- 14 Jan, 2013 4 commits
-
-
Jingoo Han authored
Use devm_clk_get() rather than clk_get() to make cleanup paths more simple. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Shane Huang authored
NCQ capability was used to check availability of SATA Settings page from Identify Device Data Log, which contains DevSlp timing variables. It does not work on some HDDs and leads to error messages. IDENTIFY word 78 bit 5(Hardware Feature Control) can't work either because it is only the sufficient condition of Identify Device data log, not the necessary condition. This patch replaced ata_device->sata_settings with ->devslp_timing to only save DevSlp timing variables(8 bytes), instead of the whole SATA Settings page(512 bytes). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=51881Reported-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
Shane Huang <shane.huang@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Hugh Daschbach authored
Silicon does not support standard AHCI BAR assignment. Add vendor/device exception to force BAR 2. Signed-off-by:
Hugh Daschbach <hugh.daschbach@enmotus.com> Signed-off-by:
-
Bian Yu authored
It should be a mistake introduced by commit 8d899e70. qc->flags can't be set AC_ERR_* Signed-off-by:
Bian Yu <bianyu@kedacom.com> Signed-off-by:
-
- 11 Jan, 2013 27 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull a hwmon patch from Guenter Roeck: "Fix build error in vexpress driver" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (vexpress) Fix build error seen if CONFIG_OF_DEVICE is not set
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "The audit fixes have been floating around for a while - Al and Eric aren't responding to either myself or Kees so I asked Kees to re-review them and here they are." * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits) lib/rbtree.c: avoid the use of non-static __always_inline MAINTAINERS: Omar had moved mm: compaction: partially revert capture of suitable high-order page linux/audit.h: move ptrace.h include to kernel header kernel/audit.c: avoid negative sleep durations audit: catch possible NULL audit buffers audit: create explicit AUDIT_SECCOMP event type MAINTAINERS: fix a status pattern MAINTAINERS: fix arch/arm/plat-omap/include/plat/omap_hwmod.h mm: thp: acquire the anon_vma rwsem for write during split mm: mmap: annotate vm_lock_anon_vma locking properly for lockdep lockdep, rwsem: provide down_write_nest_lock() arch/mn10300/Kconfig: select CONFIG_GENERIC_ATOMIC64 mm: bootmem: fix free_all_bootmem_core() with odd bitmap alignment mm: use aligned zone start for pfn_to_bitidx calculation fs/exec.c: work around icc miscompilation mm: compaction: fix echo 1 > compact_memory return error issue mm: memblock: fix wrong memmove size in memblock_merge_regions() drivers/video/ssd1307fb.c: fix bit order bug in the byte translation function mm: migrate: check page_count of THP before migrating ...
-
Michel Lespinasse authored
lib/rbtree.c declared __rb_erase_color() as __always_inline void, and then exported it with EXPORT_SYMBOL. This was because __rb_erase_color() must be exported for augmented rbtree users, but it must also be inlined into rb_erase() so that the dummy callback can get optimized out of that call site. (Actually with a modern compiler, none of the dummy callback functions should even be generated as separate text functions). The above usage is legal C, but it was unusual enough for some compilers to warn about it. This change makes things more explicit, with a static __always_inline ____rb_erase_color function for use in rb_erase(), and a separate non-inline __rb_erase_color function for use in rb_erase_augmented call sites. Signed-off-by:
Michel Lespinasse <walken@google.com> Reported-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Chen Gang authored
Signed-off-by:
Chen Gang <gang.chen@asianux.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Omar Ramirez Luna <omar.ramirez@copitl.com> Cc: David Miller <davem@davemloft.net> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by:
-
Mel Gorman authored
Eric Wong reported on 3.7 and 3.8-rc2 that ppoll() got stuck when waiting for POLLIN on a local TCP socket. It was easier to trigger if there was disk IO and dirty pages at the same time and he bisected it to commit 1fb3f8ca ("mm: compaction: capture a suitable high-order page immediately when it is made available"). The intention of that patch was to improve high-order allocations under memory pressure after changes made to reclaim in 3.6 drastically hurt THP allocations but the approach was flawed. For Eric, the problem was that page->pfmemalloc was not being cleared for captured pages leading to a poor interaction with swap-over-NFS support causing the packets to be dropped. However, I identified a few more problems with the patch including the fact that it can increase contention on zone->lock in some cases which could result in async direct compaction being aborted early. In retrospect the capture patch took the wrong approach. What it should have done is mark the pageblock being migrated as MIGRATE_ISOLATE if it was allocating for THP and avoided races that way. While the patch was showing to improve allocation success rates at the time, the benefit is marginal given the relative complexity and it should be revisited from scratch in the context of the other reclaim-related changes that have taken place since the patch was first written and tested. This patch partially reverts commit 1fb3f8ca ("mm: compaction: capture a suitable high-order page immediately when it is made available"). Reported-and-tested-by:
Eric Wong <normalperson@yhbt.net> Tested-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Mel Gorman <mgorman@suse.de> Cc: David Miller <davem@davemloft.net> Signed-off-by:
-
Mike Frysinger authored
While the kernel internals want pt_regs (and so it includes linux/ptrace.h), the user version of audit.h does not need it. So move the include out of the uapi version. This avoids issues where people want the audit defines and userland ptrace api. Including both the kernel ptrace and the userland ptrace headers can easily lead to failure. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Andrew Morton authored
audit_log_start() performs the same jiffies comparison in two places. If sufficient time has elapsed between the two comparisons, the second one produces a negative sleep duration: schedule_timeout: wrong timeout value fffffffffffffff0 Pid: 6606, comm: trinity-child1 Not tainted 3.8.0-rc1+ #43 Call Trace: schedule_timeout+0x305/0x340 audit_log_start+0x311/0x470 audit_log_exit+0x4b/0xfb0 __audit_syscall_exit+0x25f/0x2c0 sysret_audit+0x17/0x21 Fix it by performing the comparison a single time. Reported-by:Dave Jones <davej@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Reviewed-by:
-
Kees Cook authored
It's possible for audit_log_start() to return NULL. Handle it in the various callers. Signed-off-by:
-
Kees Cook authored
The seccomp path was using AUDIT_ANOM_ABEND from when seccomp mode 1 could only kill a process. While we still want to make sure an audit record is forced on a kill, this should use a separate record type since seccomp mode 2 introduces other behaviors. In the case of "handled" behaviors (process wasn't killed), only emit a record if the process is under inspection. This change also fixes userspace examination of seccomp audit events, since it was considered malformed due to missing fields of the AUDIT_ANOM_ABEND event type. Signed-off-by:
Will Drewry <wad@chromium.org> Acked-by:
Steve Grubb <sgrubb@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Zhang Yanfei authored
Change MAINTAINED to Maintained. Signed-off-by:
Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by:
-
Zhang Yanfei authored
This file was moved to arch/arm/mach-omap2/omap=5Fhwmod.h by commit 2a296c8f ("ARM: OMAP: Make plat/omap=5Fhwmod.h local to mach-omap2"). Signed-off-by:
-
Mel Gorman authored
Zhouping Liu reported the following against 3.8-rc1 when running a mmap testcase from LTP. mapcount 0 page_mapcount 3 ------------[ cut here ]------------ kernel BUG at mm/huge_memory.c:1798! invalid opcode: 0000 [#1] SMP Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables bnep bluetooth rfkill iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter ip_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi vfat fat dm_mirror dm_region_hash dm_log dm_mod cdc_ether iTCO_wdt i7core_edac coretemp usbnet iTCO_vendor_support mii crc32c_intel edac_core lpc_ich shpchp ioatdma mfd_core i2c_i801 pcspkr serio_raw bnx2 microcode dca vhost_net tun macvtap macvlan kvm_intel kvm uinput mgag200 sr_mod cdrom i2c_algo_bit sd_mod drm_kms_helper crc_t10dif ata_generic pata_acpi ttm ata_piix drm libata i2c_core megaraid_sas CPU 1 Pid: 23217, comm: mmap10 Not tainted 3.8.0-rc1mainline+ #17 IBM IBM System x3400 M3 Server -[7379I08]-/69Y4356 RIP: __split_huge_page+0x677/0x6d0 RSP: 0000:ffff88017a03fc08 EFLAGS: 00010293 RAX: 0000000000000003 RBX: ffff88027a6c22e0 RCX: 00000000000034d2 RDX: 000000000000748b RSI: 0000000000000046 RDI: 0000000000000246 RBP: ffff88017a03fcb8 R08: ffffffff819d2440 R09: 000000000000054a R10: 0000000000aaaaaa R11: 00000000ffffffff R12: 0000000000000000 R13: 00007f4f11a00000 R14: ffff880179e96e00 R15: ffffea0005c08000 FS: 00007f4f11f4a740(0000) GS:ffff88017bc20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000037e9ebb404 CR3: 000000017a436000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process mmap10 (pid: 23217, threadinfo ffff88017a03e000, task ffff880172dd32e0) Stack: ffff88017a540ec8 ffff88017a03fc20 ffffffff816017b5 ffff88017a03fc88 ffffffff812fa014 0000000000000000 ffff880279ebd5c0 00000000f4f11a4c 00000007f4f11f49 00000007f4f11a00 ffff88017a540ef0 ffff88017a540ee8 Call Trace: split_huge_page+0x68/0xb0 __split_huge_page_pmd+0x134/0x330 split_huge_page_pmd_mm+0x51/0x60 split_huge_page_address+0x3b/0x50 __vma_adjust_trans_huge+0x9c/0xf0 vma_adjust+0x684/0x750 __split_vma.isra.28+0x1fa/0x220 do_munmap+0xf9/0x420 vm_munmap+0x4e/0x70 sys_munmap+0x2b/0x40 system_call_fastpath+0x16/0x1b Alexander Beregalov and Alex Xu reported similar bugs and Hillf Danton identified that commit 5a505085 ("mm/rmap: Convert the struct anon_vma::mutex to an rwsem") and commit 4fc3f1d6 ("mm/rmap, migration: Make rmap_walk_anon() and try_to_unmap_anon() more scalable") were likely the problem. Reverting these commits was reported to solve the problem for Alexander. Despite the reason for these commits, NUMA balancing is not the direct source of the problem. split_huge_page() expects the anon_vma lock to be exclusive to serialise the whole split operation. Ordinarily it is expected that the anon_vma lock would only be required when updating the avcs but THP also uses the anon_vma rwsem for collapse and split operations where the page lock or compound lock cannot be used (as the page is changing from base to THP or vice versa) and the page table locks are insufficient. This patch takes the anon_vma lock for write to serialise against parallel split_huge_page as THP expected before the conversion to rwsem. Reported-and-tested-by:Zhouping Liu <zliu@redhat.com> Reported-by:
Alexander Beregalov <a.beregalov@gmail.com> Reported-by:
Alex Xu <alex_y_xu@yahoo.ca> Signed-off-by:
-
Jiri Kosina authored
Commit 5a505085 ("mm/rmap: Convert the struct anon_vma::mutex to an rwsem") turned anon_vma mutex to rwsem. However, the properly annotated nested locking in mm_take_all_locks() has been converted from mutex_lock_nest_lock(&anon_vma->root->mutex, &mm->mmap_sem); to down_write(&anon_vma->root->rwsem); which is incomplete, and causes the false positive report from lockdep below. Annotate the fact that mmap_sem is used as an outter lock to serialize taking of all the anon_vma rwsems at once no matter the order, using the down_write_nest_lock() primitive. This patch fixes this lockdep report: ============================================= [ INFO: possible recursive locking detected ] 3.8.0-rc2-00036-g5f738967 #171 Not tainted --------------------------------------------- qemu-kvm/2315 is trying to acquire lock: (&anon_vma->rwsem){+.+...}, at: mm_take_all_locks+0x149/0x1b0 but task is already holding lock: (&anon_vma->rwsem){+.+...}, at: mm_take_all_locks+0x149/0x1b0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&anon_vma->rwsem); lock(&anon_vma->rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by qemu-kvm/2315: #0: (&mm->mmap_sem){++++++}, at: do_mmu_notifier_register+0xfc/0x170 #1: (mm_all_locks_mutex){+.+...}, at: mm_take_all_locks+0x36/0x1b0 #2: (&mapping->i_mmap_mutex){+.+...}, at: mm_take_all_locks+0xc9/0x1b0 #3: (&anon_vma->rwsem){+.+...}, at: mm_take_all_locks+0x149/0x1b0 stack backtrace: Pid: 2315, comm: qemu-kvm Not tainted 3.8.0-rc2-00036-g5f738967 #171 Call Trace: print_deadlock_bug+0xf2/0x100 validate_chain+0x4f6/0x720 __lock_acquire+0x359/0x580 lock_acquire+0x121/0x190 down_write+0x3f/0x70 mm_take_all_locks+0x149/0x1b0 do_mmu_notifier_register+0x68/0x170 mmu_notifier_register+0xe/0x10 kvm_create_vm+0x22b/0x330 [kvm] kvm_dev_ioctl+0xf8/0x1a0 [kvm] do_vfs_ioctl+0x9d/0x350 sys_ioctl+0x91/0xb0 system_call_fastpath+0x16/0x1b Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mel Gorman <mel@csn.ul.ie> Tested-by:
Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by:
-
Jiri Kosina authored
down_write_nest_lock() provides a means to annotate locking scenario where an outer lock is guaranteed to serialize the order nested locks are being acquired. This is analogoue to already existing mutex_lock_nest_lock() and spin_lock_nest_lock(). Signed-off-by:
-
Andrew Morton authored
mn10300 doesn't provide its own atomic64 implementation, so it should pull in the generic one. Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Max Filippov authored
Currently free_all_bootmem_core ignores that node_min_pfn may be not multiple of BITS_PER_LONG. Eg commit 6dccdcbe ("mm: bootmem: fix checking the bitmap when finally freeing bootmem") shifts vec by lower bits of start instead of lower bits of idx. Also if (IS_ALIGNED(start, BITS_PER_LONG) && vec == ~0UL) assumes that vec bit 0 corresponds to start pfn, which is only true when node_min_pfn is a multiple of BITS_PER_LONG. Also loop in the else clause can double-free pages (e.g. with node_min_pfn == start == 1, map[0] == ~0 on 32-bit machine page 32 will be double-freed). This bug causes the following message during xtensa kernel boot: bootmem::free_all_bootmem_core nid=0 start=1 end=8000 BUG: Bad page state in process swapper pfn:00001 page:d04bd020 count:0 mapcount:-127 mapping: (null) index:0x2 page flags: 0x0() Call Trace: bad_page+0x8c/0x9c free_pages_prepare+0x5e/0x88 free_hot_cold_page+0xc/0xa0 __free_pages+0x24/0x38 __free_pages_bootmem+0x54/0x56 free_all_bootmem_core$part$11+0xeb/0x138 free_all_bootmem+0x46/0x58 mem_init+0x25/0xa4 start_kernel+0x11e/0x25c should_never_return+0x0/0x3be7 The fix is the following: - always align vec so that its bit 0 corresponds to start - provide BITS_PER_LONG bits in vec, if those bits are available in the map - don't free pages past next start position in the else clause. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Cc: Gavin Shan <shangw@linux.vnet.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Prasad Koya <prasad.koya@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Laura Abbott authored
The current calculation in pfn_to_bitidx assumes that (pfn - zone->zone_start_pfn) >> pageblock_order will return the same bit for all pfn in a pageblock. If zone_start_pfn is not aligned to pageblock_nr_pages, this may not always be correct. Consider the following with pageblock order = 10, zone start 2MB: pfn | pfn - zone start | (pfn - zone start) >> page block order ---------------------------------------------------------------- 0x26000 | 0x25e00 | 0x97 0x26100 | 0x25f00 | 0x97 0x26200 | 0x26000 | 0x98 0x26300 | 0x26100 | 0x98 This means that calling {get,set}_pageblock_migratetype on a single page will not set the migratetype for the full block. Fix this by rounding down zone_start_pfn when doing the bitidx calculation. For our use case, the effects of this bug were mostly tied to the fact that CMA allocations would either take a long time or fail to happen. Depending on the driver using CMA, this could result in anything from visual glitches to application failures. Signed-off-by:Laura Abbott <lauraa@codeaurora.org> Acked-by:
-
Xi Wang authored
The tricky problem is this check: if (i++ >= max) icc (mis)optimizes this check as: if (++i > max) The check now becomes a no-op since max is MAX_ARG_STRINGS (0x7FFFFFFF). This is "allowed" by the C standard, assuming i++ never overflows, because signed integer overflow is undefined behavior. This optimization effectively reverts the previous commit 362e6663 ("exec.c, compat.c: fix count(), compat_count() bounds checking") that tries to fix the check. This patch simply moves ++ after the check. Signed-off-by:
Xi Wang <xi.wang@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jason Liu authored
when run the folloing command under shell, it will return error sh/$ echo 1 > /proc/sys/vm/compact_memory sh/$ sh: write error: Bad address After strace, I found the following log: ... write(1, "1\n", 2) = 3 write(1, "", 4294967295) = -1 EFAULT (Bad address) write(2, "echo: write error: Bad address\n", 31echo: write error: Bad address ) = 31 This tells system return 3(COMPACT_COMPLETE) after write data to compact_memory. The fix is to make the system just return 0 instead 3(COMPACT_COMPLETE) from sysctl_compaction_handler after compaction_nodes finished. Signed-off-by:
Jason Liu <r64343@freescale.com> Suggested-by:
David Rientjes <rientjes@google.com> Acked-by:
-
Lin Feng authored
The memmove span covers from (next+1) to the end of the array, and the index of next is (i+1), so the index of (next+1) is (i+2). So the size of remaining array elements is (type->cnt - (i + 2)). Since the remaining elements of the memblock array are move forward by one element and there is only one additional element caused by this bug. So there won't be any write overflow here but read overflow. It may read one more element out of the array address if the array happens to be full. Commonly it doesn't matter at all but if the array happens to be located at the end a memblock, it may cause a invalid read operation for the physical address doesn't exist. There are 2 *happens to be* here, so I think the probability is quite low, I don't know if any guy is haunted by this bug before. Mostly I think it's user-invisible. Signed-off-by:
Lin Feng <linfeng@cn.fujitsu.com> Acked-by:
Tejun Heo <tj@kernel.org> Reviewed-by:
Wanpeng Li <liwanp@linux.vnet.ibm.com> Signed-off-by:
-
Maxime Ripard authored
This was leading to a strange behaviour when using the fbcon driver on top of this one: the letters were in the right order, but each letter had a vertical symmetry. This was because the addressing was right for the byte, but the addressing of each individual bit was inverted. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Brian Lilly <brian@crystalfontz.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Thomas Petazzoni <thomas@free-electrons.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Mel Gorman authored
Hugh Dickins pointed out that migrate_misplaced_transhuge_page() does not check page_count before migrating like base page migration and khugepage. He could not see why this was safe and he is right. The potential impact of the bug is avoided due to the limitations of NUMA balancing. The page_mapcount() check ensures that only a single address space is using this page and as THPs are typically private it should not be possible for another address space to fault it in parallel. If the address space has one associated task then it's difficult to have both a GUP pin and be referencing the page at the same time. If there are multiple tasks then a buggy scenario requires that another thread be accessing the page while the direct IO is in flight. This is dodgy behaviour as there is a possibility of corruption with or without THP migration. It would be While we happen to be safe for the most part it is shoddy to depend on such "safety" so this patch checks the page count similar to anonymous pages. Note that this does not mean that the page_mapcount() check can go away. If we were to remove the page_mapcount() check the the THP would have to be unmapped from all referencing PTEs, replaced with migration PTEs and restored properly afterwards. Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Acked-by:
-
Andrew Morton authored
Fix the warning WARNING: drivers/rtc/rtc-da9055.o(.text+0xa71): Section mismatch in reference from the function da9055_rtc_probe() to the function .init.text:da9055_rtc_device_init() Signed-off-by:
-
David Decotigny authored
In some cases, free_irq_cpu_rmap() is called while holding a lock (eg rtnl). This can lead to deadlocks, because it invokes flush_scheduled_work() which ends up waiting for whole system workqueue to flush, but some pending works might try to acquire the lock we are already holding. This commit uses reference-counting to replace irq_run_affinity_notifiers(). It also removes irq_run_affinity_notifiers() altogether. [akpm@linux-foundation.org: eliminate free_cpu_rmap, rename cpu_rmap_reclaim() to cpu_rmap_release(), propagate kref_put() retval from cpu_rmap_put()] Signed-off-by:
David Decotigny <decot@googlers.com> Reviewed-by:
Ben Hutchings <bhutchings@solarflare.com> Acked-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Josh Triplett <josh@joshtriplett.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Or Gerlitz <ogerlitz@mellanox.com> Acked-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfix from Trond Myklebust: - Fix a socket lock leak in net/sunrpc/xprt.c * tag 'nfs-for-3.8-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Ensure we release the socket write lock if the rpc_task exits early
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull intel DRM fixes from Dave Airlie: "Just intel fixes, including getting the Ironlake systems back to the state they were in for 3.6." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Revert shrinker changes from "Track unbound pages" drm/i915: Use pixel size for computing linear offsets into a sprite drm/i915: Add DEBUG messages to all intel_create_user_framebuffer error paths drm/i915: The sprite scaler on Ironlake also support YUV planes drm: Only evict the blocks required to create the requested hole drm/i915: Treat crtc->mode.clock == 0 as disabled Revert "drm/i915: no lvds quirk for Zotac ZDBOX SD ID12/ID13" drm/i915; Only increment the user-pin-count after successfully pinning the bo
-
Mel Gorman authored
Eric Wong reported on 3.7 and 3.8-rc2 that ppoll() got stuck when waiting for POLLIN on a local TCP socket. It was easier to trigger if there was disk IO and dirty pages at the same time and he bisected it to commit 1fb3f8ca ("mm: compaction: capture a suitable high-order page immediately when it is made available"). The intention of that patch was to improve high-order allocations under memory pressure after changes made to reclaim in 3.6 drastically hurt THP allocations but the approach was flawed. For Eric, the problem was that page->pfmemalloc was not being cleared for captured pages leading to a poor interaction with swap-over-NFS support causing the packets to be dropped. However, I identified a few more problems with the patch including the fact that it can increase contention on zone->lock in some cases which could result in async direct compaction being aborted early. In retrospect the capture patch took the wrong approach. What it should have done is mark the pageblock being migrated as MIGRATE_ISOLATE if it was allocating for THP and avoided races that way. While the patch was showing to improve allocation success rates at the time, the benefit is marginal given the relative complexity and it should be revisited from scratch in the context of the other reclaim-related changes that have taken place since the patch was first written and tested. This patch partially reverts commit 1fb3f8ca "mm: compaction: capture a suitable high-order page immediately when it is made available". Reported-and-tested-by:
-
- 10 Jan, 2013 9 commits
-
-
Randy Dunlap authored
Fix kernel-doc warnings in fs/seq_file.c: Warning(fs/seq_file.c:304): No description found for parameter 'whence' Warning(fs/seq_file.c:304): Excess function parameter 'origin' description in 'seq_lseek' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc warning in iov.c: Warning(drivers/pci/iov.c:752): No description found for parameter 'numvfs' Signed-off-by:
Don Dutile <ddutile@redhat.com> Signed-off-by:
-
Randy Dunlap authored
Fix new kernel-doc warning in auditfilter.c: Warning(kernel/auditfilter.c:1157): Excess function parameter 'uid' description in 'audit_receive_filter' Signed-off-by:
-
Randy Dunlap authored
Fix new kernel-doc warnings in clnt.c: Warning(net/sunrpc/clnt.c:561): No description found for parameter 'flavor' Warning(net/sunrpc/clnt.c:561): Excess function parameter 'auth' description in 'rpc_clone_client_set_auth' Signed-off-by:
-
git://people.freedesktop.org/~danvet/drm-intelDave Airlie authored
Daniel writes: "Pretty much all just major fixes: - 2 pieces of duct-tape for the ilk bug. - Sprite regression fixes from Chris. - OOPS fix for a div-by-zero from Chris, regression due to the modeset rework in 3.7, now brought to light by a benign change in 3.8. - Fix interrupted bo pinning, used to work around CS coherency issues on i830/i845 (kernel also has a w/a newly in 3.8, but pinning is more efficient if possible)."
-
git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds authored
Pull x86 platform driver bugfixes from Matthew Garrett. * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: asus-laptop: Fix potential invalid pointer dereference Update MAINTAINERS entry asus-laptop: Do not call HWRS on init sony-laptop: fix SNC buffer calls when SN06 returns Integers samsung-laptop: Add quirk for broken acpi_video backlight on N250P acer-wmi: add Aspire 5741G touchpad toggle key acer-wmi: change to emit touchpad on off key acer-wmi: fix obj is NULL but dereferenced MAINTAINERS: change the mail address of acer-wmi/msi-laptop maintainer
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM bugfixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: use dynamic percpu allocations for shared msrs area KVM: PPC: Book3S HV: Fix compilation without CONFIG_PPC_POWERNV powerpc: Corrected include header path in kvm_para.h Add rcu user eqs exception hooks for async page fault
-
Linus Torvalds authored
Merge tag 'trace-3.8-rc2-regression-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing regression fix from Steven Rostedt: "A change that came in this merge window broke the writing to the trace_options file. It causes garbage to be read during the compare of option names, and breaks setting options via the trace_options file, although options can still be set via the options/<option> files." * tag 'trace-3.8-rc2-regression-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix regression of trace_options file setting
-
Daniel Vetter authored
This partially reverts commit 6c085a72 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Aug 20 11:40:46 2012 +0200 drm/i915: Track unbound pages Closer inspection of that patch revealed a bunch of unrelated changes in the shrinker: - The shrinker count is now in pages instead of objects. - For counting the shrinkable objects the old code only looked at the inactive list, the new code looks at all bounds objects (including pinned ones). That is obviously in addition to the new unbound list. - The shrinker cound is no longer scaled with sysctl_vfs_cache_pressure. Note though that with the default tuning value of vfs_cache_pressue = 100 this doesn't affect the shrinker behaviour. - When actually shrinking objects, the old code first dropped purgeable objects, then normal (inactive) objects. Only then did it, in a last-ditch effort idle the gpu and evict everything. The new code omits the intermediate step of evicting normal inactive objects. Safe for the first change, which seems benign, and the shrinker count scaling, which is a bit a different story, the endresult of all these changes is that the shrinker is _much_ more likely to fall back to the last-ditch resort of idling the gpu and evicting everything. The old code could only do that if something else evicted lots of objects meanwhile (since without any other changes the nr_to_scan will be smaller than the object count). Reverting the vfs_cache_pressure behaviour itself is a bit bogus: Only dentry/inode object caches should scale their shrinker counts with vfs_cache_pressure. Originally I've had that change reverted, too. But Chris Wilson insisted that it's too bogus and shouldn't again see the light of day. Hence revert all these other changes and restore the old shrinker behaviour, with the minor adjustment that we now first scan the unbound list, then the inactive list for each object category (purgeable or normal). A similar patch has been tested by a few people affected by the gen4/5 hangs which started to appear in 3.7, which some people bisected to the "drm/i915: Track unbound pages" commit. But just disabling the unbound logic alone didn't change things at all. Note that this patch doesn't fix the referenced bugs, it only hides the underlying bug(s) well enough to restore pre-3.7 behaviour. The key to achieve that is to massively reduce the likelyhood of going into a full gpu stall and evicting everything. v2: Reword commit message a bit, taking Chris Wilson's comment into account. v3: On Chris Wilson's insistency, do not reinstate the rather bogus vfs_cache_pressure change. Tested-by:
Greg KH <gregkh@linuxfoundation.org> Tested-by:
Dave Kleikamp <dave.kleikamp@oracle.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=55984 References: https://bugs.freedesktop.org/show_bug.cgi?id=57122 References: https://bugs.freedesktop.org/show_bug.cgi?id=56916 References: https://bugs.freedesktop.org/show_bug.cgi?id=57136 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Acked-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
