It always returns 0, and nobody reads the return value anyway.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace 'l2tp_pernet(tunnel->l2tp_net)' with 'pn', which has been set
on the preceding line.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function is only used in l2tp_core.c.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function is only used in l2tp_core.c.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function, and the associated .priv field, are unused.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

This callback has never been implemented.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp_core.c verifies that ->session_close() is defined before calling
it. There's no need for a stub.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yangbo Lu says:

====================
Support DPAA PTP clock and timestamping

This patchset is to support DPAA FMAN PTP clock and HW timestamping.
It had been verified on both ARM platform and PPC platform.
- The patch #1 to patch #5 are to support DPAA FMAN 1588 timer in
  ptp_qoriq driver.
- The patch #6 to patch #10 are to add HW timestamping support in
  DPAA ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Added the get_ts_info interface for ethtool to check
the timestamping capability.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add hardware timestamping support
for dpaa_eth. On Rx, timestamping is enabled for
all frames. On Tx, we only instruct the hardware
to timestamp the frames marked accordingly by the
stack.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Defined frame description command FM_FD_CMD_UPD for
prepended data updating.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add fman_port_get_tstamp() interface
to get timestamp.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add set_tstamp interface for memac,
dtsec, and 10GEC controllers to configure HW timestamping.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to move ptp timer node out of fman.
Because ptp timer will be probed by ptp_qoriq driver,
it should be an independent device in case of conflict
memory mapping.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to move ptp timer node out of fman.
Because ptp timer will be probed by ptp_qoriq driver,
it should be an independent device in case of conflict
memory mapping.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add bindings description for DPAA
FMan 1588 timer, and also remove its description in
fsl-fman dt-bindings document.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to support DPAA (Data Path Acceleration Architecture)
1588 timer by adding "fsl,fman-ptp-timer" compatible, sharing
interrupt with FMan, adding FSL_DPAA_ETH dependency, and fixing
up register offset.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to share fman event interrupt because
the 1588 timer driver will also use this interrupt.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Support bridge router interfaces with non-default VLAN

Petr says:

When traffic is inserted on a router interface associated with an 802.1q
bridge, the VLAN that the traffic appears on is determined by PVID of
the bridge device itself. However currently mlxsw always configures such
traffic to be forwarded to VLAN 1, regardless of the bridge PVID.

Fix the problem by modifying the FID-handling code to assign such
traffic not to FID that corresponds to VLAN 1, but to a FID that
corresponds to the configured PVID. Bail out if there is no PVID. This
is implemented in patches #1 and #2.

From that point on, also forbid any changes to bridge device PVID,
because such changes would not be reflected. This is implemented in
patches #3, #4 and #5.

Finally in patch #6, introduce tests that use bridge as a routed
interface, and test mlxsw in both the currently-supported scenario of
using PVID 1, and the newly-supported one of using a custom PVID.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add test for cases where bridge itself acts as a router interface, with
front panel port attached to the bridge in question.

In the first test (router_bridge.sh), VLAN memberships are not
configured in any way, and everything uses default PVID of 1. Thus
traffic in $h1 and $h2 is untagged. This test ensures that the previous
patches didn't break a currently working scenario.

In the second test (router_bridge_vlan.sh), a VLAN 555 pvid untagged is
added to the bridge CPU port, with that VLAN leaving the bridge tagged
through its sole member port. The traffic is therefore expected to come
out tagged at $h1. This tests the fix introduced in the previous
patches.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When traffic passes through a router port, it needs to be assigned a FID
for ASIC to forward correctly. For bridges, this FID used to be the one
corresponding to VLAN 1. In a previous patch, this was changed to
instead use the PVID at the time that the RIF is created. This patch
guards PVID changes after the RIF was introduced.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to allow querying of the VID for which a RIF was created, add
a new function that returns a FID for a given RIF.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to guard against removal of a PVID for which a FID was
allocated, spectrum_switchdev needs to first determine whether there is
a RIF associated with a given bridge. To that end, publish a preexisting
function mlxsw_sp_rif_find_by_dev().
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For bridge netdevices, instead of assuming that the router traffic is on
VLAN 1, look at the bridge PVID.

This patch assumes that the PVID doesn't change after the router
interface is created (i.e. after the IP address is assigned).
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the follow-up patch, mlxsw_sp_rif_vlan_fid_get() will be changed in a
way that could fail. Give that function a possibility to explain the
failure through extack.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It will be helpful if we could display the drops due to zero window or no
enough window space.
So a new SNMP MIB entry is added to track this behavior.
This entry is named LINUX_MIB_TCPZEROWINDOWDROP and published in
/proc/net/netstat in TcpExt line as TCPZeroWindowDrop.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert GRO receive over to hash table.

When many parallel flows are present and being received on the same
RX queue, GRO processing can become expensive because each incoming
frame must traverse the per-NAPI GRO list at each protocol layer
of GRO receive (eth --> ipv{4,6} --> tcp).

Use the already computed hash to chain these SKBs in a hash table
instead of a simple list.

The first patch makes the GRO list a true list_head.

The second patch implements the hash table.

This series patches basic testing and I added some diagnostics
to make sure we really were aggregating GRO frames :-)
Signed-off-by: David S. Miller <davem@davemloft.net>

Improve the performance of GRO receive by splitting flows into
multiple hash chains.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Manage pending per-NAPI GRO packets via list_head.

Return an SKB pointer from the GRO receive handlers.  When GRO receive
handlers return non-NULL, it means that this SKB needs to be completed
at this time and removed from the NAPI queue.

Several operations are greatly simplified by this transformation,
especially timing out the oldest SKB in the list when gro_count
exceeds MAX_GRO_SKBS, and napi_gro_flush() which walks the queue
in reverse order.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Fix netpoll OOPS in r8169, from Ville Syrjälä.

 2) Fix bpf instruction alignment on powerpc et al., from Eric Dumazet.

 3) Don't ignore IFLA_MTU attribute when creating new ipvlan links. From
    Xin Long.

 4) Fix use after free in AF_PACKET, from Eric Dumazet.

 5) Mis-matched RTNL unlock in xen-netfront, from Ross Lagerwall.

 6) Fix VSOCK loopback on big-endian, from Claudio Imbrenda.

 7) Missing RX buffer offset correction when computing DMA addresses in
    mvneta driver, from Antoine Tenart.

 8) Fix crashes in DCCP's ccid3_hc_rx_send_feedback, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits)
  sfc: make function efx_rps_hash_bucket static
  strparser: Corrected typo in documentation.
  qmi_wwan: add support for the Dell Wireless 5821e module
  cxgb4: when disabling dcb set txq dcb priority to 0
  net_sched: remove a bogus warning in hfsc
  net: dccp: switch rx_tstamp_last_feedback to monotonic clock
  net: dccp: avoid crash in ccid3_hc_rx_send_feedback()
  net: Remove depends on HAS_DMA in case of platform dependency
  MAINTAINERS: Add file patterns for dsa device tree bindings
  net: mscc: make sparse happy
  net: mvneta: fix the Rx desc DMA address in the Rx path
  Documentation: e1000: Fix docs build error
  Documentation: e100: Fix docs build error
  Documentation: e1000: Use correct heading adornment
  Documentation: e100: Use correct heading adornment
  ipv6: mcast: fix unsolicited report interval after receiving querys
  vhost_net: validate sock before trying to put its fd
  VSOCK: fix loopback on big-endian systems
  net: ethernet: ti: davinci_cpdma: make function cpdma_desc_pool_create static
  xen-netfront: Update features after registering netdev
  ...

Heiner Kallweit says:

====================
r8169: improve PHY initialization and WoL handling

Series with smaller improvements regarding PHY initialization and
WoL handling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We can power down the PHY irregardless of WOL settings if interface
is down. So far we would have left the PHY enabled if WOL options
are set and the interface is brought down.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Let's make saved_wolopts a shadow copy of the WoL options. This allows
to simplify the code and get rid of calls to now unneeded function
__rtl8169_get_wol(). However don't remove __rtl8169_get_wol()
completely to be prepared for the case that we can respect BIOS WOL
settings again.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Let's move calling rtl8169_init_phy() to __rtl8169_resume().
It simplifies the code and avoids rtl8169_init_phy() being called
when resuming whilst interface is down. rtl_open() will initialize
the PHY when the interface is brought up.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
net: sched: couple of ndo_setup_tc fixes and adjustments

This patchset includes couple of patches that fix or adjust default
cases and return values in ndo_setup_tc implementations in drivers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

-EOPNOTSUPP is the error value that should be reported if a flower
command is not supported by a driver. Fix it in couple of Intel drivers.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the default case is not handled, which with future command
introductions would introduce a warning. So handle it.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the default case is not handled, which with future command
introductions would introduce a warning. So handle it and make the
switch a bit simplier removing unneeded "rc" variable.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Removed unused variable 'rxm' from tls_queue().
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>