Pull char/misc driver updates from Greg KH:
 "Here's the big char/misc driver patches for 4.10-rc1. Lots of tiny
  changes over lots of "minor" driver subsystems, the largest being some
  new FPGA drivers. Other than that, a few other new drivers, but no new
  driver subsystems added for this kernel cycle, a nice change.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (107 commits)
  uio-hv-generic: store physical addresses instead of virtual
  Tools: hv: kvp: configurable external scripts path
  uio-hv-generic: new userspace i/o driver for VMBus
  vmbus: add support for dynamic device id's
  hv: change clockevents unbind tactics
  hv: acquire vmbus_connection.channel_mutex in vmbus_free_channels()
  hyperv: Fix spelling of HV_UNKOWN
  mei: bus: enable non-blocking RX
  mei: fix the back to back interrupt handling
  mei: synchronize irq before initiating a reset.
  VME: Remove shutdown entry from vme_driver
  auxdisplay: ht16k33: select framebuffer helper modules
  MAINTAINERS: add git url for fpga
  fpga: Clarify how write_init works streaming modes
  fpga zynq: Fix incorrect ISR state on bootup
  fpga zynq: Remove priv->dev
  fpga zynq: Add missing \n to messages
  fpga: Add COMPILE_TEST to all drivers
  uio: pruss: add clk_disable()
  char/pcmcia: add some error checking in scr24x_read()
  ...

Merge tag 'driver-core-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here's the new driver core patches for 4.10-rc1.

  Big thing here is the nice addition of "functional dependencies" to
  the driver core. The idea has been talked about for a very long time,
  great job to Rafael for stepping up and implementing it. It's been
  tested for longer than the 4.9-rc1 date, we held off on merging it
  earlier in order to feel more comfortable about it.

  Other than that, it's just a handful of small other patches, some good
  cleanups to the mess that is the firmware class code, and we have a
  test driver for the deferred probe logic.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (30 commits)
  firmware: Correct handling of fw_state_wait() return value
  driver core: Silence device links sphinx warning
  firmware: remove warning at documentation generation time
  drivers: base: dma-mapping: Fix typo in dmam_alloc_non_coherent comments
  driver core: test_async: fix up typo found by 0-day
  firmware: move fw_state_is_done() into UHM section
  firmware: do not use fw_lock for fw_state protection
  firmware: drop bit ops in favor of simple state machine
  firmware: refactor loading status
  firmware: fix usermode helper fallback loading
  driver core: firmware_class: convert to use class_groups
  driver core: devcoredump: convert to use class_groups
  driver core: class: add class_groups support
  kernfs: Declare two local data structures static
  driver-core: fix platform_no_drv_owner.cocci warnings
  drivers/base/memory.c: Remove unused 'first_page' variable
  driver core: add CLASS_ATTR_WO()
  drivers: base: cacheinfo: support DT overrides for cache properties
  drivers: base: cacheinfo: add pr_fmt logging
  drivers: base: cacheinfo: fix boot error message when acpi is enabled
  ...

Pull staging/IIO updates from Greg KH:
 "Here's the "big" staging/iio pull request for 4.10-rc1.

  Not as big as 4.9 was, but still just over a thousand changes. We
  almost broke even of lines added vs. removed, as the slicoss driver
  was removed (got a "clean" driver for the same hardware through the
  netdev tree), and some iio drivers were also dropped, but I think we
  ended up adding a few thousand lines to the source tree in the end.
  Other than that it's a lot of minor fixes all over the place, nothing
  major stands out at all.

  All of these have been in linux-next for a while. There will be a
  merge conflict with Al's vfs tree in the lustre code, but the
  resolution for that should be pretty simple, that too has been in
  linux-next"

* tag 'staging-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1002 commits)
  staging: comedi: comedidev.h: Document usage of 'detach' handler
  staging: fsl-mc: remove unnecessary info prints from bus driver
  staging: fsl-mc: add sysfs ABI doc
  staging/lustre/o2iblnd: Fix misspelled attemps->attempts
  staging/lustre/o2iblnd: Fix misspelling intialized->intialized
  staging/lustre: Convert all bare unsigned to unsigned int
  staging/lustre/socklnd: Fix whitespace problem
  staging/lustre/o2iblnd: Add missing space
  staging/lustre/lnetselftest: Fix potential integer overflow
  staging: greybus: audio_module: remove redundant OOM message
  staging: dgnc: Fix lines longer than 80 characters
  staging: dgnc: fix blank line after '{' warnings.
  staging/android: remove Sync Framework tasks from TODO
  staging/lustre/osc: Revert erroneous list_for_each_entry_safe use
  staging: slicoss: remove the staging driver
  staging: lustre: libcfs: remove lnet upcall code
  staging: lustre: remove set but unused variables
  staging: lustre: osc: set lock data for readahead lock
  staging: lustre: import: don't reconnect during connect interpret
  staging: lustre: clio: remove mtime check in vvp_io_fault_start()
  ...

Pull tty/serial updates from Greg KH:
 "Here's the tty/serial patchset for 4.10-rc1.

  It's been a quiet kernel cycle for this subsystem, just a small number
  of changes. A few new serial drivers, and some cleanups to the old
  vgacon logic, and other minor serial driver changes as well.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (54 commits)
  serial: 8250_mid fix calltrace when hotplug 8250 serial controller
  console: Move userspace I/O out of console_lock to fix lockdep warning
  tty: nozomi: avoid sprintf buffer overflow
  serial: 8250_pci: Detach low-level driver during PCI error recovery
  serial: core: don't check port twice in a row
  mxs-auart: count FIFO overrun errors
  serial: 8250_dw: Add support for IrDA SIR mode
  serial: 8250: Expose set_ldisc function
  serial: 8250: Add IrDA to UART capabilities
  serial: 8250_dma: power off device after TX is done
  serial: 8250_port: export serial8250_rpm_{get|put}_tx()
  serial: sunsu: Free memory when probe fails
  serial: sunhv: Free memory when remove() is called
  vt: fix Scroll Lock LED trigger name
  tty: typo in comments in drivers/tty/vt/keyboard.c
  tty: amba-pl011: Add earlycon support for SBSA UART
  tty: nozomi: use permission-specific DEVICE_ATTR variants
  tty: serial: Make the STM32 serial port depend on it's arch
  serial: ifx6x60: Free memory when probe fails
  serial: ioc4_serial: Free memory when kzalloc fails during probe
  ...

Pull USB/PHY updates from Greg KH:
 "Here's the big set of USB/PHY patches for 4.10-rc1.

  A number of new drivers are here in this set of changes. We have a new
  USB controller type "mtu3", a new usb-serial driver, and the usual
  churn in the gadget subsystem and the xhci host controller driver,
  along with a few other new small drivers added. And lots of little
  other changes all over the USB and PHY driver tree. Full details are
  in the shortlog

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (309 commits)
  USB: serial: option: add dlink dwm-158
  USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041
  USB: OHCI: nxp: fix code warnings
  USB: OHCI: nxp: remove useless extern declaration
  USB: OHCI: at91: remove useless extern declaration
  usb: misc: rio500: fix result type for error message
  usb: mtu3: fix U3 port link issue
  usb: mtu3: enable auto switch from U3 to U2
  usbip: fix warning in vhci_hcd_probe/lockdep_init_map
  usb: core: usbport: Use proper LED API to fix potential crash
  usbip: add missing compile time generated files to .gitignore
  usb: hcd.h: construct hub class request constants from simpler constants
  USB: OHCI: ohci-pxa27x: remove useless functions
  USB: OHCI: omap: remove useless extern declaration
  USB: OHCI: ohci-omap: remove useless functions
  USB: OHCI: ohci-s3c2410: remove useless functions
  USB: cdc-acm: add device id for GW Instek AFG-125
  fsl/usb: Workarourd for USB erratum-A005697
  usb: hub: Wait for connection to be reestablished after port reset
  usbip: vudc: Refactor init_vudc_hw() to be more obvious
  ...

Pull ACPI updates from Rafael Wysocki:
 "The ACPICA code in the kernel gets updated as usual (included is
  upstream revision 20160930 and a few commits from the next one, with
  the rest waiting for an issue discovered in linux-next to be
  addressed) which brings in a couple of fixes and cleanups

  On top of that initial support for APEI on ARM64 is added, two new
  pieces of documentation are introduced, the properties-parsing code is
  updated to follow changes in the (external) documentation it is based
  on and there are a few updates of SoC drivers, some new blacklist
  entries, plus some assorted fixes and cleanups

  Specifics:

   - ACPICA update including upstream revision 20160930 and several
     commits beyond it (Bob Moore, Lv Zheng)

   - Initial support for ACPI APEI on ARM64 (Tomasz Nowicki)

   - New document describing the handling of _OSI and _REV in Linux (Len
     Brown)

   - New document describing the usage rules for _DSD properties (Rafael
     Wysocki)

   - Update of the ACPI properties-parsing code to reflect recent
     changes in the (external) documentation it is based on (Rafael
     Wysocki)

   - Updates of the ACPI LPSS and ACPI APD SoC drivers for additional
     hardware support (Andy Shevchenko, Nehal Shah)

   - New blacklist entries for _REV and video handling (Alex Hung, Hans
     de Goede, Michael Pobega)

   - ACPI battery driver fix to fall back to _BIF if _BIX fails (Dave
     Lambley)

   - NMI notifications handling fix for APEI (Prarit Bhargava)

   - Error code path fix for the ACPI CPPC library (Dan Carpenter)

   - Assorted cleanups (Andy Shevchenko, Longpeng Mike)"

* tag 'acpi-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (31 commits)
  ACPICA: Utilities: Add new decode function for parser values
  ACPI / osl: Refactor acpi_os_get_root_pointer() to drop 'else':s
  ACPI / osl: Propagate actual error code for kstrtoul()
  ACPI / property: Document usage rules for _DSD properties
  ACPI: Document _OSI and _REV for Linux BIOS writers
  ACPI / APEI / ARM64: APEI initial support for ARM64
  ACPI / APEI: Fix NMI notification handling
  ACPICA: Tables: Add an error message complaining driver bugs
  ACPICA: Tables: Add acpi_tb_unload_table()
  ACPICA: Tables: Cleanup acpi_tb_install_and_load_table()
  ACPICA: Events: Fix acpi_ev_initialize_region() return value
  ACPICA: Back port of "ACPICA: Dispatcher: Tune interpreter lock around AcpiEvInitializeRegion()"
  ACPICA: Namespace: Add acpi_ns_handle_to_name()
  ACPI / CPPC: set an error code on probe error path
  ACPI / video: Add force_native quirk for HP Pavilion dv6
  ACPI / video: Add force_native quirk for Dell XPS 17 L702X
  ACPI / property: Hierarchical properties support update
  ACPI / LPSS: enable hard LLP for DMA
  ACPI / battery: If _BIX fails, retry with _BIF
  ACPI / video: Move ACPI_VIDEO_NOTIFY_* defines to acpi/video.h
  ..

Pull power management updates from Rafael Wysocki:
 "Again, cpufreq gets more changes than the other parts this time (one
  new driver, one old driver less, a bunch of enhancements of the
  existing code, new CPU IDs, fixes, cleanups)

  There also are some changes in cpuidle (idle injection rework, a
  couple of new CPU IDs, online/offline rework in intel_idle, fixes and
  cleanups), in the generic power domains framework (mostly related to
  supporting power domains containing CPUs), and in the Operating
  Performance Points (OPP) library (mostly related to supporting devices
  with multiple voltage regulators)

  In addition to that, the system sleep state selection interface is
  modified to make it easier for distributions with unchanged user space
  to support suspend-to-idle as the default system suspend method, some
  issues are fixed in the PM core, the latency tolerance PM QoS
  framework is improved a bit, the Intel RAPL power capping driver is
  cleaned up and there are some fixes and cleanups in the devfreq
  subsystem

  Specifics:

   - New cpufreq driver for Broadcom STB SoCs and a Device Tree binding
     for it (Markus Mayer)

   - Support for ARM Integrator/AP and Integrator/CP in the generic DT
     cpufreq driver and elimination of the old Integrator cpufreq driver
     (Linus Walleij)

   - Support for the zx296718, r8a7743 and r8a7745, Socionext UniPhier,
     and PXA SoCs in the the generic DT cpufreq driver (Baoyou Xie,
     Geert Uytterhoeven, Masahiro Yamada, Robert Jarzmik)

   - cpufreq core fix to eliminate races that may lead to using inactive
     policy objects and related cleanups (Rafael Wysocki)

   - cpufreq schedutil governor update to make it use SCHED_FIFO kernel
     threads (instead of regular workqueues) for doing delayed work (to
     reduce the response latency in some cases) and related cleanups
     (Viresh Kumar)

   - New cpufreq sysfs attribute for resetting statistics (Markus Mayer)

   - cpufreq governors fixes and cleanups (Chen Yu, Stratos Karafotis,
     Viresh Kumar)

   - Support for using generic cpufreq governors in the intel_pstate
     driver (Rafael Wysocki)

   - Support for per-logical-CPU P-state limits and the EPP/EPB (Energy
     Performance Preference/Energy Performance Bias) knobs in the
     intel_pstate driver (Srinivas Pandruvada)

   - New CPU ID for Knights Mill in intel_pstate (Piotr Luc)

   - intel_pstate driver modification to use the P-state selection
     algorithm based on CPU load on platforms with the system profile in
     the ACPI tables set to "mobile" (Srinivas Pandruvada)

   - intel_pstate driver cleanups (Arnd Bergmann, Rafael Wysocki,
     Srinivas Pandruvada)

   - cpufreq powernv driver updates including fast switching support
     (for the schedutil governor), fixes and cleanus (Akshay Adiga,
     Andrew Donnellan, Denis Kirjanov)

   - acpi-cpufreq driver rework to switch it over to the new CPU
     offline/online state machine (Sebastian Andrzej Siewior)

   - Assorted cleanups in cpufreq drivers (Wei Yongjun, Prashanth
     Prakash)

   - Idle injection rework (to make it use the regular idle path instead
     of a home-grown custom one) and related powerclamp thermal driver
     updates (Peter Zijlstra, Jacob Pan, Petr Mladek, Sebastian Andrzej
     Siewior)

   - New CPU IDs for Atom Z34xx and Knights Mill in intel_idle (Andy
     Shevchenko, Piotr Luc)

   - intel_idle driver cleanups and switch over to using the new CPU
     offline/online state machine (Anna-Maria Gleixner, Sebastian
     Andrzej Siewior)

   - cpuidle DT driver update to support suspend-to-idle properly
     (Sudeep Holla)

   - cpuidle core cleanups and misc updates (Daniel Lezcano, Pan Bian,
     Rafael Wysocki)

   - Preliminary support for power domains including CPUs in the generic
     power domains (genpd) framework and related DT bindings (Lina Iyer)

   - Assorted fixes and cleanups in the generic power domains (genpd)
     framework (Colin Ian King, Dan Carpenter, Geert Uytterhoeven)

   - Preliminary support for devices with multiple voltage regulators
     and related fixes and cleanups in the Operating Performance Points
     (OPP) library (Viresh Kumar, Masahiro Yamada, Stephen Boyd)

   - System sleep state selection interface rework to make it easier to
     support suspend-to-idle as the default system suspend method
     (Rafael Wysocki)

   - PM core fixes and cleanups, mostly related to the interactions
     between the system suspend and runtime PM frameworks (Ulf Hansson,
     Sahitya Tummala, Tony Lindgren)

   - Latency tolerance PM QoS framework imorovements (Andrew Lutomirski)

   - New Knights Mill CPU ID for the Intel RAPL power capping driver
     (Piotr Luc)

   - Intel RAPL power capping driver fixes, cleanups and switch over to
     using the new CPU offline/online state machine (Jacob Pan, Thomas
     Gleixner, Sebastian Andrzej Siewior)

   - Fixes and cleanups in the exynos-ppmu, exynos-nocp, rk3399_dmc,
     rockchip-dfi devfreq drivers and the devfreq core (Axel Lin,
     Chanwoo Choi, Javier Martinez Canillas, MyungJoo Ham, Viresh Kumar)

   - Fix for false-positive KASAN warnings during resume from ACPI S3
     (suspend-to-RAM) on x86 (Josh Poimboeuf)

   - Memory map verification during resume from hibernation on x86 to
     ensure a consistent address space layout (Chen Yu)

   - Wakeup sources debugging enhancement (Xing Wei)

   - rockchip-io AVS driver cleanup (Shawn Lin)"

* tag 'pm-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (127 commits)
  devfreq: rk3399_dmc: Don't use OPP structures outside of RCU locks
  devfreq: rk3399_dmc: Remove dangling rcu_read_unlock()
  devfreq: exynos: Don't use OPP structures outside of RCU locks
  Documentation: intel_pstate: Document HWP energy/performance hints
  cpufreq: intel_pstate: Support for energy performance hints with HWP
  cpufreq: intel_pstate: Add locking around HWP requests
  PM / sleep: Print active wakeup sources when blocking on wakeup_count reads
  PM / core: Fix bug in the error handling of async suspend
  PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend
  PM / Domains: Fix compatible for domain idle state
  PM / OPP: Don't WARN on multiple calls to dev_pm_opp_set_regulators()
  PM / OPP: Allow platform specific custom set_opp() callbacks
  PM / OPP: Separate out _generic_set_opp()
  PM / OPP: Add infrastructure to manage multiple regulators
  PM / OPP: Pass struct dev_pm_opp_supply to _set_opp_voltage()
  PM / OPP: Manage supply's voltage/current in a separate structure
  PM / OPP: Don't use OPP structure outside of rcu protected section
  PM / OPP: Reword binding supporting multiple regulators per device
  PM / OPP: Fix incorrect cpu-supply property in binding
  cpuidle: Add a kerneldoc comment to cpuidle_use_deepest_state()
  ..

Pull block layer updates from Jens Axboe:
 "This is the main block pull request this series. Contrary to previous
  release, I've kept the core and driver changes in the same branch. We
  always ended up having dependencies between the two for obvious
  reasons, so makes more sense to keep them together. That said, I'll
  probably try and keep more topical branches going forward, especially
  for cycles that end up being as busy as this one.

  The major parts of this pull request is:

   - Improved support for O_DIRECT on block devices, with a small
     private implementation instead of using the pig that is
     fs/direct-io.c. From Christoph.

   - Request completion tracking in a scalable fashion. This is utilized
     by two components in this pull, the new hybrid polling and the
     writeback queue throttling code.

   - Improved support for polling with O_DIRECT, adding a hybrid mode
     that combines pure polling with an initial sleep. From me.

   - Support for automatic throttling of writeback queues on the block
     side. This uses feedback from the device completion latencies to
     scale the queue on the block side up or down. From me.

   - Support from SMR drives in the block layer and for SD. From Hannes
     and Shaun.

   - Multi-connection support for nbd. From Josef.

   - Cleanup of request and bio flags, so we have a clear split between
     which are bio (or rq) private, and which ones are shared. From
     Christoph.

   - A set of patches from Bart, that improve how we handle queue
     stopping and starting in blk-mq.

   - Support for WRITE_ZEROES from Chaitanya.

   - Lightnvm updates from Javier/Matias.

   - Supoort for FC for the nvme-over-fabrics code. From James Smart.

   - A bunch of fixes from a whole slew of people, too many to name
     here"

* 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits)
  blk-stat: fix a few cases of missing batch flushing
  blk-flush: run the queue when inserting blk-mq flush
  elevator: make the rqhash helpers exported
  blk-mq: abstract out blk_mq_dispatch_rq_list() helper
  blk-mq: add blk_mq_start_stopped_hw_queue()
  block: improve handling of the magic discard payload
  blk-wbt: don't throttle discard or write zeroes
  nbd: use dev_err_ratelimited in io path
  nbd: reset the setup task for NBD_CLEAR_SOCK
  nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME
  nvme-fabrics: Add target support for FC transport
  nvme-fabrics: Add host support for FC transport
  nvme-fabrics: Add FC transport LLDD api definitions
  nvme-fabrics: Add FC transport FC-NVME definitions
  nvme-fabrics: Add FC transport error codes to nvme.h
  Add type 0x28 NVME type code to scsi fc headers
  nvme-fabrics: patch target code in prep for FC transport support
  nvme-fabrics: set sqe.command_id in core not transports
  parser: add u64 number parser
  nvme-rdma: align to generic ib_event logging helper
  ...

Pull drm updates from Dave Airlie:
 "This is the main pull request for drm for 4.10 kernel.

  New drivers:
   - ZTE VOU display driver (zxdrm)
   - Amlogic Meson Graphic Controller GXBB/GXL/GXM SoCs (meson)
   - MXSFB support (mxsfb)

  Core:
   - Format handling has been reworked
   - Better atomic state debugging
   - drm_mm leak debugging
   - Atomic explicit fencing support
   - fbdev helper ops
   - Documentation updates
   - MST fbcon fixes

  Bridge:
   - Silicon Image SiI8620 driver

  Panel:
   - Add support for new simple panels

  i915:
   - GVT Device model
   - Better HDMI2.0 support on skylake
   - More watermark fixes
   - GPU idling rework for suspend/resume
   - DP Audio workarounds
   - Scheduler prep-work
   - Opregion CADL handling
   - GPU scheduler and priority boosting

  amdgfx/radeon:
   - Support for virtual devices
   - New VM manager for non-contig VRAM buffers
   - UVD powergating
   - SI register header cleanup
   - Cursor fixes
   - Powermanagement fixes

  nouveau:
   - Powermangement reworks for better voltage/clock changes
   - Atomic modesetting support
   - Displayport Multistream (MST) support.
   - GP102/104 hang and cursor fixes
   - GP106 support

  hisilicon:
   - hibmc support (BMC chip for aarch64 servers)

  armada:
   - add tracing support for overlay change
   - refactor plane support
   - de-midlayer the driver

  omapdrm:
   - Timing code cleanups

  rcar-du:
   - R8A7792/R8A7796 support
   - Misc fixes.

  sunxi:
   - A31 SoC display engine support

  imx-drm:
   - YUV format support
   - Cleanup plane atomic update

  mali-dp:
   - Misc fixes

  dw-hdmi:
   - Add support for HDMI i2c master controller

  tegra:
   - IOMMU support fixes
   - Error handling fixes

  tda998x:
   - Fix connector registration
   - Improved robustness
   - Fix infoframe/audio compliance

  virtio:
   - fix busid issues
   - allocate more vbufs

  qxl:
   - misc fixes and cleanups.

  vc4:
   - Fragment shader threading
   - ETC1 support
   - VEC (tv-out) support

  msm:
   - A5XX GPU support
   - Lots of atomic changes

  tilcdc:
   - Misc fixes and cleanups.

  etnaviv:
   - Fix dma-buf export path
   - DRAW_INSTANCED support
   - fix driver on i.MX6SX

  exynos:
   - HDMI refactoring

  fsl-dcu:
   - fbdev changes"

* tag 'drm-for-v4.10' of git://people.freedesktop.org/~airlied/linux: (1343 commits)
  drm/nouveau/kms/nv50: fix atomic regression on original G80
  drm/nouveau/bl: Do not register interface if Apple GMUX detected
  drm/nouveau/bl: Assign different names to interfaces
  drm/nouveau/bios/dp: fix handling of LevelEntryTableIndex on DP table 4.2
  drm/nouveau/ltc: protect clearing of comptags with mutex
  drm/nouveau/gr/gf100-: handle GPC/TPC/MPC trap
  drm/nouveau/core: recognise GP106 chipset
  drm/nouveau/ttm: wait for bo fence to signal before unmapping vmas
  drm/nouveau/gr/gf100-: FECS intr handling is not relevant on proprietary ucode
  drm/nouveau/gr/gf100-: properly ack all FECS error interrupts
  drm/nouveau/fifo/gf100-: recover from host mmu faults
  drm: Add fake controlD* symlinks for backwards compat
  drm/vc4: Don't use drm_put_dev
  drm/vc4: Document VEC DT binding
  drm/vc4: Add support for the VEC (Video Encoder) IP
  drm: Add TV connector states to drm_connector_state
  drm: Turn DRM_MODE_SUBCONNECTOR_xx definitions into an enum
  drm/vc4: Fix ->clock_select setting for the VEC encoder
  drm/amdgpu/dce6: Set MASTER_UPDATE_MODE to 0 in resume_mc_access as well
  drm/amdgpu: use pin rather than pin_restricted in a few cases
  ...

Pull fbdev update from Tomi Valkeinen:
 "No one has stepped up to take the job, so I've marked fbdev as orphan"

* tag 'fbdev-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  fbdev: remove current maintainer

Pull VFIO updates from Alex Williamson:

 - VFIO updates for v4.10 primarily include a new Mediated Device
   interface, which essentially allows software defined devices to be
   exposed to users through VFIO. The host vendor driver providing this
   virtual device polices, or mediates user access to the device.

   These devices often incorporate portions of real devices, for
   instance the primary initial users of this interface expose vGPUs
   which allow the user to map mediated devices, or mdevs, to a portion
   of a physical GPU. QEMU composes these mdevs into PCI representations
   using the existing VFIO user API. This enables both Intel KVM-GT
   support, which is also expected to arrive into Linux mainline during
   the v4.10 merge window, as well as NVIDIA vGPU, and also Channel I/O
   devices (aka CCW devices) for s390 virtualization support. (Kirti
   Wankhede, Neo Jia)

 - Drop unnecessary uses of pcibios_err_to_errno() (Cao Jin)

 - Fixes to VFIO capability chain handling (Eric Auger)

 - Error handling fixes for fallout from mdev (Christophe JAILLET)

 - Notifiers to expose struct kvm to mdev vendor drivers (Jike Song)

 - type1 IOMMU model search fixes (Kirti Wankhede, Neo Jia)

* tag 'vfio-v4.10-rc1' of git://github.com/awilliam/linux-vfio: (30 commits)
  vfio iommu type1: Fix size argument to vfio_find_dma() in pin_pages/unpin_pages
  vfio iommu type1: Fix size argument to vfio_find_dma() during DMA UNMAP.
  vfio iommu type1: WARN_ON if notifier block is not unregistered
  kvm: set/clear kvm to/from vfio_group when group add/delete
  vfio: support notifier chain in vfio_group
  vfio: vfio_register_notifier: classify iommu notifier
  vfio: Fix handling of error returned by 'vfio_group_get_from_dev()'
  vfio: fix vfio_info_cap_add/shift
  vfio/pci: Drop unnecessary pcibios_err_to_errno()
  MAINTAINERS: Add entry VFIO based Mediated device drivers
  docs: Sample driver to demonstrate how to use Mediated device framework.
  docs: Sysfs ABI for mediated device framework
  docs: Add Documentation for Mediated devices
  vfio: Define device_api strings
  vfio_platform: Updated to use vfio_set_irqs_validate_and_prepare()
  vfio_pci: Updated to use vfio_set_irqs_validate_and_prepare()
  vfio: Introduce vfio_set_irqs_validate_and_prepare()
  vfio_pci: Update vfio_pci to use vfio_info_add_capability()
  vfio: Introduce common function to add capabilities
  vfio iommu: Add blocking notifier to notify DMA_UNMAP
  ...

Pull gcc plugins updates from Kees Cook:
 "Minor changes to the gcc plugins:

   - add the gcc plugins Makefile to MAINTAINERS to route things
     correctly

   - hide cyc_complexity behind !CONFIG_TEST for the future unhiding of
     plugins generally"

* tag 'gcc-plugins-v4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  gcc-plugins: Adjust Kconfig to avoid cyc_complexity
  MAINTAINERS: add GCC plugins Makefile

Pull pstore updates from Kees Cook:
 "Improvements and fixes to pstore subsystem:

   - add additional checks for bad platform data

   - remove bounce buffer in console writer

   - protect read/unlink race with a mutex

   - correctly give up during dump locking failures

   - increase ftrace bandwidth by splitting ftrace buffers per CPU"

* tag 'pstore-v4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  ramoops: add pdata NULL check to ramoops_probe
  pstore: Convert console write to use ->write_buf
  pstore: Protect unlink with read_mutex
  pstore: Use global ftrace filters for function trace filtering
  ftrace: Provide API to use global filtering for ftrace ops
  pstore: Clarify context field przs as dprzs
  pstore: improve error report for failed setup
  pstore: Merge per-CPU ftrace records into one
  pstore: Add ftrace timestamp counter
  ramoops: Split ftrace buffer space into per-CPU zones
  pstore: Make ramoops_init_przs generic for other prz arrays
  pstore: Allow prz to control need for locking
  pstore: Warn on PSTORE_TYPE_PMSG using deprecated function
  pstore: Make spinlock per zone instead of global
  pstore: Actually give up during locking failure

Pull EDAC updates from Borislav Petkov:

 - add KNM support to sb_edac (Piotr Luc)

 - add AMD Zen support to amd64_edac (Yazen Ghannam)

 - misc small cleanups, improvements and fixes (Colin Ian King, Dave
   Hansen, Pan Bian, Thor Thayer, Wei Yongjun, Yanjiang Jin, yours
   truly)

* tag 'edac_for_4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (26 commits)
  EDAC, amd64: Fix improper return value
  EDAC, amd64: Improve amd64-specific printing macros
  EDAC, amd64: Autoload amd64_edac_mod on Fam17h systems
  EDAC, amd64: Define and register UMC error decode function
  EDAC, amd64: Determine EDAC capabilities on Fam17h systems
  EDAC, amd64: Determine EDAC MC capabilities on Fam17h
  EDAC, amd64: Add Fam17h debug output
  EDAC, amd64: Add Fam17h scrubber support
  EDAC, mce_amd: Don't report poison bit on Fam15h, bank 4
  EDAC, amd64: Read MC registers on AMD Fam17h
  EDAC, amd64: Reserve correct PCI devices on AMD Fam17h
  EDAC, amd64: Add AMD Fam17h family type and ops
  EDAC, amd64: Extend ecc_enabled() to Fam17h
  EDAC, amd64: Don't force-enable ECC checking on newer systems
  EDAC, amd64: Add Deferred Error type
  EDAC, amd64: Rename __log_bus_error() to be more specific
  EDAC, amd64: Change target of pci_name from F2 to F3
  EDAC, mce_amd: Rename nb_bus_decoder to dram_ecc_decoder
  EDAC: Add LRDDR4 DRAM type
  EDAC, mpc85xx: Implement remove method for the platform driver
  ...

Pull thermal management updates from Zhang Rui:

 - Thermal core code reorganization and cleanup. Two new files are
   created for thermal sysfs I/F code and thermal helper functions
   (Eduardo Valentin).

 - Sanitize hotplug and locking for x86_pkg_temp driver (Thomas
   Gleixner)

 - Update MAINTAINER file for pwm-fan driver and Samsung thermal driver
   (Lukasz Majewski)

 - Fix module auto-load for max77620, tango and db8500 thermal driver
   (Javier Martinez Canillas)

 - Fix a bug that thermal hwmon sysfs I/F returns wrong critical trip
   point temperature value (Krzysztof Kozlowski)

 - Add Skylake PCH 100 series support for intel_pch_thermal driver
   (OGAWA Hirofumi)

 - Small fixes and cleanups for platform thermal drivers (Julia Lawall,
   Luis Henriques, Leo Yan, Stephen Boyd, Shawn Lin, Javi Merino and
   Lukasz Luba)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (76 commits)
  MAINTAINERS: Samsung: Update maintainer for PWM FAN and SAMSUNG THERMAL
  thermal/x86 pkg temp: Convert to hotplug state machine
  thermal/x86_pkg_temp: Sanitize package management
  thermal/x86_pkg_temp: Move work into package struct
  thermal/x86_pkg_temp: Move work scheduled flag into package struct
  thermal/x86_pkg_temp: Sanitize locking
  thermal/x86_pkg_temp: Cleanup code some more
  thermal/x86_pkg_temp: Cleanup namespace
  thermal/x86_pkg_temp: Get rid of ref counting
  thermal/x86_pkg_temp: Sanitize callback (de)initialization
  thermal/x86_pkg_temp: Replace open coded cpu search
  thermal/x86_pkg_temp: Remove redundant package search
  thermal/x86_pkg_temp: Cleanup thermal interrupt handling
  thermal: hwmon: Properly report critical temperature in sysfs
  devfreq_cooling: pass a pointer to devfreq in the power model callbacks
  devfreq_cooling: make the structs devfreq_cooling_xxx visible for all
  dt-bindings: rockchip-thermal: fix the misleading description
  thermal: rockchip: improve the warning log
  thermal: db8500: Fix module autoload
  thermal: tango: Fix module autoload
  ...

Pull clk updates from Stephen Boyd:
 "This is a fairly quiet release. We don't have any patches to the core
  framework. The only patch that can even be considered "core" adds
  another clk_get() variant. The rest of the changes are in drivers for
  various SoCs, and we have a few bits for ARM shmobile architecture
  code (dts and mach) due to the dependency we're breaking between
  shmobile architecture code and its clk driver. Those shmobile bits
  have also been pulled into arm-soc tree. Here's the summary:

  Core:

   - Support for devm_get_clk_from_child() used with DT bindings that
     have subnodes with the 'clocks' property

  New Drivers:

   - Allwinner A64 (sun50i)
   - i.MX imx6ull
   - Socionext's UniPhier SoC CPUs
   - Mediatek MT2701 SoCs
   - Rockchip rk1108 SoCs
   - Qualcomm MSM8994/MSM8992 SoCS
   - Qualcomm RPM Clocks
   - Hisilicon Hi3516CV300 and Hi3798CV200 CRG
   - Oxford Semiconductor OX820 and OX810SE SoCs
   - Renesas RZ/G1M and RZ/GIE SoCs
   - Renesas R-Car RST driver for mode pin states

  Updates:

   - Four Allwinner SoCs are migrated to the new style clk driver
   - Rockchip rk3399,rk3066 PLL optimizations
   - i.MX LVDS display glitch fixes and AV PLL precision improvements
   - Qualcomm MSM8996 GPU GDSCs, hw controlled GDSCs, and Alpha PLL
     support
   - Explicit demodularization of always builtin drivers
   - Freescale Qoriq ls1012a and ls1046a support
   - Exynos 5433 parent typo fix and critical clock tagging
   - Renesas r8a7743/r8a7745 CPG
   - Renesas R-Car M3-W CSI2/VIN/SYS-DMAC/(H)SCIF/I2C/DRIF/gfx support
   - stm32f4* LSI, LSE, RTC, and QSPI clocks
   - pxa27x and pxa25x cpufreq as clks
   - TI omap36xx sprz319 advisory 2.1 workaround
   - Broadcom bcm2835 rate change propogation to PLLH_AUX from VEC"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
  clk: bcm: Fix 'maybe-uninitialized' warning in bcm2835_clock_choose_div_and_prate()
  clk: add devm_get_clk_from_child() API
  clk: st: clk-flexgen: Unmap region obtained by of_iomap
  clk: keystone: pll: Unmap region obtained by of_iomap
  clk:mmp:clk-of-mmp2: Free memory and Unmap region obtained by kzalloc and of_iomap
  clk:mmp:clk-of-pxa910: Free memory and Unmap region obtained by kzmalloc and of_iomap
  clk: mmp: clk-of-pxa1928: Free memory obtained by kzalloc
  clk: cdce925: Fix limit check
  clk: bcm: Make COMMON_CLK_IPROC into a library
  clk: qoriq: added ls1012a clock configuration
  clk: ti: dra7: fix "failed to lookup clock node gmac_gmii_ref_clk_div" boot message
  clk: bcm: Allow rate change propagation to PLLH_AUX on VEC clock
  clk: bcm: Support rate change propagation on bcm2835 clocks
  clk: bcm2835: Avoid overwriting the div info when disabling a pll_div clk
  clk: ti: omap36xx: Work around sprz319 advisory 2.1
  clk: clk-wm831x: fix a logic error
  clk: uniphier: add cpufreq data for LD11, LD20 SoCs
  clk: uniphier: add CPU-gear change (cpufreq) support
  clk: qcom: Put venus core0/1 gdscs to hw control mode
  clk: qcom: gdsc: Add support for gdscs with HW control
  ...

Pull rpmsg updates from Bjorn Andersson:
 "Argument validation in public functions, function stubs for
  COMPILE_TEST-ing clients, preparation for exposing rpmsg endponts
  to user space and minor Qualcomm SMD fixes"

* tag 'rpmsg-v4.10' of git://github.com/andersson/remoteproc:
  dt-binding: soc: qcom: smd: Add label property
  rpmsg: qcom_smd: Correct return value for O_NONBLOCK
  rpmsg: Provide function stubs for API
  rpmsg: Handle invalid parameters in public API
  rpmsg: Support drivers without primary endpoint
  rpmsg: Introduce a driver override mechanism
  rpmsg: smd: Reduce restrictions when finding channel

Pull remoteproc updates from Bjorn Andersson:

 - introduce remoteproc "subdevice" support, which allows remoteproc
   driver to associate devices to the "running" state of the remoteproc,
   allowing devices to be probed and removed as the remote processor is
   booted, shut down or recovering from a crash.

 - handling of virtio device resources was improved, vring memory is now
   allocated as part of other memory allocation. This ensures that all
   vrings for all virtio devices are allocated before we boot the remote
   processor.

 - the debugfs mechanism for starting and stopping remoteproc instances
   was replaced with a sysfs interface, also providing a mechanism for
   specifying firmware to use by the instance. This allows user space to
   load and boot use case specific firmware on remote processors.

 - new drivers for the ST Slimcore and Qualcomm Hexagon DSP as well as
   removal of the unused StE modem loader.

 - finally support for crash recovery in the Qualcomm Wirelss subsystem
   (used for WiFi/BT/FM on a number of platforms) and a number of bug
   fixes and cleanups

* tag 'rproc-v4.10' of git://github.com/andersson/remoteproc: (49 commits)
  remoteproc: qcom_adsp_pil: select qcom_scm
  remoteproc: Drop wait in __rproc_boot()
  remoteproc/ste: Delete unused driver
  remoteproc: Remove "experimental" warning
  remoteproc: qcom_adsp_pil: select qcom_scm
  dt-binding: soc: qcom: smd: Add label property
  remoteproc: qcom: mdt_loader: add include for sizes
  remoteproc: Update last rproc_put users to rproc_free
  remoteproc: qcom: adsp: Add missing MODULE_DEVICE_TABLE
  remoteproc: wcnss-pil: add QCOM_SMD dependency
  dmaengine: st_fdma: Revert: "Revert: Update st_fdma to 'depends on REMOTEPROC'"
  remoteproc: Add support for xo clock
  remoteproc: adsp-pil: fix recursive dependency
  remoteproc: Introduce Qualcomm ADSP PIL
  dt-binding: remoteproc: Introduce ADSP loader binding
  remoteproc: qcom_wcnss: Fix circular module dependency
  remoteproc: Merge table_ptr and cached_table pointers
  remoteproc: Remove custom vdev handler list
  remoteproc: Update max_notifyid as we allocate vrings
  remoteproc: Decouple vdev resources and devices
  ...

Pull MMC updates from Ulf Hansson:
 "It's been an busy period for mmc. Quite some changes in the mmc core,
  two new mmc host drivers, some existing drivers being extended to
  support new IP versions and lots of other updates.

  MMC core:
   - Delete eMMC packed command support
   - Introduce mmc_abort_tuning() to enable eMMC tuning to fail
     gracefully
   - Introduce mmc_can_retune() to see if a host can be retuned
   - Re-work and improve the sequence when sending a CMD6 for mmc
   - Enable CDM13 polling when switching to HS and HS DDR mode for mmc
   - Relax checking for CMD6 errors after switch to HS200
   - Re-factoring the code dealing with the mmc block queue
   - Recognize whether the eMMC card supports CMDQ
   - Fix 4K native sector check
   - Don't power off the card when starting the host
   - Increase MMC_IOC_MAX_BYTES to support bigger firmware binaries
   - Improve error handling and drop meaningless BUG_ONs()
   - Lots of clean-ups and changes to improve the quality of the code

  MMC host:
   - sdhci: Fix tuning sequence and clean-up the related code
   - sdhci: Add support to via DT override broken SDHCI cap register
     bits
   - sdhci-cadence: Add new driver for Cadence SD4HC SDHCI variant
   - sdhci-msm: Update clock management
   - sdhci-msm: Add support for eMMC HS400 mode
   - sdhci-msm: Deploy runtime/system PM support
   - sdhci-iproc: Extend driver support to newer IP versions
   - sdhci-pci: Add support for Intel GLK
   - sdhci-pci: Add support for Intel NI byt sdio
   - sdhci-acpi: Add support for 80860F14 UID 2 SDIO bus
   - sdhci: Lots of various small improvements and clean-ups
   - tmio: Add support for tuning
   - sh_mobile_sdhi: Add support for tuning
   - sh_mobile_sdhi: Extend driver to support SDHI IP on R7S72100 SoC
   - sh_mobile_sdhi: remove support for sh7372
   - davinci: Use mmc_of_parse() to enable generic mmc DT bindings
   - meson: Add new driver to support GX platforms
   - dw_mmc: Deploy generic runtime/system PM support
   - dw_mmc: Lots of various small improvements

  As a part of the mmc changes this time, I have also pulled in an
  immutable branch/tag (soc-device-match-tag1) hosted by Geert
  Uytterhoeven, to share the implementation of the new
  soc_device_match() interface. This is needed by these mmc related
  changes:

   - mmc: sdhci-of-esdhc: Get correct IP version for T4240-R1.0-R2.0
   - soc: fsl: add GUTS driver for QorIQ platforms"

* tag 'mmc-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (136 commits)
  mmc: sdhci-cadence: add Cadence SD4HC support
  mmc: sdhci: export sdhci_execute_tuning()
  mmc: sdhci: Tidy tuning loop
  mmc: sdhci: Simplify tuning block size logic
  mmc: sdhci: Factor out tuning helper functions
  mmc: sdhci: Use mmc_abort_tuning()
  mmc: mmc: Introduce mmc_abort_tuning()
  mmc: sdhci: Always allow tuning to fall back to fixed sampling
  mmc: sdhci: Fix tuning reset after exhausting the maximum number of loops
  mmc: sdhci: Fix recovery from tuning timeout
  Revert "mmc: sdhci: Reset cmd and data circuits after tuning failure"
  mmc: mmc: Relax checking for switch errors after HS200 switch
  mmc: sdhci-acpi: support 80860F14 UID 2 SDIO bus
  mmc: sdhci-of-at91: remove bogus MMC_SDHCI_IO_ACCESSORS select
  mmc: sdhci-pci: Use ACPI to get max frequency for Intel NI byt sdio
  mmc: sdhci-pci: Add PCI ID for Intel NI byt sdio
  mmc: sdhci-s3c: add spin_unlock_irq() before calling clk_round_rate
  mmc: dw_mmc: display the clock message only one time when card is polling
  mmc: dw_mmc: add the debug message for polling and non-removable
  mmc: dw_mmc: check the "present" variable before checking flags
  ...

Pull regulator updates from Mark Brown:
 "A quiet release for the regulator API, conference season must've been
  slowing everyone down:

   - a new interface allowing drivers to provide an interface for
     reading a more detailed description of error conditions which
     allows devices using these regulators to build

   - ACPI support for the fixed voltage regulator.

   - cleanups for the TI TWL drivers to reduce code duplication"

* tag 'regulator-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (24 commits)
  regulator: tps65086: Fix 25mV ranges for BUCK regulators 1, 2, and 6
  regulator: Fix regulator_get_error_flags() signature mismatch
  regulator: core: add newline in debug message
  regulator: tps65086: Fix 25mV ranges for BUCK regulators
  regulator: core: Correct type of mode in regulator_mode_constrain
  regulator: max77620: add documentation for MPOK property
  regulator: max77620: add support to configure MPOK
  regulator: twl6030: Remove unused fields from struct twlreg_info
  regulator: twl: Remove unused fields from struct twlreg_info
  regulator: twl: split twl6030 logic into its own file
  regulator: twl: kill unused functions
  regulator: twl: make driver DT only
  regulator: twl-regulator: rework fixed regulator definition
  regulator: max77620: remove unused variable
  regulator: pwm: Add missing quotes to DT example
  regulator: stw481x-vmmc: fix ages old enable error
  regulator: gpio: properly check return value of of_get_named_gpio
  regulator: lp873x: Add support for populating input supply
  regulator: axp20x: Fix axp809 ldo_io registration error on cold boot
  regulators: helpers: Fix handling of bypass_val_on in get_bypass_regmap
  ...

Pull regmap fixlet from Mark Brown:
 "The only change for regmap this merge window is a single fix for an
  unused variable"

* tag 'regmap-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: cache: Remove unused 'blksize' variable

Pull LED updates from Jacek Anaszewski:

 - userspace LED class driver - it can be useful for testing triggers
   and can also be used to implement virtual LEDs

 - LED class driver for NIC78bx device

 - LED core fixes for preventing potential races while setting
   brightness when software blinking is enabled

 - improvements in LED documentation to mention semantics on changing
   brightness while trigger is active

* tag 'leds_for_4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: pca955x: Add ACPI support
  leds: netxbig: fix module autoload for OF registration
  leds: pca963x: Add ACPI support
  leds: leds-cobalt-raq: use builtin_platform_driver
  led: core: Fix blink_brightness setting race
  led: core: Use atomic bit-field for the blink-flags
  leds: Add user LED driver for NIC78bx device
  leds: verify vendor and change license in mlxcpld driver
  leds: pca963x: enable low-power state
  leds: pca9532: Use default trigger value from platform data
  leds: pca963x: workaround group blink scaling issue
  cleanup LED documentation and make it match reality
  leds: lp3952: Export I2C module alias information for module autoload
  leds: mc13783: Fix MC13892 keypad led access
  ledtrig-cpu.c: fix english
  leds/leds-lp5523.txt: make documentation match reality
  tools/leds: Add uledmon program for monitoring userspace LEDs
  leds: Use macro for max device node name size
  leds: Introduce userspace LED class driver
  mfd: qcom-pm8xxx: Clean up PM8XXX namespace

Pull pinctrl updates from Linus Walleij:
 "Bulk pin control changes for the v4.10 kernel cycle:

  No core changes this time. Mainly gradual improvement and
  feature growth in the drivers.

  New drivers:

   - New driver for TI DA850/OMAP-L138/AM18XX pinconf

   - The SX150x was moved over from the GPIO subsystem and reimagined as
     a pin control driver with GPIO support in a joint effort by three
     independent users of this hardware. The result was amazingly good!

   - New subdriver for the Oxnas OX820

  Improvements:

   - The sunxi driver now supports the generic pin control bindings
     rather than the sunxi-specific. Add debouncing support to the
     driver.

   - Simplifications in pinctrl-single adding a generic parser.

   - Two downstream fixes and move the Raspberry Pi BCM2835 over to use
     the generic GPIOLIB_IRQCHIP"

* tag 'pinctrl-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (92 commits)
  pinctrl: sx150x: use new nested IRQ infrastructure
  pinctrl: sx150x: handle missing 'advanced' reg in sx1504 and sx1505
  pinctrl: sx150x: rename 'reg_advance' to 'reg_advanced'
  pinctrl: sx150x: access the correct bits in the 4-bit regs of sx150[147]
  pinctrl: mt8173: set GPIO16 to usb iddig mode
  pinctrl: bcm2835: switch to GPIOLIB_IRQCHIP
  pinctrl: New driver for TI DA850/OMAP-L138/AM18XX pinconf
  devicetree: bindings: pinctrl: Add binding for ti,da850-pupd
  Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition
  pinctrl: intel: set default handler to be handle_bad_irq()
  pinctrl: sx150x: add support for sx1501, sx1504, sx1505 and sx1507
  pinctrl: sx150x: sort chips by part number
  pinctrl: sx150x: use correct registers for reg_sense (sx1502 and sx1508)
  pinctrl: imx: fix imx_pinctrl_desc initialization
  pinctrl: sx150x: support setting multiple pins at once
  pinctrl: sx150x: various spelling fixes and some white-space cleanup
  pinctrl: mediatek: use builtin_platform_driver
  pinctrl: stm32: use builtin_platform_driver
  pinctrl: sunxi: Testing the wrong variable
  pinctrl: nomadik: split up and comments MC0 pins
  ...

Pull GPIO updates from Luinus Walleij:
 "Bulk GPIO changes for the v4.10 kernel cycle:

  Core changes:

   - Simplify threaded interrupt handling: instead of passing numbed
     parameters to gpiochip_irqchip_add_chained() we create a new call:
     gpiochip_irqchip_add_nested() so the two types are clearly
     semantically different. Also make sure that all nested chips call
     gpiochip_set_nested_irqchip() which is necessary for IRQ resend to
     work properly if it happens.

   - Return error on seek operations for the chardev.

   - Clamp values set as part of gpio[d]_direction_output() so that
     anything != 0 will be send down to the driver as "1" not the value
     passed in.

   - ACPI can now support naming of GPIO lines, hogs and holes in the
     GPIO lists.

  New drivers:

   - The SX150x driver was deemed unfit for the GPIO subsystem and was
     moved over to a combined GPIO+pinctrl driver in the pinctrl
     subsystem.

  New features:

   - Various cleanups to various drivers"

* tag 'gpio-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (49 commits)
  gpio: merrifield: Implement gpio_get_direction callback
  gpio: merrifield: Add support for hardware debouncer
  gpio: chardev: Return error for seek operations
  gpio: arizona: Tidy up probe error path
  gpio: arizona: Remove pointless set of platform drvdata
  gpio: pl061: delete platform data handling
  gpio: pl061: move platform data into driver
  gpio: pl061: rename variable from chip to pl061
  gpio: pl061: rename state container struct
  gpio: pl061: use local state for parent IRQ storage
  gpio: set explicit nesting on drivers
  gpio: simplify adding threaded interrupts
  gpio: vf610: use builtin_platform_driver
  gpio: axp209: use correct register for GPIO input status
  gpio: stmpe: fix interrupt handling bug
  gpio: em: depnd on ARCH_SHMOBILE
  gpio: zx: depend on ARCH_ZX
  gpio: x86: update config dependencies for x86 specific hardware
  gpio: mb86s7x: use builtin_platform_driver
  gpio: etraxfs: use builtin_platform_driver
  ...

Pull documentation update from Jonathan Corbet:
 "These are the documentation changes for 4.10.

  It's another busy cycle for the docs tree, as the sphinx conversion
  continues. Highlights include:

   - Further work on PDF output, which remains a bit of a pain but
     should be more solid now.

   - Five more DocBook template files converted to Sphinx. Only 27 to
     go... Lots of plain-text files have also been converted and
     integrated.

   - Images in binary formats have been replaced with more
     source-friendly versions.

   - Various bits of organizational work, including the renaming of
     various files discussed at the kernel summit.

   - New documentation for the device_link mechanism.

  ... and, of course, lots of typo fixes and small updates"

* tag 'docs-4.10' of git://git.lwn.net/linux: (193 commits)
  dma-buf: Extract dma-buf.rst
  Update Documentation/00-INDEX
  docs: 00-INDEX: document directories/files with no docs
  docs: 00-INDEX: remove non-existing entries
  docs: 00-INDEX: add missing entries for documentation files/dirs
  docs: 00-INDEX: consolidate process/ and admin-guide/ description
  scripts: add a script to check if Documentation/00-INDEX is sane
  Docs: change sh -> awk in REPORTING-BUGS
  Documentation/core-api/device_link: Add initial documentation
  core-api: remove an unexpected unident
  ppc/idle: Add documentation for powersave=off
  Doc: Correct typo, "Introdution" => "Introduction"
  Documentation/atomic_ops.txt: convert to ReST markup
  Documentation/local_ops.txt: convert to ReST markup
  Documentation/assoc_array.txt: convert to ReST markup
  docs-rst: parse-headers.pl: cleanup the documentation
  docs-rst: fix media cleandocs target
  docs-rst: media/Makefile: reorganize the rules
  docs-rst: media: build SVG from graphviz files
  docs-rst: replace bayer.png by a SVG image
  ...

Merge updates from Andrew Morton:

 - various misc bits

 - most of MM (quite a lot of MM material is awaiting the merge of
   linux-next dependencies)

 - kasan

 - printk updates

 - procfs updates

 - MAINTAINERS

 - /lib updates

 - checkpatch updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (123 commits)
  init: reduce rootwait polling interval time to 5ms
  binfmt_elf: use vmalloc() for allocation of vma_filesz
  checkpatch: don't emit unified-diff error for rename-only patches
  checkpatch: don't check c99 types like uint8_t under tools
  checkpatch: avoid multiple line dereferences
  checkpatch: don't check .pl files, improve absolute path commit log test
  scripts/checkpatch.pl: fix spelling
  checkpatch: don't try to get maintained status when --no-tree is given
  lib/ida: document locking requirements a bit better
  lib/rbtree.c: fix typo in comment of ____rb_erase_color
  lib/Kconfig.debug: make CONFIG_STRICT_DEVMEM depend on CONFIG_DEVMEM
  MAINTAINERS: add drm and drm/i915 irc channels
  MAINTAINERS: add "C:" for URI for chat where developers hang out
  MAINTAINERS: add drm and drm/i915 bug filing info
  MAINTAINERS: add "B:" for URI where to file bugs
  get_maintainer: look for arbitrary letter prefixes in sections
  printk: add Kconfig option to set default console loglevel
  printk/sound: handle more message headers
  printk/btrfs: handle more message headers
  printk/kdb: handle more message headers
  ...

.c and .h source files should not be executable, change
the permissions to 0644.

[ This would normally go through Andrew Morton, but his ancient
  patch-based toolchain doesn't do permission changes ]
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

- Regression fix from atomic conversion (rotation on the original G80).
- Concurrency fix when clearing compression tags.
- Fixes DP link training issues on GP102/4/6.
- Fixes backlight handling in the presence of Apple GMUX.
- Improvements to GPU error recovery in a number of scenarios.
- GP106 support.

* 'linux-4.10' of git://github.com/skeggsb/linux:
  drm/nouveau/kms/nv50: fix atomic regression on original G80
  drm/nouveau/bl: Do not register interface if Apple GMUX detected
  drm/nouveau/bl: Assign different names to interfaces
  drm/nouveau/bios/dp: fix handling of LevelEntryTableIndex on DP table 4.2
  drm/nouveau/ltc: protect clearing of comptags with mutex
  drm/nouveau/gr/gf100-: handle GPC/TPC/MPC trap
  drm/nouveau/core: recognise GP106 chipset
  drm/nouveau/ttm: wait for bo fence to signal before unmapping vmas
  drm/nouveau/gr/gf100-: FECS intr handling is not relevant on proprietary ucode
  drm/nouveau/gr/gf100-: properly ack all FECS error interrupts
  drm/nouveau/fifo/gf100-: recover from host mmu faults

drm/tegra: Changes for v4.10-rc1

This has a couple of fixes for IOMMU support and some fixes for error
handling.

* tag 'drm/tegra/for-4.10-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/tegra: Set sgt pointer in BO pin
  drm/tegra: Support kernel mappings with IOMMU
  gpu: host1x: Add locking to syncpt
  gpu: host1x: Store device address to all bufs
  drm/tegra: gem: Remove some dead code
  drm/tegra: sor: No need to free devm_ allocated memory
  drm/tegra: Fix error handling
  drm/tegra: dpaux: Fix error handling

drm/panel: Changes for v4.10-rc1

This adds support for a couple more panels to the simple-panel driver.
There is also a fix for a long-standing bug, but it's not critical since
no code will currently trigger it.

* tag 'drm/panel/for-4.10-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/panel: simple: Add support for AUO G185HAN01
  drm/panel: simple: Add support for AUO G133HAN01
  drm/panel: simple: Add more properties to Innolux G121I1-L01
  drm/panel: simple: Add bits-per-component for Sharp LQ123P1JX31
  drm/panel: simple: Check against num_timings when setting preferred for timing
  drm/panel: Add support for Chunghwa CLAA070WP03XG panel
  drm/panel: simple: Add NVD9128 as a simple panel
  drm/panel: simple: Add support for AUO T215HVN01
  drm/panel: simple: Add support for Sharp LQ150X1LG11 panels
  dt-bindings: display: Add Sharp LQ150X1LG11 panel binding

Merge tag 'drm-misc-next-fixes-2016-12-10' of git://anongit.freedesktop.org/git/drm-misc into drm-next

single fix for backwards compat.

* tag 'drm-misc-next-fixes-2016-12-10' of git://anongit.freedesktop.org/git/drm-misc:
  drm: Add fake controlD* symlinks for backwards compat

Pull irq updates from Thomas Gleixner:
 "The irq department provides:

   - a major update to the auto affinity management code, which is used
     by multi-queue devices

   - move of the microblaze irq chip driver into the common driver code
     so it can be shared between microblaze, powerpc and MIPS

   - a series of updates to the ARM GICV3 interrupt controller

   - the usual pile of fixes and small improvements all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
  powerpc/virtex: Use generic xilinx irqchip driver
  irqchip/xilinx: Try to fall back if xlnx,kind-of-intr not provided
  irqchip/xilinx: Add support for parent intc
  irqchip/xilinx: Rename get_irq to xintc_get_irq
  irqchip/xilinx: Restructure and use jump label api
  irqchip/xilinx: Clean up print messages
  microblaze/irqchip: Move intc driver to irqchip
  ARM: virt: Select ARM_GIC_V3_ITS
  ARM: gic-v3-its: Add 32bit support to GICv3 ITS
  irqchip/gic-v3-its: Specialise readq and writeq accesses
  irqchip/gic-v3-its: Specialise flush_dcache operation
  irqchip/gic-v3-its: Narrow down Entry Size when used as a divider
  irqchip/gic-v3-its: Change unsigned types for AArch32 compatibility
  irqchip/gic-v3: Use nops macro for Cavium ThunderX erratum 23154
  irqchip/gic-v3: Convert arm64 GIC accessors to {read,write}_sysreg_s
  genirq/msi: Drop artificial PCI dependency
  irqchip/bcm7038-l1: Implement irq_cpu_offline() callback
  genirq/affinity: Use default affinity mask for reserved vectors
  genirq/affinity: Take reserved vectors into account when spreading irqs
  PCI: Remove the irq_affinity mask from struct pci_dev
  ...

Pull timer updates from Thomas Gleixner:
 "The time/timekeeping/timer folks deliver with this update:

   - Fix a reintroduced signed/unsigned issue and cleanup the whole
     signed/unsigned mess in the timekeeping core so this wont happen
     accidentaly again.

   - Add a new trace clock based on boot time

   - Prevent injection of random sleep times when PM tracing abuses the
     RTC for storage

   - Make posix timers configurable for real tiny systems

   - Add tracepoints for the alarm timer subsystem so timer based
     suspend wakeups can be instrumented

   - The usual pile of fixes and updates to core and drivers"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  timekeeping: Use mul_u64_u32_shr() instead of open coding it
  timekeeping: Get rid of pointless typecasts
  timekeeping: Make the conversion call chain consistently unsigned
  timekeeping_Force_unsigned_clocksource_to_nanoseconds_conversion
  alarmtimer: Add tracepoints for alarm timers
  trace: Update documentation for mono, mono_raw and boot clock
  trace: Add an option for boot clock as trace clock
  timekeeping: Add a fast and NMI safe boot clock
  timekeeping/clocksource_cyc2ns: Document intended range limitation
  timekeeping: Ignore the bogus sleep time if pm_trace is enabled
  selftests/timers: Fix spelling mistake "Asyncrhonous" -> "Asynchronous"
  clocksource/drivers/bcm2835_timer: Unmap region obtained by of_iomap
  clocksource/drivers/arm_arch_timer: Map frame with of_io_request_and_map()
  arm64: dts: rockchip: Arch counter doesn't tick in system suspend
  clocksource/drivers/arm_arch_timer: Don't assume clock runs in suspend
  posix-timers: Make them configurable
  posix_cpu_timers: Move the add_device_randomness() call to a proper place
  timer: Move sys_alarm from timer.c to itimer.c
  ptp_clock: Allow for it to be optional
  Kconfig: Regenerate *.c_shipped files after previous changes
  ...

Pull smp hotplug updates from Thomas Gleixner:
 "This is the final round of converting the notifier mess to the state
  machine. The removal of the notifiers and the related infrastructure
  will happen around rc1, as there are conversions outstanding in other
  trees.

  The whole exercise removed about 2000 lines of code in total and in
  course of the conversion several dozen bugs got fixed. The new
  mechanism allows to test almost every hotplug step standalone, so
  usage sites can exercise all transitions extensively.

  There is more room for improvement, like integrating all the
  pointlessly different architecture mechanisms of synchronizing,
  setting cpus online etc into the core code"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
  tracing/rb: Init the CPU mask on allocation
  soc/fsl/qbman: Convert to hotplug state machine
  soc/fsl/qbman: Convert to hotplug state machine
  zram: Convert to hotplug state machine
  KVM/PPC/Book3S HV: Convert to hotplug state machine
  arm64/cpuinfo: Convert to hotplug state machine
  arm64/cpuinfo: Make hotplug notifier symmetric
  mm/compaction: Convert to hotplug state machine
  iommu/vt-d: Convert to hotplug state machine
  mm/zswap: Convert pool to hotplug state machine
  mm/zswap: Convert dst-mem to hotplug state machine
  mm/zsmalloc: Convert to hotplug state machine
  mm/vmstat: Convert to hotplug state machine
  mm/vmstat: Avoid on each online CPU loops
  mm/vmstat: Drop get_online_cpus() from init_cpu_node_state/vmstat_cpu_dead()
  tracing/rb: Convert to hotplug state machine
  oprofile/nmi timer: Convert to hotplug state machine
  net/iucv: Use explicit clean up labels in iucv_init()
  x86/pci/amd-bus: Convert to hotplug state machine
  x86/oprofile/nmi: Convert to hotplug state machine
  ...

Since I leave Samsung, I would like to step down from maintenance duties.
Bartek Zolnierkiewicz will replace.
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

For several devices, the rootwait time is sensitive because it directly
affects booting time.  The polling interval of rootwait is currently
100ms.  To save unnessesary waiting time, reduce the polling interval to
5 ms.

[akpm@linux-foundation.org: remove used-once #define]
Link: http://lkml.kernel.org/r/20161207060743.1728-1-js07.lee@samsung.comSigned-off-by: Jungseung Lee <js07.lee@samsung.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We have observed page allocations failures of order 4 during core dump
while trying to allocate vma_filesz.  This results in a useless core
file of size 0.  To improve reliability use vmalloc().

Note that the vmalloc() allocation is bounded by sysctl_max_map_count,
which is 65,530 by default.  So with a 4k page size, and 8 bytes per
seg, this is a max of 128 pages or an order 7 allocation.  Other parts
of the core dump path, such as fill_files_note() are already using
vmalloc() for presumably similar reasons.

Link: http://lkml.kernel.org/r/1479745791-17611-1-git-send-email-jbaron@akamai.comSigned-off-by: Jason Baron <jbaron@akamai.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I generated a patch with `git format-patch` which checkpatch thinks is
invalid:

    $ ./scripts/checkpatch.pl lpc-dt/0006-mfd-dt-Move-syscon-bindings-to-syscon-subdirectory.patch
    WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
     Documentation/devicetree/bindings/mfd/{ => syscon}/aspeed-scu.txt         | 0

    ERROR: Does not appear to be a unified-diff format patch

    total: 1 errors, 1 warnings, 0 lines checked

    NOTE: For some of the reported defects, checkpatch may be able to
          mechanically convert to the typical style using --fix or --fix-inplace.

    lpc-dt/0006-mfd-dt-Move-syscon-bindings-to-syscon-subdirectory.patch has style problems, please review.

    NOTE: If any of the errors are false positives, please report
          them to the maintainer, see CHECKPATCH in MAINTAINERS.

The patch in question was all renames with no edits, giving 100%
similarity and thus no diff markers.

Set '$is_patch = 1;' in the add/remove/rename detection to avoid
generating spurious warnings.

Link: http://lkml.kernel.org/r/20161205232224.22685-1-andrew@aj.id.auSigned-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Tools contains user space code so uintX_t types are just fine.

Link: http://lkml.kernel.org/r/1479286379-853-1-git-send-email-tomas.winkler@intel.comSigned-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>