- 12 Oct, 2011 40 commits
-
-
Christoph Hellwig authored
Let the transaction commit unlock the inode before it potentially causes a synchronous log force. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Alex Elder <aelder@sgi.com>
-
Christoph Hellwig authored
Only read the LSN we need to push to with the ilock held, and then release it before we do the log force to improve concurrency. Signed-off-by:
-
Christoph Hellwig authored
Only read the LSN we need to push to with the ilock held, and then release it before we do the log force to improve concurrency. This also removes the only direct caller of _xfs_trans_commit, thus allowing it to be merged into the plain xfs_trans_commit again. Signed-off-by:
-
Christoph Hellwig authored
XFS_TRANS_SWAPEXT is a transaction type, not a flag for xfs_trans_commit, so don't pass it in xfs_swap_extents. Signed-off-by:
-
Lukas Czerner authored
In xfs_ioc_trim it is possible that computing the last allocation group to discard might overflow for big start & len values, because the result might be bigger then xfs_agnumber_t which is 32 bit long. Fix this by not allowing the start and end block of the range to be beyond the end of the file system. Note that if the start is beyond the end of the file system we have to return -EINVAL, but in the "end" case we have to truncate it to the fs size. Also introduce "end" variable, rather than using start+len which which might be more confusing to get right as this bug shows. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Reviewed-by:
-
Christoph Hellwig authored
Convert all function prototypes to the short form used elsewhere, and remove duplicates of comments already placed at the function body. Signed-off-by:
-
Christoph Hellwig authored
Fix a case in xfs_bmap_add_extent_unwritten_real where we aren't passing the returned error on. Signed-off-by:
-
Christoph Hellwig authored
All the parameters passed to xfs_bmap_add_extent_hole_real() are in the xfs_bmalloca structure now. Just pass the bmalloca parameter to the function instead of 8 separate parameters. Signed-off-by:
-
Christoph Hellwig authored
All the parameters passed to xfs_bmap_add_extent_delay_real() are in the xfs_bmalloca structure now. Just pass the bmalloca parameter to the function instead of 8 separate parameters. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Dave Chinner authored
Signed-off-by:
-
Dave Chinner authored
Signed-off-by:
-
Dave Chinner authored
Signed-off-by:
-
Dave Chinner authored
Signed-off-by:
-
Dave Chinner authored
Rather than passing the firstblock and freelist structure around, embed it into the bmalloca structure and remove it from the function parameters. This also enables the minleft parameter to be set only once in xfs_bmapi_write(), and the freelist cursor directly queried in xfs_bmapi_allocate to clear it when the lowspace algorithm is activated. Signed-off-by:
-
Dave Chinner authored
Rather that putting extent records on the stack and then pointing to them in the bmalloca structure which is in the same stack frame, put the extent records directly in the bmalloca structure. This reduces the number of args that need to be passed around. Signed-off-by:
-
Dave Chinner authored
All the variables xfs_bmap_isaeof() is passed are contained within the xfs_bmalloca structure. Pass that instead. Signed-off-by:
-
Christoph Hellwig authored
There is no real need to the xfs_bmap_add_extent, as the callers know what kind of extents they need to it. Removing it means duplicating the extents to btree conversion logic in three places, but overall it's still much simpler code and quite a bit less code. Signed-off-by:
-
Christoph Hellwig authored
Add a common helper for finding the last extent in a file. Largely based on a patch from Dave Chinner. Signed-off-by:
-
Dave Chinner authored
Now that all the read-only users of xfs_bmapi have been converted to use xfs_bmapi_read(), we can remove all the read-only handling cases from xfs_bmapi(). Once this is done, rename xfs_bmapi to xfs_bmapi_write to reflect the fact it is for allocation only. This enables us to kill the XFS_BMAPI_WRITE flag as well. Also clean up xfs_bmapi_write to the style used in the newly added xfs_bmapi_read/delay functions. Signed-off-by:
-
Dave Chinner authored
To further improve the readability of xfs_bmapi(), factor the unwritten extent conversion out into a separate function. This removes large block of logic from the xfs_bmapi() code loop and makes it easier to see the operational logic flow for xfs_bmapi(). Signed-off-by:
-
Dave Chinner authored
To further improve the readability of xfs_bmapi(), factor the extent allocation out into a separate function. This removes a large block of logic from the xfs_bmapi() code loop and makes it easier to see the operational logic flow for xfs_bmapi(). Signed-off-by:
-
Christoph Hellwig authored
We can just call xfs_bmap_add_extent_hole_delay directly to add a delayed allocated regions to the extent tree, instead of going through all the complexities of xfs_bmap_add_extent that aren't needed for this simple case. Signed-off-by:
-
Christoph Hellwig authored
Delalloc reservations are much simpler than allocations, so give them a separate bmapi-level interface. Using the previously added xfs_bmapi_reserve_delalloc we get a function that is only minimally more complicated than xfs_bmapi_read, which is far from the complexity in xfs_bmapi. Also remove the XFS_BMAPI_DELAY code after switching over the only user to xfs_bmapi_delay. Signed-off-by:
-
Christoph Hellwig authored
Move the reservation of delayed allocations, and addition of delalloc regions to the extent trees into a new helper function. For now this adds some twisted goto logic to xfs_bmapi, but that will be cleaned up in the following patches. Signed-off-by:
-
Dave Chinner authored
Now we have xfs_bmapi_read, there is no need for xfs_bmapi_single(). Change the remaining caller over and kill the function. Signed-off-by:
-
Dave Chinner authored
xfs_bmapi() currently handles both extent map reading and allocation. As a result, the code is littered with "if (wr)" branches to conditionally do allocation operations if required. This makes the code much harder to follow and causes significant indent issues with the code. Given that read mapping is much simpler than allocation, we can split out read mapping from xfs_bmapi() and reuse the logic that we have already factored out do do all the hard work of handling the extent map manipulations. The results in a much simpler function for the common extent read operations, and will allow the allocation code to be simplified in another commit. Once xfs_bmapi_read() is implemented, convert all the callers of xfs_bmapi() that are only reading extents to use the new function. Signed-off-by:
-
Dave Chinner authored
To further improve the readability of xfs_bmapi(), factor the pure extent map manipulations out into separate functions. This removes large blocks of logic from the xfs_bmapi() code loop and makes it easier to see the operational logic flow for xfs_bmapi(). Signed-off-by:
-
Christoph Hellwig authored
Instead of using a local variable that needs to updated when we modify the extent map just check ifp->if_bytes directly where we use it. Signed-off-by:
-
Christoph Hellwig authored
We already have the worst case blocks reserved, so xfs_icsb_modify_counters won't fail in xfs_bmap_add_extent_delay_real. In fact we've had an assert to catch this case since day and it never triggered. So remove the code to try smaller reservations, and just return the error for that case in addition to keeping the assert. Signed-off-by:
-
Christoph Hellwig authored
Both xfs_bmap_add_extent_hole_delay and xfs_bmap_add_extent_hole_real already contain code to handle the case where there is no extent to merge with, which is effectively the same as the code duplicated here. Signed-off-by:
-
Mitsuo Hayasaka authored
An attribute of inode can be fetched via xfs_vn_getattr() in XFS. Currently it returns EIO, not negative value, when it failed. As a result, the system call returns not negative value even though an error occured. The stat(2), ls and mv commands cannot handle this error and do not work correctly. This patch fixes this bug, and returns -EIO, not EIO when an error is detected in xfs_vn_getattr(). Signed-off-by:
Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Reviewed-by:
-
Chandra Seetharaman authored
Fix the incorrect comment in the header of the function _xfs_buf_find(). Signed-off-by:
Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by:
-
Chandra Seetharaman authored
Check the return value of xfs_trans_get_buf() and fail appropriately. Signed-off-by:
-
Chandra Seetharaman authored
Check the return value of xfs_buf_get() and fail appropriately. Signed-off-by:
-
Christoph Hellwig authored
Return unwritten extent conversion errors to aio_complete. Skip both unwritten extent conversion and size updates if we had an I/O error or the filesystem has been shut down. Return -EIO to the aio/buffer completion handlers in case of a forced shutdown. Signed-off-by:
-
Christoph Hellwig authored
Currently a buffered reader or writer can add pages to the pagecache while we are waiting for the iolock in xfs_file_dio_aio_write. Prevent this by re-checking mapping->nrpages after we got the iolock, and if nessecary upgrade the lock to exclusive mode. To simplify this a bit only take the ilock inside of xfs_file_aio_write_checks. Signed-off-by:
-
Christoph Hellwig authored
Currently xfs_attr_inactive causes a synchronous transactions if we are removing a file that has any extents allocated to the attribute fork, and thus makes XFS extremely slow at removing files with out of line extended attributes. The code looks a like a relict from the days before the busy extent list, but with the busy extent list we avoid reusing data and attr extents that have been freed but not commited yet, so this code is just as superflous as the synchronous transactions for data blocks. Signed-off-by:
Bernd Schubert <bernd.schubert@itwm.fraunhofer.de> Reviewed-by:
-
Christoph Hellwig authored
We now have an i_dio_count filed and surrounding infrastructure to wait for direct I/O completion instead of i_icount, and we have never needed to iocount waits for buffered I/O given that we only set the page uptodate after finishing all required work. Thus remove i_iocount, and replace the actually needed waits with calls to inode_dio_wait. Signed-off-by:
-
Christoph Hellwig authored
The current code relies on the xfs_ioend_wait call later on to make sure all I/O actually has completed. The xfs_ioend_wait call will go away soon, so prepare for that by using the waiting filemap function. Signed-off-by:
-
