of git://linux-nfs.org/~bfields/linux:
  sunrpc: fix 4 more call sites that were using stack memory with a scatterlist
  Revert "nfsd4: return default lease period"

Pull more NFS client fixes from Anna Schumaker:
 "Three fixes this time.

  Nicolas's is for xprtrdma completion vector allocation on single-core
  systems. Greg's adds an error check when allocating a debugfs dentry.
  And Ben's is an additional fix for nfs_page_async_flush() to prevent
  pages from accidentally getting truncated.

  Summary:

   - Make sure Send CQ is allocated on an existing compvec

   - Properly check debugfs dentry before using it

   - Don't use page_file_mapping() after removing a page"

* tag 'nfs-for-5.0-4' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFS: Don't use page_file_mapping after removing the page
  rpc: properly check debugfs dentry before using it
  xprtrdma: Make sure Send CQ is allocated on an existing compvec

Pull auxdisplay fix from Miguel Ojeda:
 "Fix potential user-after-free on ht16k33 module unload. Reported by
  Sven Van Asbroeck"

* tag 'auxdisplay-for-linus-v5.0-rc7' of git://github.com/ojeda/linux:
  auxdisplay: ht16k33: fix potential user-after-free on module unload