- 11 Nov, 2019 40 commits
-
-
Darrick J. Wong authored
Make sure we attach dquots to both inodes before swapping their extents. This was found via manual code inspection by looking for places where we could call xfs_trans_mod_dquot without dquots attached to inodes, and confirmed by instrumenting the kernel and running xfs/328. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Christoph Hellwig <hch@lst.de>
-
Darrick J. Wong authored
In xfs_iomap_write_unwritten, we need to ensure that dquots are attached to the inode and quota blocks reserved so that we capture in the quota counters any blocks allocated to handle a bmbt split. This can happen on the first unwritten extent conversion to a preallocated sparse file on a fresh mount. This was found by running generic/311 with quotas enabled. The bug seems to have been introduced in "[XFS] rework iocore infrastructure, remove some code and make it more" from ~2002? Signed-off-by:
-
Darrick J. Wong authored
Coverity points out that xfs_btree_islastblock doesn't check the return value of xfs_btree_check_block. Since the question "Does the cursor point to the last block in this level?" only makes sense if the caller previously performed a lookup or seek operation, the block should already have been checked. Therefore, check the return value in an ASSERT and turn the whole thing into a static inline predicate. Coverity-id: 114069 Signed-off-by:
-
Christoph Hellwig authored
Move the code for extracting the incore header to the only caller that didn't already do that. Signed-off-by:
-
Christoph Hellwig authored
There is no real need for xfs_dir2_data_freescan wrapper, so rename xfs_dir2_data_freescan_int to xfs_dir2_data_freescan and let the callers dereference the mount pointer from the inode. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Replace the ->data_get_ftype and ->data_put_ftype dir ops methods with directly called xfs_dir2_data_get_ftype and xfs_dir2_data_put_ftype helpers that takes care of the differences between the directory format with and without the file type field. Signed-off-by:
-
Christoph Hellwig authored
Replace the ->data_bestfree_p dir ops method with a directly called xfs_dir2_data_bestfree_p helper that takes care of the differences between the v4 and v5 on-disk format. Signed-off-by:
-
Christoph Hellwig authored
Remove the XFS_DIR2_DATA_ENTSIZE and XFS_DIR3_DATA_ENTSIZE and open code them in their only caller, which now becomes so simple that we can turn it into an inline function. Signed-off-by:
-
Christoph Hellwig authored
Move the data block fixed offsets towards our structure for dir/attr geometry parameters. Signed-off-by:
-
Christoph Hellwig authored
Replace the ->data_entry_tag_p dir ops method with a directly called xfs_dir2_data_entry_tag_p helper that takes care of the differences between the directory format with and without the file type field. Signed-off-by:
-
Christoph Hellwig authored
Replace the ->data_entsize dir ops method with a directly called xfs_dir2_data_entsize helper that takes care of the differences between the directory format with and without the file type field. Signed-off-by:
-
Christoph Hellwig authored
All the callers really want an offset into the buffer, so adopt the helper to return that instead. Signed-off-by:
-
Christoph Hellwig authored
Now that all users use the data_entry_offset field this method is unused and can be removed. Signed-off-by:
-
Christoph Hellwig authored
Use an offset as the main means for iteration, and only do pointer arithmetics to find the data/unused entries. Signed-off-by:
-
Christoph Hellwig authored
Use an offset as the main means for iteration, and only do pointer arithmetics to find the data/unused entries. Signed-off-by:
-
Christoph Hellwig authored
Use an offset as the main means for iteration, and only do pointer arithmetics to find the data/unused entries. Signed-off-by:
-
Christoph Hellwig authored
Use an offset as the main means for iteration, and only do pointer arithmetics to find the data/unused entries. Signed-off-by:
-
Christoph Hellwig authored
Use an offset as the main means for iteration, and only do pointer arithmetics to find the data/unused entries. Signed-off-by:
-
Christoph Hellwig authored
Use an offset as the main means for iteration, and only do pointer arithmetics to find the data/unused entries. Signed-off-by:
-
Christoph Hellwig authored
Use an offset as the main means for iteration, and only do pointer arithmetics to find the data/unused entries. Signed-off-by:
-
Christoph Hellwig authored
Replace the two users of the ->data_unused_p dir ops method with a direct calculation using ->data_entry_offset, and clean them up a bit. xfs_dir2_sf_to_block already had an offset variable containing the value of ->data_entry_offset, which we are now reusing to make it clear that the initial freespace entry is at the same place that we later fill in the 1 entry, and in xfs_dir3_data_init the function is cleaned up a bit to keep the initialization of fields of a given structure close to each other, and to avoid a local variable. Signed-off-by:
-
Christoph Hellwig authored
The only user of the ->data_dot_entry_p and ->data_dotdot_entry_p methods is the xfs_dir2_sf_to_block function that builds block format directorys from a short form directory. It already uses pointer arithmetics with a offset variable to do so for the real entries in the directory, so switch the generation of the . and .. entries to the same scheme, and clean up some of the later pointer arithmetics to use bp->b_addr directly as well and avoid some casts. Signed-off-by:
-
Christoph Hellwig authored
The data_dotdot_offset value is always equal to data_entry_offset plus the fixed size of the "." entry. Right now calculating that fixed size requires an indirect call, but by the end of this series it will be an inline function that can be constant folded. Signed-off-by:
-
Christoph Hellwig authored
The data_dot_offset value is always equal to data_entry_offset given that "." is always the first entry in the directory. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Replace the ->sf_get_ftype and ->sf_put_ftype dir ops methods with directly called xfs_dir2_sf_get_ftype and xfs_dir2_sf_put_ftype helpers that takes care of the differences between the directory format with and without the file type field. Signed-off-by:
-
Christoph Hellwig authored
Replace the ->sf_get_ino and ->sf_put_ino dir ops methods with directly called xfs_dir2_sf_get_ino and xfs_dir2_sf_put_ino helpers that take care of the difference between the directory format with and without the file type field. Also move xfs_dir2_sf_get_parent_ino and xfs_dir2_sf_put_parent_ino to xfs_dir2_sf.c with the rest of the low-level short form entry handling and use XFS_MAXINUMBER istead of opencoded constants. Signed-off-by:
-
Christoph Hellwig authored
Just check for file-type enabled directories directly. Signed-off-by:
-
Christoph Hellwig authored
The parent inode handling is the same for all directory format variants, just use direct calls instead of going through a pointless indirect call. Signed-off-by:
-
Christoph Hellwig authored
Now that the max bests value is in struct xfs_da_geometry both instances of ->db_to_fdb and ->db_to_fdindex are identical. Replace them with local xfs_dir2_db_to_fdb and xfs_dir2_db_to_fdindex functions in xfs_dir2_node.c. Signed-off-by:
-
Christoph Hellwig authored
Move the max free bests count towards our structure for dir/attr geometry parameters. Signed-off-by:
-
Christoph Hellwig authored
Move the free header size towards our structure for dir/attr geometry parameters. Signed-off-by:
-
Christoph Hellwig authored
All but two callers of the ->free_bests_p dir operation already have a struct xfs_dir3_icfree_hdr from a previous call to xfs_dir2_free_hdr_from_disk at hand. Add a pointer to the bests to struct xfs_dir3_icfree_hdr to clean up this pattern. To optimize this pattern, pass the struct xfs_dir3_icfree_hdr to xfs_dir2_free_log_bests instead of recalculating the pointer there. Signed-off-by:
-
Christoph Hellwig authored
Return the xfs_dir3_icfree_hdr used by the helpers called from xfs_dir2_node_addname_int to the main function to prepare for the next round of changes where we'll use the ichdr in xfs_dir3_icfree_hdr to avoid extra operations to find the bests pointers. Signed-off-by:
-
Christoph Hellwig authored
Replace the ->free_hdr_to_disk dir ops method with a directly called xfs_dir2_free_hdr_to_disk helper that takes care of the differences between the v4 and v5 on-disk format. Signed-off-by:
-
Christoph Hellwig authored
Replace the ->free_hdr_from_disk dir ops method with a directly called xfs_dir_free_hdr_from_disk helper that takes care of the differences between the v4 and v5 on-disk format. Signed-off-by:
-
Christoph Hellwig authored
Move the max leaf entries count towards our structure for dir/attr geometry parameters. Signed-off-by:
-
Christoph Hellwig authored
Move the leaf header size towards our structure for dir/attr geometry parameters. Signed-off-by:
-
Christoph Hellwig authored
All callers of the ->node_tree_p dir operation already have a struct xfs_dir3_icleaf_hdr from a previous call to xfs_da_leaf_hdr_from_disk at hand, or just need slight changes to the calling conventions to do so. Add a pointer to the entries to struct xfs_dir3_icleaf_hdr to clean up this pattern. To make this possible the xfs_dir3_leaf_log_ents function grow a new argument to pass the xfs_dir3_icleaf_hdr that call callers already have, and xfs_dir2_leaf_lookup_int returns the xfs_dir3_icleaf_hdr to the callers so that they can later use it. Signed-off-by:
-
