New phidget interface kits (type 8/8/8) reset their outputs if they
haven't received a set report for 2 seconds.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add yet another device ID to the ipaq USB-serial driver.
Signed-Off-By: Matthias Urlichs <matthias@urlichs.de>
Cc: Ganesh Varadarajan <ganesh@veritas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch adds support for three OpenPort ECU data cables from Tactrix
Inc. to the ftdi_sio driver's device ID table.  One of the PIDs was
supplied by Donour Sizemore on the ftdi-usb-sio-devel mailing list.  The
other two were added by myself after examining the Windows driver software.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Address http://bugzilla.kernel.org/show_bug.cgi?id=7126

Attempting to read the ethernet ID directly from the eeprom somehow
confuses ADM8515.  Subsequent read requests to either the eeprom or the MII
fail as well.  Didn't dig much deeper, though.  For example ADM8513 does
not experience this problem.

I used the fact that at power up the device is reading its ID automatically
(not true for older Pegasus based devices) and put it in the Ethernet ID
registers.  So now the driver uses get_registers() instead of
read_eprom_word() if the device is Pegasus_II based one.  Tested it with
all (Pegasus and Pegasus_II) gadgets i have and everything seems ok.

Cc: <jogeedaklown@yahoo.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as794) adds an unusual_devs entry for the Nokia E60.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

this adds a new id to the kaweth driver.
Please apply.
Signed-Off-By: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (130 commits)
  [ARM] 3856/1: Add clocksource for Intel IXP4xx platforms
  [ARM] 3855/1: Add generic time support
  [ARM] 3873/1: S3C24XX: Add irq_chip names
  [ARM] 3872/1: S3C24XX: Apply consistant tabbing to irq_chips
  [ARM] 3871/1: S3C24XX: Fix ordering of EINT4..23
  [ARM] nommu: confirms the CR_V bit in nommu mode
  [ARM] nommu: abort handler fixup for !CPU_CP15_MMU cores.
  [ARM] 3870/1: AT91: Start removing static memory mappings
  [ARM] 3869/1: AT91: NAND support for DK and KB9202 boards
  [ARM] 3868/1: AT91 hardware header update
  [ARM] 3867/1: AT91 GPIO update
  [ARM] 3866/1: AT91 clock update
  [ARM] 3865/1: AT91RM9200 header updates
  [ARM] 3862/2: S3C2410 - add basic power management support for AML M5900 series
  [ARM] kthread: switch arch/arm/kernel/apm.c
  [ARM] Off-by-one in arch/arm/common/icst*
  [ARM] 3864/1: Refactore sharpsl_pm
  [ARM] 3863/1: Add Locomo SPI Device
  [ARM] 3847/2:  Convert LOMOMO to use struct device for GPIOs
  [ARM] Use CPU_CACHE_* where possible in asm/cacheflush.h
  ...

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc:
  [MMC] Don't check READY_FOR_DATA when reading
  [MMC] MMC_CAP_BYTEBLOCK flag for non-log2 block sizes capable hosts
  [MMC] Add multi block-write capability
  [MMC] Remove data->blksz_bits member
  [MMC] Convert mmci to use data->blksz rather than data->blksz_bits

Enables the ixp4xx platforms to use Generic time-of-day.
Signed-off-by: Kevin Hilman <khilman@mvista.com>
Acked-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This patch adds Generic time-of-day support for the ARM architecture.

The support is currently added using #ifdef's so that it can support
sub-arches that do not (yet) have a clocksource added.  As sub-arches
add clocksource support, they should 'select GENERIC_TIME'
Signed-off-by: Deepak Saxena <dsaxena@mvista.com>
Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Kevin Hilman <khilman@mvista.com>
Acked-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Add names to all the irq_chip structes
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Apply consistant tabbing to the IRQ chip
structures in arch/arm/mach-s3c2410/irq.c
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The demux code for the IRQ EINTs above 3 was
using find last set instead of finding first
set.

Also fix it so that we only check EINT4..7
when the parent EINT4t7 goes off, and the
8..23 when EINT8t23 goes off.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

In nommu mode, the exception vector location depends on the platforms.
Some of the implementations may have some special exception control
forwarding method in their ROM/flash and for some of them has its own
re-mapping mechanism by the h/w.

This patch introduces a special configuration CONFIG_CPU_HIGH_VECTOR which
turns on the CR_V bit in nommu mode. The CR_V bit is turned off by default.
This feature depends on CP15 and does not supported by ARM740.
Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

There is no FSR/FAR register on no-CP15 or MPU cores. This patch adds a
dummy abort handler which returns zero for the base restored Data Abort
model !CPU_CP15_MMU cores. The abort-lv4t.S is still used with the fix-up
for the base updated Data Abort model cores.
Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This patch removes the static memory mapping for the currently-unused
peripherals [Synchronous Serial, Timer/Counter unit], and for those
drivers that already ioremap() their registers [UART].

Also, the Ethernet driver now uses the platform_device resources but
doesn't yet use ioremap() so we need to pass it the virtual address
instead of the physical address.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Major cleanup of all s390 inline assemblies. They now have a common
coding style. Quite a few have been shortened, mainly by using register
asm variables. Use of the EX_TABLE macro helps  as well. The atomic ops,
bit ops and locking inlines new use the Q-constraint if a newer gcc
is used.  That results in slightly better code.

Thanks to Christian Borntraeger for proof reading the changes.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Huge s390 assembly files whitespace cleanup.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

A user space program can read uninitialised kernel memory
by appending to a file from a bad address and then reading
the result back. The cause is the copy_from_user function
that does not clear the remaining bytes of the kernel
buffer after it got a fault on the user space address.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Call init_timer only once fpr tp->timer in tty3270.
Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add a kernel config option for the IBM System z9. This will produce
faster code on newer compilers using the -march=z9-109 option.
Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The clocksource infrastructure introduced with commit
ad596171 broke 31 bit s390.
The reason is that the do_div() primitive for 31 bit always
had a restriction: it could only divide an unsigned 64 bit
integer by an unsigned 31 bit integer. The clocksource code
now uses do_div() with a base value that has the most
significant bit set. The result is that clock->cycle_interval
has a funny value which causes the linux time to jump around
like mad.
The solution is "obvious": implement a proper __div64_32
function for 31 bit s390.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

sparse complains, if we use bitwise operations on enums. Cast enum to
long in order to fix that problem!
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Don't use static initialization for struct members containing
variables because gcc would generate more code and use double space
on stack.
Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Lock for mmap_sem is missing on page fault retry for init task
when it fails due to out of memory.
Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

This patch adds support for the NAND flash on the Atmel AT91RM9200-DK
and KwikByte KB920x boards.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This patch adds the hardware register definitions for the TWI (I2C)
controller found on the AT91RM9200 and AT91SAM9xx processors.
It also defines the AIC Fast-Forcing registers added to the AT91SAM9's.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This patch makes the AT91 gpio.c support processor-generic (AT91RM9200
and AT91SAM9xxx).  The GPIO controllers supported by a particular AT91
processor are defined in the processor-specific file and are registered
with gpio.c at startup.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This patch makes the AT91 clock.c support processor-generic (AT91RM9200
and AT91SAM9xxx).  The clocks supported by a particular AT91 processor
are defined in the processor-specific file and are registered with
clock.c at startup.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This is more preparation for adding support for the new Atmel AT91SAM9
processors.

Changes include:
- Replace AT91_BASE_* with AT91RM9200_BASE_*
- Replace AT91_ID_* with AT91RM9200_ID_*
- ROM, SRAM and UHP address definitions moved to at91rm9200.h.
- The raw AT91_P[ABCD]_* definitions are now depreciated in favour of
the GPIO API.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

this patch registers the wakeup irq, sets a gpio pin to indicate the
status of system for suspend/resume operations, and adds the machine to
the supported machines for use with the simtec-pm
Signed-off-by: David Anders <danders@amltd.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Switch arch/arm/kernel/apm.c from using kernel_thread - whose export
is deprecated - to kthread.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

hi,

a quick find -iname \*.[ch] | xargs grep "> ARRAY_SIZE(", revealed
these in the icst drivers.
If i == ARRAY_SIZE, we get past the idx2s array.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (48 commits)
  [PATCH] bonding: update version number
  [PATCH] git-netdev-all: pc300_tty build fix
  [PATCH] Make PC300 WAN driver compile again
  [PATCH] Modularize generic HDLC
  [PATCH] more s2io __iomem annotations
  [PATCH] restore __iomem annotations in e1000
  [PATCH] 64bit bugs in s2io
  [PATCH] bonding: Fix primary selection error at enslavement time
  [PATCH] bonding: Don't mangle LACPDUs
  [PATCH] bonding: Validate probe replies in ARP monitor
  [PATCH] bonding: Don't release slaves when master is admin down
  [PATCH] bonding: Add priv_flag to avoid event mishandling
  [PATCH] bonding: Handle large hard_header_len
  [PATCH] bonding: Remove unneeded NULL test
  [PATCH] bonding: Format fix in seq_printf call
  [PATCH] bonding: Convert delay value from s16 to int
  [PATCH] bonding: Allow bonding to enslave a 10 Gig adapter
  Delete unused drivers/net/gt64240eth.h
  [PATCH] skge: fiber support
  [PATCH] fix possible NULL ptr deref in forcedeth
  ...

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] Don't use old-EH ->eng_timeout() hook when not needed
  [libata] sata_mv: fix oops by filling in missing hook
  [libata] One more s/15/ATA_SECONDARY_IRQ/ substitution
  [libata] pata_serverworks: fill in ->irq_clear hook
  [PATCH] pata_serverworks: correct PCI ID in cable detection table
  [PATCH] libata-sff: use our IRQ defines
  [PATCH] libata-eh: Remove layering violation and duplication when handling absent ports
  [PATCH] libata: tighten rules for legacy dependancies
  [PATCH] libata: refuse to register IRQless ports

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (129 commits)
  [PATCH] USB Storage: fix Rio Karma eject support build error
  USB: Airprime driver improvements to allow full speed EvDO transfers
  USB: remove OTG build warning
  USB: EHCI update VIA workaround
  USB: force root hub resume after power loss
  USB: ohci_usb can oops on shutdown
  USB: Dealias -110 code (more complete)
  USB: Remove unneeded void * casts in core files
  USB: u132-hcd: host controller driver for ELAN U132 adapter
  USB: ftdi-elan: client driver for ELAN Uxxx adapters
  usb serial: support Alcor Micro Corp. USB 2.0 TO RS-232 through pl2303 driver
  USB: Moschip 7840 USB-Serial Driver
  USB: add PlayStation 2 Trance Vibrator driver
  USB: Add ADU support for Ontrak ADU devices
  aircable: fix printk format warnings
  Add AIRcable USB Bluetooth Dongle Driver
  cypress_m8: implement graceful failure handling
  cypress_m8: improve control endpoint error handling
  cypress_m8: use usb_fill_int_urb where appropriate
  cypress_m8: use appropriate URB polling interval
  ...

The new code does clobber the result early, so make sure to tell
gcc to not put it into the same register as a input argument
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andrew Morton <akpm@osdl.org>
Acked-by: Kyle McMartin <kyle@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>