- 19 Jan, 2013 4 commits
-
-
Marek Lindner authored
Signed-off-by:
Marek Lindner <lindner_marek@yahoo.de> Signed-off-by:
Antonio Quartulli <ordex@autistici.org>
-
Marek Lindner authored
Signed-off-by:
-
Marek Lindner authored
Signed-off-by:
-
Antonio Quartulli authored
A delayed_work struct does not need to be initialized each every time before being enqueued. Therefore the INIT_DELAYED_WORK() macro should be used during the initialization process only. Signed-off-by:
-
- 18 Jan, 2013 25 commits
-
-
Hannes Frederic Sowa authored
This is already checked by the caller (tunnel64_rcv) and brings ipip6_rcv in line with ipip_rcv. Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Check message length before accessing "target" field, as we do for other types. Signed-off-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Because of rt->n removal, we do not need neigh argument any more. Signed-off-by:
-
Dan Carpenter authored
These are copying data into 16 char arrays. They all specify that the first string can't be more than 11 characters but once you add on the "-rx-" and the NUL character there isn't space for the %d. The first string is probably never going to be 11 characters, but if it is then let's truncate the string instead of corrupting memory. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Fabio Estevam authored
ioremap returns 'void __iomem *' type. Fix the following build warnings: drivers/net/ethernet/smsc/smc911x.c:2079:14: warning: incorrect type in assignment (different address spaces) drivers/net/ethernet/smsc/smc911x.c:2079:14: expected unsigned int *addr drivers/net/ethernet/smsc/smc911x.c:2079:14: got void [noderef] <asn:2>* drivers/net/ethernet/smsc/smc911x.c:2086:18: warning: incorrect type in assignment (different address spaces) drivers/net/ethernet/smsc/smc911x.c:2086:18: expected void [noderef] <asn:2>*base drivers/net/ethernet/smsc/smc911x.c:2086:18: got unsigned int *addr drivers/net/ethernet/smsc/smc911x.c:2091:25: warning: incorrect type in argument 1 (different address spaces) drivers/net/ethernet/smsc/smc911x.c:2091:25: expected void volatile [noderef] <asn:2>*addr drivers/net/ethernet/smsc/smc911x.c:2091:25: got unsigned int *addr Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Simon Que authored
In two places, tmp is initialized implicitly by being passed as a pointer during a function call. However, this is not obvious to the compiler, which logs a warning. Signed-off-by:
Simon Que <sque@chromium.org> Acked-by:
Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by:
-
Mugunthan V N authored
When there is heavy transmission traffic in the CPDMA, then Rx descriptors memory is also utilized as tx desc memory looses all rx descriptors and the driver stops working then. This patch adds boundary for tx and rx descriptors in bd ram dividing the descriptor memory to ensure that during heavy transmission tx doesn't use rx descriptors. This patch is already applied to davinci_emac driver, since CPSW and davici_dmac shares the same CPDMA, moving the boundry seperation from Davinci EMAC driver to CPDMA driver which was done in the following commit commit 86d8c07f Author: Sascha Hauer <s.hauer@pengutronix.de> Date: Tue Jan 3 05:27:47 2012 +0000 net/davinci: do not use all descriptors for tx packets The driver uses a shared pool for both rx and tx descriptors. During open it queues fixed number of 128 descriptors for receive packets. For each received packet it tries to queue another descriptor. If this fails the descriptor is lost for rx. The driver has no limitation on tx descriptors to use, so it can happen during a nmap / ping -f attack that the driver allocates all descriptors for tx and looses all rx descriptors. The driver stops working then. To fix this limit the number of tx descriptors used to half of the descriptors available, the rx path uses the other half. Tested on a custom board using nmap / ping -f to the board from two different hosts. Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
-
Alan Ott authored
Handle the reception of uncompressed packets (dispatch type = IPv6). Signed-off-by:
Alan Ott <alan@signal11.us> Signed-off-by:
-
Alan Ott authored
Refactor the handing of the skb's to the individual lowpan devices into a function. Signed-off-by:
-
Frank Li authored
The limition of imx6 internal bus cause fec can't achieve 1G perfomance. There will be many packages lost because FIFO over run. This patch enable pause frame flow control. Before this patch iperf -s -i 1 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 4] local 10.192.242.153 port 5001 connected with 10.192.242.94 port 49773 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 1.0 sec 6.35 MBytes 53.3 Mbits/sec [ 4] 1.0- 2.0 sec 3.39 MBytes 28.5 Mbits/sec [ 4] 2.0- 3.0 sec 2.63 MBytes 22.1 Mbits/sec [ 4] 3.0- 4.0 sec 1.10 MBytes 9.23 Mbits/sec ifconfig RX packets:46195 errors:1859 dropped:1 overruns:1859 frame:1859 After this patch iperf -s -i 1 [ 4] local 10.192.242.153 port 5001 connected with 10.192.242.94 port 49757 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 1.0 sec 49.8 MBytes 418 Mbits/sec [ 4] 1.0- 2.0 sec 50.1 MBytes 420 Mbits/sec [ 4] 2.0- 3.0 sec 47.5 MBytes 399 Mbits/sec [ 4] 3.0- 4.0 sec 45.9 MBytes 385 Mbits/sec [ 4] 4.0- 5.0 sec 44.8 MBytes 376 Mbits/sec ifconfig RX packets:2348454 errors:0 dropped:16 overruns:0 frame:0 Signed-off-by:
Frank Li <Frank.Li@freescale.com> Signed-off-by:
Fugang Duan <B38611@freescale.com> Signed-off-by:
-
Lucas Stach authored
ASIX AX88772B started to pack data even more tightly. Packets and the ASIX packet header may now cross URB boundaries. To handle this we have to introduce some state between individual calls to asix_rx_fixup(). Signed-off-by:
Lucas Stach <dev@lynxeye.de> Signed-off-by:
-
Lucas Stach authored
The device comes up with a MAC address of all zeros. We need to read the initial device MAC from EEPROM so it can be set properly later. Signed-off-by:
-
David S. Miller authored
Jeff Kirsher says: ==================== This series contains updates to e1000e and igb. Most notably is the added timestamp support in e1000e and additional software timestamp support in igb. As well as, the added thermal data support and SR-IOV configuration support in igb. v2- dropped the following patches from the previous 14 patch series because changes were requested from the community: e1000e: add support for IEEE-1588 PTP igb: Report L4 Rx hash via skb->l4_rxhash ==================== Signed-off-by: -
Matthew Vick authored
Rather than use an extra #define for something that already exists, use the kernel #define for the PTP port. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Matthew Vick <matthew.vick@intel.com> Acked-by:
Jacob Keller <Jacob.e.keller@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Matthew Vick authored
To prevent a race condition where an skb has been saved to return the Tx timestamp later and the driver is removed, add a check to determine if we have an skb stored and, if so, free it. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Matthew Vick authored
Add a check against possible Rx timestamp freezing in the hardware via watchdog mechanism. This situation can occur when an Rx timestamp has been latched, but the packet has been dropped because the Rx ring is full. Whenever a packet comes in that should be timestamped, the Rx timestamp gets latched into the hardware registers and we will store the jiffy value in the rx_ring. The watchdog will keep track of his own jiffy timer whenever there is no valid timestamp in the registers. If the watchdog detects a valid timestamp in the registers, meaning that no Rx packet has consumed it yet, it will check which time is most recent: the last time in the watchdog or any time in the rx_rings. If the most recent "event" was more than 5 seconds ago, it will flush the Rx timestamp and print a warning message to the syslog. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Acked-by:
-
Matthew Vick authored
When transmitting a packet that must return a Tx timestamp, a work item gets scheduled to poll for the Tx timestamp being completed in hardware. Add a timeout on this work item of 15 seconds from when the driver gets the skb, after which it will stop polling. Report via stats and system log if this occurs. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Matthew Vick authored
Enable SW timestamping for situations where the user may prefer it over HW timestamping or there may not be HW timestamping. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Carolyn Wyborny authored
Some of our adapters have internal sensors that report thermal data. This patch enables reporting of that data via sysfs. Signed-off-by:
Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by:
Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by:
-
Carolyn Wyborny authored
Some of our devices have internal sensors for reporting thermal data. This patch creates the interface to the sensors for exporting via sysfs. Subsequent patch will actually export the data. Signed-off-by:
-
Carolyn Wyborny authored
Some of our adapters have sensors on them accessible via i2c and a private interface. This patch implements the kernel interface for i2c to those sensors. Subsequent patches will provide functions to export that data. Signed-off-by:
-
Greg Rose authored
Implement callback in the driver for the new PCI bus driver interface that allows the user to enable/disable SR-IOV virtual functions in a device via the sysfs interface. Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Tested-by:
-
Bruce Allan authored
On 82574, 82583, 82579, I217 and I218 add support for hardware time stamping of all or no Rx packets and Tx packets which have the SKBTX_HW_TSTAMP flag set. Update the .get_ts_info ethtool operation to report the supported time stamping modes, and enable and disable hardware time stamping with the SIOCSHWTSTAMP ioctl. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
-
Bjorn Helgaas authored
Use the standard #defines for PCIe Capability ASPM fields. Previously we used PCIE_LINK_STATE_L0S and PCIE_LINK_STATE_L1 directly, but these are defined for the Linux ASPM interfaces, e.g., pci_disable_link_state(), and only coincidentally match the actual register bits. PCIE_LINK_STATE_CLKPM, also part of that interface, does not match the register bit. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> CC: e1000-devel@lists.sourceforge.net Acked-by:
-
Bruce Allan authored
Add the ability to query and set Energy Efficient Ethernet parameters via ethtool for applicable devices. Signed-off-by:
-
- 17 Jan, 2013 11 commits
-
-
YOSHIFUJI Hideaki / 吉藤英明 authored
CC: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
If neigh is not found, create new one. Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
For RTF_GATEWAY route, return rt->rt6i_gateway. Otherwise, return 2nd argument (destination address). This will be used by following patches which remove rt->n dependency patches in ip6_dst_lookup_tail() and ip6_finish_output2(). Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
CC: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
This function, which looks up neighbour entry for an IPv6 address without touching refcnt, will be used for patches to remove dependency on rt->n (neighbour entry in rt6_info). Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Do not depend on rt->n. Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
We can refer to nd_tbl directly. Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
neigh->nud_state and neigh->updated are under protection of neigh->lock. Signed-off-by:
-
