- 30 Oct, 2017 13 commits
-
-
Vadim Pasternak authored
Add device record for Maxim MAX6621 temperature sensor device. Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Guenter Roeck <linux@roeck-us.net>
-
Vadim Pasternak authored
MAX6621 is a PECI-to-I2C translator provides an efficient, low-cost solution for PECI-to-SMBus/I2C protocol conversion. It allows reading the temperature from the PECI-compliant host directly from up to four PECI-enabled CPUs. Signed-off-by:
-
Colin Ian King authored
Don't populate const array watchdog_minors on the stack, instead make it static. Makes the object code smaller by over 350 bytes: Before: text data bss dec hex filename 48019 38144 256 86419 15193 drivers/hwmon/w83793.o After: text data bss dec hex filename 47574 38232 256 86062 1502e drivers/hwmon/w83793.o (gcc 6.3.0, x86-64) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Patrick Venture authored
The previous value reduced the time required to determine the fan value, however, it's also used as the final timeout mechanism. The prevous value would work for any fan speed greater than around 3k RPM. This increased value, lets the fan speeds return quickly but will wait longer to handle speeds below 3k RPM. Testing: this value was determined through experimentation on the ast2400 on the Quanta-q71l. This configurations runs 8 fans attached to the controller. Signed-off-by:
Patrick Venture <venture@google.com> Reviewed-by:
-
Alan Tull authored
Add new device tree binding for max1619. Signed-off-by:
Alan Tull <atull@kernel.org> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Alan Tull authored
Add new device tree bindings document for max1619 device including a new compatible string. Signed-off-by:
-
Colin Ian King authored
A previous commit removed bit or'ing into to the integer status so now status is now always zero. This means that the non-zero check on status and the sht15_send_status call will never occur; it is deadcode. Clean this up by removing the dead code. Detected by: CoverityScan CID#1456835 ("Logically dead code") Fixes: aa7ab80c578c ("hwmon: (sht15) Root out platform data") Signed-off-by: -
Linus Walleij authored
After finding out there are active users of this sensor I noticed: - It has a single PXA27x board file using the platform data - The platform data is only used to carry two GPIO pins, all other fields are unused - The driver does not use GPIO descriptors but the legacy GPIO API I saw we can swiftly fix this by: - Killing off the platform data entirely - Define a GPIO descriptor lookup table in the board file - Use the standard devm_gpiod_get() to grab the GPIO descriptors from either the device tree or the board file table. This compiles, but needs testing. Cc: arm@kernel.org Cc: Marco Franchi <marco.franchi@nxp.com> Cc: Davide Hug <d@videhug.ch> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Tested-by:
Marco Franchi <marco.franchi@nxp.com> Acked-by:
-
Guenter Roeck authored
Add support for handling temperature offset values for various AMD CPUs, similar to the code used in the coretemp driver for Intel CPUs. This is primarily for Ryzen CPUs (which has documented temperature offsets), but the code is kept generic to simplify adding additional CPUs. Signed-off-by: -
Guenter Roeck authored
Add support for temperature sensors on Family 17h (Ryzen) processors. Signed-off-by: -
Guenter Roeck authored
Introduce a local data structure and determine the temperature read function at probe time to reduce runtime complexity. Signed-off-by: -
Jean Delvare authored
Function snprintf already cares for the terminating NUL at the end of the string, the caller doesn't need to do it. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Andrea Merello <andrea.merello@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Edward A. James authored
The pmbus core may call read/write word data functions with a page value of -1, intending to perform the operation without setting the page. However, the read/write word data functions accept only unsigned 8-bit page numbers, and therefore cannot check for negative page number to avoid setting the page. This results in setting the page number to 0xFF. This may result in errors or undefined behavior of some devices (specifically the ir35221, which allows the page to be set to 0xFF, but some subsequent operations to read registers may fail). Switch the pmbus_set_page page parameter to an integer and perform the check for negative page there. Make read/write functions consistent in accepting an integer page number parameter. Signed-off-by:
Edward A. James <eajames@us.ibm.com> Fixes: cbcdec62 ("hwmon: (pmbus): Access word data for STATUS_WORD") Signed-off-by:
-
- 29 Oct, 2017 27 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix route leak in xfrm_bundle_create(). 2) In mac80211, validate user rate mask before configuring it. From Johannes Berg. 3) Properly enforce memory limits in fair queueing code, from Toke Hoiland-Jorgensen. 4) Fix lockdep splat in inet_csk_route_req(), from Eric Dumazet. 5) Fix TSO header allocation and management in mvpp2 driver, from Yan Markman. 6) Don't take socket lock in BH handler in strparser code, from Tom Herbert. 7) Don't show sockets from other namespaces in AF_UNIX code, from Andrei Vagin. 8) Fix double free in error path of tap_open(), from Girish Moodalbail. 9) Fix TX map failure path in igb and ixgbe, from Jean-Philippe Brucker and Alexander Duyck. 10) Fix DCB mode programming in stmmac driver, from Jose Abreu. 11) Fix err_count handling in various tunnels (ipip, ip6_gre). From Xin Long. 12) Properly align SKB head before building SKB in tuntap, from Jason Wang. 13) Avoid matching qdiscs with a zero handle during lookups, from Cong Wang. 14) Fix various endianness bugs in sctp, from Xin Long. 15) Fix tc filter callback races and add selftests which trigger the problem, from Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits) selftests: Introduce a new test case to tc testsuite selftests: Introduce a new script to generate tc batch file net_sched: fix call_rcu() race on act_sample module removal net_sched: add rtnl assertion to tcf_exts_destroy() net_sched: use tcf_queue_work() in tcindex filter net_sched: use tcf_queue_work() in rsvp filter net_sched: use tcf_queue_work() in route filter net_sched: use tcf_queue_work() in u32 filter net_sched: use tcf_queue_work() in matchall filter net_sched: use tcf_queue_work() in fw filter net_sched: use tcf_queue_work() in flower filter net_sched: use tcf_queue_work() in flow filter net_sched: use tcf_queue_work() in cgroup filter net_sched: use tcf_queue_work() in bpf filter net_sched: use tcf_queue_work() in basic filter net_sched: introduce a workqueue for RCU callbacks of tc filter sctp: fix some type cast warnings introduced since very beginning sctp: fix a type cast warnings that causes a_rwnd gets the wrong value sctp: fix some type cast warnings introduced by transport rhashtable sctp: fix some type cast warnings introduced by stream reconf ... -
David S. Miller authored
Cong Wang says: ==================== net_sched: fix races with RCU callbacks Recently, the RCU callbacks used in TC filters and TC actions keep drawing my attention, they introduce at least 4 race condition bugs: 1. A simple one fixed by Daniel: commit c78e1746 Author: Daniel Borkmann <daniel@iogearbox.net> Date: Wed May 20 17:13:33 2015 +0200 net: sched: fix call_rcu() race on classifier module unloads 2. A very nasty one fixed by me: commit 1697c4bb Author: Cong Wang <xiyou.wangcong@gmail.com> Date: Mon Sep 11 16:33:32 2017 -0700 net_sched: carefully handle tcf_block_put() 3. Two more bugs found by Chris: https://patchwork.ozlabs.org/patch/826696/ https://patchwork.ozlabs.org/patch/826695/ Usually RCU callbacks are simple, however for TC filters and actions, they are complex because at least TC actions could be destroyed together with the TC filter in one callback. And RCU callbacks are invoked in BH context, without locking they are parallel too. All of these contribute to the cause of these nasty bugs. Alternatively, we could also: a) Introduce a spinlock to serialize these RCU callbacks. But as I said in commit 1697c4bb ("net_sched: carefully handle tcf_block_put()"), it is very hard to do because of tcf_chain_dump(). Potentially we need to do a lot of work to make it possible (if not impossible). b) Just get rid of these RCU callbacks, because they are not necessary at all, callers of these call_rcu() are all on slow paths and holding RTNL lock, so blocking is allowed in their contexts. However, David and Eric dislike adding synchronize_rcu() here. As suggested by Paul, we could defer the work to a workqueue and gain the permission of holding RTNL again without any performance impact, however, in tcf_block_put() we could have a deadlock when flushing workqueue while hodling RTNL lock, the trick here is to defer the work itself in workqueue and make it queued after all other works so that we keep the same ordering to avoid any use-after-free. Please see the first patch for details. Patch 1 introduces the infrastructure, patch 2~12 move each tc filter to the new tc filter workqueue, patch 13 adds an assertion to catch potential bugs like this, patch 14 closes another rcu callback race, patch 15 and patch 16 add new test cases. ==================== Reported-by:
Chris Mi <chrism@mellanox.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Pirko <jiri@resnulli.us> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chris Mi authored
In this patchset, we fixed a tc bug. This patch adds the test case that reproduces the bug. To run this test case, user should specify an existing NIC device: # sudo ./tdc.py -d enp4s0f0 This test case belongs to category "flower". If user doesn't specify a NIC device, the test cases belong to "flower" will not be run. In this test case, we create 1M filters and all filters share the same action. When destroying all filters, kernel should not panic. It takes about 18s to run it. Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
Lucas Bates <lucasb@mojatatu.com> Signed-off-by:
-
Chris Mi authored
# ./tdc_batch.py -h usage: tdc_batch.py [-h] [-n NUMBER] [-o] [-s] [-p] device file TC batch file generator positional arguments: device device name file batch file name optional arguments: -h, --help show this help message and exit -n NUMBER, --number NUMBER how many lines in batch file -o, --skip_sw skip_sw (offload), by default skip_hw -s, --share_action all filters share the same action -p, --prio all filters have different prio Acked-by: -
Cong Wang authored
Similar to commit c78e1746 ("net: sched: fix call_rcu() race on classifier module unloads"), we need to wait for flying RCU callback tcf_sample_cleanup_rcu(). Cc: Yotam Gigi <yotamg@mellanox.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Pirko <jiri@resnulli.us> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Cong Wang authored
After previous patches, it is now safe to claim that tcf_exts_destroy() is always called with RTNL lock. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Pirko <jiri@resnulli.us> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
This patch introduces a dedicated workqueue for tc filters so that each tc filter's RCU callback could defer their action destroy work to this workqueue. The helper tcf_queue_work() is introduced for them to use. Because we hold RTNL lock when calling tcf_block_put(), we can not simply flush works inside it, therefore we have to defer it again to this workqueue and make sure all flying RCU callbacks have already queued their work before this one, in other words, to ensure this is the last one to execute to prevent any use-after-free. On the other hand, this makes tcf_block_put() ugly and harder to understand. Since David and Eric strongly dislike adding synchronize_rcu(), this is probably the only solution that could make everyone happy. Please also see the code comments below. Reported-by:
-
David S. Miller authored
Xin Long says: ==================== sctp: a bunch of fixes for some sparse warnings As Eric noticed, when running 'make C=2 M=net/sctp/', a plenty of warnings or errors checked by sparse appear. They are all problems about Endian and type cast. Most of them are just warnings by which no issues could be caused while some might be bugs. This patchset fixes them with four patches basically according to how they are introduced. ==================== Signed-off-by: -
Xin Long authored
These warnings were found by running 'make C=2 M=net/sctp/'. They are there since very beginning. Note after this patch, there still one warning left in sctp_outq_flush(): sctp_chunk_fail(chunk, SCTP_ERROR_INV_STRM) Since it has been moved to sctp_stream_outq_migrate on net-next, to avoid the extra job when merging net-next to net, I will post the fix for it after the merging is done. Reported-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
These warnings were found by running 'make C=2 M=net/sctp/'. Commit d4d6fb57 ("sctp: Try not to change a_rwnd when faking a SACK from SHUTDOWN.") expected to use the peers old rwnd and add our flight size to the a_rwnd. But with the wrong Endian, it may not work as well as expected. So fix it by converting to the right value. Fixes: d4d6fb57 ("sctp: Try not to change a_rwnd when faking a SACK from SHUTDOWN.") Reported-by:
-
Xin Long authored
These warnings were found by running 'make C=2 M=net/sctp/'. They are introduced by not aware of Endian for the port when coding transport rhashtable patches. Fixes: 7fda702f ("sctp: use new rhlist interface on sctp transport rhashtable") Reported-by:
-
Xin Long authored
These warnings were found by running 'make C=2 M=net/sctp/'. They are introduced by not aware of Endian when coding stream reconf patches. Since commit c0d8bab6 ("sctp: add get and set sockopt for reconf_enable") enabled stream reconf feature for users, the Fixes tag below would use it. Fixes: c0d8bab6 ("sctp: add get and set sockopt for reconf_enable") Reported-by:
-
Cong Wang authored
Davide found the following script triggers a NULL pointer dereference: ip l a name eth0 type dummy tc q a dev eth0 parent :1 handle 1: htb This is because for a freshly created netdevice noop_qdisc is attached and when passing 'parent :1', kernel actually tries to match the major handle which is 0 and noop_qdisc has handle 0 so is matched by mistake. Commit 69012ae4 tries to fix a similar bug but still misses this case. Handle 0 is not a valid one, should be just skipped. In fact, kernel uses it as TC_H_UNSPEC. Fixes: 69012ae4 ("net: sched: fix handling of singleton qdiscs with qdisc_hash") Fixes: 59cc1f61 ("net: sched:convert qdisc linked list to hashtable") Reported-by:
Davide Caratti <dcaratti@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Eric Dumazet <edumazet@google.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Xin Long authored
Now when migrating sock to another one in sctp_sock_migrate(), it only resets owner sk for the data in receive queues, not the chunks on out queues. It would cause that data chunks length on the sock is not consistent with sk sk_wmem_alloc. When closing the sock or freeing these chunks, the old sk would never be freed, and the new sock may crash due to the overflow sk_wmem_alloc. syzbot found this issue with this series: r0 = socket$inet_sctp() sendto$inet(r0) listen(r0) accept4(r0) close(r0) Although listen() should have returned error when one TCP-style socket is in connecting (I may fix this one in another patch), it could also be reproduced by peeling off an assoc. This issue is there since very beginning. This patch is to reset owner sk for the chunks on out queues so that sk sk_wmem_alloc has correct value after accept one sock or peeloff an assoc to one sock. Note that when resetting owner sk for chunks on outqueue, it has to sctp_clear_owner_w/skb_orphan chunks before changing assoc->base.sk first and then sctp_set_owner_w them after changing assoc->base.sk, due to that sctp_wfree and it's callees are using assoc->base.sk. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
David S. Miller authored
John Fastabend says: ==================== net: sockmap fixes Last two fixes (as far as I know) for sockmap code this round. First, we are using the qdisc cb structure when making the data end calculation. This is really just wrong so, store it with the other metadata in the correct tcp_skb_cb sturct to avoid breaking things. Next, with recent work to attach multiple programs to a cgroup a specific enumeration of return codes was agreed upon. However, I wrote the sk_skb program types before seeing this work and used a different convention. Patch 2 in the series aligns the return codes to avoid breaking with this infrastructure and also aligns with other programming conventions to avoid being the odd duck out forcing programs to remember SK_SKB programs are different. Pusing to net because its a user visible change. With this SK_SKB program return codes are the same as other cgroup program types. ==================== Signed-off-by:
-
