- 09 Aug, 2016 14 commits
-
-
Grygorii Strashko authored
Kmemleak reports following false positive memory leaks for each sk buffers allocated by CPSW (__netdev_alloc_skb_ip_align()) in cpsw_ndo_open() and cpsw_rx_handler(): unreferenced object 0xea915000 (size 2048): comm "systemd-network", pid 713, jiffies 4294938323 (age 102.180s) hex dump (first 32 bytes): 00 58 91 ea ff ff ff ff ff ff ff ff ff ff ff ff .X.............. ff ff ff ff ff ff fd 0f 00 00 00 00 00 00 00 00 ................ backtrace: [<c0108680>] __kmalloc_track_caller+0x1a4/0x230 [<c0529eb4>] __alloc_skb+0x68/0x16c [<c052c884>] __netdev_alloc_skb+0x40/0x104 [<bf1ad29c>] cpsw_ndo_open+0x374/0x670 [ti_cpsw] [<c053c3d4>] __dev_open+0xb0/0x114 [<c053c690>] __dev_change_flags+0x9c/0x14c [<c053c760>] dev_change_flags+0x20/0x50 [<c054bdcc>] do_setlink+0x2cc/0x78c [<c054c358>] rtnl_setlink+0xcc/0x100 [<c054b34c>] rtnetlink_rcv_msg+0x184/0x224 [<c056467c>] netlink_rcv_skb+0xa8/0xc4 [<c054b1c0>] rtnetlink_rcv+0x2c/0x34 [<c0564018>] netlink_unicast+0x16c/0x1f8 [<c0564498>] netlink_sendmsg+0x334/0x348 [<c052015c>] sock_sendmsg+0x1c/0x2c [<c05213e0>] SyS_sendto+0xc0/0xe8 unreferenced object 0xec861780 (size 192): comm "softirq", pid 0, jiffies 4294938759 (age 109.540s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 b0 5a ed 00 00 00 00 00 00 00 00 ......Z......... backtrace: [<c0107830>] kmem_cache_alloc+0x190/0x208 [<c052c768>] __build_skb+0x30/0x98 [<c052c8fc>] __netdev_alloc_skb+0xb8/0x104 [<bf1abc54>] cpsw_rx_handler+0x68/0x1e4 [ti_cpsw] [<bf11aa30>] __cpdma_chan_free+0xa8/0xc4 [davinci_cpdma] [<bf11ab98>] __cpdma_chan_process+0x14c/0x16c [davinci_cpdma] [<bf11abfc>] cpdma_chan_process+0x44/0x5c [davinci_cpdma] [<bf1adc78>] cpsw_rx_poll+0x1c/0x9c [ti_cpsw] [<c0539180>] net_rx_action+0x1f0/0x2ec [<c003881c>] __do_softirq+0x134/0x258 [<c0038a00>] do_softirq+0x68/0x70 [<c0038adc>] __local_bh_enable_ip+0xd4/0xe8 [<c0640994>] _raw_spin_unlock_bh+0x30/0x34 [<c05f4e9c>] igmp6_group_added+0x4c/0x1bc [<c05f6600>] ipv6_dev_mc_inc+0x398/0x434 [<c05dba74>] addrconf_dad_work+0x224/0x39c This happens because CPSW allocates SK buffers and then passes pointers on them in CPDMA where they stored in internal CPPI RAM (SRAM) which belongs to DEV MMIO space. Kmemleak does not scan IO memory and so reports memory leaks. Hence, mark allocated sk buffers as false positive explicitly. Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:Grygorii Strashko <grygorii.strashko@ti.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lance Richardson authored
When executing the script included below, the netns delete operation hangs with the following message (repeated at 10 second intervals): kernel:unregister_netdevice: waiting for lo to become free. Usage count = 1 This occurs because a reference to the lo interface in the "secure" netns is still held by a dst entry in the xfrm bundle cache in the init netns. Address this problem by garbage collecting the tunnel netns flow cache when a cross-namespace vti interface receives a NETDEV_DOWN notification. A more detailed description of the problem scenario (referencing commands in the script below): (1) ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 The vti_test interface is created in the init namespace. vti_tunnel_init() attaches a struct ip_tunnel to the vti interface's netdev_priv(dev), setting the tunnel net to &init_net. (2) ip link set vti_test netns secure The vti_test interface is moved to the "secure" netns. Note that the associated struct ip_tunnel still has tunnel->net set to &init_net. (3) ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 The first packet sent using the vti device causes xfrm_lookup() to be called as follows: dst = xfrm_lookup(tunnel->net, skb_dst(skb), fl, NULL, 0); Note that tunnel->net is the init namespace, while skb_dst(skb) references the vti_test interface in the "secure" namespace. The returned dst references an interface in the init namespace. Also note that the first parameter to xfrm_lookup() determines which flow cache is used to store the computed xfrm bundle, so after xfrm_lookup() returns there will be a cached bundle in the init namespace flow cache with a dst referencing a device in the "secure" namespace. (4) ip netns del secure Kernel begins to delete the "secure" namespace. At some point the vti_test interface is deleted, at which point dst_ifdown() changes the dst->dev in the cached xfrm bundle flow from vti_test to lo (still in the "secure" namespace however). Since nothing has happened to cause the init namespace's flow cache to be garbage collected, this dst remains attached to the flow cache, so the kernel loops waiting for the last reference to lo to go away. <Begin script> ip link add br1 type bridge ip link set dev br1 up ip addr add dev br1 1.1.1.1/8 ip netns add secure ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 ip link set vti_test netns secure ip netns exec secure ip link set vti_test up ip netns exec secure ip link s lo up ip netns exec secure ip addr add dev lo 192.168.100.1/24 ip netns exec secure ip route add 192.168.200.0/24 dev vti_test ip xfrm policy flush ip xfrm state flush ip xfrm policy add dir out tmpl src 1.1.1.1 dst 1.1.1.2 \ proto esp mode tunnel mark 1 ip xfrm policy add dir in tmpl src 1.1.1.2 dst 1.1.1.1 \ proto esp mode tunnel mark 1 ip xfrm state add src 1.1.1.1 dst 1.1.1.2 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip xfrm state add src 1.1.1.2 dst 1.1.1.1 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 ip netns del secure <End script> Reported-by:Hangbin Liu <haliu@redhat.com> Reported-by:
Jan Tluka <jtluka@redhat.com> Signed-off-by:
Lance Richardson <lrichard@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsDavid S. Miller authored
David Howells says: ==================== rxrpc: Miscellaneous fixes Here are a bunch of miscellaneous fixes to AF_RXRPC: (*) Fix an uninitialised pointer. (*) Fix error handling when we fail to connect a call. (*) Fix a NULL pointer dereference. (*) Fix two occasions where a packet is accessed again after being queued for someone else to deal with. (*) Fix a missing skb free. ==================== Signed-off-by: -
David Howells authored
Under certain conditions, the data_ready handler will discard a packet. These need to be freed. Signed-off-by:David Howells <dhowells@redhat.com>
-
David Howells authored
Fix a use of a packet after it has been enqueued onto the packet processing queue in the data_ready handler. Once on a call's Rx queue, we mustn't touch it any more as it may be dequeued and freed by the call processor running on a work queue. Save the values we need before enqueuing. Without this, we can get an oops like the following: BUG: unable to handle kernel NULL pointer dereference at 000000000000009c IP: [<ffffffffa01854e8>] rxrpc_fast_process_packet+0x724/0xa11 [af_rxrpc] PGD 0 Oops: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G E 4.7.0-fsdevel+ #1336 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 task: ffff88040d6863c0 task.stack: ffff88040d68c000 RIP: 0010:[<ffffffffa01854e8>] [<ffffffffa01854e8>] rxrpc_fast_process_packet+0x724/0xa11 [af_rxrpc] RSP: 0018:ffff88041fb03a78 EFLAGS: 00010246 RAX: ffffffffffffffff RBX: ffff8803ff195b00 RCX: 0000000000000001 RDX: ffffffffa01854d1 RSI: 0000000000000008 RDI: ffff8803ff195b00 RBP: ffff88041fb03ab0 R08: 0000000000000000 R09: 0000000000000001 R10: ffff88041fb038c8 R11: 0000000000000000 R12: ffff880406874800 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88041fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000009c CR3: 0000000001c14000 CR4: 00000000001406e0 Stack: ffff8803ff195ea0 ffff880408348800 ffff880406874800 ffff8803ff195b00 ffff880408348800 ffff8803ff195ed8 0000000000000000 ffff88041fb03af0 ffffffffa0186072 0000000000000000 ffff8804054da000 0000000000000000 Call Trace: <IRQ> [<ffffffffa0186072>] rxrpc_data_ready+0x89d/0xbae [af_rxrpc] [<ffffffff814c94d7>] __sock_queue_rcv_skb+0x24c/0x2b2 [<ffffffff8155c59a>] __udp_queue_rcv_skb+0x4b/0x1bd [<ffffffff8155e048>] udp_queue_rcv_skb+0x281/0x4db [<ffffffff8155ea8f>] __udp4_lib_rcv+0x7ed/0x963 [<ffffffff8155ef9a>] udp_rcv+0x15/0x17 [<ffffffff81531d86>] ip_local_deliver_finish+0x1c3/0x318 [<ffffffff81532544>] ip_local_deliver+0xbb/0xc4 [<ffffffff81531bc3>] ? inet_del_offload+0x40/0x40 [<ffffffff815322a9>] ip_rcv_finish+0x3ce/0x42c [<ffffffff81532851>] ip_rcv+0x304/0x33d [<ffffffff81531edb>] ? ip_local_deliver_finish+0x318/0x318 [<ffffffff814dff9d>] __netif_receive_skb_core+0x601/0x6e8 [<ffffffff814e072e>] __netif_receive_skb+0x13/0x54 [<ffffffff814e082a>] netif_receive_skb_internal+0xbb/0x17c [<ffffffff814e1838>] napi_gro_receive+0xf9/0x1bd [<ffffffff8144eb9f>] rtl8169_poll+0x32b/0x4a8 [<ffffffff814e1c7b>] net_rx_action+0xe8/0x357 [<ffffffff81051074>] __do_softirq+0x1aa/0x414 [<ffffffff810514ab>] irq_exit+0x3d/0xb0 [<ffffffff810184a2>] do_IRQ+0xe4/0xfc [<ffffffff81612053>] common_interrupt+0x93/0x93 <EOI> [<ffffffff814af837>] ? cpuidle_enter_state+0x1ad/0x2be [<ffffffff814af832>] ? cpuidle_enter_state+0x1a8/0x2be [<ffffffff814af96a>] cpuidle_enter+0x12/0x14 [<ffffffff8108956f>] call_cpuidle+0x39/0x3b [<ffffffff81089855>] cpu_startup_entry+0x230/0x35d [<ffffffff810312ea>] start_secondary+0xf4/0xf7 Signed-off-by: -
David Howells authored
Once a packet has been posted to a connection in the data_ready handler, we mustn't try reposting if we then find that the connection is dying as the refcount has been given over to the dying connection and the packet might no longer exist. Losing the packet isn't a problem as the peer will retransmit. Signed-off-by: -
David Howells authored
The call state machine processor sets up the message parameters for a UDP message that it might need to transmit in advance on the basis that there's a very good chance it's going to have to transmit either an ACK or an ABORT. This requires it to look in the connection struct to retrieve some of the parameters. However, if the call is complete, the call connection pointer may be NULL to dissuade the processor from transmitting a message. However, there are some situations where the processor is still going to be called - and it's still going to set up message parameters whether it needs them or not. This results in a NULL pointer dereference at: net/rxrpc/call_event.c:837 To fix this, skip the message pre-initialisation if there's no connection attached. Signed-off-by: -
David Howells authored
If rxrpc_new_client_call() fails to make a connection, the call record that it allocated needs to be marked as RXRPC_CALL_RELEASED before it is passed to rxrpc_put_call() to indicate that it no longer has any attachment to the AF_RXRPC socket. Without this, an assertion failure may occur at: net/rxrpc/call_object:635 Signed-off-by: -
Arnd Bergmann authored
A newly added bugfix caused an uninitialized variable to be used for printing debug output. This is harmless as long as the debug setting is disabled, but otherwise leads to an immediate crash. gcc warns about this when -Wmaybe-uninitialized is enabled: net/rxrpc/call_object.c: In function 'rxrpc_release_call': net/rxrpc/call_object.c:496:163: error: 'sp' may be used uninitialized in this function [-Werror=maybe-uninitialized] The initialization was removed but one of the users remains. This adds back the initialization. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 372ee163 ("rxrpc: Fix races between skb free, ACK generation and replying") Signed-off-by:
-
David S. Miller authored
Sudarsana Reddy Kalluru says: ==================== qed: dcbx fix series. The patch series contains the minor bug fixes for qed dcbx module. Please consider applying this to 'net' branch. ==================== Signed-off-by: -
Sudarsana Reddy Kalluru authored
App count is not updated while adding new app entry to the dcbx app table. Signed-off-by:
Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
MFW now supports the Selection field for IEEE mode. Add driver changes to use the newer MFW masks to read/write the port-id value. Signed-off-by:
-
Sudarsana Reddy Kalluru authored
Ethtype value is being read incorrectly in ieee-dcbx mode. Use the correct mfw mask value. Signed-off-by:
-
Sudarsana Reddy Kalluru authored
Endian-ness conversion is not needed for priority-to-TC field as the field is already being read/written by the driver in big-endian way. Signed-off-by:
-
- 08 Aug, 2016 17 commits
-
-
Xin Long authored
Commit 52253db9 ("sctp: also point GSO head_skb to the sk when it's available") used event->chunk->head_skb to get the head_skb in sctp_ulpevent_set_owner(). But at that moment, the event->chunk was NULL, as it cloned the skb in sctp_ulpevent_make_rcvmsg(). Therefore, that patch didn't really work. This patch is to move the event->chunk initialization before calling sctp_ulpevent_receive_data() so that it uses event->chunk when it's valid. Fixes: 52253db9 ("sctp: also point GSO head_skb to the sk when it's available") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
pravin shelar authored
vxlan driver has bypass for local vxlan traffic, but that depends on information about all VNIs on local system in vxlan driver. This is not available in case of LWT. Therefore following patch disable encap bypass for LWT vxlan traffic. Fixes: ee122c79 ("vxlan: Flow based tunneling"). Reported-by:
Jakub Libosvar <jlibosva@redhat.com> Signed-off-by:
Pravin B Shelar <pshelar@ovn.org> Acked-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
pravin shelar authored
LWT user can specify destination as well as source ip address for given tunnel endpoint. But vxlan is ignoring given source ip address. Following patch uses both ip address to route the tunnel packet. This consistent with other LWT implementations, like GENEVE and GRE. Fixes: ee122c79 ("vxlan: Flow based tunneling"). Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== Few BPF helper related checksum fixes The set contains three fixes with regards to CHECKSUM_COMPLETE and BPF helper functions. For details please see individual patches. Thanks! v1 -> v2: - Fixed make htmldocs issue reported by kbuild bot. - Rest as is. ==================== Signed-off-by: -
Daniel Borkmann authored
When having skbs on ingress with CHECKSUM_COMPLETE, tc BPF programs don't push rcsum of mac header back in and after BPF run back pull out again as opposed to some other subsystems (ovs, for example). For cases like q-in-q, meaning when a vlan tag for offloading is already present and we're about to push another one, then skb_vlan_push() pushes the inner one into the skb, increasing mac header and skb_postpush_rcsum()'ing the 4 bytes vlan header diff. Likewise, for the reverse operation in skb_vlan_pop() for the case where vlan header needs to be pulled out of the skb, we're decreasing the mac header and skb_postpull_rcsum()'ing the 4 bytes rcsum of the vlan header that was removed. However mangling the rcsum here will lead to hw csum failure for BPF case, since we're pulling or pushing data that was not part of the current rcsum. Changing tc BPF programs in general to push/pull rcsum around BPF_PROG_RUN() is also not really an option since current behaviour is ABI by now, but apart from that would also mean to do quite a bit of useless work in the sense that usually 12 bytes need to be rcsum pushed/pulled also when we don't need to touch this vlan related corner case. One way to fix it would be to push the necessary rcsum fixup down into vlan helpers that are (mostly) slow-path anyway. Fixes: 4e10df9a ("bpf: introduce bpf_skb_vlan_push/pop() helpers") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Daniel Borkmann authored
bpf_skb_store_bytes() invocations above L2 header need BPF_F_RECOMPUTE_CSUM flag for updates, so that CHECKSUM_COMPLETE will be fixed up along the way. Where we ran into an issue with bpf_skb_store_bytes() is when we did a single-byte update on the IPv6 hoplimit despite using BPF_F_RECOMPUTE_CSUM flag; simple ping via ICMPv6 triggered a hw csum failure as a result. The underlying issue has been tracked down to a buffer alignment issue. Meaning, that csum_partial() computations via skb_postpull_rcsum() and skb_postpush_rcsum() pair invoked had a wrong result since they operated on an odd address for the hoplimit, while other computations were done on an even address. This mix doesn't work as-is with skb_postpull_rcsum(), skb_postpush_rcsum() pair as it always expects at least half-word alignment of input buffers, which is normally the case. Thus, instead of these helpers using csum_sub() and (implicitly) csum_add(), we need to use csum_block_sub(), csum_block_add(), respectively. For unaligned offsets, they rotate the sum to align it to a half-word boundary again, otherwise they work the same as csum_sub() and csum_add(). Adding __skb_postpull_rcsum(), __skb_postpush_rcsum() variants that take the offset as an input and adapting bpf_skb_store_bytes() to them fixes the hw csum failures again. The skb_postpull_rcsum(), skb_postpush_rcsum() helpers use a 0 constant for offset so that the compiler optimizes the offset & 1 test away and generates the same code as with csum_sub()/_add(). Fixes: 608cd71a ("tc: bpf: generalize pedit action") Signed-off-by:
-
Daniel Borkmann authored
Follow-up to commit f8ffad69 ("bpf: add skb_postpush_rcsum and fix dev_forward_skb occasions") to fix an issue for dev_queue_xmit() redirect locations which need CHECKSUM_COMPLETE fixups on ingress. For the same reasons as described in f8ffad69 already, we of course also need this here, since dev_queue_xmit() on a veth device will let us end up in the dev_forward_skb() helper again to cross namespaces. Latter then calls into skb_postpull_rcsum() to pull out L2 header, so that netif_rx_internal() sees CHECKSUM_COMPLETE as it is expected. That is, CHECKSUM_COMPLETE on ingress covering L2 _payload_, not L2 headers. Also here we have to address bpf_redirect() and bpf_clone_redirect(). Fixes: 3896d655 ("bpf: introduce bpf_clone_redirect() helper") Fixes: 27b29f63 ("bpf: add bpf_redirect() helper") Signed-off-by:
-
Paul Gortmaker authored
The call site for this function appears as: #ifdef DEBUG data->msg_enable = DEBUG; dump_eth_one(dev); #endif ...leading to the following warning for !DEBUG builds: drivers/net/ethernet/tundra/tsi108_eth.c:169:13: warning: 'dump_eth_one' defined but not used [-Wunused-function] static void dump_eth_one(struct net_device *dev) ^ ...when using the arch/powerpc/configs/mpc7448_hpc2_defconfig Put the function definition under the same #ifdef as the call site to avoid the warning. Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by:Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: DCB fixes Patches 1 and 2 fix a problem in which PAUSE frames settings are wrongly overridden when ieee_setpfc() gets called. Patch 3 adds a missing rollback in port's creation error path. ==================== Signed-off-by: -
Ido Schimmel authored
We correctly execute mlxsw_sp_port_dcb_fini() when port is removed, but I missed its rollback in the error path of port creation, so add it. Fixes: f00817df ("mlxsw: spectrum: Introduce support for Data Center Bridging (DCB)") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
The PFCC register is used to configure both PAUSE and PFC frames. Therefore, when PFC frames are disabled we must make sure we don't mistakenly also disable PAUSE frames (which might be enabled). Fix this by packing the PFCC register with the current PAUSE settings. Note that this register is also accessed via ethtool ops, but there we are guaranteed to have PFC disabled. Fixes: d81a6bdb ("mlxsw: spectrum: Add IEEE 802.1Qbb PFC support") Signed-off-by:
-
Ido Schimmel authored
When ieee_setpfc() gets called, PAUSE frames are not necessarily disabled on the port. Check if PAUSE frames are disabled or enabled and configure the port's headroom buffer accordingly. Fixes: d81a6bdb ("mlxsw: spectrum: Add IEEE 802.1Qbb PFC support") Signed-off-by:
-
Phil Sutter authored
Looks like a simple copy'n'paste error. Fixes: 1aa661f5 ("rhashtable-test: Measure time to insert, remove & traverse entries") Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
-
David S. Miller authored
Phil Sutter says: ==================== sctp_diag: A bunch of fixes for upcoming 'ss' support The following series contains a number of fixes necessary to make my yet unpublished 'ss' support patch functional. Changes since v1: - Fixed patch 2/3 - Rebased whole series onto current net-next/master Changes since v2: - Improved description of patch 2/3 ==================== Signed-off-by: -
Phil Sutter authored
Since 'ss' always adds TCPF_CLOSE to idiag_states flags, sctp_diag can't rely upon TCPF_LISTEN flag solely being present when listening sockets are requested. Signed-off-by:
-
Phil Sutter authored
The asoc's timer value is not kept in asoc->timeouts array but in it's primary transport instead. Furthermore, we must export the timer only if it is pending, otherwise the value will underrun when stored in an unsigned variable and user space will only see a very large timeout value. Signed-off-by:
-
Phil Sutter authored
This is required to correctly interpret INET_DIAG_INFO messages exported by sctp_diag module. Signed-off-by:
-
- 07 Aug, 2016 4 commits
-
-
Harini Katakam authored
USRIO and JUMBO CAPS have the same mask. Fix the same. Fixes: ce721a70 ("net: ethernet: cadence-macb: Add disabled usrio caps") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by:
Harini Katakam <harinik@xilinx.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2016-08-05' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== First set of fixes for the current cycle: * fix 80+80 bandwidth warning * fix powersave with mac80211 TXQ implementation * use correct way to free SKBs from multicast buffering * mesh: fix operation ordering to work with all drivers * mesh: end service period even when peer goes away * mesh: correct HT opmode validity checks * pass hw pointer from mac80211 to driver in TPT method, fixing a bug (in a bit the wrong way, but that's what we have right now) ==================== Signed-off-by:
-
Alexei Starovoitov authored
increase test coverage to check previously missing 'update when full' Signed-off-by:
-
Alexei Starovoitov authored
The introduction of pre-allocated hash elements inadvertently broke the behavior of bpf hash maps where users expected to call bpf_map_update_elem() without considering that the map can be full. Some programs do: old_value = bpf_map_lookup_elem(map, key); if (old_value) { ... prepare new_value on stack ... bpf_map_update_elem(map, key, new_value); } Before pre-alloc the update() for existing element would work even in 'map full' condition. Restore this behavior. The above program could have updated old_value in place instead of update() which would be faster and most programs use that approach, but sometimes the values are large and the programs use update() helper to do atomic replacement of the element. Note we cannot simply update element's value in-place like percpu hash map does and have to allocate extra num_possible_cpu elements and use this extra reserve when the map is full. Fixes: 6c905981 ("bpf: pre-allocate hash map elements") Signed-off-by:
-
- 06 Aug, 2016 5 commits
-
-
Geert Uytterhoeven authored
On 32-bit (e.g. with m68k-linux-gnu-gcc-4.1): drivers/net/dsa/b53/b53_common.c: In function ‘b53_arl_read’: drivers/net/dsa/b53/b53_common.c:1072: warning: integer constant is too large for ‘long’ type Fixes: 1da6df85 ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
David Forster authored
Panic occurs when issuing "cat /proc/net/route" whilst populating FIB with > 1M routes. Use of cached node pointer in fib_route_get_idx is unsafe. BUG: unable to handle kernel paging request at ffffc90001630024 IP: [<ffffffff814cf6a0>] leaf_walk_rcu+0x10/0xe0 PGD 11b08d067 PUD 11b08e067 PMD dac4b067 PTE 0 Oops: 0000 [#1] SMP Modules linked in: nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscac snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep virti acpi_cpufreq button parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd tio_ring virtio floppy uhci_hcd ehci_hcd usbcore usb_common libata scsi_mod CPU: 1 PID: 785 Comm: cat Not tainted 4.2.0-rc8+ #4 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 task: ffff8800da1c0bc0 ti: ffff88011a05c000 task.ti: ffff88011a05c000 RIP: 0010:[<ffffffff814cf6a0>] [<ffffffff814cf6a0>] leaf_walk_rcu+0x10/0xe0 RSP: 0018:ffff88011a05fda0 EFLAGS: 00010202 RAX: ffff8800d8a40c00 RBX: ffff8800da4af940 RCX: ffff88011a05ff20 RDX: ffffc90001630020 RSI: 0000000001013531 RDI: ffff8800da4af950 RBP: 0000000000000000 R08: ffff8800da1f9a00 R09: 0000000000000000 R10: ffff8800db45b7e4 R11: 0000000000000246 R12: ffff8800da4af950 R13: ffff8800d97a74c0 R14: 0000000000000000 R15: ffff8800d97a7480 FS: 00007fd3970e0700(0000) GS:ffff88011fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffc90001630024 CR3: 000000011a7e4000 CR4: 00000000000006e0 Stack: ffffffff814d00d3 0000000000000000 ffff88011a05ff20 ffff8800da1f9a00 ffffffff811dd8b9 0000000000000800 0000000000020000 00007fd396f35000 ffffffff811f8714 0000000000003431 ffffffff8138dce0 0000000000000f80 Call Trace: [<ffffffff814d00d3>] ? fib_route_seq_start+0x93/0xc0 [<ffffffff811dd8b9>] ? seq_read+0x149/0x380 [<ffffffff811f8714>] ? fsnotify+0x3b4/0x500 [<ffffffff8138dce0>] ? process_echoes+0x70/0x70 [<ffffffff8121cfa7>] ? proc_reg_read+0x47/0x70 [<ffffffff811bb823>] ? __vfs_read+0x23/0xd0 [<ffffffff811bbd42>] ? rw_verify_area+0x52/0xf0 [<ffffffff811bbe61>] ? vfs_read+0x81/0x120 [<ffffffff811bcbc2>] ? SyS_read+0x42/0xa0 [<ffffffff81549ab2>] ? entry_SYSCALL_64_fastpath+0x16/0x75 Code: 48 85 c0 75 d8 f3 c3 31 c0 c3 f3 c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 a 04 89 f0 33 02 44 89 c9 48 d3 e8 0f b6 4a 05 49 89 RIP [<ffffffff814cf6a0>] leaf_walk_rcu+0x10/0xe0 RSP <ffff88011a05fda0> CR2: ffffc90001630024 Signed-off-by:
Dave Forster <dforster@brocade.com> Acked-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
David Howells authored
Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by: -
Wei Yongjun authored
commit a94efbd7 ("ethernet: arc: emac_main: add missing of_node_put after calling of_parse_phandle") added missing of_node_put after calling of_parse_phandle, but missing the devm_ioremap_resource() error handling case. Signed-off-by:
Wei Yongjun <weiyj.lk@gmail.com> Reviewed-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Ian Wienand authored
net_device->ndo_set_rx_headroom (introduced in 871b642a) says "Setting a negtaive value reset the rx headroom to the default value". It seems that the OVS implementation in 3a927bc7 overlooked this and sets dev->needed_headroom unconditionally. This doesn't have an immediate effect, but can mess up later LL_RESERVED_SPACE calculations, such as done in net/ipv6/mcast.c:mld_newpack. For reference, this issue was found from a skb_panic raised there after the length calculations had given the wrong result. Note the other current users of this interface (drivers/net/tun.c:tun_set_headroom and drivers/net/veth.c:veth_set_rx_headroom) are both checking this correctly thus need no modification. Thanks to Ben for some pointers from the crash dumps! Cc: Benjamin Poirier <bpoirier@suse.com> Cc: Paolo Abeni <pabeni@redhat.com> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1361414Signed-off-by:
Ian Wienand <iwienand@redhat.com> Signed-off-by:
-
